Move googleurl into the Chrome repo.

url/url_parse.cc

Index: url/url_parse.cc
===================================================================
--- url/url_parse.cc	(revision 0)
+++ url/url_parse.cc	(revision 0)
@@ -0,0 +1,923 @@
+/* Based on nsURLParsers.cc from Mozilla
+ * -------------------------------------
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Darin Fisher (original author)
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "googleurl/src/url_parse.h"
+
+#include <stdlib.h>
+
+#include "base/logging.h"
+#include "googleurl/src/url_parse_internal.h"
+#include "googleurl/src/url_util.h"
+#include "googleurl/src/url_util_internal.h"
+
+namespace url_parse {
+
+namespace {
+
+// Returns true if the given character is a valid digit to use in a port.
+inline bool IsPortDigit(char16 ch) {
+  return ch >= '0' && ch <= '9';
+}
+
+// Returns the offset of the next authority terminator in the input starting
+// from start_offset. If no terminator is found, the return value will be equal
+// to spec_len.
+template<typename CHAR>
+int FindNextAuthorityTerminator(const CHAR* spec,
+                                int start_offset,
+                                int spec_len) {
+  for (int i = start_offset; i < spec_len; i++) {
+    if (IsAuthorityTerminator(spec[i]))
+      return i;
+  }
+  return spec_len;  // Not found.
+}
+
+template<typename CHAR>
+void ParseUserInfo(const CHAR* spec,
+                   const Component& user,
+                   Component* username,
+                   Component* password) {
+  // Find the first colon in the user section, which separates the username and
+  // password.
+  int colon_offset = 0;
+  while (colon_offset < user.len && spec[user.begin + colon_offset] != ':')
+    colon_offset++;
+
+  if (colon_offset < user.len) {
+    // Found separator: <username>:<password>
+    *username = Component(user.begin, colon_offset);
+    *password = MakeRange(user.begin + colon_offset + 1,
+                          user.begin + user.len);
+  } else {
+    // No separator, treat everything as the username
+    *username = user;
+    *password = Component();
+  }
+}
+
+template<typename CHAR>
+void ParseServerInfo(const CHAR* spec,
+                     const Component& serverinfo,
+                     Component* hostname,
+                     Component* port_num) {
+  if (serverinfo.len == 0) {
+    // No server info, host name is empty.
+    hostname->reset();
+    port_num->reset();
+    return;
+  }
+
+  // If the host starts with a left-bracket, assume the entire host is an
+  // IPv6 literal.  Otherwise, assume none of the host is an IPv6 literal.
+  // This assumption will be overridden if we find a right-bracket.
+  //
+  // Our IPv6 address canonicalization code requires both brackets to exist,
+  // but the ability to locate an incomplete address can still be useful.
+  int ipv6_terminator = spec[serverinfo.begin] == '[' ? serverinfo.end() : -1;
+  int colon = -1;
+
+  // Find the last right-bracket, and the last colon.
+  for (int i = serverinfo.begin; i < serverinfo.end(); i++) {
+    switch (spec[i]) {
+      case ']':
+        ipv6_terminator = i;
+        break;
+      case ':':
+        colon = i;
+        break;
+    }
+  }
+
+  if (colon > ipv6_terminator) {
+    // Found a port number: <hostname>:<port>
+    *hostname = MakeRange(serverinfo.begin, colon);
+    if (hostname->len == 0)
+      hostname->reset();
+    *port_num = MakeRange(colon + 1, serverinfo.end());
+  } else {
+    // No port: <hostname>
+    *hostname = serverinfo;
+    port_num->reset();
+  }
+}
+
+// Given an already-identified auth section, breaks it into its consituent
+// parts. The port number will be parsed and the resulting integer will be
+// filled into the given *port variable, or -1 if there is no port number or it
+// is invalid.
