Change the NSS and NSPR source tree to the new directory structure to be

mozilla/security/nss/lib/pkcs7/p7local.c

Index: mozilla/security/nss/lib/pkcs7/p7local.c
===================================================================
--- mozilla/security/nss/lib/pkcs7/p7local.c	(revision 191424)
+++ mozilla/security/nss/lib/pkcs7/p7local.c	(working copy)
@@ -1,1321 +0,0 @@
-/* This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
-
-/*
- * Support routines for PKCS7 implementation, none of which are exported.
- * This file should only contain things that are needed by both the
- * encoding/creation side *and* the decoding/decryption side.  Anything
- * else should be static routines in the appropriate file.
- *
- * $Id: p7local.c,v 1.16 2012/04/25 14:50:06 gerv%gerv.net Exp $
- */
-
-#include "p7local.h"
-
-#include "cryptohi.h" 
-#include "secasn1.h"
-#include "secoid.h"
-#include "secitem.h"
-#include "pk11func.h"
-#include "secpkcs5.h"
-#include "secerr.h"
-
-/*
- * -------------------------------------------------------------------
- * Cipher stuff.
- */
-
-typedef SECStatus (*sec_pkcs7_cipher_function) (void *,
-						unsigned char *,
-						unsigned *,
-						unsigned int,
-						const unsigned char *,
-						unsigned int);
-typedef SECStatus (*sec_pkcs7_cipher_destroy) (void *, PRBool);
-
-#define BLOCK_SIZE 4096
-
-struct sec_pkcs7_cipher_object {
-    void *cx;
-    sec_pkcs7_cipher_function doit;
-    sec_pkcs7_cipher_destroy destroy;
-    PRBool encrypt;
-    int block_size;
-    int pad_size;
-    int pending_count;
-    unsigned char pending_buf[BLOCK_SIZE];
-};
-
-SEC_ASN1_MKSUB(CERT_IssuerAndSNTemplate)
-SEC_ASN1_MKSUB(CERT_SetOfSignedCrlTemplate)
-SEC_ASN1_MKSUB(SECOID_AlgorithmIDTemplate)
-SEC_ASN1_MKSUB(SEC_OctetStringTemplate)
-SEC_ASN1_MKSUB(SEC_SetOfAnyTemplate)
-
-/*
- * Create a cipher object to do decryption,  based on the given bulk
- * encryption key and algorithm identifier (which may include an iv).
- *
- * XXX This interface, or one similar, would be really nice available
- * in general...  I tried to keep the pkcs7-specific stuff (mostly
- * having to do with padding) out of here.
- *
- * XXX Once both are working, it might be nice to combine this and the
- * function below (for starting up encryption) into one routine, and just
- * have two simple cover functions which call it. 
- */
-sec_PKCS7CipherObject *
-sec_PKCS7CreateDecryptObject (PK11SymKey *key, SECAlgorithmID *algid)
-{
-    sec_PKCS7CipherObject *result;
-    SECOidTag algtag;
-    void *ciphercx;
-    CK_MECHANISM_TYPE cryptoMechType;
-    PK11SlotInfo *slot;
-    SECItem *param = NULL;
-
-    result = (struct sec_pkcs7_cipher_object*)
-      PORT_ZAlloc (sizeof(struct sec_pkcs7_cipher_object));
-    if (result == NULL)
-	return NULL;
-
-    ciphercx = NULL;
-    algtag = SECOID_GetAlgorithmTag (algid);
-
-    if (SEC_PKCS5IsAlgorithmPBEAlg(algid)) {
-	SECItem *pwitem;
-
-	pwitem = (SECItem *)PK11_GetSymKeyUserData(key);
-	if (!pwitem) {
-	    PORT_Free(result);
-	    return NULL;
-	}
-
-	cryptoMechType = PK11_GetPBECryptoMechanism(algid, &param, pwitem);
-	if (cryptoMechType == CKM_INVALID_MECHANISM) {
-	    PORT_Free(result);
-	    SECITEM_FreeItem(param,PR_TRUE);
-	    return NULL;
-	}
-    } else {
-	cryptoMechType = PK11_AlgtagToMechanism(algtag);
-	param = PK11_ParamFromAlgid(algid);
-	if (param == NULL) {
-	    PORT_Free(result);
-	    return NULL;
-	}
-    }
-
-    result->pad_size = PK11_GetBlockSize(cryptoMechType, param);
-    slot = PK11_GetSlotFromKey(key);
-    result->block_size = PK11_IsHW(slot) ? BLOCK_SIZE : result->pad_size;
-    PK11_FreeSlot(slot);
-    ciphercx = PK11_CreateContextBySymKey(cryptoMechType, CKA_DECRYPT, 
-					  key, param);
-    SECITEM_FreeItem(param,PR_TRUE);
-    if (ciphercx == NULL) {
-	PORT_Free (result);
-	return NULL;
-    }
-
-    result->cx = ciphercx;
-    result->doit =  (sec_pkcs7_cipher_function) PK11_CipherOp;
-    result->destroy = (sec_pkcs7_cipher_destroy) PK11_DestroyContext;
-    result->encrypt = PR_FALSE;
-    result->pending_count = 0;
-
-    return result;
-}
-
-/*
- * Create a cipher object to do encryption, based on the given bulk
- * encryption key and algorithm tag.  Fill in the algorithm identifier
- * (which may include an iv) appropriately.
- *
- * XXX This interface, or one similar, would be really nice available
- * in general...  I tried to keep the pkcs7-specific stuff (mostly
- * having to do with padding) out of here.
- *
- * XXX Once both are working, it might be nice to combine this and the
- * function above (for starting up decryption) into one routine, and just
- * have two simple cover functions which call it. 
