Check Win32 Apache+PHP into third_party

third_party/apache-win32/conf/original/extra/httpd-ssl.conf

Index: third_party/apache-win32/conf/original/extra/httpd-ssl.conf
diff --git a/third_party/apache-win32/conf/original/extra/httpd-ssl.conf b/third_party/apache-win32/conf/original/extra/httpd-ssl.conf
new file mode 100644
index 0000000000000000000000000000000000000000..28b02e72c3d98d6d1edea0921ed77f403663a90c
--- /dev/null
+++ b/third_party/apache-win32/conf/original/extra/httpd-ssl.conf
@@ -0,0 +1,249 @@
+#
+# This is the Apache server configuration file providing SSL support.
+# It contains the configuration directives to instruct the server how to
+# serve pages over an https connection. For detailed information about these 
+# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
+# 
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+
+#
+# Pseudo Random Number Generator (PRNG):
+# Configure one or more sources to seed the PRNG of the SSL library.
+# The seed data should be of good random quality.
+# WARNING! On some platforms /dev/random blocks if not enough entropy
+# is available. This means you then cannot use the /dev/random device
+# because it would lead to very long connection times (as long as
+# it requires to make more entropy available). But usually those
+# platforms additionally provide a /dev/urandom device which doesn't
+# block. So, if available, use this one instead. Read the mod_ssl User
+# Manual for more details.
+#
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed startup file:/dev/urandom 512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+
+#
+# When we also provide SSL we have to listen to the 
+# standard HTTP port (see above) and to the HTTPS port
+#
+# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
+#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
+#
+Listen 443
+
+##
+##  SSL Global Context
+##
+##  All SSL configuration in this context applies both to
+##  the main server and all SSL-enabled virtual hosts.
+##
+
+#
+#   Some MIME-types for downloading Certificates and CRLs
+#
+AddType application/x-x509-ca-cert .crt
+AddType application/x-pkcs7-crl    .crl
+
+#   Pass Phrase Dialog:
+#   Configure the pass phrase gathering process.
+#   The filtering dialog program (`builtin' is a internal
+#   terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog  builtin
+
+#   Inter-Process Session Cache:
+#   Configure the SSL Session Cache: First the mechanism 
+#   to use and second the expiring timeout (in seconds).
+#SSLSessionCache         "dbm:D:/src/httpd/logs/ssl_scache"
+SSLSessionCache        "shmcb:D:/src/httpd/logs/ssl_scache(512000)"
+SSLSessionCacheTimeout  300
+
+#   Semaphore:
+#   Configure the path to the mutual exclusion semaphore the
+#   SSL engine uses internally for inter-process synchronization. 
+SSLMutex default
+
+##
+## SSL Virtual Host Context
+##
+
+<VirtualHost _default_:443>
+
+#   General setup for the virtual host
+DocumentRoot "D:/src/httpd/htdocs"
+ServerName :443
+ServerAdmin 
+ErrorLog "D:/src/httpd/logs/error.log"
+TransferLog "D:/src/httpd/logs/access.log"
+
+#   SSL Engine Switch:
+#   Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+#   SSL Protocol support:
+#   List the protocol versions which clients are allowed to
+#   connect with. Disable SSLv2 by default (cf. RFC 6176).
+SSLProtocol all -SSLv2
+
+#   SSL Cipher Suite:
+#   List the ciphers that the client is permitted to negotiate.
+#   See the mod_ssl documentation for a complete list.
+SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
+
+#   Speed-optimized SSL Cipher configuration:
+#   If speed is your main concern (on busy HTTPS servers e.g.),
+#   you might want to force clients to specific, performance
+#   optimized ciphers. In this case, prepend those ciphers
+#   to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
+#   Caveat: by giving precedence to RC4-SHA and AES128-SHA
+#   (as in the example below), most connections will no longer
+#   have perfect forward secrecy - if the server's key is
+#   compromised, captures of past or future traffic must be
+#   considered compromised, too.
+#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
+#SSLHonorCipherOrder on 
+ 
+#   Server Certificate:
+#   Point SSLCertificateFile at a PEM encoded certificate.  If
+#   the certificate is encrypted, then you will be prompted for a
+#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
+#   in mind that if you have both an RSA and a DSA certificate you
+#   can configure both in parallel (to also allow the use of DSA
+#   ciphers, etc.)
+SSLCertificateFile "D:/src/httpd/conf/server.crt"
+#SSLCertificateFile "D:/src/httpd/conf/server-dsa.crt"
+
+#   Server Private Key:
+#   If the key is not combined with the certificate, use this
+#   directive to point at the key file.  Keep in mind that if
+#   you've both a RSA and a DSA private key you can configure
+#   both in parallel (to also allow the use of DSA ciphers, etc.)
+SSLCertificateKeyFile "D:/src/httpd/conf/server.key"
+#SSLCertificateKeyFile "D:/src/httpd/conf/server-dsa.key"
+
+#   Server Certificate Chain:
+#   Point SSLCertificateChainFile at a file containing the
+#   concatenation of PEM encoded CA certificates which form the
+#   certificate chain for the server certificate. Alternatively
+#   the referenced file can be the same as SSLCertificateFile
+#   when the CA certificates are directly appended to the server
+#   certificate for convenience.