+template<typename CHAR>
+void DoParseAuthority(const CHAR* spec,
+                      const Component& auth,
+                      Component* username,
+                      Component* password,
+                      Component* hostname,
+                      Component* port_num) {
+  DCHECK(auth.is_valid()) << "We should always get an authority";
+  if (auth.len == 0) {
+    username->reset();
+    password->reset();
+    hostname->reset();
+    port_num->reset();
+    return;
+  }
+
+  // Search backwards for @, which is the separator between the user info and
+  // the server info.
+  int i = auth.begin + auth.len - 1;
+  while (i > auth.begin && spec[i] != '@')
+    i--;
+
+  if (spec[i] == '@') {
+    // Found user info: <user-info>@<server-info>
+    ParseUserInfo(spec, Component(auth.begin, i - auth.begin),
+                  username, password);
+    ParseServerInfo(spec, MakeRange(i + 1, auth.begin + auth.len),
+                    hostname, port_num);
+  } else {
+    // No user info, everything is server info.
+    username->reset();
+    password->reset();
+    ParseServerInfo(spec, auth, hostname, port_num);
+  }
+}
+
+template<typename CHAR>
+void ParsePath(const CHAR* spec,
+               const Component& path,
+               Component* filepath,
+               Component* query,
+               Component* ref) {
+  // path = [/]<segment1>/<segment2>/<...>/<segmentN>;<param>?<query>#<ref>
+
+  // Special case when there is no path.
+  if (path.len == -1) {
+    filepath->reset();
+    query->reset();
+    ref->reset();
+    return;
+  }
+  DCHECK(path.len > 0) << "We should never have 0 length paths";
+
+  // Search for first occurrence of either ? or #.
+  int path_end = path.begin + path.len;
+
+  int query_separator = -1;  // Index of the '?'
+  int ref_separator = -1;    // Index of the '#'
+  for (int i = path.begin; i < path_end; i++) {
+    switch (spec[i]) {
+      case '?':
+        // Only match the query string if it precedes the reference fragment
+        // and when we haven't found one already.
+        if (ref_separator < 0 && query_separator < 0)
+          query_separator = i;
+        break;
+      case '#':
+        // Record the first # sign only.
+        if (ref_separator < 0)
+          ref_separator = i;
+        break;
+    }
+  }
+
+  // Markers pointing to the character after each of these corresponding
+  // components. The code below words from the end back to the beginning,
+  // and will update these indices as it finds components that exist.
+  int file_end, query_end;
+
+  // Ref fragment: from the # to the end of the path.
+  if (ref_separator >= 0) {
+    file_end = query_end = ref_separator;
+    *ref = MakeRange(ref_separator + 1, path_end);
+  } else {
+    file_end = query_end = path_end;
+    ref->reset();
+  }
+
+  // Query fragment: everything from the ? to the next boundary (either the end
+  // of the path or the ref fragment).
+  if (query_separator >= 0) {
+    file_end = query_separator;
+    *query = MakeRange(query_separator + 1, query_end);
+  } else {
+    query->reset();
+  }
+
+  // File path: treat an empty file path as no file path.
+  if (file_end != path.begin)
+    *filepath = MakeRange(path.begin, file_end);
+  else
+    filepath->reset();
+}
+
+template<typename CHAR>
+bool DoExtractScheme(const CHAR* url,
+                     int url_len,
+                     Component* scheme) {
+  // Skip leading whitespace and control characters.
+  int begin = 0;
+  while (begin < url_len && ShouldTrimFromURL(url[begin]))
+    begin++;
+  if (begin == url_len)
+    return false;  // Input is empty or all whitespace.
+
+  // Find the first colon character.
+  for (int i = begin; i < url_len; i++) {
+    if (url[i] == ':') {
+      *scheme = MakeRange(begin, i);
+      return true;
+    }
+  }
+  return false;  // No colon found: no scheme
+}
+
+// Fills in all members of the Parsed structure except for the scheme.
+//
+// |spec| is the full spec being parsed, of length |spec_len|.
+// |after_scheme| is the character immediately following the scheme (after the
+//   colon) where we'll begin parsing.
