Move //mojo/services/X/public/... to //mojo/services/X/... (part 1).

mojo/services/files/public/interfaces/ioctl_terminal.mojom

Index: mojo/services/files/public/interfaces/ioctl_terminal.mojom
diff --git a/mojo/services/files/public/interfaces/ioctl_terminal.mojom b/mojo/services/files/public/interfaces/ioctl_terminal.mojom
deleted file mode 100644
index 1996875add3389396be70bcfb163870b264c0f58..0000000000000000000000000000000000000000
--- a/mojo/services/files/public/interfaces/ioctl_terminal.mojom
+++ /dev/null
@@ -1,184 +0,0 @@
-// Copyright 2015 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-// Defines constants, etc. to be used with the |kIoctlTerminal| ioctl.
-//
-// TODO(vtl): Add constants for indices?
-
-[DartPackage="mojo_services"]
-module mojo.files;
-
-// For:
-//   Ioctl(kIoctlTerminal, array<uint32>? in_values)
-//       => (Error error, array<uint32>? out_values);
-//
-// A file that is *not* terminal-like should always respond with error
-// |UNIMPLEMENTED| (|out_values| is then undefined). The following applies to
-// files that *are* terminal-like.
-//
-// If |in_values| is null or empty, the response should be |OK| (|out_values| is
-// undefined). Thus |Ioctl(kIoctlTerminal, null)| can be used as a test for "is
-// a terminal".
-//
-// Otherwise, |in_values[0]| should be one of "subrequest" values described
-// below. (Subrequest values unknown to the implementation should be responded
-// to with error |UNIMPLEMENTED|.)
-//
-// Unless otherwise specified, nothing in |in_values| is required. Unless
-// otherwise specified, the presence of extra values beyond those specified (if
-// any) should result in error |INVALID_ARGUMENT|. In contrast, extra values in
-// |out_values| beyond those specified should be ignored.
-
-// Invalid subrequest. The response should error |UNIMPLEMENTED|.
-const uint32 kIoctlTerminalInvalid = 0;
-
-// Get terminal ("termios") settings subrequest. On |OK|:
-//   * |out_values[0]| is "iflag" (input mode flags);
-//   * |out_values[1]| is "oflag" (output mode flags);
-//   * |out_values[2]| is "cflag" (control mode flags);
-//   * |out_values[3]| is "lflag" (local mode flags);
-//   * |out_values[4]| is "ispeed" (input speed; 0 if unavailable);
-//   * |out_values[5]| is "ospeed" (output speed; 1 if unavailable);
-//   * |out_values[6..]| are "cc" (control/special characters -- there may be
-//     any number of these).
-// Constants for the flags, etc. are defined further below.
-const uint32 kIoctlTerminalGetSettings = 1;
-
-// Set terminal ("termios") settings subrequest. |in_values[1..6]| should be
-// like |out_values[0..5]| for |kIoctlTerminalGetSettings|, and |in_values[7..]|
-// should be like |out_values[6..]| (any missing "cc" values are left
-// untouched and unknown/extra "cc" values are ignored).
-const uint32 kIoctlTerminalSetSettings = 2;
-
-// Get terminal "window" size subrequest. |out_values[0..1]| should be the
-// number of rows and columns, respectively. This may also result in error
-// |UNAVAILABLE| (and no |out_values|), if the size is not available for
-// whatever reason.
-// TODO(vtl): This is unlike the Linux/POSIX ioctl, I think, which will just use
-// a previous/default value.
-const uint32 kIoctlTerminalGetWindowSize = 3;
-
-// Set terminal "window" size subrequest. |in_values[1..2]| should be the
-// requested number of rows and and columns, respectively. If the error is |OK|
-// or |OUT_OF_RANGE|, |out_values[0..1]| should be the actual set number of rows
-// and columns (if |OK| these should be the same as the requested values; on
-// other errors, |out_values| is undefined).