- */
-sec_PKCS7CipherObject *
-sec_PKCS7CreateEncryptObject (PRArenaPool *poolp, PK11SymKey *key,
-			      SECOidTag algtag, SECAlgorithmID *algid)
-{
-    sec_PKCS7CipherObject *result;
-    void *ciphercx;
-    SECStatus rv;
-    CK_MECHANISM_TYPE cryptoMechType;
-    PK11SlotInfo *slot;
-    SECItem *param = NULL;
-    PRBool needToEncodeAlgid = PR_FALSE;
-
-    result = (struct sec_pkcs7_cipher_object*)
-	      PORT_ZAlloc (sizeof(struct sec_pkcs7_cipher_object));
-    if (result == NULL)
-	return NULL;
-
-    ciphercx = NULL;
-    if (SEC_PKCS5IsAlgorithmPBEAlg(algid)) {
-	SECItem *pwitem;
-
-	pwitem = (SECItem *)PK11_GetSymKeyUserData(key);
-	if (!pwitem) {
-	    PORT_Free(result);
-	    return NULL;
-	}
-
-	cryptoMechType = PK11_GetPBECryptoMechanism(algid, &param, pwitem);
-	if (cryptoMechType == CKM_INVALID_MECHANISM) {
-	    PORT_Free(result);
-	    SECITEM_FreeItem(param,PR_TRUE);
-	    return NULL;
-	}
-    } else {
-	cryptoMechType = PK11_AlgtagToMechanism(algtag);
-	param = PK11_GenerateNewParam(cryptoMechType, key);
-	if (param == NULL) {
-	    PORT_Free(result);
-	    return NULL;
-	}
-	needToEncodeAlgid = PR_TRUE;
-    }
-
-    result->pad_size = PK11_GetBlockSize(cryptoMechType,param);
-    slot = PK11_GetSlotFromKey(key);
-    result->block_size = PK11_IsHW(slot) ? BLOCK_SIZE : result->pad_size;
-    PK11_FreeSlot(slot);
-    ciphercx = PK11_CreateContextBySymKey(cryptoMechType, CKA_ENCRYPT, 
-    					  key, param);
-    if (ciphercx == NULL) {
-	PORT_Free (result);
-        SECITEM_FreeItem(param,PR_TRUE);
-	return NULL;
-    }
-
-    /*
-     * These are placed after the CreateContextBySymKey() because some
-     * mechanisms have to generate their IVs from their card (i.e. FORTEZZA).
-     * Don't move it from here.
-     */
-    if (needToEncodeAlgid) {
-	rv = PK11_ParamToAlgid(algtag,param,poolp,algid);
-	if(rv != SECSuccess) {
-	    PORT_Free (result);
-            SECITEM_FreeItem(param,PR_TRUE);
-	    return NULL;
-	}
-    }
-    SECITEM_FreeItem(param,PR_TRUE);
-
-    result->cx = ciphercx;
-    result->doit = (sec_pkcs7_cipher_function) PK11_CipherOp;
-    result->destroy = (sec_pkcs7_cipher_destroy) PK11_DestroyContext;
-    result->encrypt = PR_TRUE;
-    result->pending_count = 0;
-
-    return result;
-}
-
-
-/*
- * Destroy the cipher object.
- */
-static void
-sec_pkcs7_destroy_cipher (sec_PKCS7CipherObject *obj)
-{
-    (* obj->destroy) (obj->cx, PR_TRUE);
-    PORT_Free (obj);
-}
-
-void
-sec_PKCS7DestroyDecryptObject (sec_PKCS7CipherObject *obj)
-{
-    PORT_Assert (obj != NULL);
-    if (obj == NULL)
-	return;
-    PORT_Assert (! obj->encrypt);
-    sec_pkcs7_destroy_cipher (obj);
-}
-
-void
-sec_PKCS7DestroyEncryptObject (sec_PKCS7CipherObject *obj)
-{
-    PORT_Assert (obj != NULL);
-    if (obj == NULL)
-	return;
-    PORT_Assert (obj->encrypt);
-    sec_pkcs7_destroy_cipher (obj);
-}
-
-
-/*
- * XXX I think all of the following lengths should be longs instead
- * of ints, but our current crypto interface uses ints, so I did too.
- */
-
-
-/*
- * What will be the output length of the next call to decrypt?
- * Result can be used to perform memory allocations.  Note that the amount
- * is exactly accurate only when not doing a block cipher or when final
- * is false, otherwise it is an upper bound on the amount because until
- * we see the data we do not know how many padding bytes there are
- * (always between 1 and bsize).
- *
- * Note that this can return zero, which does not mean that the decrypt
- * operation can be skipped!  (It simply means that there are not enough
- * bytes to make up an entire block; the bytes will be reserved until
- * there are enough to encrypt/decrypt at least one block.)  However,
- * if zero is returned it *does* mean that no output buffer need be
- * passed in to the subsequent decrypt operation, as no output bytes
- * will be stored.
- */
-unsigned int
-sec_PKCS7DecryptLength (sec_PKCS7CipherObject *obj, unsigned int input_len,
-			PRBool final)
-{
-    int blocks, block_size;
-
-    PORT_Assert (! obj->encrypt);
-
-    block_size = obj->block_size;
-
-    /*
-     * If this is not a block cipher, then we always have the same
-     * number of output bytes as we had input bytes.
-     */
-    if (block_size == 0)
-	return input_len;
-
-    /*
-     * On the final call, we will always use up all of the pending
-     * bytes plus all of the input bytes, *but*, there will be padding
-     * at the end and we cannot predict how many bytes of padding we
-     * will end up removing.  The amount given here is actually known
-     * to be at least 1 byte too long (because we know we will have
-     * at least 1 byte of padding), but seemed clearer/better to me.
-     */
-    if (final)
-	return obj->pending_count + input_len;
-
-    /*
-     * Okay, this amount is exactly what we will output on the
-     * next cipher operation.  We will always hang onto the last
-     * 1 - block_size bytes for non-final operations.  That is,
-     * we will do as many complete blocks as we can *except* the
-     * last block (complete or partial).  (This is because until
-     * we know we are at the end, we cannot know when to interpret
-     * and removing the padding byte(s), which are guaranteed to
-     * be there.)
-     */
-    blocks = (obj->pending_count + input_len - 1) / block_size;
-    return blocks * block_size;
-}
-
-/*
- * What will be the output length of the next call to encrypt?
- * Result can be used to perform memory allocations.
- *
- * Note that this can return zero, which does not mean that the encrypt
- * operation can be skipped!  (It simply means that there are not enough
- * bytes to make up an entire block; the bytes will be reserved until
- * there are enough to encrypt/decrypt at least one block.)  However,
- * if zero is returned it *does* mean that no output buffer need be
- * passed in to the subsequent encrypt operation, as no output bytes
- * will be stored.