+//
+// Compatability data points. I list "host", "path" extracted:
+// Input                IE6             Firefox                Us
+// -----                --------------  --------------         --------------
+// http://foo.com/      "foo.com", "/"  "foo.com", "/"         "foo.com", "/"
+// http:foo.com/        "foo.com", "/"  "foo.com", "/"         "foo.com", "/"
+// http:/foo.com/       fail(*)         "foo.com", "/"         "foo.com", "/"
+// http:\foo.com/       fail(*)         "\foo.com", "/"(fail)  "foo.com", "/"
+// http:////foo.com/    "foo.com", "/"  "foo.com", "/"         "foo.com", "/"
+//
+// (*) Interestingly, although IE fails to load these URLs, its history
+// canonicalizer handles them, meaning if you've been to the corresponding
+// "http://foo.com/" link, it will be colored.
+template <typename CHAR>
+void DoParseAfterScheme(const CHAR* spec,
+                        int spec_len,
+                        int after_scheme,
+                        Parsed* parsed) {
+  int num_slashes = CountConsecutiveSlashes(spec, after_scheme, spec_len);
+  int after_slashes = after_scheme + num_slashes;
+
+  // First split into two main parts, the authority (username, password, host,
+  // and port) and the full path (path, query, and reference).
+  Component authority;
+  Component full_path;
+
+  // Found "//<some data>", looks like an authority section. Treat everything
+  // from there to the next slash (or end of spec) to be the authority. Note
+  // that we ignore the number of slashes and treat it as the authority.
+  int end_auth = FindNextAuthorityTerminator(spec, after_slashes, spec_len);
+  authority = Component(after_slashes, end_auth - after_slashes);
+
+  if (end_auth == spec_len)  // No beginning of path found.
+    full_path = Component();
+  else  // Everything starting from the slash to the end is the path.
+    full_path = Component(end_auth, spec_len - end_auth);
+
+  // Now parse those two sub-parts.
+  DoParseAuthority(spec, authority, &parsed->username, &parsed->password,
+                   &parsed->host, &parsed->port);
+  ParsePath(spec, full_path, &parsed->path, &parsed->query, &parsed->ref);
+}
+
+// The main parsing function for standard URLs. Standard URLs have a scheme,
+// host, path, etc.
+template<typename CHAR>
+void DoParseStandardURL(const CHAR* spec, int spec_len, Parsed* parsed) {
+  DCHECK(spec_len >= 0);
+
+  // Strip leading & trailing spaces and control characters.
+  int begin = 0;
+  TrimURL(spec, &begin, &spec_len);
+
+  int after_scheme;
+  if (DoExtractScheme(spec, spec_len, &parsed->scheme)) {
+    after_scheme = parsed->scheme.end() + 1;  // Skip past the colon.
+  } else {
+    // Say there's no scheme when there is no colon. We could also say that
+    // everything is the scheme. Both would produce an invalid URL, but this way
+    // seems less wrong in more cases.
+    parsed->scheme.reset();
+    after_scheme = begin;
+  }
+  DoParseAfterScheme(spec, spec_len, after_scheme, parsed);
+}
+
+template<typename CHAR>
+void DoParseFileSystemURL(const CHAR* spec, int spec_len, Parsed* parsed) {
+  DCHECK(spec_len >= 0);
+
+  // Get the unused parts of the URL out of the way.
+  parsed->username.reset();
+  parsed->password.reset();
+  parsed->host.reset();
+  parsed->port.reset();
+  parsed->path.reset();   // May use this; reset for convenience.
+  parsed->ref.reset();    // May use this; reset for convenience.
+  parsed->query.reset();  // May use this; reset for convenience.
+  parsed->clear_inner_parsed();  // May use this; reset for convenience.
+
+  // Strip leading & trailing spaces and control characters.
+  int begin = 0;
+  TrimURL(spec, &begin, &spec_len);
+
+  // Handle empty specs or ones that contain only whitespace or control chars.
+  if (begin == spec_len) {
+    parsed->scheme.reset();
+    return;
+  }
+
+  int inner_start = -1;
+
+  // Extract the scheme.  We also handle the case where there is no scheme.