-const uint32 kIoctlTerminalSetWindowSize = 4;
-
-// Constants for "termios" fields ----------------------------------------------
-
-// Number of base/nonoptional fields:
-const uint32 kIoctlTerminalTermiosBaseFieldCount = 6;
-
-// Indices for the base fields:
-const uint32 kIoctlTerminalTermiosIFlagIndex  = 0;
-const uint32 kIoctlTerminalTermiosOFlagIndex  = 1;
-const uint32 kIoctlTerminalTermiosCFlagIndex  = 2;
-const uint32 kIoctlTerminalTermiosLFlagIndex  = 3;
-const uint32 kIoctlTerminalTermiosISpeedIndex = 4;
-const uint32 kIoctlTerminalTermiosOSpeedIndex = 5;
-
-// Current number of "cc" fields:
-const uint32 kIoctlTerminalTermiosCtrlCharCount = 17;
-
-// "cc" field indices:
-// Note: Not all of these may be available.
-const uint32 kIoctlTerminalTermiosCtrlCharVINTRIndex    = 17;
-const uint32 kIoctlTerminalTermiosCtrlCharVQUITIndex    = 18;
-const uint32 kIoctlTerminalTermiosCtrlCharVERASEIndex   = 19;
-const uint32 kIoctlTerminalTermiosCtrlCharVKILLIndex    = 20;
-const uint32 kIoctlTerminalTermiosCtrlCharVEOFIndex     = 21;
-const uint32 kIoctlTerminalTermiosCtrlCharVTIMEIndex    = 22;
-const uint32 kIoctlTerminalTermiosCtrlCharVMINIndex     = 23;
-const uint32 kIoctlTerminalTermiosCtrlCharVSWTCIndex    = 24;
-const uint32 kIoctlTerminalTermiosCtrlCharVSTARTIndex   = 25;
-const uint32 kIoctlTerminalTermiosCtrlCharVSTOPIndex    = 26;
-const uint32 kIoctlTerminalTermiosCtrlCharVSUSPIndex    = 27;
-const uint32 kIoctlTerminalTermiosCtrlCharVEOLIndex     = 28;
-const uint32 kIoctlTerminalTermiosCtrlCharVREPRINTIndex = 29;
-const uint32 kIoctlTerminalTermiosCtrlCharVDISCARDIndex = 30;
-const uint32 kIoctlTerminalTermiosCtrlCharVWERASEIndex  = 31;
-const uint32 kIoctlTerminalTermiosCtrlCharVLNEXTIndex   = 32;
-const uint32 kIoctlTerminalTermiosCtrlCharVEOL2Index    = 33;
-
-// "iflag" flag values:
-const uint32 kIoctlTerminalTermiosIFlagIGNBRK  = 0x0001;
-const uint32 kIoctlTerminalTermiosIFlagBRKINT  = 0x0002;
-const uint32 kIoctlTerminalTermiosIFlagIGNPAR  = 0x0004;
-const uint32 kIoctlTerminalTermiosIFlagPARMRK  = 0x0008;
-const uint32 kIoctlTerminalTermiosIFlagINPCK   = 0x0010;
-const uint32 kIoctlTerminalTermiosIFlagISTRIP  = 0x0020;
-const uint32 kIoctlTerminalTermiosIFlagINLCR   = 0x0040;
-const uint32 kIoctlTerminalTermiosIFlagIGNCR   = 0x0080;
-const uint32 kIoctlTerminalTermiosIFlagICRNL   = 0x0100;
-const uint32 kIoctlTerminalTermiosIFlagIUCLC   = 0x0200;
-const uint32 kIoctlTerminalTermiosIFlagIXON    = 0x0400;
-const uint32 kIoctlTerminalTermiosIFlagIXANY   = 0x0800;
-const uint32 kIoctlTerminalTermiosIFlagIXOFF   = 0x1000;
-const uint32 kIoctlTerminalTermiosIFlagIMAXBEL = 0x2000;
-const uint32 kIoctlTerminalTermiosIFlagIUTF8   = 0x4000;
-
-// "oflag" flag values:
-const uint32 kIoctlTerminalTermiosOFlagOPOST  = 0x0001;
-const uint32 kIoctlTerminalTermiosOFlagOLCUC  = 0x0002;
-const uint32 kIoctlTerminalTermiosOFlagONLCR  = 0x0004;
-const uint32 kIoctlTerminalTermiosOFlagOCRNL  = 0x0008;
-const uint32 kIoctlTerminalTermiosOFlagONOCR  = 0x0010;
-const uint32 kIoctlTerminalTermiosOFlagONLRET = 0x0020;
-const uint32 kIoctlTerminalTermiosOFlagOFILL  = 0x0040;
-const uint32 kIoctlTerminalTermiosOFlagOFDEL  = 0x0080;
-
-const uint32 kIoctlTerminalTermiosOFlagNLDLY  = 0x0100;  // Mask.