- */
-unsigned int
-sec_PKCS7EncryptLength (sec_PKCS7CipherObject *obj, unsigned int input_len,
-			PRBool final)
-{
-    int blocks, block_size;
-    int pad_size;
-
-    PORT_Assert (obj->encrypt);
-
-    block_size = obj->block_size;
-    pad_size = obj->pad_size;
-
-    /*
-     * If this is not a block cipher, then we always have the same
-     * number of output bytes as we had input bytes.
-     */
-    if (block_size == 0)
-	return input_len;
-
-    /*
-     * On the final call, we only send out what we need for
-     * remaining bytes plus the padding.  (There is always padding,
-     * so even if we have an exact number of blocks as input, we
-     * will add another full block that is just padding.)
-     */
-    if (final) {
-	if (pad_size == 0) {
-    	    return obj->pending_count + input_len;
-	} else {
-    	    blocks = (obj->pending_count + input_len) / pad_size;
-	    blocks++;
-	    return blocks*pad_size;
-	}
-    }
-
-    /*
-     * Now, count the number of complete blocks of data we have.
-     */
-    blocks = (obj->pending_count + input_len) / block_size;
-
-
-    return blocks * block_size;
-}
-
-
-/*
- * Decrypt a given length of input buffer (starting at "input" and
- * containing "input_len" bytes), placing the decrypted bytes in
- * "output" and storing the output length in "*output_len_p".
- * "obj" is the return value from sec_PKCS7CreateDecryptObject.
- * When "final" is true, this is the last of the data to be decrypted.
- *
- * This is much more complicated than it sounds when the cipher is
- * a block-type, meaning that the decryption function will only
- * operate on whole blocks.  But our caller is operating stream-wise,
- * and can pass in any number of bytes.  So we need to keep track
- * of block boundaries.  We save excess bytes between calls in "obj".
- * We also need to determine which bytes are padding, and remove
- * them from the output.  We can only do this step when we know we
- * have the final block of data.  PKCS #7 specifies that the padding
- * used for a block cipher is a string of bytes, each of whose value is
- * the same as the length of the padding, and that all data is padded.
- * (Even data that starts out with an exact multiple of blocks gets
- * added to it another block, all of which is padding.)
- */ 
-SECStatus
-sec_PKCS7Decrypt (sec_PKCS7CipherObject *obj, unsigned char *output,
-		  unsigned int *output_len_p, unsigned int max_output_len,
-		  const unsigned char *input, unsigned int input_len,
-		  PRBool final)
-{
-    int blocks, bsize, pcount, padsize;
-    unsigned int max_needed, ifraglen, ofraglen, output_len;
-    unsigned char *pbuf;
-    SECStatus rv;
-
-    PORT_Assert (! obj->encrypt);
-
-    /*
-     * Check that we have enough room for the output.  Our caller should
-     * already handle this; failure is really an internal error (i.e. bug).
-     */
-    max_needed = sec_PKCS7DecryptLength (obj, input_len, final);
-    PORT_Assert (max_output_len >= max_needed);
-    if (max_output_len < max_needed) {
-	/* PORT_SetError (XXX); */
-	return SECFailure;
-    }
-
-    /*
-     * hardware encryption does not like small decryption sizes here, so we
-     * allow both blocking and padding.
-     */
-    bsize = obj->block_size;
-    padsize = obj->pad_size;
-
-    /*
-     * When no blocking or padding work to do, we can simply call the
-     * cipher function and we are done.
-     */
-    if (bsize == 0) {
-	return (* obj->doit) (obj->cx, output, output_len_p, max_output_len,
-			      input, input_len);
-    }
-
-    pcount = obj->pending_count;
-    pbuf = obj->pending_buf;
-
-    output_len = 0;
-
-    if (pcount) {
-	/*
-	 * Try to fill in an entire block, starting with the bytes
-	 * we already have saved away.
-	 */
-	while (input_len && pcount < bsize) {
-	    pbuf[pcount++] = *input++;
-	    input_len--;
-	}
-	/*
-	 * If we have at most a whole block and this is not our last call,
-	 * then we are done for now.  (We do not try to decrypt a lone
-	 * single block because we cannot interpret the padding bytes
-	 * until we know we are handling the very last block of all input.)
-	 */
-	if (input_len == 0 && !final) {
-	    obj->pending_count = pcount;
-	    if (output_len_p)
-		*output_len_p = 0;
-	    return SECSuccess;
-	}
-	/*
-	 * Given the logic above, we expect to have a full block by now.
-	 * If we do not, there is something wrong, either with our own
-	 * logic or with (length of) the data given to us.
-	 */
-	PORT_Assert ((padsize == 0) || (pcount % padsize) == 0);
-	if ((padsize != 0) && (pcount % padsize) != 0) {
-	    PORT_Assert (final);	
-	    PORT_SetError (SEC_ERROR_BAD_DATA);
-	    return SECFailure;
-	}
-	/*
-	 * Decrypt the block.
-	 */
-	rv = (* obj->doit) (obj->cx, output, &ofraglen, max_output_len,
-			    pbuf, pcount);
-	if (rv != SECSuccess)
-	    return rv;
-
-	/*
-	 * For now anyway, all of our ciphers have the same number of
-	 * bytes of output as they do input.  If this ever becomes untrue,
-	 * then sec_PKCS7DecryptLength needs to be made smarter!
-	 */
-	PORT_Assert (ofraglen == pcount);
-
-	/*
-	 * Account for the bytes now in output.
-	 */
-	max_output_len -= ofraglen;
-	output_len += ofraglen;
-	output += ofraglen;
-    }
-
-    /*
-     * If this is our last call, we expect to have an exact number of
-     * blocks left to be decrypted; we will decrypt them all.
-     * 
-     * If not our last call, we always save between 1 and bsize bytes
-     * until next time.  (We must do this because we cannot be sure
-     * that none of the decrypted bytes are padding bytes until we
-     * have at least another whole block of data.  You cannot tell by
-     * looking -- the data could be anything -- you can only tell by
-     * context, knowing you are looking at the last block.)  We could
-     * decrypt a whole block now but it is easier if we just treat it
-     * the same way we treat partial block bytes.
