Move Source/WTF/wtf to Source/wtf

Source/WTF/wtf/dtoa/strtod.cc

Index: Source/WTF/wtf/dtoa/strtod.cc
diff --git a/Source/WTF/wtf/dtoa/strtod.cc b/Source/WTF/wtf/dtoa/strtod.cc
deleted file mode 100644
index 477e7158c373751da67623b2ae96b521f83d993e..0000000000000000000000000000000000000000
--- a/Source/WTF/wtf/dtoa/strtod.cc
+++ /dev/null
@@ -1,447 +0,0 @@
-// Copyright 2010 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include "config.h"
-
-#include <stdarg.h>
-#include <limits.h>
-
-#include "strtod.h"
-#include "bignum.h"
-#include "cached-powers.h"
-#include "double.h"
-
-namespace WTF {
-
-namespace double_conversion {
-    
-    // 2^53 = 9007199254740992.
-    // Any integer with at most 15 decimal digits will hence fit into a double
-    // (which has a 53bit significand) without loss of precision.
-    static const int kMaxExactDoubleIntegerDecimalDigits = 15;
-    // 2^64 = 18446744073709551616 > 10^19
-    static const int kMaxUint64DecimalDigits = 19;
-    
-    // Max double: 1.7976931348623157 x 10^308
-    // Min non-zero double: 4.9406564584124654 x 10^-324
-    // Any x >= 10^309 is interpreted as +infinity.
-    // Any x <= 10^-324 is interpreted as 0.
-    // Note that 2.5e-324 (despite being smaller than the min double) will be read
-    // as non-zero (equal to the min non-zero double).
-    static const int kMaxDecimalPower = 309;
-    static const int kMinDecimalPower = -324;
-    
-    // 2^64 = 18446744073709551616
-    static const uint64_t kMaxUint64 = UINT64_2PART_C(0xFFFFFFFF, FFFFFFFF);
-    
-    
-    static const double exact_powers_of_ten[] = {
-        1.0,  // 10^0
-        10.0,
-        100.0,
-        1000.0,
-        10000.0,
-        100000.0,
-        1000000.0,
-        10000000.0,
-        100000000.0,
-        1000000000.0,
-        10000000000.0,  // 10^10
-        100000000000.0,
-        1000000000000.0,
-        10000000000000.0,
-        100000000000000.0,
-        1000000000000000.0,
-        10000000000000000.0,
-        100000000000000000.0,
-        1000000000000000000.0,
-        10000000000000000000.0,
-        100000000000000000000.0,  // 10^20
-        1000000000000000000000.0,
-        // 10^22 = 0x21e19e0c9bab2400000 = 0x878678326eac9 * 2^22
-        10000000000000000000000.0
-    };
-    static const int kExactPowersOfTenSize = ARRAY_SIZE(exact_powers_of_ten);
-    
-    // Maximum number of significant digits in the decimal representation.
-    // In fact the value is 772 (see conversions.cc), but to give us some margin
-    // we round up to 780.
-    static const int kMaxSignificantDecimalDigits = 780;
-    
-    static Vector<const char> TrimLeadingZeros(Vector<const char> buffer) {
-        for (int i = 0; i < buffer.length(); i++) {
-            if (buffer[i] != '0') {
-                return buffer.SubVector(i, buffer.length());
-            }
-        }
-        return Vector<const char>(buffer.start(), 0);
-    }
-    
-    
-    static Vector<const char> TrimTrailingZeros(Vector<const char> buffer) {
-        for (int i = buffer.length() - 1; i >= 0; --i) {
-            if (buffer[i] != '0') {
-                return buffer.SubVector(0, i + 1);
-            }
-        }
-        return Vector<const char>(buffer.start(), 0);
-    }
-    
-    
-    static void TrimToMaxSignificantDigits(Vector<const char> buffer,
-                                           int exponent,
-                                           char* significant_buffer,
-                                           int* significant_exponent) {
-        for (int i = 0; i < kMaxSignificantDecimalDigits - 1; ++i) {
-            significant_buffer[i] = buffer[i];
-        }
-        // The input buffer has been trimmed. Therefore the last digit must be
-        // different from '0'.
-        ASSERT(buffer[buffer.length() - 1] != '0');
-        // Set the last digit to be non-zero. This is sufficient to guarantee
-        // correct rounding.
-        significant_buffer[kMaxSignificantDecimalDigits - 1] = '1';
-        *significant_exponent =
-        exponent + (buffer.length() - kMaxSignificantDecimalDigits);
-    }
-    
-    // Reads digits from the buffer and converts them to a uint64.
-    // Reads in as many digits as fit into a uint64.
-    // When the string starts with "1844674407370955161" no further digit is read.
