SPDY - Re-land greedy read support for SpdySession

net/spdy/spdy_session.h

 // Copyright (c) 2012 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
 #ifndef NET_SPDY_SPDY_SESSION_H_
 #define NET_SPDY_SPDY_SESSION_H_
 
 #include <deque>
 #include <list>
 #include <map>
@@ skipping 28 matching lines @@
 // reasonably with ethernet. Chop the world into 2-packet chunks.  This is
 // somewhat arbitrary, but is reasonably small and ensures that we elicit
 // ACKs quickly from TCP (because TCP tries to only ACK every other packet).
 const int kMss = 1430;
 // The 8 is the size of the SPDY frame header.
 const int kMaxSpdyFrameChunkSize = (2 * kMss) - 8;
 
 // Specifies the maxiumum concurrent streams server could send (via push).
 const int kMaxConcurrentPushedStreams = 1000;
 
+// Specifies the number of bytes read synchronously (without yielding) if the
+// data is available.
+const int kMaxReadBytes = 32 * 1024;
+
 // The initial receive window size for both streams and sessions.
 const int32 kDefaultInitialRecvWindowSize = 10 * 1024 * 1024;  // 10MB
 
 class BoundNetLog;
 struct LoadTimingInfo;
 class SpdyStream;
 class SSLInfo;
 
 enum SpdyProtocolErrorDetails {
   // SpdyFramer::SpdyErrors
@@ skipping 270 matching lines @@
                               uint32 delta_window_size);
 
   // Called by a stream to increase this session's receive window size
   // by |delta_window_size|, which must be at least 1 and must not
   // cause this session's receive window size to overflow, possibly
   // also sending a WINDOW_UPDATE frame. Does nothing if session flow
   // control is turned off.
   void IncreaseRecvWindowSize(int32 delta_window_size);
 
   // If session is closed, no new streams/transactions should be created.
-  bool IsClosed() const { return state_ == CLOSED; }
+  bool IsClosed() const { return state_ == STATE_CLOSED; }
 
   // Closes this session.  This will close all active streams and mark
   // the session as permanently closed.
   // |err| should not be OK; this function is intended to be called on
   // error.
   // |remove_from_pool| indicates whether to also remove the session from the
   // session pool.
   // |description| indicates the reason for the error.
   void CloseSessionOnError(net::Error err,
                            bool remove_from_pool,
@@ skipping 129 matching lines @@
                      const SpdyIOBufferProducer* rhs) const {
       return lhs->GetPriority() < rhs->GetPriority();
     }
   };
 
   typedef std::priority_queue<SpdyIOBufferProducer*,
                               std::vector<SpdyIOBufferProducer*>,
                               SpdyIOBufferProducerCompare> WriteQueue;
 
   enum State {
-    IDLE,
-    CONNECTING,
-    CONNECTED,
-    CLOSED
+    STATE_IDLE,
+    STATE_CONNECTING,
+    STATE_DO_READ,
+    STATE_DO_READ_COMPLETE,
+    STATE_CLOSED
   };
 
   virtual ~SpdySession();
 
   // Called by SpdyStreamRequest to start a request to create a
   // stream. If OK is returned, then |stream| will be filled in with a
   // valid stream. If ERR_IO_PENDING is returned, then
   // |request->OnRequestComplete()| will be called when the stream is
   // created (unless it is cancelled). Otherwise, no stream is created
   // and the error is returned.
   int TryCreateStream(SpdyStreamRequest* request,
                       scoped_refptr<SpdyStream>* stream);
 
   // Actually create a stream into |stream|. Returns OK if successful;
   // otherwise, returns an error and |stream| is not filled.
   int CreateStream(const SpdyStreamRequest& request,
                    scoped_refptr<SpdyStream>* stream);
 
   // Called by SpdyStreamRequest to remove |request| from the stream
   // creation queue.
   void CancelStreamRequest(SpdyStreamRequest* request);
 
   // Called when there is room to create more streams (e.g., a stream
   // was closed). Processes as many pending stream requests as
   // possible.
   void ProcessPendingStreamRequests();
 