-     */
-    if (final) {
-	if (padsize) {
-	    blocks = input_len / padsize;
-	    ifraglen = blocks * padsize;
-	} else ifraglen = input_len;
-	PORT_Assert (ifraglen == input_len);
-
-	if (ifraglen != input_len) {
-	    PORT_SetError (SEC_ERROR_BAD_DATA);
-	    return SECFailure;
-	}
-    } else {
-	blocks = (input_len - 1) / bsize;
-	ifraglen = blocks * bsize;
-	PORT_Assert (ifraglen < input_len);
-
-	pcount = input_len - ifraglen;
-	PORT_Memcpy (pbuf, input + ifraglen, pcount);
-	obj->pending_count = pcount;
-    }
-
-    if (ifraglen) {
-	rv = (* obj->doit) (obj->cx, output, &ofraglen, max_output_len,
-			    input, ifraglen);
-	if (rv != SECSuccess)
-	    return rv;
-
-	/*
-	 * For now anyway, all of our ciphers have the same number of
-	 * bytes of output as they do input.  If this ever becomes untrue,
-	 * then sec_PKCS7DecryptLength needs to be made smarter!
-	 */
-	PORT_Assert (ifraglen == ofraglen);
-	if (ifraglen != ofraglen) {
-	    PORT_SetError (SEC_ERROR_BAD_DATA);
-	    return SECFailure;
-	}
-
-	output_len += ofraglen;
-    } else {
-	ofraglen = 0;
-    }
-
-    /*
-     * If we just did our very last block, "remove" the padding by
-     * adjusting the output length.
-     */
-    if (final && (padsize != 0)) {
-	unsigned int padlen = *(output + ofraglen - 1);
-	if (padlen == 0 || padlen > padsize) {
-	    PORT_SetError (SEC_ERROR_BAD_DATA);
-	    return SECFailure;
-	}
-	output_len -= padlen;
-    }
-
-    PORT_Assert (output_len_p != NULL || output_len == 0);
-    if (output_len_p != NULL)
-	*output_len_p = output_len;
-
-    return SECSuccess;
-}
-
-/*
- * Encrypt a given length of input buffer (starting at "input" and
- * containing "input_len" bytes), placing the encrypted bytes in
- * "output" and storing the output length in "*output_len_p".
- * "obj" is the return value from sec_PKCS7CreateEncryptObject.
- * When "final" is true, this is the last of the data to be encrypted.
- *
- * This is much more complicated than it sounds when the cipher is
- * a block-type, meaning that the encryption function will only
- * operate on whole blocks.  But our caller is operating stream-wise,
- * and can pass in any number of bytes.  So we need to keep track
- * of block boundaries.  We save excess bytes between calls in "obj".
- * We also need to add padding bytes at the end.  PKCS #7 specifies
- * that the padding used for a block cipher is a string of bytes,
- * each of whose value is the same as the length of the padding,
- * and that all data is padded.  (Even data that starts out with
- * an exact multiple of blocks gets added to it another block,
- * all of which is padding.)
- *
- * XXX I would kind of like to combine this with the function above
- * which does decryption, since they have a lot in common.  But the
- * tricky parts about padding and filling blocks would be much
- * harder to read that way, so I left them separate.  At least for
- * now until it is clear that they are right.
- */ 
-SECStatus
-sec_PKCS7Encrypt (sec_PKCS7CipherObject *obj, unsigned char *output,
-		  unsigned int *output_len_p, unsigned int max_output_len,
-		  const unsigned char *input, unsigned int input_len,
-		  PRBool final)
-{
-    int blocks, bsize, padlen, pcount, padsize;
-    unsigned int max_needed, ifraglen, ofraglen, output_len;
-    unsigned char *pbuf;
-    SECStatus rv;
-
-    PORT_Assert (obj->encrypt);
-
-    /*
-     * Check that we have enough room for the output.  Our caller should
-     * already handle this; failure is really an internal error (i.e. bug).
-     */
-    max_needed = sec_PKCS7EncryptLength (obj, input_len, final);
-    PORT_Assert (max_output_len >= max_needed);
-    if (max_output_len < max_needed) {
-	/* PORT_SetError (XXX); */
-	return SECFailure;
-    }
-
-    bsize = obj->block_size;
-    padsize = obj->pad_size;
-
-    /*
-     * When no blocking and padding work to do, we can simply call the
-     * cipher function and we are done.
-     */
-    if (bsize == 0) {
-	return (* obj->doit) (obj->cx, output, output_len_p, max_output_len,
-			      input, input_len);
-    }
-
-    pcount = obj->pending_count;
-    pbuf = obj->pending_buf;
-
-    output_len = 0;
-
-    if (pcount) {
-	/*
-	 * Try to fill in an entire block, starting with the bytes
-	 * we already have saved away.
-	 */
-	while (input_len && pcount < bsize) {
-	    pbuf[pcount++] = *input++;
-	    input_len--;
-	}
-	/*
-	 * If we do not have a full block and we know we will be
-	 * called again, then we are done for now.
-	 */
-	if (pcount < bsize && !final) {
-	    obj->pending_count = pcount;
-	    if (output_len_p != NULL)
-		*output_len_p = 0;
-	    return SECSuccess;
-	}
-	/*
-	 * If we have a whole block available, encrypt it.
-	 */
-	if ((padsize == 0) || (pcount % padsize) == 0) {
-	    rv = (* obj->doit) (obj->cx, output, &ofraglen, max_output_len,
-				pbuf, pcount);
-	    if (rv != SECSuccess)
-		return rv;
-
-	    /*
-	     * For now anyway, all of our ciphers have the same number of
-	     * bytes of output as they do input.  If this ever becomes untrue,
-	     * then sec_PKCS7EncryptLength needs to be made smarter!
-	     */
-	    PORT_Assert (ofraglen == pcount);
-
-	    /*
-	     * Account for the bytes now in output.
-	     */
-	    max_output_len -= ofraglen;
-	    output_len += ofraglen;
-	    output += ofraglen;
-
-	    pcount = 0;
-	}
-    }
-
-    if (input_len) {
-	PORT_Assert (pcount == 0);
-
-	blocks = input_len / bsize;
-	ifraglen = blocks * bsize;
-
-	if (ifraglen) {
-	    rv = (* obj->doit) (obj->cx, output, &ofraglen, max_output_len,
-				input, ifraglen);
-	    if (rv != SECSuccess)
-		return rv;
-
-	    /*
-	     * For now anyway, all of our ciphers have the same number of
-	     * bytes of output as they do input.  If this ever becomes untrue,
-	     * then sec_PKCS7EncryptLength needs to be made smarter!