-    // Since 2^64 = 18446744073709551616 it would still be possible read another
-    // digit if it was less or equal than 6, but this would complicate the code.
-    static uint64_t ReadUint64(Vector<const char> buffer,
-                               int* number_of_read_digits) {
-        uint64_t result = 0;
-        int i = 0;
-        while (i < buffer.length() && result <= (kMaxUint64 / 10 - 1)) {
-            int digit = buffer[i++] - '0';
-            ASSERT(0 <= digit && digit <= 9);
-            result = 10 * result + digit;
-        }
-        *number_of_read_digits = i;
-        return result;
-    }
-    
-    
-    // Reads a DiyFp from the buffer.
-    // The returned DiyFp is not necessarily normalized.
-    // If remaining_decimals is zero then the returned DiyFp is accurate.
-    // Otherwise it has been rounded and has error of at most 1/2 ulp.
-    static void ReadDiyFp(Vector<const char> buffer,
-                          DiyFp* result,
-                          int* remaining_decimals) {
-        int read_digits;
-        uint64_t significand = ReadUint64(buffer, &read_digits);
-        if (buffer.length() == read_digits) {
-            *result = DiyFp(significand, 0);
-            *remaining_decimals = 0;
-        } else {
-            // Round the significand.
-            if (buffer[read_digits] >= '5') {
-                significand++;
-            }
-            // Compute the binary exponent.
-            int exponent = 0;
-            *result = DiyFp(significand, exponent);
-            *remaining_decimals = buffer.length() - read_digits;
-        }
-    }
-    
-    
-    static bool DoubleStrtod(Vector<const char> trimmed,
-                             int exponent,
-                             double* result) {
-#if !defined(DOUBLE_CONVERSION_CORRECT_DOUBLE_OPERATIONS)
-        // On x86 the floating-point stack can be 64 or 80 bits wide. If it is
-        // 80 bits wide (as is the case on Linux) then double-rounding occurs and the
-        // result is not accurate.
-        // We know that Windows32 uses 64 bits and is therefore accurate.
-        // Note that the ARM simulator is compiled for 32bits. It therefore exhibits
-        // the same problem.
-        return false;
-#endif
-        if (trimmed.length() <= kMaxExactDoubleIntegerDecimalDigits) {
-            int read_digits;
-            // The trimmed input fits into a double.
-            // If the 10^exponent (resp. 10^-exponent) fits into a double too then we
-            // can compute the result-double simply by multiplying (resp. dividing) the
-            // two numbers.
-            // This is possible because IEEE guarantees that floating-point operations
-            // return the best possible approximation.
-            if (exponent < 0 && -exponent < kExactPowersOfTenSize) {
-                // 10^-exponent fits into a double.
-                *result = static_cast<double>(ReadUint64(trimmed, &read_digits));
-                ASSERT(read_digits == trimmed.length());
-                *result /= exact_powers_of_ten[-exponent];
-                return true;
-            }
-            if (0 <= exponent && exponent < kExactPowersOfTenSize) {
-                // 10^exponent fits into a double.
-                *result = static_cast<double>(ReadUint64(trimmed, &read_digits));
-                ASSERT(read_digits == trimmed.length());
-                *result *= exact_powers_of_ten[exponent];
-                return true;
-            }
-            int remaining_digits =
-            kMaxExactDoubleIntegerDecimalDigits - trimmed.length();
-            if ((0 <= exponent) &&
-                (exponent - remaining_digits < kExactPowersOfTenSize)) {
-                // The trimmed string was short and we can multiply it with
-                // 10^remaining_digits. As a result the remaining exponent now fits
-                // into a double too.
-                *result = static_cast<double>(ReadUint64(trimmed, &read_digits));
-                ASSERT(read_digits == trimmed.length());
-                *result *= exact_powers_of_ten[remaining_digits];
-                *result *= exact_powers_of_ten[exponent - remaining_digits];
-                return true;
-            }
-        }
-        return false;
-    }
-    
-    
-    // Returns 10^exponent as an exact DiyFp.
-    // The given exponent must be in the range [1; kDecimalExponentDistance[.
-    static DiyFp AdjustmentPowerOfTen(int exponent) {
-        ASSERT(0 < exponent);
-        ASSERT(exponent < PowersOfTenCache::kDecimalExponentDistance);
-        // Simply hardcode the remaining powers for the given decimal exponent
-        // distance.
