Change the NSS and NSPR source tree to the new directory structure to be

mozilla/security/nss/lib/freebl/mpi/mpi-priv.h

Index: mozilla/security/nss/lib/freebl/mpi/mpi-priv.h
===================================================================
--- mozilla/security/nss/lib/freebl/mpi/mpi-priv.h	(revision 191424)
+++ mozilla/security/nss/lib/freebl/mpi/mpi-priv.h	(working copy)
@@ -1,285 +0,0 @@
-/*
- *  mpi-priv.h	- Private header file for MPI 
- *  Arbitrary precision integer arithmetic library
- *
- *  NOTE WELL: the content of this header file is NOT part of the "public"
- *  API for the MPI library, and may change at any time.  
- *  Application programs that use libmpi should NOT include this header file.
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
-/* $Id: mpi-priv.h,v 1.25 2012/04/25 14:49:50 gerv%gerv.net Exp $ */
-#ifndef _MPI_PRIV_H_
-#define _MPI_PRIV_H_ 1
-
-#include "mpi.h"
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-
-#if MP_DEBUG
-#include <stdio.h>
-
-#define DIAG(T,V) {fprintf(stderr,T);mp_print(V,stderr);fputc('\n',stderr);}
-#else
-#define DIAG(T,V)
-#endif
-
-/* If we aren't using a wired-in logarithm table, we need to include
-   the math library to get the log() function
- */
-
-/* {{{ s_logv_2[] - log table for 2 in various bases */
-
-#if MP_LOGTAB
-/*
-  A table of the logs of 2 for various bases (the 0 and 1 entries of
-  this table are meaningless and should not be referenced).  
-
-  This table is used to compute output lengths for the mp_toradix()
-  function.  Since a number n in radix r takes up about log_r(n)
-  digits, we estimate the output size by taking the least integer
-  greater than log_r(n), where:
-
-  log_r(n) = log_2(n) * log_r(2)
-
-  This table, therefore, is a table of log_r(2) for 2 <= r <= 36,
-  which are the output bases supported.  
- */
-
-extern const float s_logv_2[];
-#define LOG_V_2(R)  s_logv_2[(R)]
-
-#else
-
-/* 
-   If MP_LOGTAB is not defined, use the math library to compute the
-   logarithms on the fly.  Otherwise, use the table.
-   Pick which works best for your system.
- */
-
-#include <math.h>
-#define LOG_V_2(R)  (log(2.0)/log(R))
-
-#endif /* if MP_LOGTAB */
-
-/* }}} */
-
-/* {{{ Digit arithmetic macros */
-
-/*
-  When adding and multiplying digits, the results can be larger than
-  can be contained in an mp_digit.  Thus, an mp_word is used.  These
-  macros mask off the upper and lower digits of the mp_word (the
-  mp_word may be more than 2 mp_digits wide, but we only concern
-  ourselves with the low-order 2 mp_digits)
- */
-
-#define  CARRYOUT(W)  (mp_digit)((W)>>DIGIT_BIT)
-#define  ACCUM(W)     (mp_digit)(W)
-
-#define MP_MIN(a,b)   (((a) < (b)) ? (a) : (b))
-#define MP_MAX(a,b)   (((a) > (b)) ? (a) : (b))
-#define MP_HOWMANY(a,b) (((a) + (b) - 1)/(b))
-#define MP_ROUNDUP(a,b) (MP_HOWMANY(a,b) * (b))
-
-/* }}} */
-
-/* {{{ Comparison constants */
-
-#define  MP_LT       -1
-#define  MP_EQ        0
-#define  MP_GT        1
-
-/* }}} */
-
-/* {{{ private function declarations */
-
-/* 
-   If MP_MACRO is false, these will be defined as actual functions;
-   otherwise, suitable macro definitions will be used.  This works
-   around the fact that ANSI C89 doesn't support an 'inline' keyword
-   (although I hear C9x will ... about bloody time).  At present, the
-   macro definitions are identical to the function bodies, but they'll
-   expand in place, instead of generating a function call.
-
-   I chose these particular functions to be made into macros because
-   some profiling showed they are called a lot on a typical workload,
-   and yet they are primarily housekeeping.
- */
-#if MP_MACRO == 0
- void     s_mp_setz(mp_digit *dp, mp_size count); /* zero digits           */
- void     s_mp_copy(const mp_digit *sp, mp_digit *dp, mp_size count); /* copy */
- void    *s_mp_alloc(size_t nb, size_t ni);       /* general allocator     */
- void     s_mp_free(void *ptr);                   /* general free function */
-extern unsigned long mp_allocs;
-extern unsigned long mp_frees;
-extern unsigned long mp_copies;
-#else
-
- /* Even if these are defined as macros, we need to respect the settings
-    of the MP_MEMSET and MP_MEMCPY configuration options...