-	     */
-	    PORT_Assert (ifraglen == ofraglen);
-
-	    max_output_len -= ofraglen;
-	    output_len += ofraglen;
-	    output += ofraglen;
-	}
-
-	pcount = input_len - ifraglen;
-	PORT_Assert (pcount < bsize);
-	if (pcount)
-	    PORT_Memcpy (pbuf, input + ifraglen, pcount);
-    }
-
-    if (final) {
-	padlen = padsize - (pcount % padsize);
-	PORT_Memset (pbuf + pcount, padlen, padlen);
-	rv = (* obj->doit) (obj->cx, output, &ofraglen, max_output_len,
-			    pbuf, pcount+padlen);
-	if (rv != SECSuccess)
-	    return rv;
-
-	/*
-	 * For now anyway, all of our ciphers have the same number of
-	 * bytes of output as they do input.  If this ever becomes untrue,
-	 * then sec_PKCS7EncryptLength needs to be made smarter!
-	 */
-	PORT_Assert (ofraglen == (pcount+padlen));
-	output_len += ofraglen;
-    } else {
-	obj->pending_count = pcount;
-    }
-
-    PORT_Assert (output_len_p != NULL || output_len == 0);
-    if (output_len_p != NULL)
-	*output_len_p = output_len;
-
-    return SECSuccess;
-}
-
-/*
- * End of cipher stuff.
- * -------------------------------------------------------------------
- */
-
-
-/*
- * -------------------------------------------------------------------
- * XXX The following Attribute stuff really belongs elsewhere.
- * The Attribute type is *not* part of pkcs7 but rather X.501.
- * But for now, since PKCS7 is the only customer of attributes,
- * we define them here.  Once there is a use outside of PKCS7,
- * then change the attribute types and functions from internal
- * to external naming convention, and move them elsewhere!
- */
-
-/*
- * Look through a set of attributes and find one that matches the
- * specified object ID.  If "only" is true, then make sure that
- * there is not more than one attribute of the same type.  Otherwise,
- * just return the first one found. (XXX Does anybody really want
- * that first-found behavior?  It was like that when I found it...)
- */
-SEC_PKCS7Attribute *
-sec_PKCS7FindAttribute (SEC_PKCS7Attribute **attrs, SECOidTag oidtag,
-			PRBool only)
-{
-    SECOidData *oid;
-    SEC_PKCS7Attribute *attr1, *attr2;
-
-    if (attrs == NULL)
-	return NULL;
-
-    oid = SECOID_FindOIDByTag(oidtag);
-    if (oid == NULL)
-	return NULL;
-
-    while ((attr1 = *attrs++) != NULL) {
-	if (attr1->type.len == oid->oid.len && PORT_Memcmp (attr1->type.data,
-							    oid->oid.data,
-							    oid->oid.len) == 0)
-	    break;
-    }
-
-    if (attr1 == NULL)
-	return NULL;
-
-    if (!only)
-	return attr1;
-
-    while ((attr2 = *attrs++) != NULL) {
-	if (attr2->type.len == oid->oid.len && PORT_Memcmp (attr2->type.data,
-							    oid->oid.data,
-							    oid->oid.len) == 0)
-	    break;
-    }
-
-    if (attr2 != NULL)
-	return NULL;
-
-    return attr1;
-}
-
-
-/*
- * Return the single attribute value, doing some sanity checking first:
- * - Multiple values are *not* expected.
- * - Empty values are *not* expected.
- */
-SECItem *
-sec_PKCS7AttributeValue(SEC_PKCS7Attribute *attr)
-{
-    SECItem *value;
-
-    if (attr == NULL)
-	return NULL;
-
-    value = attr->values[0];
-
-    if (value == NULL || value->data == NULL || value->len == 0)
-	return NULL;
-
-    if (attr->values[1] != NULL)
-	return NULL;
-
-    return value;
-}
-
-static const SEC_ASN1Template *
-sec_attr_choose_attr_value_template(void *src_or_dest, PRBool encoding)
-{
-    const SEC_ASN1Template *theTemplate;
-
-    SEC_PKCS7Attribute *attribute;
-    SECOidData *oiddata;
-    PRBool encoded;
-
-    PORT_Assert (src_or_dest != NULL);
-    if (src_or_dest == NULL)
-	return NULL;
-
-    attribute = (SEC_PKCS7Attribute*)src_or_dest;
-
-    if (encoding && attribute->encoded)
-	return SEC_ASN1_GET(SEC_AnyTemplate);
-
-    oiddata = attribute->typeTag;
-    if (oiddata == NULL) {
-	oiddata = SECOID_FindOID(&attribute->type);
-	attribute->typeTag = oiddata;
-    }
-
-    if (oiddata == NULL) {
-	encoded = PR_TRUE;
-	theTemplate = SEC_ASN1_GET(SEC_AnyTemplate);
-    } else {
-	switch (oiddata->offset) {
-	  default:
-	    encoded = PR_TRUE;
-	    theTemplate = SEC_ASN1_GET(SEC_AnyTemplate);
-	    break;
-	  case SEC_OID_PKCS9_EMAIL_ADDRESS:
-	  case SEC_OID_RFC1274_MAIL:
-	  case SEC_OID_PKCS9_UNSTRUCTURED_NAME:
-	    encoded = PR_FALSE;
-	    theTemplate = SEC_ASN1_GET(SEC_IA5StringTemplate);
-	    break;
-	  case SEC_OID_PKCS9_CONTENT_TYPE:
-	    encoded = PR_FALSE;
-	    theTemplate = SEC_ASN1_GET(SEC_ObjectIDTemplate);
-	    break;
-	  case SEC_OID_PKCS9_MESSAGE_DIGEST:
-	    encoded = PR_FALSE;
-	    theTemplate = SEC_ASN1_GET(SEC_OctetStringTemplate);
-	    break;
-	  case SEC_OID_PKCS9_SIGNING_TIME:
-	    encoded = PR_FALSE;
-            theTemplate = SEC_ASN1_GET(CERT_TimeChoiceTemplate);
-	    break;
-	  /* XXX Want other types here, too */
-	}
-    }
-
-    if (encoding) {
-	/*
-	 * If we are encoding and we think we have an already-encoded value,
-	 * then the code which initialized this attribute should have set
-	 * the "encoded" property to true (and we would have returned early,
-	 * up above).  No devastating error, but that code should be fixed.
