| Index: third_party/freetype2/src/src/truetype/ttobjs.h
|
| diff --git a/third_party/freetype2/src/src/truetype/ttobjs.h b/third_party/freetype2/src/src/truetype/ttobjs.h
|
| new file mode 100644
|
| index 0000000000000000000000000000000000000000..9396089a991168a61dfc3663e18d7648cb64e9e7
|
| --- /dev/null
|
| +++ b/third_party/freetype2/src/src/truetype/ttobjs.h
|
| @@ -0,0 +1,425 @@
|
| +/***************************************************************************/
|
| +/* */
|
| +/* ttobjs.h */
|
| +/* */
|
| +/* Objects manager (specification). */
|
| +/* */
|
| +/* Copyright 1996-2015 by */
|
| +/* David Turner, Robert Wilhelm, and Werner Lemberg. */
|
| +/* */
|
| +/* This file is part of the FreeType project, and may only be used, */
|
| +/* modified, and distributed under the terms of the FreeType project */
|
| +/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
|
| +/* this file you indicate that you have read the license and */
|
| +/* understand and accept it fully. */
|
| +/* */
|
| +/***************************************************************************/
|
| +
|
| +
|
| +#ifndef __TTOBJS_H__
|
| +#define __TTOBJS_H__
|
| +
|
| +
|
| +#include <ft2build.h>
|
| +#include FT_INTERNAL_OBJECTS_H
|
| +#include FT_INTERNAL_TRUETYPE_TYPES_H
|
| +
|
| +
|
| +FT_BEGIN_HEADER
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* <Type> */
|
| + /* TT_Driver */
|
| + /* */
|
| + /* <Description> */
|
| + /* A handle to a TrueType driver object. */
|
| + /* */
|
| + typedef struct TT_DriverRec_* TT_Driver;
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* <Type> */
|
| + /* TT_GlyphSlot */
|
| + /* */
|
| + /* <Description> */
|
| + /* A handle to a TrueType glyph slot object. */
|
| + /* */
|
| + /* <Note> */
|
| + /* This is a direct typedef of FT_GlyphSlot, as there is nothing */
|
| + /* specific about the TrueType glyph slot. */
|
| + /* */
|
| + typedef FT_GlyphSlot TT_GlyphSlot;
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* <Struct> */
|
| + /* TT_GraphicsState */
|
| + /* */
|
| + /* <Description> */
|
| + /* The TrueType graphics state used during bytecode interpretation. */
|
| + /* */
|
| + typedef struct TT_GraphicsState_
|
| + {
|
| + FT_UShort rp0;
|
| + FT_UShort rp1;
|
| + FT_UShort rp2;
|
| +
|
| + FT_UnitVector dualVector;
|
| + FT_UnitVector projVector;
|
| + FT_UnitVector freeVector;
|
| +
|
| +#ifdef TT_CONFIG_OPTION_UNPATENTED_HINTING
|
| + FT_Bool both_x_axis;
|
| +#endif
|
| +
|
| + FT_Long loop;
|
| + FT_F26Dot6 minimum_distance;
|
| + FT_Int round_state;
|
| +
|
| + FT_Bool auto_flip;
|
| + FT_F26Dot6 control_value_cutin;
|
| + FT_F26Dot6 single_width_cutin;
|
| + FT_F26Dot6 single_width_value;
|
| + FT_UShort delta_base;
|
| + FT_UShort delta_shift;
|
| +
|
| + FT_Byte instruct_control;
|
| + /* According to Greg Hitchcock from Microsoft, the `scan_control' */
|
| + /* variable as documented in the TrueType specification is a 32-bit */
|
| + /* integer; the high-word part holds the SCANTYPE value, the low-word */
|
| + /* part the SCANCTRL value. We separate it into two fields. */
|
| + FT_Bool scan_control;
|
| + FT_Int scan_type;
|
| +
|
| + FT_UShort gep0;
|
| + FT_UShort gep1;
|
| + FT_UShort gep2;
|
| +
|
| + } TT_GraphicsState;
|
| +
|
| +
|
| +#ifdef TT_USE_BYTECODE_INTERPRETER
|
| +
|
| + FT_LOCAL( void )
|
| + tt_glyphzone_done( TT_GlyphZone zone );
|
| +
|
| + FT_LOCAL( FT_Error )
|
| + tt_glyphzone_new( FT_Memory memory,
|
| + FT_UShort maxPoints,
|
| + FT_Short maxContours,
|
| + TT_GlyphZone zone );
|
| +
|
| +#endif /* TT_USE_BYTECODE_INTERPRETER */
|
| +
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* EXECUTION SUBTABLES */
|
| + /* */
|
| + /* These sub-tables relate to instruction execution. */
|
| + /* */
|
| + /*************************************************************************/
|
| +
|
| +
|
| +#define TT_MAX_CODE_RANGES 3
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* There can only be 3 active code ranges at once: */
|
| + /* - the Font Program */
|
| + /* - the CVT Program */
|
| + /* - a glyph's instructions set */
|
| + /* */
|
| + typedef enum TT_CodeRange_Tag_
|
| + {
|
| + tt_coderange_none = 0,
|
| + tt_coderange_font,