+  // Start the DoLoop to read data from socket.
+  void StartRead();
+
+  // Try to make progress by reading and processing data.
+  int DoLoop(int result);
+  // The implementations of STATE_DO_READ/STATE_DO_READ_COMPLETE state changes
+  // of the state machine.
+  int DoRead();
+  int DoReadComplete(int bytes_read);
+
+  // Check if session is connected or not.
+  bool IsConnected() const {
+    return state_ == STATE_DO_READ || state_ == STATE_DO_READ_COMPLETE;
+  }
+
   // IO Callbacks
   void OnReadComplete(int result);
   void OnWriteComplete(int result);
 
   // Send relevant SETTINGS.  This is generally called on connection setup.
   void SendInitialSettings();
 
   // Helper method to send SETTINGS a frame.
   void SendSettings(const SettingsMap& settings);
 
@@ skipping 18 matching lines @@
   void WritePingFrame(uint32 unique_id);
 
   // Post a CheckPingStatus call after delay. Don't post if there is already
   // CheckPingStatus running.
   void PlanToCheckPingStatus();
 
   // Check the status of the connection. It calls |CloseSessionOnError| if we
   // haven't received any data in |kHungInterval| time period.
   void CheckPingStatus(base::TimeTicks last_check_time);
 
-  // Start reading from the socket.
-  // Returns OK on success, or an error on failure.
-  net::Error ReadSocket();
-
   // Write current data to the socket.
   void WriteSocketLater();
   void WriteSocket();
 
   // Get a new stream id.
   int GetNewStreamId();
 
   // Queue a frame for sending.
   // |frame| is the frame to send.
   // |priority| is the priority for insertion into the queue.
@@ skipping 143 matching lines @@
   // |spdy_session_pool_| owns us, therefore its lifetime must exceed ours.  We
   // set this to NULL after we are removed from the pool.
   SpdySessionPool* spdy_session_pool_;
   HttpServerProperties* const http_server_properties_;
 
   // The socket handle for this session.
   scoped_ptr<ClientSocketHandle> connection_;
 
   // The read buffer used to read data from the socket.
   scoped_refptr<IOBuffer> read_buffer_;
-  bool read_pending_;
 
   int stream_hi_water_mark_;  // The next stream id to use.
 
   // Queue, for each priority, of pending stream requests that have
   // not yet been satisfied.
   PendingStreamRequestQueue pending_create_stream_queues_[NUM_PRIORITIES];
 
   // A set of requests that are waiting to be completed (i.e., for the
   // stream to actually be created). This is necessary since we kick
   // off the stream creation asynchronously, and so the request may be
@@ skipping 49 matching lines @@
 
   // Limits
   size_t max_concurrent_streams_;  // 0 if no limit
   size_t max_concurrent_streams_limit_;
 
   // Some statistics counters for the session.
   int streams_initiated_count_;
   int streams_pushed_count_;
   int streams_pushed_and_claimed_count_;
   int streams_abandoned_count_;
-  int bytes_received_;
+
+  // |total_bytes_received_| keeps track of all the bytes read by the
+  // SpdySession. It is used by the |Net.SpdySettingsCwnd...| histograms.
+  int total_bytes_received_;
+
+  // |bytes_read_| keeps track of number of bytes read continously in the
+  // DoLoop() without yielding.
+  int bytes_read_;
+
   bool sent_settings_;      // Did this session send settings when it started.
   bool received_settings_;  // Did this session receive at least one settings
                             // frame.
   int stalled_streams_;     // Count of streams that were ever stalled.
 
   // Count of all pings on the wire, for which we have not gotten a response.
   int64 pings_in_flight_;
 
   // This is the next ping_id (unique_id) to be sent in PING frame.
   uint32 next_ping_id_;
@@ skipping 74 matching lines @@
   // This SPDY proxy is allowed to push resources from origins that are
   // different from those of their associated streams.
   HostPortPair trusted_spdy_proxy_;
 
   TimeFunc time_func_;
 };
 
 }  // namespace net
 
 #endif  // NET_SPDY_SPDY_SESSION_H_