A64: Synchronize with r17807.

src/math.js

 // Copyright 2012 the V8 project authors. All rights reserved.
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are
 // met:
 //
 //     * Redistributions of source code must retain the above copyright
 //       notice, this list of conditions and the following disclaimer.
 //     * Redistributions in binary form must reproduce the above
 //       copyright notice, this list of conditions and the following
 //       disclaimer in the documentation and/or other materials provided
@@ skipping 61 matching lines @@
   return %Math_atan2(TO_NUMBER_INLINE(y), TO_NUMBER_INLINE(x));
 }
 
 // ECMA 262 - 15.8.2.6
 function MathCeil(x) {
   return %Math_ceil(TO_NUMBER_INLINE(x));
 }
 
 // ECMA 262 - 15.8.2.7
 function MathCos(x) {
-  return %_MathCos(TO_NUMBER_INLINE(x));
+  return MathCosImpl(x);
 }
 
 // ECMA 262 - 15.8.2.8
 function MathExp(x) {
   return %Math_exp(TO_NUMBER_INLINE(x));
 }
 
 // ECMA 262 - 15.8.2.9
 function MathFloor(x) {
   x = TO_NUMBER_INLINE(x);
@@ skipping 17 matching lines @@
 
 // ECMA 262 - 15.8.2.11
 function MathMax(arg1, arg2) {  // length == 2
   var length = %_ArgumentsLength();
   if (length == 2) {
     arg1 = TO_NUMBER_INLINE(arg1);
     arg2 = TO_NUMBER_INLINE(arg2);
     if (arg2 > arg1) return arg2;
     if (arg1 > arg2) return arg1;
     if (arg1 == arg2) {
-      // Make sure -0 is considered less than +0.  -0 is never a Smi, +0 can be
-      // a Smi or a heap number.
-      return (arg1 == 0 && !%_IsSmi(arg1) && 1 / arg1 < 0) ? arg2 : arg1;
+      // Make sure -0 is considered less than +0.
+      return (arg1 === 0 && %_IsMinusZero(arg1)) ? arg2 : arg1;
     }
     // All comparisons failed, one of the arguments must be NaN.
     return NAN;
   }
   var r = -INFINITY;
   for (var i = 0; i < length; i++) {
     var n = %_Arguments(i);
     if (!IS_NUMBER(n)) n = NonNumberToNumber(n);
-    // Make sure +0 is considered greater than -0.  -0 is never a Smi, +0 can be
-    // a Smi or heap number.
-    if (NUMBER_IS_NAN(n) || n > r ||
-        (r == 0 && n == 0 && !%_IsSmi(r) && 1 / r < 0)) {
+    // Make sure +0 is considered greater than -0.
+    if (NUMBER_IS_NAN(n) || n > r || (r === 0 && n === 0 && %_IsMinusZero(r))) {
       r = n;
     }
   }
   return r;
 }
 
 // ECMA 262 - 15.8.2.12
 function MathMin(arg1, arg2) {  // length == 2
   var length = %_ArgumentsLength();
   if (length == 2) {
     arg1 = TO_NUMBER_INLINE(arg1);
     arg2 = TO_NUMBER_INLINE(arg2);
     if (arg2 > arg1) return arg1;
     if (arg1 > arg2) return arg2;
     if (arg1 == arg2) {
-      // Make sure -0 is considered less than +0.  -0 is never a Smi, +0 can be
-      // a Smi or a heap number.
-      return (arg1 == 0 && !%_IsSmi(arg1) && 1 / arg1 < 0) ? arg1 : arg2;
+      // Make sure -0 is considered less than +0.
+      return (arg1 === 0 && %_IsMinusZero(arg1)) ? arg1 : arg2;
     }
     // All comparisons failed, one of the arguments must be NaN.
     return NAN;
   }
   var r = INFINITY;
   for (var i = 0; i < length; i++) {
     var n = %_Arguments(i);
     if (!IS_NUMBER(n)) n = NonNumberToNumber(n);
-    // Make sure -0 is considered less than +0.  -0 is never a Smi, +0 can be a
-    // Smi or a heap number.
-    if (NUMBER_IS_NAN(n) || n < r ||
-        (r == 0 && n == 0 && !%_IsSmi(n) && 1 / n < 0)) {
+    // Make sure -0 is considered less than +0.
+    if (NUMBER_IS_NAN(n) || n < r || (r === 0 && n === 0 && %_IsMinusZero(n))) {
       r = n;
     }
   }
   return r;
 }
 
 // ECMA 262 - 15.8.2.13
 function MathPow(x, y) {
   return %_MathPow(TO_NUMBER_INLINE(x), TO_NUMBER_INLINE(y));
 }
 
 // ECMA 262 - 15.8.2.14
 function MathRandom() {
   return %_RandomHeapNumber();
 }
 
 // ECMA 262 - 15.8.2.15
 function MathRound(x) {
   return %RoundNumber(TO_NUMBER_INLINE(x));
 }
 
 // ECMA 262 - 15.8.2.16
 function MathSin(x) {
-  return %_MathSin(TO_NUMBER_INLINE(x));
+  return MathSinImpl(x);
 }
 