+  if (DoExtractScheme(&spec[begin], spec_len - begin, &parsed->scheme)) {
+    // Offset the results since we gave ExtractScheme a substring.
+    parsed->scheme.begin += begin;
+
+    if (parsed->scheme.end() == spec_len - 1)
+      return;
+
+    inner_start = parsed->scheme.end() + 1;
+  } else {
+    // No scheme found; that's not valid for filesystem URLs.
+    parsed->scheme.reset();
+    return;
+  }
+
+  url_parse::Component inner_scheme;
+  const CHAR* inner_spec = &spec[inner_start];
+  int inner_spec_len = spec_len - inner_start;
+
+  if (DoExtractScheme(inner_spec, inner_spec_len, &inner_scheme)) {
+    // Offset the results since we gave ExtractScheme a substring.
+    inner_scheme.begin += inner_start;
+
+    if (inner_scheme.end() == spec_len - 1)
+      return;
+  } else {
+    // No scheme found; that's not valid for filesystem URLs.
+    // The best we can do is return "filesystem://".
+    return;
+  }
+
+  Parsed inner_parsed;
+
+  if (url_util::CompareSchemeComponent(
+      spec, inner_scheme, url_util::kFileScheme)) {
+    // File URLs are special.
+    ParseFileURL(inner_spec, inner_spec_len, &inner_parsed);
+  } else if (url_util::CompareSchemeComponent(spec, inner_scheme,
+      url_util::kFileSystemScheme)) {
+    // Filesystem URLs don't nest.
+    return;
+  } else if (url_util::IsStandard(spec, inner_scheme)) {
+    // All "normal" URLs.
+    DoParseStandardURL(inner_spec, inner_spec_len, &inner_parsed);
+  } else {
+    return;
+  }
+
+  // All members of inner_parsed need to be offset by inner_start.
+  // If we had any scheme that supported nesting more than one level deep,
+  // we'd have to recurse into the inner_parsed's inner_parsed when
+  // adjusting by inner_start.
+  inner_parsed.scheme.begin += inner_start;
+  inner_parsed.username.begin += inner_start;
+  inner_parsed.password.begin += inner_start;
+  inner_parsed.host.begin += inner_start;
+  inner_parsed.port.begin += inner_start;
+  inner_parsed.query.begin += inner_start;
+  inner_parsed.ref.begin += inner_start;
+  inner_parsed.path.begin += inner_start;
+
+  // Query and ref move from inner_parsed to parsed.
+  parsed->query = inner_parsed.query;
+  inner_parsed.query.reset();
+  parsed->ref = inner_parsed.ref;
+  inner_parsed.ref.reset();
+
+  parsed->set_inner_parsed(inner_parsed);
+  if (!inner_parsed.scheme.is_valid() || !inner_parsed.path.is_valid() ||
+      inner_parsed.inner_parsed()) {
+    return;
+  }
+
+  // The path in inner_parsed should start with a slash, then have a filesystem
+  // type followed by a slash.  From the first slash up to but excluding the
+  // second should be what it keeps; the rest goes to parsed.  If the path ends
+  // before the second slash, it's still pretty clear what the user meant, so
+  // we'll let that through.
+  if (!IsURLSlash(spec[inner_parsed.path.begin])) {
+    return;
+  }
+  int inner_path_end = inner_parsed.path.begin + 1;  // skip the leading slash
+  while (inner_path_end < spec_len &&
+      !IsURLSlash(spec[inner_path_end]))
+    ++inner_path_end;
+  parsed->path.begin = inner_path_end;
+  int new_inner_path_length = inner_path_end - inner_parsed.path.begin;
+  parsed->path.len = inner_parsed.path.len - new_inner_path_length;
+  parsed->inner_parsed()->path.len = new_inner_path_length;
+}
+
+// Initializes a path URL which is merely a scheme followed by a path. Examples
+// include "about:foo" and "javascript:alert('bar');"
+template<typename CHAR>
+void DoParsePathURL(const CHAR* spec, int spec_len, Parsed* parsed) {
+  // Get the non-path and non-scheme parts of the URL out of the way, we never
+  // use them.