-const uint32 kIoctlTerminalTermiosOFlagNL0    = 0x0000;
-const uint32 kIoctlTerminalTermiosOFlagNL1    = 0x0100;
-
-const uint32 kIoctlTerminalTermiosOFlagCRDLY  = 0x0600;  // Mask.
-const uint32 kIoctlTerminalTermiosOFlagCR0    = 0x0000;
-const uint32 kIoctlTerminalTermiosOFlagCR1    = 0x0200;
-const uint32 kIoctlTerminalTermiosOFlagCR2    = 0x0400;
-const uint32 kIoctlTerminalTermiosOFlagCR3    = 0x0600;
-
-const uint32 kIoctlTerminalTermiosOFlagTABDLY = 0x1800;  // Mask.
-const uint32 kIoctlTerminalTermiosOFlagTAB0   = 0x0000;
-const uint32 kIoctlTerminalTermiosOFlagTAB1   = 0x0800;
-const uint32 kIoctlTerminalTermiosOFlagTAB2   = 0x1000;
-const uint32 kIoctlTerminalTermiosOFlagTAB3   = 0x1800;
-
-const uint32 kIoctlTerminalTermiosOFlagBSDLY  = 0x2000;  // Mask.
-const uint32 kIoctlTerminalTermiosOFlagBS0    = 0x0000;
-const uint32 kIoctlTerminalTermiosOFlagBS1    = 0x2000;
-
-const uint32 kIoctlTerminalTermiosOFlagVTDLY  = 0x4000;  // Mask.
-const uint32 kIoctlTerminalTermiosOFlagVT0    = 0x0000;
-const uint32 kIoctlTerminalTermiosOFlagVT1    = 0x4000;
-
-const uint32 kIoctlTerminalTermiosOFlagFFDLY  = 0x8000;  // Mask.
-const uint32 kIoctlTerminalTermiosOFlagFF0    = 0x0000;
-const uint32 kIoctlTerminalTermiosOFlagFF1    = 0x8000;
-
-// "cflag" flag values:
-// Note: We don't have "CBAUD" in our "cflag".
-const uint32 kIoctlTerminalTermiosCFlagCSIZE  = 0x0003;  // Mask.
-const uint32 kIoctlTerminalTermiosCFlagCS5    = 0x0000;
-const uint32 kIoctlTerminalTermiosCFlagCS6    = 0x0001;
-const uint32 kIoctlTerminalTermiosCFlagCS7    = 0x0002;
-const uint32 kIoctlTerminalTermiosCFlagCS8    = 0x0003;
-
-const uint32 kIoctlTerminalTermiosCFlagCSTOPB = 0x0004;
-const uint32 kIoctlTerminalTermiosCFlagCREAD  = 0x0008;
-const uint32 kIoctlTerminalTermiosCFlagPARENB = 0x0010;
-const uint32 kIoctlTerminalTermiosCFlagPARODD = 0x0020;
-const uint32 kIoctlTerminalTermiosCFlagHUPCL  = 0x0040;
-const uint32 kIoctlTerminalTermiosCFlagCLOCAL = 0x0080;
-
-// "lflag" flag values:
-const uint32 kIoctlTerminalTermiosLFlagISIG   = 0x0001;
-const uint32 kIoctlTerminalTermiosLFlagICANON = 0x0002;
-const uint32 kIoctlTerminalTermiosLFlagXCASE  = 0x0004;
-const uint32 kIoctlTerminalTermiosLFlagECHO   = 0x0008;
-const uint32 kIoctlTerminalTermiosLFlagECHOE  = 0x0010;
-const uint32 kIoctlTerminalTermiosLFlagECHOK  = 0x0020;
-const uint32 kIoctlTerminalTermiosLFlagECHONL = 0x0040;
-const uint32 kIoctlTerminalTermiosLFlagNOFLSH = 0x0080;
-const uint32 kIoctlTerminalTermiosLFlagTOSTOP = 0x0100;