|
| + tt_coderange_cvt,
|
| + tt_coderange_glyph
|
| +
|
| + } TT_CodeRange_Tag;
|
| +
|
| +
|
| + typedef struct TT_CodeRange_
|
| + {
|
| + FT_Byte* base;
|
| + FT_Long size;
|
| +
|
| + } TT_CodeRange;
|
| +
|
| + typedef TT_CodeRange TT_CodeRangeTable[TT_MAX_CODE_RANGES];
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* Defines a function/instruction definition record. */
|
| + /* */
|
| + typedef struct TT_DefRecord_
|
| + {
|
| + FT_Int range; /* in which code range is it located? */
|
| + FT_Long start; /* where does it start? */
|
| + FT_Long end; /* where does it end? */
|
| + FT_UInt opc; /* function #, or instruction code */
|
| + FT_Bool active; /* is it active? */
|
| + FT_Bool inline_delta; /* is function that defines inline delta? */
|
| + FT_ULong sph_fdef_flags; /* flags to identify special functions */
|
| +
|
| + } TT_DefRecord, *TT_DefArray;
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* Subglyph transformation record. */
|
| + /* */
|
| + typedef struct TT_Transform_
|
| + {
|
| + FT_Fixed xx, xy; /* transformation matrix coefficients */
|
| + FT_Fixed yx, yy;
|
| + FT_F26Dot6 ox, oy; /* offsets */
|
| +
|
| + } TT_Transform;
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* A note regarding non-squared pixels: */
|
| + /* */
|
| + /* (This text will probably go into some docs at some time; for now, it */
|
| + /* is kept here to explain some definitions in the TT_Size_Metrics */
|
| + /* record). */
|
| + /* */
|
| + /* The CVT is a one-dimensional array containing values that control */
|
| + /* certain important characteristics in a font, like the height of all */
|
| + /* capitals, all lowercase letter, default spacing or stem width/height. */
|
| + /* */
|
| + /* These values are found in FUnits in the font file, and must be scaled */
|
| + /* to pixel coordinates before being used by the CVT and glyph programs. */
|
| + /* Unfortunately, when using distinct x and y resolutions (or distinct x */
|
| + /* and y pointsizes), there are two possible scalings. */
|
| + /* */
|
| + /* A first try was to implement a `lazy' scheme where all values were */
|
| + /* scaled when first used. However, while some values are always used */
|
| + /* in the same direction, some others are used under many different */
|
| + /* circumstances and orientations. */
|
| + /* */
|
| + /* I have found a simpler way to do the same, and it even seems to work */
|
| + /* in most of the cases: */
|
| + /* */
|
| + /* - All CVT values are scaled to the maximum ppem size. */
|
| + /* */
|
| + /* - When performing a read or write in the CVT, a ratio factor is used */
|
| + /* to perform adequate scaling. Example: */
|
| + /* */
|
| + /* x_ppem = 14 */
|
| + /* y_ppem = 10 */
|
| + /* */
|
| + /* We choose ppem = x_ppem = 14 as the CVT scaling size. All cvt */
|
| + /* entries are scaled to it. */
|
| + /* */
|
| + /* x_ratio = 1.0 */
|
| + /* y_ratio = y_ppem/ppem (< 1.0) */
|
| + /* */
|
| + /* We compute the current ratio like: */
|
| + /* */
|
| + /* - If projVector is horizontal, */
|
| + /* ratio = x_ratio = 1.0 */
|
| + /* */
|
| + /* - if projVector is vertical, */
|
| + /* ratio = y_ratio */
|
| + /* */
|
| + /* - else, */
|
| + /* ratio = sqrt( (proj.x * x_ratio) ^ 2 + (proj.y * y_ratio) ^ 2 ) */
|
| + /* */
|
| + /* Reading a cvt value returns */
|
| + /* ratio * cvt[index] */
|
| + /* */
|
| + /* Writing a cvt value in pixels: */
|
| + /* cvt[index] / ratio */
|
| + /* */
|
| + /* The current ppem is simply */
|
| + /* ratio * ppem */
|
| + /* */
|
| + /*************************************************************************/
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* Metrics used by the TrueType size and context objects. */
|
| + /* */
|
| + typedef struct TT_Size_Metrics_
|
| + {
|
| + /* for non-square pixels */
|
| + FT_Long x_ratio;
|
| + FT_Long y_ratio;
|
| +
|
| + FT_UShort ppem; /* maximum ppem size */
|
| + FT_Long ratio; /* current ratio */
|
| + FT_Fixed scale;
|
| +
|
| + FT_F26Dot6 compensations[4]; /* device-specific compensations */
|
| +
|
| + FT_Bool valid;
|
| +
|
| + FT_Bool rotated; /* `is the glyph rotated?'-flag */
|
