Move third_party/mojo/src/mojo/public to mojo/public

third_party/mojo/src/mojo/public/c/system/message_pipe.h

Index: third_party/mojo/src/mojo/public/c/system/message_pipe.h
diff --git a/third_party/mojo/src/mojo/public/c/system/message_pipe.h b/third_party/mojo/src/mojo/public/c/system/message_pipe.h
deleted file mode 100644
index f870150477b4e944f1e2624420d0f97f14a62fec..0000000000000000000000000000000000000000
--- a/third_party/mojo/src/mojo/public/c/system/message_pipe.h
+++ /dev/null
@@ -1,177 +0,0 @@
-// Copyright 2014 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-// This file contains types/constants and functions specific to message pipes.
-//
-// Note: This header should be compilable as C.
-
-#ifndef THIRD_PARTY_MOJO_SRC_MOJO_PUBLIC_C_SYSTEM_MESSAGE_PIPE_H_
-#define THIRD_PARTY_MOJO_SRC_MOJO_PUBLIC_C_SYSTEM_MESSAGE_PIPE_H_
-
-#include "third_party/mojo/src/mojo/public/c/system/macros.h"
-#include "third_party/mojo/src/mojo/public/c/system/system_export.h"
-#include "third_party/mojo/src/mojo/public/c/system/types.h"
-
-// |MojoCreateMessagePipeOptions|: Used to specify creation parameters for a
-// message pipe to |MojoCreateMessagePipe()|.
-//   |uint32_t struct_size|: Set to the size of the
-//       |MojoCreateMessagePipeOptions| struct. (Used to allow for future
-//       extensions.)
-//   |MojoCreateMessagePipeOptionsFlags flags|: Reserved for future use.
-//       |MOJO_CREATE_MESSAGE_PIPE_OPTIONS_FLAG_NONE|: No flags; default mode.
-
-typedef uint32_t MojoCreateMessagePipeOptionsFlags;
-
-#ifdef __cplusplus
-const MojoCreateMessagePipeOptionsFlags
-    MOJO_CREATE_MESSAGE_PIPE_OPTIONS_FLAG_NONE = 0;
-#else
-#define MOJO_CREATE_MESSAGE_PIPE_OPTIONS_FLAG_NONE \
-  ((MojoCreateMessagePipeOptionsFlags)0)
-#endif
-
-MOJO_STATIC_ASSERT(MOJO_ALIGNOF(int64_t) == 8, "int64_t has weird alignment");
-struct MOJO_ALIGNAS(8) MojoCreateMessagePipeOptions {
-  uint32_t struct_size;
-  MojoCreateMessagePipeOptionsFlags flags;
-};
-MOJO_STATIC_ASSERT(sizeof(MojoCreateMessagePipeOptions) == 8,
-                   "MojoCreateMessagePipeOptions has wrong size");
-
-// |MojoWriteMessageFlags|: Used to specify different modes to
-// |MojoWriteMessage()|.
-//   |MOJO_WRITE_MESSAGE_FLAG_NONE| - No flags; default mode.
-
-typedef uint32_t MojoWriteMessageFlags;
-
-#ifdef __cplusplus
-const MojoWriteMessageFlags MOJO_WRITE_MESSAGE_FLAG_NONE = 0;
-#else
-#define MOJO_WRITE_MESSAGE_FLAG_NONE ((MojoWriteMessageFlags)0)
-#endif
-
-// |MojoReadMessageFlags|: Used to specify different modes to
-// |MojoReadMessage()|.
-//   |MOJO_READ_MESSAGE_FLAG_NONE| - No flags; default mode.
-//   |MOJO_READ_MESSAGE_FLAG_MAY_DISCARD| - If the message is unable to be read
-//       for whatever reason (e.g., the caller-supplied buffer is too small),
-//       discard the message (i.e., simply dequeue it).
-
-typedef uint32_t MojoReadMessageFlags;
-
-#ifdef __cplusplus
-const MojoReadMessageFlags MOJO_READ_MESSAGE_FLAG_NONE = 0;
-const MojoReadMessageFlags MOJO_READ_MESSAGE_FLAG_MAY_DISCARD = 1 << 0;
-#else
-#define MOJO_READ_MESSAGE_FLAG_NONE ((MojoReadMessageFlags)0)
-#define MOJO_READ_MESSAGE_FLAG_MAY_DISCARD ((MojoReadMessageFlags)1 << 0)
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// Note: See the comment in functions.h about the meaning of the "optional"
-// label for pointer parameters.
-
-// Creates a message pipe, which is a bidirectional communication channel for
-// framed data (i.e., messages). Messages can contain plain data and/or Mojo
-// handles.
-//
-// |options| may be set to null for a message pipe with the default options.
-//
-// On success, |*message_pipe_handle0| and |*message_pipe_handle1| are set to
-// handles for the two endpoints (ports) for the message pipe.
-//
-// Returns:
-//   |MOJO_RESULT_OK| on success.
-//   |MOJO_RESULT_INVALID_ARGUMENT| if some argument was invalid (e.g.,
-//       |*options| is invalid).