-        ASSERT(PowersOfTenCache::kDecimalExponentDistance == 8);
-        switch (exponent) {
-            case 1: return DiyFp(UINT64_2PART_C(0xa0000000, 00000000), -60);
-            case 2: return DiyFp(UINT64_2PART_C(0xc8000000, 00000000), -57);
-            case 3: return DiyFp(UINT64_2PART_C(0xfa000000, 00000000), -54);
-            case 4: return DiyFp(UINT64_2PART_C(0x9c400000, 00000000), -50);
-            case 5: return DiyFp(UINT64_2PART_C(0xc3500000, 00000000), -47);
-            case 6: return DiyFp(UINT64_2PART_C(0xf4240000, 00000000), -44);
-            case 7: return DiyFp(UINT64_2PART_C(0x98968000, 00000000), -40);
-            default:
-                UNREACHABLE();
-                return DiyFp(0, 0);
-        }
-    }
-    
-    
-    // If the function returns true then the result is the correct double.
-    // Otherwise it is either the correct double or the double that is just below
-    // the correct double.
-    static bool DiyFpStrtod(Vector<const char> buffer,
-                            int exponent,
-                            double* result) {
-        DiyFp input;
-        int remaining_decimals;
-        ReadDiyFp(buffer, &input, &remaining_decimals);
-        // Since we may have dropped some digits the input is not accurate.
-        // If remaining_decimals is different than 0 than the error is at most
-        // .5 ulp (unit in the last place).
-        // We don't want to deal with fractions and therefore keep a common
-        // denominator.
-        const int kDenominatorLog = 3;
-        const int kDenominator = 1 << kDenominatorLog;
-        // Move the remaining decimals into the exponent.
-        exponent += remaining_decimals;
-        int error = (remaining_decimals == 0 ? 0 : kDenominator / 2);
-        
-        int old_e = input.e();
-        input.Normalize();
-        error <<= old_e - input.e();
-        
-        ASSERT(exponent <= PowersOfTenCache::kMaxDecimalExponent);
-        if (exponent < PowersOfTenCache::kMinDecimalExponent) {
-            *result = 0.0;
-            return true;
-        }
-        DiyFp cached_power;
-        int cached_decimal_exponent;
-        PowersOfTenCache::GetCachedPowerForDecimalExponent(exponent,
-                                                           &cached_power,
-                                                           &cached_decimal_exponent);
-        
-        if (cached_decimal_exponent != exponent) {
-            int adjustment_exponent = exponent - cached_decimal_exponent;
-            DiyFp adjustment_power = AdjustmentPowerOfTen(adjustment_exponent);
-            input.Multiply(adjustment_power);
-            if (kMaxUint64DecimalDigits - buffer.length() >= adjustment_exponent) {
-                // The product of input with the adjustment power fits into a 64 bit
-                // integer.
-                ASSERT(DiyFp::kSignificandSize == 64);
-            } else {
-                // The adjustment power is exact. There is hence only an error of 0.5.
-                error += kDenominator / 2;
-            }
-        }
-        
-        input.Multiply(cached_power);
-        // The error introduced by a multiplication of a*b equals
-        //   error_a + error_b + error_a*error_b/2^64 + 0.5
-        // Substituting a with 'input' and b with 'cached_power' we have
-        //   error_b = 0.5  (all cached powers have an error of less than 0.5 ulp),
-        //   error_ab = 0 or 1 / kDenominator > error_a*error_b/ 2^64
-        int error_b = kDenominator / 2;
-        int error_ab = (error == 0 ? 0 : 1);  // We round up to 1.
-        int fixed_error = kDenominator / 2;
-        error += error_b + error_ab + fixed_error;
-        
-        old_e = input.e();
-        input.Normalize();
-        error <<= old_e - input.e();
-        
-        // See if the double's significand changes if we add/subtract the error.
-        int order_of_magnitude = DiyFp::kSignificandSize + input.e();
-        int effective_significand_size =
-        Double::SignificandSizeForOrderOfMagnitude(order_of_magnitude);
-        int precision_digits_count =
-        DiyFp::kSignificandSize - effective_significand_size;
-        if (precision_digits_count + kDenominatorLog >= DiyFp::kSignificandSize) {
-            // This can only happen for very small denormals. In this case the
-            // half-way multiplied by the denominator exceeds the range of an uint64.
-            // Simply shift everything to the right.
-            int shift_amount = (precision_digits_count + kDenominatorLog) -
-            DiyFp::kSignificandSize + 1;
-            input.set_f(input.f() >> shift_amount);
-            input.set_e(input.e() + shift_amount);
-            // We add 1 for the lost precision of error, and kDenominator for
-            // the lost precision of input.f().
-            error = (error >> shift_amount) + 1 + kDenominator;
-            precision_digits_count -= shift_amount;
-        }
-        // We use uint64_ts now. This only works if the DiyFp uses uint64_ts too.
