Update freetype sources (2.6.2) in third party.

third_party/freetype2/src/src/gzip/zlib.h

Index: third_party/freetype2/src/src/gzip/zlib.h
diff --git a/third_party/freetype2/src/src/gzip/zlib.h b/third_party/freetype2/src/src/gzip/zlib.h
new file mode 100644
index 0000000000000000000000000000000000000000..50d0d3f146d85c6dbba9706594de8de71deffd51
--- /dev/null
+++ b/third_party/freetype2/src/src/gzip/zlib.h
@@ -0,0 +1,830 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.1.4, March 11th, 2002
+
+  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.1.4"
+
+/*
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms will be added later and will have the same
+  stream interface.
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: ascii or binary */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+   The application must update next_in and avail_in when avail_in has
+   dropped to zero. It must update next_out and avail_out when avail_out
+   has dropped to zero. The application must initialize zalloc, zfree and
+   opaque before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application.
+
+   The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   opaque value.
+
+   zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+   On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+   The fields total_in and total_out can be used for statistics or
+   progress reports. After compression, total_in holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+/* Allowed flush values; see deflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+
+                        /* basic functions */
+
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+   This check is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN(int)  deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression. The fields
+   zalloc, zfree and opaque must be initialized before by the caller.
+   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
+   use default allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at
+   all (the input data is simply copied a block at a time).
+   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+   compression (currently equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).
+   msg is set to null if there is no error message.  deflateInit does not
+   perform any compression: this will be done by deflate().
+*/
+
+
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows. deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly. This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).
+    Some output may be provided even if flush is not set.
+
+  Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating avail_in or avail_out accordingly; avail_out
+  should never be zero before the call. The application can consume the
+  compressed output when it wants, for example when the output buffer is full
+  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+  and with zero avail_out, it must be called again after making room in the
+  output buffer because there might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  avail_in is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+  the compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there
+  was enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error. After
+  deflate has returned Z_STREAM_END, the only possible operations on the
+  stream are deflateReset or deflateEnd.
+
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step. In this case, avail_out must be at least
+  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
+  Z_STREAM_END, then it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update data_type if it can make a good guess about
+  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+  binary. This field is only for information purposes and does not affect
+  the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).
+*/
+
+
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded). In the error case,
+   msg may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/*
+ZEXTERN(int)  inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression. The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
+   value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller.  msg is set to null if there is no error
+   message. inflateInit does not perform any decompression apart from reading
+   the zlib header if present: this will be done by inflate().  (So next_in and
+   avail_in may be modified, but next_out and avail_out are unchanged.)
+*/
+
+
+ZEXTERN(int) inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+
+  The detailed semantics are as follows. inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing
+    will resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there
+    is no more input data or no more space in the output buffer (see below
+    about the flush parameter).
+
+  Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (avail_out == 0), or after each
+  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
+  output as possible to the output buffer. The flushing behavior of inflate is
+  not specified for values of the flush parameter other than Z_SYNC_FLUSH
+  and Z_FINISH, but the current implementation actually flushes as much output
+  as possible anyway.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of inflate), the parameter flush should be set to
+  Z_FINISH. In this case all pending input is processed and all pending
+  output is flushed; avail_out must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+  is never required, but can be used to inform inflate that a faster routine
+  may be used for the single inflate() call.
+
+     If a preset dictionary is needed at this point (see inflateSetDictionary
+  below), inflate sets strm-adler to the adler32 checksum of the
+  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
+  it sets strm->adler to the adler32 checksum of all output produced
+  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
+  an error code as described below. At the end of the stream, inflate()
+  checks that its computed adler32 checksum is equal to that saved by the
+  compressor and returns Z_STREAM_END only if the checksum is correct.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+  case, the application may then call inflateSync to look for a good
+  compression block.
+*/
+
+
+ZEXTERN(int)  inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent. In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN(int)  deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options. The
+   fields next_in, zalloc, zfree and opaque must be initialized before by
+   the caller.
+
+     The method parameter is the compression method. It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   deflateInit is used instead.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state. memLevel=1 uses minimum memory but
+   is slow and reduces compression ratio; memLevel=9 uses maximum memory
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm. Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match).  Filtered data consists mostly of small values with a
+   somewhat random distribution. In this case, the compression algorithm is
+   tuned to compress them better. The effect of Z_FILTERED is to force more
+   Huffman coding and less string matching; it is somewhat intermediate
+   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+   the compression ratio but not the correctness of the compressed output even
+   if it is not set appropriately.
+
+      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+   method). msg is set to null if there is no error message.  deflateInit2 does
+   not perform any compression: this will be done by deflate().
+*/
+
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any
+   call of deflate. The compressor and decompressor must use exactly the same
+   dictionary (see inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary. Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   deflate or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.
+
+     Upon return of this function, strm->adler is set to the Adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor. (The Adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.)
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort). deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
+*/
+
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter. The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and
+   can consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being NULL). msg is left unchanged in both source and
+   destination.