+  parsed->username.reset();
+  parsed->password.reset();
+  parsed->host.reset();
+  parsed->port.reset();
+  parsed->query.reset();
+  parsed->ref.reset();
+
+  // Strip leading & trailing spaces and control characters.
+  int begin = 0;
+  TrimURL(spec, &begin, &spec_len);
+
+  // Handle empty specs or ones that contain only whitespace or control chars.
+  if (begin == spec_len) {
+    parsed->scheme.reset();
+    parsed->path.reset();
+    return;
+  }
+
+  // Extract the scheme, with the path being everything following. We also
+  // handle the case where there is no scheme.
+  if (ExtractScheme(&spec[begin], spec_len - begin, &parsed->scheme)) {
+    // Offset the results since we gave ExtractScheme a substring.
+    parsed->scheme.begin += begin;
+
+    // For compatability with the standard URL parser, we treat no path as
+    // -1, rather than having a length of 0 (we normally wouldn't care so
+    // much for these non-standard URLs).
+    if (parsed->scheme.end() == spec_len - 1)
+      parsed->path.reset();
+    else
+      parsed->path = MakeRange(parsed->scheme.end() + 1, spec_len);
+  } else {
+    // No scheme found, just path.
+    parsed->scheme.reset();
+    parsed->path = MakeRange(begin, spec_len);
+  }
+}
+
+template<typename CHAR>
+void DoParseMailtoURL(const CHAR* spec, int spec_len, Parsed* parsed) {
+  DCHECK(spec_len >= 0);
+
+  // Get the non-path and non-scheme parts of the URL out of the way, we never
+  // use them.
+  parsed->username.reset();
+  parsed->password.reset();
+  parsed->host.reset();
+  parsed->port.reset();
+  parsed->ref.reset();
+  parsed->query.reset();  // May use this; reset for convenience.
+
+  // Strip leading & trailing spaces and control characters.
+  int begin = 0;
+  TrimURL(spec, &begin, &spec_len);
+
+  // Handle empty specs or ones that contain only whitespace or control chars.
+  if (begin == spec_len) {
+    parsed->scheme.reset();
+    parsed->path.reset();
+    return;
+  }
+
+  int path_begin = -1;
+  int path_end = -1;
+
+  // Extract the scheme, with the path being everything following. We also
+  // handle the case where there is no scheme.
+  if (ExtractScheme(&spec[begin], spec_len - begin, &parsed->scheme)) {
+    // Offset the results since we gave ExtractScheme a substring.
+    parsed->scheme.begin += begin;
+
+    if (parsed->scheme.end() != spec_len - 1) {
+      path_begin = parsed->scheme.end() + 1;
+      path_end = spec_len;
+    }
+  } else {
+    // No scheme found, just path.
+    parsed->scheme.reset();
+    path_begin = begin;
+    path_end = spec_len;
+  }
+
+  // Split [path_begin, path_end) into a path + query.
+  for (int i = path_begin; i < path_end; ++i) {
+    if (spec[i] == '?') {
+      parsed->query = MakeRange(i + 1, path_end);
+      path_end = i;
+      break;
+    }
+  }
+
+  // For compatability with the standard URL parser, treat no path as
+  // -1, rather than having a length of 0
+  if (path_begin == path_end) {
+    parsed->path.reset();
+  } else {
+    parsed->path = MakeRange(path_begin, path_end);
+  }
+}
+
+// Converts a port number in a string to an integer. We'd like to just call
+// sscanf but our input is not NULL-terminated, which sscanf requires. Instead,
+// we copy the digits to a small stack buffer (since we know the maximum number
+// of digits in a valid port number) that we can NULL terminate.
+template<typename CHAR>
+int DoParsePort(const CHAR* spec, const Component& component) {
+  // Easy success case when there is no port.
+  const int kMaxDigits = 5;
+  if (!component.is_nonempty())
+    return PORT_UNSPECIFIED;
+
+  // Skip over any leading 0s.