-        ASSERT(DiyFp::kSignificandSize == 64);
-        ASSERT(precision_digits_count < 64);
-        uint64_t one64 = 1;
-        uint64_t precision_bits_mask = (one64 << precision_digits_count) - 1;
-        uint64_t precision_bits = input.f() & precision_bits_mask;
-        uint64_t half_way = one64 << (precision_digits_count - 1);
-        precision_bits *= kDenominator;
-        half_way *= kDenominator;
-        DiyFp rounded_input(input.f() >> precision_digits_count,
-                            input.e() + precision_digits_count);
-        if (precision_bits >= half_way + error) {
-            rounded_input.set_f(rounded_input.f() + 1);
-        }
-        // If the last_bits are too close to the half-way case than we are too
-        // inaccurate and round down. In this case we return false so that we can
-        // fall back to a more precise algorithm.
-        
-        *result = Double(rounded_input).value();
-        if (half_way - error < precision_bits && precision_bits < half_way + error) {
-            // Too imprecise. The caller will have to fall back to a slower version.
-            // However the returned number is guaranteed to be either the correct
-            // double, or the next-lower double.
-            return false;
-        } else {
-            return true;
-        }
-    }
-    
-    
-    // Returns the correct double for the buffer*10^exponent.
-    // The variable guess should be a close guess that is either the correct double
-    // or its lower neighbor (the nearest double less than the correct one).
-    // Preconditions:
-    //   buffer.length() + exponent <= kMaxDecimalPower + 1
-    //   buffer.length() + exponent > kMinDecimalPower
-    //   buffer.length() <= kMaxDecimalSignificantDigits
-    static double BignumStrtod(Vector<const char> buffer,
-                               int exponent,
-                               double guess) {
-        if (guess == Double::Infinity()) {
-            return guess;
-        }
-        
-        DiyFp upper_boundary = Double(guess).UpperBoundary();
-        
-        ASSERT(buffer.length() + exponent <= kMaxDecimalPower + 1);
-        ASSERT(buffer.length() + exponent > kMinDecimalPower);
-        ASSERT(buffer.length() <= kMaxSignificantDecimalDigits);
-        // Make sure that the Bignum will be able to hold all our numbers.
-        // Our Bignum implementation has a separate field for exponents. Shifts will
-        // consume at most one bigit (< 64 bits).
-        // ln(10) == 3.3219...
-        ASSERT(((kMaxDecimalPower + 1) * 333 / 100) < Bignum::kMaxSignificantBits);
-        Bignum input;
-        Bignum boundary;
-        input.AssignDecimalString(buffer);
-        boundary.AssignUInt64(upper_boundary.f());
-        if (exponent >= 0) {
-            input.MultiplyByPowerOfTen(exponent);
-        } else {
-            boundary.MultiplyByPowerOfTen(-exponent);
-        }
-        if (upper_boundary.e() > 0) {
-            boundary.ShiftLeft(upper_boundary.e());
-        } else {
-            input.ShiftLeft(-upper_boundary.e());
-        }
-        int comparison = Bignum::Compare(input, boundary);
-        if (comparison < 0) {
-            return guess;
-        } else if (comparison > 0) {
-            return Double(guess).NextDouble();
-        } else if ((Double(guess).Significand() & 1) == 0) {
-            // Round towards even.
-            return guess;
-        } else {
-            return Double(guess).NextDouble();
-        }
-    }
-    
-    
-    double Strtod(Vector<const char> buffer, int exponent) {
-        Vector<const char> left_trimmed = TrimLeadingZeros(buffer);
-        Vector<const char> trimmed = TrimTrailingZeros(left_trimmed);
-        exponent += left_trimmed.length() - trimmed.length();
-        if (trimmed.length() == 0) return 0.0;
-        if (trimmed.length() > kMaxSignificantDecimalDigits) {
-            char significant_buffer[kMaxSignificantDecimalDigits];
-            int significant_exponent;
-            TrimToMaxSignificantDigits(trimmed, exponent,
-                                       significant_buffer, &significant_exponent);
-            return Strtod(Vector<const char>(significant_buffer,
-                                             kMaxSignificantDecimalDigits),
-                          significant_exponent);
-        }
-        if (exponent + trimmed.length() - 1 >= kMaxDecimalPower) {
-            return Double::Infinity();
-        }
-        if (exponent + trimmed.length() <= kMinDecimalPower) {
-            return 0.0;
-        }
-        
-        double guess;
-        if (DoubleStrtod(trimmed, exponent, &guess) ||
-            DiyFpStrtod(trimmed, exponent, &guess)) {
-            return guess;
-        }
-        return BignumStrtod(trimmed, exponent, guess);
-    }
-    
-}  // namespace double_conversion
-
-} // namespace WTF