| + FT_Bool stretched; /* `is the glyph stretched?'-flag */
|
| +
|
| + } TT_Size_Metrics;
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* TrueType size class. */
|
| + /* */
|
| + typedef struct TT_SizeRec_
|
| + {
|
| + FT_SizeRec root;
|
| +
|
| + /* we have our own copy of metrics so that we can modify */
|
| + /* it without affecting auto-hinting (when used) */
|
| + FT_Size_Metrics metrics;
|
| +
|
| + TT_Size_Metrics ttmetrics;
|
| +
|
| + FT_ULong strike_index; /* 0xFFFFFFFF to indicate invalid */
|
| +
|
| +#ifdef TT_USE_BYTECODE_INTERPRETER
|
| +
|
| + FT_UInt num_function_defs; /* number of function definitions */
|
| + FT_UInt max_function_defs;
|
| + TT_DefArray function_defs; /* table of function definitions */
|
| +
|
| + FT_UInt num_instruction_defs; /* number of ins. definitions */
|
| + FT_UInt max_instruction_defs;
|
| + TT_DefArray instruction_defs; /* table of ins. definitions */
|
| +
|
| + FT_UInt max_func;
|
| + FT_UInt max_ins;
|
| +
|
| + TT_CodeRangeTable codeRangeTable;
|
| +
|
| + TT_GraphicsState GS;
|
| +
|
| + FT_ULong cvt_size; /* the scaled control value table */
|
| + FT_Long* cvt;
|
| +
|
| + FT_UShort storage_size; /* The storage area is now part of */
|
| + FT_Long* storage; /* the instance */
|
| +
|
| + TT_GlyphZoneRec twilight; /* The instance's twilight zone */
|
| +
|
| + TT_ExecContext context;
|
| +
|
| + /* if negative, `fpgm' (resp. `prep'), wasn't executed yet; */
|
| + /* otherwise it is the returned error code */
|
| + FT_Error bytecode_ready;
|
| + FT_Error cvt_ready;
|
| +
|
| +#endif /* TT_USE_BYTECODE_INTERPRETER */
|
| +
|
| + } TT_SizeRec;
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* TrueType driver class. */
|
| + /* */
|
| + typedef struct TT_DriverRec_
|
| + {
|
| + FT_DriverRec root;
|
| +
|
| + TT_GlyphZoneRec zone; /* glyph loader points zone */
|
| +
|
| + FT_UInt interpreter_version;
|
| +
|
| + } TT_DriverRec;
|
| +
|
| +
|
| + /* Note: All of the functions below (except tt_size_reset()) are used */
|
| + /* as function pointers in a FT_Driver_ClassRec. Therefore their */
|
| + /* parameters are of types FT_Face, FT_Size, etc., rather than TT_Face, */
|
| + /* TT_Size, etc., so that the compiler can confirm that the types and */
|
| + /* number of parameters are correct. In all cases the FT_xxx types are */
|
| + /* cast to their TT_xxx counterparts inside the functions since FreeType */
|
| + /* will always use the TT driver to create them. */
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* Face functions */
|
| + /* */
|
| + FT_LOCAL( FT_Error )
|
| + tt_face_init( FT_Stream stream,
|
| + FT_Face ttface, /* TT_Face */
|
| + FT_Int face_index,
|
| + FT_Int num_params,
|
| + FT_Parameter* params );
|
| +
|
| + FT_LOCAL( void )
|
| + tt_face_done( FT_Face ttface ); /* TT_Face */
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* Size functions */
|
| + /* */
|
| + FT_LOCAL( FT_Error )
|
| + tt_size_init( FT_Size ttsize ); /* TT_Size */
|
| +
|
| + FT_LOCAL( void )
|
| + tt_size_done( FT_Size ttsize ); /* TT_Size */
|
| +
|
| +#ifdef TT_USE_BYTECODE_INTERPRETER
|
| +
|
| + FT_LOCAL( FT_Error )
|
| + tt_size_run_fpgm( TT_Size size,
|
| + FT_Bool pedantic );
|
| +
|
| + FT_LOCAL( FT_Error )
|
| + tt_size_run_prep( TT_Size size,
|
| + FT_Bool pedantic );
|
| +
|
| + FT_LOCAL( FT_Error )
|
| + tt_size_ready_bytecode( TT_Size size,
|
| + FT_Bool pedantic );
|
| +
|
| +#endif /* TT_USE_BYTECODE_INTERPRETER */
|
| +
|
| + FT_LOCAL( FT_Error )
|
| + tt_size_reset( TT_Size size );
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* Driver functions */
|
| + /* */
|
| + FT_LOCAL( FT_Error )
|
| + tt_driver_init( FT_Module ttdriver ); /* TT_Driver */
|
| +
|
| + FT_LOCAL( void )
|
| + tt_driver_done( FT_Module ttdriver ); /* TT_Driver */
|
| +
|
| +
|
| + /*************************************************************************/
|
| + /* */
|
| + /* Slot functions */
|
| + /* */
|
| + FT_LOCAL( FT_Error )
|
| + tt_slot_init( FT_GlyphSlot slot );
|
| +
|
| +
|
| + /* auxiliary */
|
| +#define IS_HINTED( flags ) ( ( flags & FT_LOAD_NO_HINTING ) == 0 )
|
| +
|
| +
|
| +FT_END_HEADER
|
| +
|
| +#endif /* __TTOBJS_H__ */
|
| +
|
| +
|
| +/* END */
|
|
|