-  */
- #if MP_MEMSET == 0
-  #define  s_mp_setz(dp, count) \
-       {int ix;for(ix=0;ix<(count);ix++)(dp)[ix]=0;}
- #else
-  #define  s_mp_setz(dp, count) memset(dp, 0, (count) * sizeof(mp_digit))
- #endif /* MP_MEMSET */
-
- #if MP_MEMCPY == 0
-  #define  s_mp_copy(sp, dp, count) \
-       {int ix;for(ix=0;ix<(count);ix++)(dp)[ix]=(sp)[ix];}
- #else
-  #define  s_mp_copy(sp, dp, count) memcpy(dp, sp, (count) * sizeof(mp_digit))
- #endif /* MP_MEMCPY */
-
- #define  s_mp_alloc(nb, ni)  calloc(nb, ni)
- #define  s_mp_free(ptr) {if(ptr) free(ptr);}
-#endif /* MP_MACRO */
-
-mp_err   s_mp_grow(mp_int *mp, mp_size min);   /* increase allocated size */
-mp_err   s_mp_pad(mp_int *mp, mp_size min);    /* left pad with zeroes    */
-
-#if MP_MACRO == 0
- void     s_mp_clamp(mp_int *mp);               /* clip leading zeroes     */
-#else
- #define  s_mp_clamp(mp)\
-  { mp_size used = MP_USED(mp); \
-    while (used > 1 && DIGIT(mp, used - 1) == 0) --used; \
-    MP_USED(mp) = used; \
-  } 
-#endif /* MP_MACRO */
-
-void     s_mp_exch(mp_int *a, mp_int *b);      /* swap a and b in place   */
-
-mp_err   s_mp_lshd(mp_int *mp, mp_size p);     /* left-shift by p digits  */
-void     s_mp_rshd(mp_int *mp, mp_size p);     /* right-shift by p digits */
-mp_err   s_mp_mul_2d(mp_int *mp, mp_digit d);  /* multiply by 2^d in place */
-void     s_mp_div_2d(mp_int *mp, mp_digit d);  /* divide by 2^d in place  */
-void     s_mp_mod_2d(mp_int *mp, mp_digit d);  /* modulo 2^d in place     */
-void     s_mp_div_2(mp_int *mp);               /* divide by 2 in place    */
-mp_err   s_mp_mul_2(mp_int *mp);               /* multiply by 2 in place  */
-mp_err   s_mp_norm(mp_int *a, mp_int *b, mp_digit *pd); 
-                                               /* normalize for division  */
-mp_err   s_mp_add_d(mp_int *mp, mp_digit d);   /* unsigned digit addition */
-mp_err   s_mp_sub_d(mp_int *mp, mp_digit d);   /* unsigned digit subtract */
-mp_err   s_mp_mul_d(mp_int *mp, mp_digit d);   /* unsigned digit multiply */
-mp_err   s_mp_div_d(mp_int *mp, mp_digit d, mp_digit *r);
-		                               /* unsigned digit divide   */
-mp_err   s_mp_reduce(mp_int *x, const mp_int *m, const mp_int *mu);
-                                               /* Barrett reduction       */
-mp_err   s_mp_add(mp_int *a, const mp_int *b); /* magnitude addition      */
-mp_err   s_mp_add_3arg(const mp_int *a, const mp_int *b, mp_int *c);
-mp_err   s_mp_sub(mp_int *a, const mp_int *b); /* magnitude subtract      */
-mp_err   s_mp_sub_3arg(const mp_int *a, const mp_int *b, mp_int *c);
-mp_err   s_mp_add_offset(mp_int *a, mp_int *b, mp_size offset);
-                                               /* a += b * RADIX^offset   */
-mp_err   s_mp_mul(mp_int *a, const mp_int *b); /* magnitude multiply      */
-#if MP_SQUARE
-mp_err   s_mp_sqr(mp_int *a);                  /* magnitude square        */
-#else
-#define  s_mp_sqr(a) s_mp_mul(a, a)
-#endif
-mp_err   s_mp_div(mp_int *rem, mp_int *div, mp_int *quot); /* magnitude div */
-mp_err   s_mp_exptmod(const mp_int *a, const mp_int *b, const mp_int *m, mp_int *c);
-mp_err   s_mp_2expt(mp_int *a, mp_digit k);    /* a = 2^k                 */
-int      s_mp_cmp(const mp_int *a, const mp_int *b); /* magnitude comparison */
-int      s_mp_cmp_d(const mp_int *a, mp_digit d); /* magnitude digit compare */
-int      s_mp_ispow2(const mp_int *v);         /* is v a power of 2?      */
-int      s_mp_ispow2d(mp_digit d);             /* is d a power of 2?      */
-