-	 * (It could indicate that the resulting encoded bytes are wrong.)
-	 */
-	PORT_Assert (!encoded);
-    } else {
-	/*
-	 * We are decoding; record whether the resulting value is
-	 * still encoded or not.
-	 */
-	attribute->encoded = encoded;
-    }
-    return theTemplate;
-}
-
-static const SEC_ASN1TemplateChooserPtr sec_attr_chooser
-	= sec_attr_choose_attr_value_template;
-
-static const SEC_ASN1Template sec_pkcs7_attribute_template[] = {
-    { SEC_ASN1_SEQUENCE,
-	  0, NULL, sizeof(SEC_PKCS7Attribute) },
-    { SEC_ASN1_OBJECT_ID,
-	  offsetof(SEC_PKCS7Attribute,type) },
-    { SEC_ASN1_DYNAMIC | SEC_ASN1_SET_OF,
-	  offsetof(SEC_PKCS7Attribute,values),
-	  &sec_attr_chooser },
-    { 0 }
-};
-
-static const SEC_ASN1Template sec_pkcs7_set_of_attribute_template[] = {
-    { SEC_ASN1_SET_OF, 0, sec_pkcs7_attribute_template },
-};
-
-/*
- * If you are wondering why this routine does not reorder the attributes
- * first, and might be tempted to make it do so, see the comment by the
- * call to ReorderAttributes in p7encode.c.  (Or, see who else calls this
- * and think long and hard about the implications of making it always
- * do the reordering.)
- */
-SECItem *
-sec_PKCS7EncodeAttributes (PRArenaPool *poolp, SECItem *dest, void *src)
-{
-    return SEC_ASN1EncodeItem (poolp, dest, src,
-			       sec_pkcs7_set_of_attribute_template);
-}
-
-/*
- * Make sure that the order of the attributes guarantees valid DER
- * (which must be in lexigraphically ascending order for a SET OF);
- * if reordering is necessary it will be done in place (in attrs).
- */
-SECStatus
-sec_PKCS7ReorderAttributes (SEC_PKCS7Attribute **attrs)
-{
-    PRArenaPool *poolp;
-    int num_attrs, i, pass, besti;
-    unsigned int j;
-    SECItem **enc_attrs;
-    SEC_PKCS7Attribute **new_attrs;
-
-    /*
-     * I think we should not be called with NULL.  But if we are,
-     * call it a success anyway, because the order *is* okay.
-     */
-    PORT_Assert (attrs != NULL);
-    if (attrs == NULL)
-	return SECSuccess;
-
-    /*
-     * Count how many attributes we are dealing with here.
-     */
-    num_attrs = 0;
-    while (attrs[num_attrs] != NULL)
-	num_attrs++;
-
-    /*
-     * Again, I think we should have some attributes here.
-     * But if we do not, or if there is only one, then call it
-     * a success because it also already has a fine order.
-     */
-    PORT_Assert (num_attrs);
-    if (num_attrs == 0 || num_attrs == 1)
-	return SECSuccess;
-
-    /*
-     * Allocate an arena for us to work with, so it is easy to
-     * clean up all of the memory (fairly small pieces, really).
-     */
-    poolp = PORT_NewArena (1024);	/* XXX what is right value? */
-    if (poolp == NULL)
-	return SECFailure;		/* no memory; nothing we can do... */
-
-    /*
-     * Allocate arrays to hold the individual encodings which we will use
-     * for comparisons and the reordered attributes as they are sorted.
-     */
-    enc_attrs=(SECItem**)PORT_ArenaZAlloc(poolp, num_attrs*sizeof(SECItem *));
-    new_attrs = (SEC_PKCS7Attribute**)PORT_ArenaZAlloc (poolp,
-				  num_attrs * sizeof(SEC_PKCS7Attribute *));
-    if (enc_attrs == NULL || new_attrs == NULL) {
-	PORT_FreeArena (poolp, PR_FALSE);
-	return SECFailure;
-    }
-
-    /*
-     * DER encode each individual attribute.
-     */
-    for (i = 0; i < num_attrs; i++) {
-	enc_attrs[i] = SEC_ASN1EncodeItem (poolp, NULL, attrs[i],
-					   sec_pkcs7_attribute_template);
-	if (enc_attrs[i] == NULL) {
-	    PORT_FreeArena (poolp, PR_FALSE);
-	    return SECFailure;
-	}
-    }
-
-    /*
-     * Now compare and sort them; this is not the most efficient sorting
-     * method, but it is just fine for the problem at hand, because the
-     * number of attributes is (always) going to be small.
-     */
-    for (pass = 0; pass < num_attrs; pass++) {
-	/*
-	 * Find the first not-yet-accepted attribute.  (Once one is
-	 * sorted into the other array, it is cleared from enc_attrs.)
-	 */
-	for (i = 0; i < num_attrs; i++) {
-	    if (enc_attrs[i] != NULL)
-		break;
-	}
-	PORT_Assert (i < num_attrs);
-	besti = i;
-
-	/*
-	 * Find the lowest (lexigraphically) encoding.  One that is
-	 * shorter than all the rest is known to be "less" because each
-	 * attribute is of the same type (a SEQUENCE) and so thus the
-	 * first octet of each is the same, and the second octet is
-	 * the length (or the length of the length with the high bit
-	 * set, followed by the length, which also works out to always
-	 * order the shorter first).  Two (or more) that have the
-	 * same length need to be compared byte by byte until a mismatch
-	 * is found.
-	 */
-	for (i = besti + 1; i < num_attrs; i++) {
-	    if (enc_attrs[i] == NULL)	/* slot already handled */
-		continue;
-
-	    if (enc_attrs[i]->len != enc_attrs[besti]->len) {
-		if (enc_attrs[i]->len < enc_attrs[besti]->len)
-		    besti = i;
-		continue;
-	    }
-
-	    for (j = 0; j < enc_attrs[i]->len; j++) {
-		if (enc_attrs[i]->data[j] < enc_attrs[besti]->data[j]) {
-		    besti = i;
-		    break;
-		}
-	    }
-
-	    /*
-	     * For this not to be true, we would have to have encountered	
-	     * two *identical* attributes, which I think we should not see.
-	     * So assert if it happens, but even if it does, let it go
-	     * through; the ordering of the two does not matter.