+*/
+
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.
+   The stream will keep the same compression level and any other attributes
+   that may have been set by deflateInit2.
+
+      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to
+   be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+   if strm->avail_out was zero.
+*/
+
+/*
+ZEXTERN(int)  inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter. The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library. The default value is 15 if inflateInit is used
+   instead. If a compressed stream with a larger window size is given as
+   input, inflate() will return with the error code Z_DATA_ERROR instead of
+   trying to allocate a larger window.
+
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
+   memLevel). msg is set to null if there is no error message.  inflateInit2
+   does not perform any decompression apart from reading the zlib header if
+   present: this will be done by inflate(). (So next_in and avail_in may be
+   modified, but next_out and avail_out are unchanged.)
+*/
+
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of inflate
+   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   can be determined from the Adler32 value returned by this call of
+   inflate. The compressor and decompressor must use exactly the same
+   dictionary (see deflateSetDictionary).
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect Adler32 value). inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+/*
+    Skips invalid compressed data until a full flush point (see above the
+  description of deflate with Z_FULL_FLUSH) can be found, or until all
+  available input is skipped. No output is provided.
+
+    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of total_in which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call inflateSync, providing more input each time,
+  until success or end of the input data.
+*/
+
+ZEXTERN(int)  inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.
+   The stream will keep attributes that may have been set by inflateInit2.
+
+      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the
+   basic stream-oriented functions. To simplify the interface, some
+   default options are assumed (compression level and memory usage,
+   standard memory allocation functions). The source code of these
+   utility functions can easily be modified if you need special options.
+*/
+
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be at least 0.1% larger than
+   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+   compressed buffer.
+     This function can be used to compress a whole file at once if the
+   input file is mmap'ed.
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+/*
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer.
+     This function can be used to decompress a whole file at once if the
+   input file is mmap'ed.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+
+
+/*
+     Opens a gzip (.gz) file for reading or writing. The mode parameter
+   is as in fopen ("rb" or "wb") but can also include a compression level
+   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+   Huffman only compression as in "wb1h". (See the description
+   of deflateInit2 for more information about the strategy parameter.)
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.
+
+     gzopen returns NULL if the file could not be opened or if there was
+   insufficient memory to allocate the (de)compression state; errno
+   can be checked to distinguish the two cases (if errno is zero, the
+   zlib error is Z_MEM_ERROR).  */
+
+/*
+     gzdopen() associates a gzFile with the file descriptor fd.  File
+   descriptors are obtained from calls like open, dup, creat, pipe or
+   fileno (in the file has been previously opened with fopen).
+   The mode parameter is as in gzopen.
+     The next call of gzclose on the returned gzFile will also close the
+   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
+     gzdopen returns NULL if there was insufficient memory to allocate
+   the (de)compression state.
+*/
+
+/*
+     Dynamically update the compression level or strategy. See the description
+   of deflateInit2 for the meaning of these parameters.
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+/*
+     Reads the given number of uncompressed bytes from the compressed file.
+   If the input file was not in gzip format, gzread copies the given number
+   of bytes into the buffer.
+     gzread returns the number of uncompressed bytes actually read (0 for
+   end of file, -1 for error). */
+
+/*
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of uncompressed bytes actually written
+   (0 in case of error).
+*/
+
+/*
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+
+/*
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+/*
+      Reads bytes from the compressed file until len-1 characters are read, or
+   a newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  The string is then terminated with a null
+   character.
+      gzgets returns buf, or Z_NULL in case of error.
+*/
+
+/*
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+
+/*
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+
+/*
+     Flushes all pending output into the compressed file. The parameter
+   flush is as in the deflate() function. The return value is the zlib
+   error number (see function gzerror below). gzflush returns Z_OK if
+   the flush parameter is Z_FINISH and all output could be flushed.
+     gzflush should be called only when strictly necessary because it can
+   degrade compression.
+*/
+
+/*
+      Sets the starting position for the next gzread or gzwrite on the
+   given compressed file. The offset represents a number of bytes in the
+   uncompressed data stream. The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow. If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+   gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+
+   gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+
+/*
+     Flushes all pending output if necessary, closes the compressed file
+   and deallocates all the (de)compression state. The return value is the zlib
+   error number (see function gzerror below).
+*/
+
+/*
+     Returns the error message for the last error which occurred on the
+   given compressed file. errnum is set to zlib error number. If an
+   error occurred in the file system and not in the compression library,
+   errnum is set to Z_ERRNO and the application may consult errno
+   to get the exact error code.
+*/
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the
+   compression library.
+*/
+
+ZEXTERN(uLong)  adler32 OF((uLong adler, const Bytef *buf, uInt len));
+
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+/*
+     Update a running crc with the bytes buf[0..len-1] and return the updated
+   crc. If buf is NULL, this function returns the required initial value
+   for the crc. Pre- and post-conditioning (one's complement) is performed
+   within this function so it shouldn't be done by the application.
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN(int)  inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+#define deflateInit(strm, level) \
+        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ZLIB_H */