-//   |MOJO_RESULT_RESOURCE_EXHAUSTED| if a process/system/quota/etc. limit has
-//       been reached.
-MOJO_SYSTEM_EXPORT MojoResult MojoCreateMessagePipe(
-    const struct MojoCreateMessagePipeOptions* options,  // Optional.
-    MojoHandle* message_pipe_handle0,                    // Out.
-    MojoHandle* message_pipe_handle1);                   // Out.
-
-// Writes a message to the message pipe endpoint given by |message_pipe_handle|,
-// with message data specified by |bytes| of size |num_bytes| and attached
-// handles specified by |handles| of count |num_handles|, and options specified
-// by |flags|. If there is no message data, |bytes| may be null, in which case
-// |num_bytes| must be zero. If there are no attached handles, |handles| may be
-// null, in which case |num_handles| must be zero.
-//
-// If handles are attached, on success the handles will no longer be valid (the
-// receiver will receive equivalent, but logically different, handles). Handles
-// to be sent should not be in simultaneous use (e.g., on another thread).
-//
-// Returns:
-//   |MOJO_RESULT_OK| on success (i.e., the message was enqueued).
-//   |MOJO_RESULT_INVALID_ARGUMENT| if some argument was invalid (e.g., if
-//       |message_pipe_handle| is not a valid handle, or some of the
-//       requirements above are not satisfied).
-//   |MOJO_RESULT_RESOURCE_EXHAUSTED| if some system limit has been reached, or
-//       the number of handles to send is too large (TODO(vtl): reconsider the
-//       latter case).
-//   |MOJO_RESULT_FAILED_PRECONDITION| if the other endpoint has been closed.
-//       Note that closing an endpoint is not necessarily synchronous (e.g.,
-//       across processes), so this function may succeed even if the other
-//       endpoint has been closed (in which case the message would be dropped).
-//   |MOJO_RESULT_UNIMPLEMENTED| if an unsupported flag was set in |*options|.
-//   |MOJO_RESULT_BUSY| if some handle to be sent is currently in use.
-//
-// TODO(vtl): Add a notion of capacity for message pipes, and return
-// |MOJO_RESULT_SHOULD_WAIT| if the message pipe is full.
-MOJO_SYSTEM_EXPORT MojoResult
-    MojoWriteMessage(MojoHandle message_pipe_handle,
-                     const void* bytes,  // Optional.
-                     uint32_t num_bytes,
-                     const MojoHandle* handles,  // Optional.
-                     uint32_t num_handles,
-                     MojoWriteMessageFlags flags);
-
-// Reads the next message from a message pipe, or indicates the size of the
-// message if it cannot fit in the provided buffers. The message will be read
-// in its entirety or not at all; if it is not, it will remain enqueued unless
-// the |MOJO_READ_MESSAGE_FLAG_MAY_DISCARD| flag was passed. At most one
-// message will be consumed from the queue, and the return value will indicate
-// whether a message was successfully read.
-//
-// |num_bytes| and |num_handles| are optional in/out parameters that on input
-// must be set to the sizes of the |bytes| and |handles| arrays, and on output
-// will be set to the actual number of bytes or handles contained in the
-// message (even if the message was not retrieved due to being too large).
-// Either |num_bytes| or |num_handles| may be null if the message is not
-// expected to contain the corresponding type of data, but such a call would
-// fail with |MOJO_RESULT_RESOURCE_EXHAUSTED| if the message in fact did
-// contain that type of data.
-//
-// |bytes| and |handles| will receive the contents of the message, if it is
-// retrieved. Either or both may be null, in which case the corresponding size
-// parameter(s) must also be set to zero or passed as null.
-//
-// Returns:
-//   |MOJO_RESULT_OK| on success (i.e., a message was actually read).
-//   |MOJO_RESULT_INVALID_ARGUMENT| if some argument was invalid.
-//   |MOJO_RESULT_FAILED_PRECONDITION| if the other endpoint has been closed.
-//   |MOJO_RESULT_RESOURCE_EXHAUSTED| if the message was too large to fit in the
-//       provided buffer(s). The message will have been left in the queue or
-//       discarded, depending on flags.
-//   |MOJO_RESULT_SHOULD_WAIT| if no message was available to be read.
-//
-// TODO(vtl): Reconsider the |MOJO_RESULT_RESOURCE_EXHAUSTED| error code; should
-// distinguish this from the hitting-system-limits case.
-MOJO_SYSTEM_EXPORT MojoResult
-    MojoReadMessage(MojoHandle message_pipe_handle,
-                    void* bytes,            // Optional out.
-                    uint32_t* num_bytes,    // Optional in/out.
-                    MojoHandle* handles,    // Optional out.
-                    uint32_t* num_handles,  // Optional in/out.
-                    MojoReadMessageFlags flags);
-
-#ifdef __cplusplus
-}  // extern "C"
-#endif
-
-#endif  // THIRD_PARTY_MOJO_SRC_MOJO_PUBLIC_C_SYSTEM_MESSAGE_PIPE_H_