+  Component digits_comp(component.end(), 0);
+  for (int i = 0; i < component.len; i++) {
+    if (spec[component.begin + i] != '0') {
+      digits_comp = MakeRange(component.begin + i, component.end());
+      break;
+    }
+  }
+  if (digits_comp.len == 0)
+    return 0;  // All digits were 0.
+
+  // Verify we don't have too many digits (we'll be copying to our buffer so
+  // we need to double-check).
+  if (digits_comp.len > kMaxDigits)
+    return PORT_INVALID;
+
+  // Copy valid digits to the buffer.
+  char digits[kMaxDigits + 1];  // +1 for null terminator
+  for (int i = 0; i < digits_comp.len; i++) {
+    CHAR ch = spec[digits_comp.begin + i];
+    if (!IsPortDigit(ch)) {
+      // Invalid port digit, fail.
+      return PORT_INVALID;
+    }
+    digits[i] = static_cast<char>(ch);
+  }
+
+  // Null-terminate the string and convert to integer. Since we guarantee
+  // only digits, atoi's lack of error handling is OK.
+  digits[digits_comp.len] = 0;
+  int port = atoi(digits);
+  if (port > 65535)
+    return PORT_INVALID;  // Out of range.
+  return port;
+}
+
+template<typename CHAR>
+void DoExtractFileName(const CHAR* spec,
+                       const Component& path,
+                       Component* file_name) {
+  // Handle empty paths: they have no file names.
+  if (!path.is_nonempty()) {
+    file_name->reset();
+    return;
+  }
+
+  // Search backwards for a parameter, which is a normally unused field in a
+  // URL delimited by a semicolon. We parse the parameter as part of the
+  // path, but here, we don't want to count it. The last semicolon is the
+  // parameter. The path should start with a slash, so we don't need to check
+  // the first one.
+  int file_end = path.end();
+  for (int i = path.end() - 1; i > path.begin; i--) {
+    if (spec[i] == ';') {
+      file_end = i;
+      break;
+    }
+  }
+
+  // Now search backwards from the filename end to the previous slash
+  // to find the beginning of the filename.
+  for (int i = file_end - 1; i >= path.begin; i--) {
+    if (IsURLSlash(spec[i])) {
+      // File name is everything following this character to the end
+      *file_name = MakeRange(i + 1, file_end);
+      return;
+    }
+  }
+
+  // No slash found, this means the input was degenerate (generally paths
+  // will start with a slash). Let's call everything the file name.
+  *file_name = MakeRange(path.begin, file_end);
+  return;
+}
+
+template<typename CHAR>
+bool DoExtractQueryKeyValue(const CHAR* spec,
+                            Component* query,
+                            Component* key,
+                            Component* value) {
+  if (!query->is_nonempty())
+    return false;
+
+  int start = query->begin;
+  int cur = start;
+  int end = query->end();
+
+  // We assume the beginning of the input is the beginning of the "key" and we
+  // skip to the end of it.
+  key->begin = cur;
+  while (cur < end && spec[cur] != '&' && spec[cur] != '=')
+    cur++;
+  key->len = cur - key->begin;
+
+  // Skip the separator after the key (if any).
+  if (cur < end && spec[cur] == '=')
+    cur++;
+
+  // Find the value part.