-int      s_mp_tovalue(char ch, int r);          /* convert ch to value    */
-char     s_mp_todigit(mp_digit val, int r, int low); /* convert val to digit */
-int      s_mp_outlen(int bits, int r);          /* output length in bytes */
-mp_digit s_mp_invmod_radix(mp_digit P);   /* returns (P ** -1) mod RADIX */
-mp_err   s_mp_invmod_odd_m( const mp_int *a, const mp_int *m, mp_int *c);
-mp_err   s_mp_invmod_2d(    const mp_int *a, mp_size k,       mp_int *c);
-mp_err   s_mp_invmod_even_m(const mp_int *a, const mp_int *m, mp_int *c);
-
-#ifdef NSS_USE_COMBA
-
-#define IS_POWER_OF_2(a) ((a) && !((a) & ((a)-1)))
-
-void s_mp_mul_comba_4(const mp_int *A, const mp_int *B, mp_int *C);
-void s_mp_mul_comba_8(const mp_int *A, const mp_int *B, mp_int *C);
-void s_mp_mul_comba_16(const mp_int *A, const mp_int *B, mp_int *C);
-void s_mp_mul_comba_32(const mp_int *A, const mp_int *B, mp_int *C);
-
-void s_mp_sqr_comba_4(const mp_int *A, mp_int *B);
-void s_mp_sqr_comba_8(const mp_int *A, mp_int *B);
-void s_mp_sqr_comba_16(const mp_int *A, mp_int *B);
-void s_mp_sqr_comba_32(const mp_int *A, mp_int *B);
-
-#endif /* end NSS_USE_COMBA */
-
-/* ------ mpv functions, operate on arrays of digits, not on mp_int's ------ */
-#if defined (__OS2__) && defined (__IBMC__)
-#define MPI_ASM_DECL __cdecl
-#else
-#define MPI_ASM_DECL
-#endif
-
-#ifdef MPI_AMD64
-
-mp_digit MPI_ASM_DECL s_mpv_mul_set_vec64(mp_digit*, mp_digit *, mp_size, mp_digit);
-mp_digit MPI_ASM_DECL s_mpv_mul_add_vec64(mp_digit*, const mp_digit*, mp_size, mp_digit);
-
-/* c = a * b */
-#define s_mpv_mul_d(a, a_len, b, c) \
-	((mp_digit *)c)[a_len] = s_mpv_mul_set_vec64(c, a, a_len, b)
-
-/* c += a * b */
-#define s_mpv_mul_d_add(a, a_len, b, c) \
-	((mp_digit *)c)[a_len] = s_mpv_mul_add_vec64(c, a, a_len, b)
-
-
-#else
-
-void     MPI_ASM_DECL s_mpv_mul_d(const mp_digit *a, mp_size a_len,
-                                        mp_digit b, mp_digit *c);
-void     MPI_ASM_DECL s_mpv_mul_d_add(const mp_digit *a, mp_size a_len,
-                                            mp_digit b, mp_digit *c);
-
-#endif
-
-void     MPI_ASM_DECL s_mpv_mul_d_add_prop(const mp_digit *a,
-                                                mp_size a_len, mp_digit b, 
-			                        mp_digit *c);
-void     MPI_ASM_DECL s_mpv_sqr_add_prop(const mp_digit *a,
-                                                mp_size a_len,
-                                                mp_digit *sqrs);
-
-mp_err   MPI_ASM_DECL s_mpv_div_2dx1d(mp_digit Nhi, mp_digit Nlo,
-                            mp_digit divisor, mp_digit *quot, mp_digit *rem);
-
-/* c += a * b * (MP_RADIX ** offset);  */
-#define s_mp_mul_d_add_offset(a, b, c, off) \
-(s_mpv_mul_d_add_prop(MP_DIGITS(a), MP_USED(a), b, MP_DIGITS(c) + off), MP_OKAY)
-
-typedef struct {
-  mp_int       N;	/* modulus N */
-  mp_digit     n0prime; /* n0' = - (n0 ** -1) mod MP_RADIX */
-} mp_mont_modulus;
-
-mp_err s_mp_mul_mont(const mp_int *a, const mp_int *b, mp_int *c, 
-	               mp_mont_modulus *mmm);
-mp_err s_mp_redc(mp_int *T, mp_mont_modulus *mmm);
-
-/*
- * s_mpi_getProcessorLineSize() returns the size in bytes of the cache line
- * if a cache exists, or zero if there is no cache. If more than one
- * cache line exists, it should return the smallest line size (which is
- * usually the L1 cache).
- *
- * mp_modexp uses this information to make sure that private key information
- * isn't being leaked through the cache.
- *
- * see mpcpucache.c for the implementation.
- */
-unsigned long s_mpi_getProcessorLineSize();
-
-/* }}} */
-#endif
-