-	     */
-	    PORT_Assert (j < enc_attrs[i]->len);
-	}
-
-	/*
-	 * Now we have found the next-lowest one; copy it over and
-	 * remove it from enc_attrs.
-	 */
-	new_attrs[pass] = attrs[besti];
-	enc_attrs[besti] = NULL;
-    }
-
-    /*
-     * Now new_attrs has the attributes in the order we want;
-     * copy them back into the attrs array we started with.
-     */
-    for (i = 0; i < num_attrs; i++)
-	attrs[i] = new_attrs[i];
-
-    PORT_FreeArena (poolp, PR_FALSE);
-    return SECSuccess;
-}
-
-/*
- * End of attribute stuff.
- * -------------------------------------------------------------------
- */
-
-
-/*
- * Templates and stuff.  Keep these at the end of the file.
- */
-
-/* forward declaration */
-static const SEC_ASN1Template *
-sec_pkcs7_choose_content_template(void *src_or_dest, PRBool encoding);
-
-static const SEC_ASN1TemplateChooserPtr sec_pkcs7_chooser
-	= sec_pkcs7_choose_content_template;
-
-const SEC_ASN1Template sec_PKCS7ContentInfoTemplate[] = {
-    { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM,
-	  0, NULL, sizeof(SEC_PKCS7ContentInfo) },
-    { SEC_ASN1_OBJECT_ID,
-	  offsetof(SEC_PKCS7ContentInfo,contentType) },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_DYNAMIC | SEC_ASN1_MAY_STREAM
-     | SEC_ASN1_EXPLICIT | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 0,
-	  offsetof(SEC_PKCS7ContentInfo,content),
-	  &sec_pkcs7_chooser },
-    { 0 }
-};
-
-/* XXX These names should change from external to internal convention. */
-
-static const SEC_ASN1Template SEC_PKCS7SignerInfoTemplate[] = {
-    { SEC_ASN1_SEQUENCE,
-	  0, NULL, sizeof(SEC_PKCS7SignerInfo) },
-    { SEC_ASN1_INTEGER,
-	  offsetof(SEC_PKCS7SignerInfo,version) },
-    { SEC_ASN1_POINTER | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7SignerInfo,issuerAndSN),
-	  SEC_ASN1_SUB(CERT_IssuerAndSNTemplate) },
-    { SEC_ASN1_INLINE | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7SignerInfo,digestAlg),
-	  SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 0,
-	  offsetof(SEC_PKCS7SignerInfo,authAttr),
-	  sec_pkcs7_set_of_attribute_template },
-    { SEC_ASN1_INLINE | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7SignerInfo,digestEncAlg),
-	  SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
-    { SEC_ASN1_OCTET_STRING,
-	  offsetof(SEC_PKCS7SignerInfo,encDigest) },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC | 1,
-	  offsetof(SEC_PKCS7SignerInfo,unAuthAttr),
-	  sec_pkcs7_set_of_attribute_template },
-    { 0 }
-};
-
-static const SEC_ASN1Template SEC_PKCS7SignedDataTemplate[] = {
-    { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM,
-	  0, NULL, sizeof(SEC_PKCS7SignedData) },
-    { SEC_ASN1_INTEGER,
-	  offsetof(SEC_PKCS7SignedData,version) },
-    { SEC_ASN1_SET_OF | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7SignedData,digestAlgorithms),
-	  SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
-    { SEC_ASN1_INLINE,
-	  offsetof(SEC_PKCS7SignedData,contentInfo),
-	  sec_PKCS7ContentInfoTemplate },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC  |
-      SEC_ASN1_XTRN | 0,
-	  offsetof(SEC_PKCS7SignedData,rawCerts),
-	  SEC_ASN1_SUB(SEC_SetOfAnyTemplate) },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC  |
-      SEC_ASN1_XTRN | 1,
-	  offsetof(SEC_PKCS7SignedData,crls),
-	  SEC_ASN1_SUB(CERT_SetOfSignedCrlTemplate) },
-    { SEC_ASN1_SET_OF,
-	  offsetof(SEC_PKCS7SignedData,signerInfos),
-	  SEC_PKCS7SignerInfoTemplate },
-    { 0 }
-};
-
-static const SEC_ASN1Template SEC_PointerToPKCS7SignedDataTemplate[] = {
-    { SEC_ASN1_POINTER, 0, SEC_PKCS7SignedDataTemplate }
-};
-
-static const SEC_ASN1Template SEC_PKCS7RecipientInfoTemplate[] = {
-    { SEC_ASN1_SEQUENCE,
-	  0, NULL, sizeof(SEC_PKCS7RecipientInfo) },
-    { SEC_ASN1_INTEGER,
-	  offsetof(SEC_PKCS7RecipientInfo,version) },
-    { SEC_ASN1_POINTER | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7RecipientInfo,issuerAndSN),
-	  SEC_ASN1_SUB(CERT_IssuerAndSNTemplate) },
-    { SEC_ASN1_INLINE | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7RecipientInfo,keyEncAlg),
-	  SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
-    { SEC_ASN1_OCTET_STRING,
-	  offsetof(SEC_PKCS7RecipientInfo,encKey) },
-    { 0 }
-};
-
-static const SEC_ASN1Template SEC_PKCS7EncryptedContentInfoTemplate[] = {
-    { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM,
-	  0, NULL, sizeof(SEC_PKCS7EncryptedContentInfo) },
-    { SEC_ASN1_OBJECT_ID,
-	  offsetof(SEC_PKCS7EncryptedContentInfo,contentType) },
-    { SEC_ASN1_INLINE | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7EncryptedContentInfo,contentEncAlg),
-	  SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_MAY_STREAM | SEC_ASN1_CONTEXT_SPECIFIC |