 // ECMA 262 - 15.8.2.17
 function MathSqrt(x) {
   return %_MathSqrt(TO_NUMBER_INLINE(x));
 }
 
 // ECMA 262 - 15.8.2.18
 function MathTan(x) {
-  return %_MathTan(TO_NUMBER_INLINE(x));
+  return MathSinImpl(x) / MathCosImpl(x);
 }
 
 // Non-standard extension.
 function MathImul(x, y) {
   return %NumberImul(TO_NUMBER_INLINE(x), TO_NUMBER_INLINE(y));
 }
 
 
+var MathSinImpl = function(x) {
+  InitTrigonometricFunctions();
+  return MathSinImpl(x);
+}
+
+
+var MathCosImpl = function(x) {
+  InitTrigonometricFunctions();
+  return MathCosImpl(x);
+}
+
+
+var InitTrigonometricFunctions;
+
+
+// Define constants and interpolation functions.
+// Also define the initialization function that populates the lookup table
+// and then wires up the function definitions.
+function SetupTrigonometricFunctions() {
+  // TODO(yangguo): The following table size has been chosen to satisfy
+  // Sunspider's brittle result verification.  Reconsider relevance.
+  var samples = 4489;
+  var pi = 3.1415926535897932;
+  var pi_half = pi / 2;
+  var inverse_pi_half = 2 / pi;
+  var two_pi = 2 * pi;
+  var four_pi = 4 * pi;
+  var interval = pi_half / samples;
+  var inverse_interval = samples / pi_half;
+  var table_sin;
+  var table_cos_interval;
+
+  // This implements sine using the following algorithm.
+  // 1) Multiplication takes care of to-number conversion.
+  // 2) Reduce x to the first quadrant [0, pi/2].
+  //    Conveniently enough, in case of +/-Infinity, we get NaN.
+  // 3) Replace x by (pi/2-x) if x was in the 2nd or 4th quadrant.
+  // 4) Do a table lookup for the closest samples to the left and right of x.
+  // 5) Find the derivatives at those sampling points by table lookup:
+  //    dsin(x)/dx = cos(x) = sin(pi/2-x) for x in [0, pi/2].
+  // 6) Use cubic spline interpolation to approximate sin(x).
+  // 7) Negate the result if x was in the 3rd or 4th quadrant.
+  // 8) Get rid of -0 by adding 0.
+  var Interpolation = function(x) {
+    var double_index = x * inverse_interval;
+    var index = double_index | 0;
+    var t1 = double_index - index;
+    var t2 = 1 - t1;
+    var y1 = table_sin[index];
+    var y2 = table_sin[index + 1];
+    var dy = y2 - y1;
+    return (t2 * y1 + t1 * y2 +
+                t1 * t2 * ((table_cos_interval[index] - dy) * t2 +
+                           (dy - table_cos_interval[index + 1]) * t1));
+  }
+
+  var MathSinInterpolation = function(x) {
+    // This is to make Sunspider's result verification happy.
+    if (x > four_pi) x -= four_pi;
+    var multiple = MathFloor(x * inverse_pi_half);
+    if (%_IsMinusZero(multiple)) return multiple;
+    x = (multiple & 1) * pi_half +
+        (1 - ((multiple & 1) << 1)) * (x - multiple * pi_half);
+    return Interpolation(x) * (1 - (multiple & 2)) + 0;
+  }
+
+  // Cosine is sine with a phase offset of pi/2.
+  var MathCosInterpolation = function(x) {
+    var multiple = MathFloor(x * inverse_pi_half);
+    var phase = multiple + 1;
+    x = (phase & 1) * pi_half +
+        (1 - ((phase & 1) << 1)) * (x - multiple * pi_half);
+    return Interpolation(x) * (1 - (phase & 2)) + 0;
+  };
+
+  %SetInlineBuiltinFlag(Interpolation);
+  %SetInlineBuiltinFlag(MathSinInterpolation);
+  %SetInlineBuiltinFlag(MathCosInterpolation);
+
+  InitTrigonometricFunctions = function() {
+    table_sin = new global.Float64Array(samples + 2);
+    table_cos_interval = new global.Float64Array(samples + 2);
+    %PopulateTrigonometricTable(table_sin, table_cos_interval, samples);
+    MathSinImpl = MathSinInterpolation;
+    MathCosImpl = MathCosInterpolation;
+  }
+}
+
+SetupTrigonometricFunctions();
+
+
 // -------------------------------------------------------------------
 
 function SetUpMath() {
   %CheckIsBootstrapping();
 
   %SetPrototype($Math, $Object.prototype);
   %SetProperty(global, "Math", $Math, DONT_ENUM);
   %FunctionSetInstanceClassName(MathConstructor, 'Math');
 
   // Set up math constants.
@@ skipping 52 matching lines @@
     "round", MathRound,
     "sin", MathSin,
     "sqrt", MathSqrt,
     "tan", MathTan,
     "atan2", MathAtan2,
     "pow", MathPow,
     "max", MathMax,
     "min", MathMin,
     "imul", MathImul
   ));
+
+  %SetInlineBuiltinFlag(MathSin);
+  %SetInlineBuiltinFlag(MathCos);
+  %SetInlineBuiltinFlag(MathTan);
 }
 
 SetUpMath();