+#SSLCertificateChainFile "D:/src/httpd/conf/server-ca.crt"
+
+#   Certificate Authority (CA):
+#   Set the CA certificate verification path where to find CA
+#   certificates for client authentication or alternatively one
+#   huge file containing all of them (file must be PEM encoded)
+#   Note: Inside SSLCACertificatePath you need hash symlinks
+#         to point to the certificate files. Use the provided
+#         Makefile to update the hash symlinks after changes.
+#SSLCACertificatePath "D:/src/httpd/conf/ssl.crt"
+#SSLCACertificateFile "D:/src/httpd/conf/ssl.crt/ca-bundle.crt"
+
+#   Certificate Revocation Lists (CRL):
+#   Set the CA revocation path where to find CA CRLs for client
+#   authentication or alternatively one huge file containing all
+#   of them (file must be PEM encoded)
+#   Note: Inside SSLCARevocationPath you need hash symlinks
+#         to point to the certificate files. Use the provided
+#         Makefile to update the hash symlinks after changes.
+#SSLCARevocationPath "D:/src/httpd/conf/ssl.crl"
+#SSLCARevocationFile "D:/src/httpd/conf/ssl.crl/ca-bundle.crl"
+
+#   Client Authentication (Type):
+#   Client certificate verification type and depth.  Types are
+#   none, optional, require and optional_no_ca.  Depth is a
+#   number which specifies how deeply to verify the certificate
+#   issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth  10
+
+#   Access Control:
+#   With SSLRequire you can do per-directory access control based
+#   on arbitrary complex boolean expressions containing server
+#   variable checks and other lookup directives.  The syntax is a
+#   mixture between C and Perl.  See the mod_ssl documentation
+#   for more details.
+#<Location />
+#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
+#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+#   SSL Engine Options:
+#   Set various options for the SSL engine.
+#   o FakeBasicAuth:
+#     Translate the client X.509 into a Basic Authorisation.  This means that
+#     the standard Auth/DBMAuth methods can be used for access control.  The
+#     user name is the `one line' version of the client's X.509 certificate.
+#     Note that no password is obtained from the user. Every entry in the user
+#     file needs this password: `xxj31ZMTZzkVA'.
+#   o ExportCertData:
+#     This exports two additional environment variables: SSL_CLIENT_CERT and
+#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+#     server (always existing) and the client (only existing when client
+#     authentication is used). This can be used to import the certificates
+#     into CGI scripts.
+#   o StdEnvVars:
+#     This exports the standard SSL/TLS related `SSL_*' environment variables.
+#     Per default this exportation is switched off for performance reasons,
+#     because the extraction step is an expensive operation and is usually
+#     useless for serving static content. So one usually enables the
+#     exportation for CGI and SSI requests only.
+#   o StrictRequire:
+#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
+#     under a "Satisfy any" situation, i.e. when it applies access is denied
+#     and no other module can change it.
+#   o OptRenegotiate:
+#     This enables optimized SSL connection renegotiation handling when SSL
+#     directives are used in per-directory context. 
+#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+<FilesMatch "\.(cgi|shtml|phtml|php)$">
+    SSLOptions +StdEnvVars
+</FilesMatch>
+<Directory "D:/src/httpd/cgi-bin">
+    SSLOptions +StdEnvVars
+</Directory>
+
+#   SSL Protocol Adjustments:
+#   The safe and default but still SSL/TLS standard compliant shutdown
+#   approach is that mod_ssl sends the close notify alert but doesn't wait for
+#   the close notify alert from client. When you need a different shutdown
+#   approach you can use one of the following variables:
+#   o ssl-unclean-shutdown:
+#     This forces an unclean shutdown when the connection is closed, i.e. no
+#     SSL close notify alert is sent or allowed to be received.  This violates
+#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
+#     this when you receive I/O errors because of the standard approach where
+#     mod_ssl sends the close notify alert.
+#   o ssl-accurate-shutdown:
+#     This forces an accurate shutdown when the connection is closed, i.e. a
+#     SSL close notify alert is send and mod_ssl waits for the close notify
+#     alert of the client. This is 100% SSL/TLS standard compliant, but in
+#     practice often causes hanging connections with brain-dead browsers. Use
+#     this only for browsers where you know that their SSL implementation
+#     works correctly. 
+#   Notice: Most problems of broken clients are also related to the HTTP
+#   keep-alive facility, so you usually additionally want to disable
+#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
+#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
+#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+#   "force-response-1.0" for this.
+BrowserMatch "MSIE [2-5]" \
+         nokeepalive ssl-unclean-shutdown \
+         downgrade-1.0 force-response-1.0
+
+#   Per-Server Logging:
+#   The home of a custom SSL log file. Use this when you want a
+#   compact non-error SSL logfile on a virtual host basis.
+CustomLog "D:/src/httpd/logs/ssl_request.log" \
+          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+
+</VirtualHost>