-      SEC_ASN1_XTRN | 0,
-	  offsetof(SEC_PKCS7EncryptedContentInfo,encContent),
-	  SEC_ASN1_SUB(SEC_OctetStringTemplate) },
-    { 0 }
-};
-
-static const SEC_ASN1Template SEC_PKCS7EnvelopedDataTemplate[] = {
-    { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM,
-	  0, NULL, sizeof(SEC_PKCS7EnvelopedData) },
-    { SEC_ASN1_INTEGER,
-	  offsetof(SEC_PKCS7EnvelopedData,version) },
-    { SEC_ASN1_SET_OF,
-	  offsetof(SEC_PKCS7EnvelopedData,recipientInfos),
-	  SEC_PKCS7RecipientInfoTemplate },
-    { SEC_ASN1_INLINE,
-	  offsetof(SEC_PKCS7EnvelopedData,encContentInfo),
-	  SEC_PKCS7EncryptedContentInfoTemplate },
-    { 0 }
-};
-
-static const SEC_ASN1Template SEC_PointerToPKCS7EnvelopedDataTemplate[] = {
-    { SEC_ASN1_POINTER, 0, SEC_PKCS7EnvelopedDataTemplate }
-};
-
-static const SEC_ASN1Template SEC_PKCS7SignedAndEnvelopedDataTemplate[] = {
-    { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM,
-	  0, NULL, sizeof(SEC_PKCS7SignedAndEnvelopedData) },
-    { SEC_ASN1_INTEGER,
-	  offsetof(SEC_PKCS7SignedAndEnvelopedData,version) },
-    { SEC_ASN1_SET_OF,
-	  offsetof(SEC_PKCS7SignedAndEnvelopedData,recipientInfos),
-	  SEC_PKCS7RecipientInfoTemplate },
-    { SEC_ASN1_SET_OF | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7SignedAndEnvelopedData,digestAlgorithms),
-	  SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
-    { SEC_ASN1_INLINE,
-	  offsetof(SEC_PKCS7SignedAndEnvelopedData,encContentInfo),
-	  SEC_PKCS7EncryptedContentInfoTemplate },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC |
-      SEC_ASN1_XTRN | 0,
-	  offsetof(SEC_PKCS7SignedAndEnvelopedData,rawCerts),
-	  SEC_ASN1_SUB(SEC_SetOfAnyTemplate) },
-    { SEC_ASN1_OPTIONAL | SEC_ASN1_CONSTRUCTED | SEC_ASN1_CONTEXT_SPECIFIC |
-      SEC_ASN1_XTRN | 1,
-	  offsetof(SEC_PKCS7SignedAndEnvelopedData,crls),
-	  SEC_ASN1_SUB(CERT_SetOfSignedCrlTemplate) },
-    { SEC_ASN1_SET_OF,
-	  offsetof(SEC_PKCS7SignedAndEnvelopedData,signerInfos),
-	  SEC_PKCS7SignerInfoTemplate },
-    { 0 }
-};
-
-static const SEC_ASN1Template
-SEC_PointerToPKCS7SignedAndEnvelopedDataTemplate[] = {
-    { SEC_ASN1_POINTER, 0, SEC_PKCS7SignedAndEnvelopedDataTemplate }
-};
-
-static const SEC_ASN1Template SEC_PKCS7DigestedDataTemplate[] = {
-    { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM,
-	  0, NULL, sizeof(SEC_PKCS7DigestedData) },
-    { SEC_ASN1_INTEGER,
-	  offsetof(SEC_PKCS7DigestedData,version) },
-    { SEC_ASN1_INLINE | SEC_ASN1_XTRN,
-	  offsetof(SEC_PKCS7DigestedData,digestAlg),
-	  SEC_ASN1_SUB(SECOID_AlgorithmIDTemplate) },
-    { SEC_ASN1_INLINE,
-	  offsetof(SEC_PKCS7DigestedData,contentInfo),
-	  sec_PKCS7ContentInfoTemplate },
-    { SEC_ASN1_OCTET_STRING,
-	  offsetof(SEC_PKCS7DigestedData,digest) },
-    { 0 }
-};
-
-static const SEC_ASN1Template SEC_PointerToPKCS7DigestedDataTemplate[] = {
-    { SEC_ASN1_POINTER, 0, SEC_PKCS7DigestedDataTemplate }
-};
-
-static const SEC_ASN1Template SEC_PKCS7EncryptedDataTemplate[] = {
-    { SEC_ASN1_SEQUENCE | SEC_ASN1_MAY_STREAM,
-	  0, NULL, sizeof(SEC_PKCS7EncryptedData) },
-    { SEC_ASN1_INTEGER,
-	  offsetof(SEC_PKCS7EncryptedData,version) },
-    { SEC_ASN1_INLINE,
-	  offsetof(SEC_PKCS7EncryptedData,encContentInfo),
-	  SEC_PKCS7EncryptedContentInfoTemplate },
-    { 0 }
-};
-
-static const SEC_ASN1Template SEC_PointerToPKCS7EncryptedDataTemplate[] = {
-    { SEC_ASN1_POINTER, 0, SEC_PKCS7EncryptedDataTemplate }
-};
-
-static const SEC_ASN1Template *
-sec_pkcs7_choose_content_template(void *src_or_dest, PRBool encoding)
-{
-    const SEC_ASN1Template *theTemplate;
-    SEC_PKCS7ContentInfo *cinfo;
-    SECOidTag kind;
-
-    PORT_Assert (src_or_dest != NULL);
-    if (src_or_dest == NULL)
-	return NULL;
-
-    cinfo = (SEC_PKCS7ContentInfo*)src_or_dest;
-    kind = SEC_PKCS7ContentType (cinfo);
-    switch (kind) {
-      default:
-	theTemplate = SEC_ASN1_GET(SEC_PointerToAnyTemplate);
-	break;
-      case SEC_OID_PKCS7_DATA:
-	theTemplate = SEC_ASN1_GET(SEC_PointerToOctetStringTemplate);
-	break;
-      case SEC_OID_PKCS7_SIGNED_DATA:
-	theTemplate = SEC_PointerToPKCS7SignedDataTemplate;
-	break;
-      case SEC_OID_PKCS7_ENVELOPED_DATA:
-	theTemplate = SEC_PointerToPKCS7EnvelopedDataTemplate;
-	break;
-      case SEC_OID_PKCS7_SIGNED_ENVELOPED_DATA:
-	theTemplate = SEC_PointerToPKCS7SignedAndEnvelopedDataTemplate;
-	break;
-      case SEC_OID_PKCS7_DIGESTED_DATA:
-	theTemplate = SEC_PointerToPKCS7DigestedDataTemplate;
-	break;
-      case SEC_OID_PKCS7_ENCRYPTED_DATA:
-	theTemplate = SEC_PointerToPKCS7EncryptedDataTemplate;
-	break;
-    }
-    return theTemplate;
-}
-
-/*
- * End of templates.  Do not add stuff after this; put new code
- * up above the start of the template definitions.
- */