+  value->begin = cur;
+  while (cur < end && spec[cur] != '&')
+    cur++;
+  value->len = cur - value->begin;
+
+  // Finally skip the next separator if any
+  if (cur < end && spec[cur] == '&')
+    cur++;
+
+  // Save the new query
+  *query = url_parse::MakeRange(cur, end);
+  return true;
+}
+
+}  // namespace
+
+Parsed::Parsed() : inner_parsed_(NULL) {
+}
+
+Parsed::Parsed(const Parsed& other) :
+    scheme(other.scheme),
+    username(other.username),
+    password(other.password),
+    host(other.host),
+    port(other.port),
+    path(other.path),
+    query(other.query),
+    ref(other.ref),
+    inner_parsed_(NULL) {
+  if (other.inner_parsed_)
+    set_inner_parsed(*other.inner_parsed_);
+}
+
+Parsed& Parsed::operator=(const Parsed& other) {
+  if (this != &other) {
+    scheme = other.scheme;
+    username = other.username;
+    password = other.password;
+    host = other.host;
+    port = other.port;
+    path = other.path;
+    query = other.query;
+    ref = other.ref;
+    if (other.inner_parsed_)
+      set_inner_parsed(*other.inner_parsed_);
+    else
+      clear_inner_parsed();
+  }
+  return *this;
+}
+
+Parsed::~Parsed() {
+  delete inner_parsed_;
+}
+
+int Parsed::Length() const {
+  if (ref.is_valid())
+    return ref.end();
+  return CountCharactersBefore(REF, false);
+}
+
+int Parsed::CountCharactersBefore(ComponentType type,
+                                  bool include_delimiter) const {
+  if (type == SCHEME)
+    return scheme.begin;
+
+  // There will be some characters after the scheme like "://" and we don't
+  // know how many. Search forwards for the next thing until we find one.
+  int cur = 0;
+  if (scheme.is_valid())
+    cur = scheme.end() + 1;  // Advance over the ':' at the end of the scheme.
+
+  if (username.is_valid()) {
+    if (type <= USERNAME)
+      return username.begin;
+    cur = username.end() + 1;  // Advance over the '@' or ':' at the end.
+  }
+
+  if (password.is_valid()) {
+    if (type <= PASSWORD)
+      return password.begin;
+    cur = password.end() + 1;  // Advance over the '@' at the end.
+  }
+
+  if (host.is_valid()) {
+    if (type <= HOST)
+      return host.begin;
+    cur = host.end();
+  }
+
+  if (port.is_valid()) {
+    if (type < PORT || (type == PORT && include_delimiter))
+      return port.begin - 1;  // Back over delimiter.
+    if (type == PORT)
+      return port.begin;  // Don't want delimiter counted.
+    cur = port.end();
+  }
+
+  if (path.is_valid()) {
+    if (type <= PATH)
+      return path.begin;
+    cur = path.end();
+  }
+
+  if (query.is_valid()) {
+    if (type < QUERY || (type == QUERY && include_delimiter))
+      return query.begin - 1;  // Back over delimiter.
+    if (type == QUERY)
+      return query.begin;  // Don't want delimiter counted.
+    cur = query.end();
+  }
+
+  if (ref.is_valid()) {
+    if (type == REF && !include_delimiter)
+      return ref.begin;  // Back over delimiter.
+
+    // When there is a ref and we get here, the component we wanted was before
+    // this and not found, so we always know the beginning of the ref is right.
+    return ref.begin - 1;  // Don't want delimiter counted.
+  }
+
+  return cur;
+}
+
+bool ExtractScheme(const char* url, int url_len, Component* scheme) {
+  return DoExtractScheme(url, url_len, scheme);
+}
+
+bool ExtractScheme(const char16* url, int url_len, Component* scheme) {
+  return DoExtractScheme(url, url_len, scheme);
+}
+
+// This handles everything that may be an authority terminator, including
+// backslash. For special backslash handling see DoParseAfterScheme.
+bool IsAuthorityTerminator(char16 ch) {
+  return IsURLSlash(ch) || ch == '?' || ch == '#';
+}
+
+void ExtractFileName(const char* url,
+                     const Component& path,
+                     Component* file_name) {
+  DoExtractFileName(url, path, file_name);
+}
+
+void ExtractFileName(const char16* url,
+                     const Component& path,
+                     Component* file_name) {
+  DoExtractFileName(url, path, file_name);
+}
+
+bool ExtractQueryKeyValue(const char* url,
+                          Component* query,
+                          Component* key,
+                          Component* value) {
+  return DoExtractQueryKeyValue(url, query, key, value);
+}
+
+bool ExtractQueryKeyValue(const char16* url,
+                          Component* query,
+                          Component* key,
+                          Component* value) {
+  return DoExtractQueryKeyValue(url, query, key, value);
+}
+
+void ParseAuthority(const char* spec,
+                    const Component& auth,
+                    Component* username,
+                    Component* password,
+                    Component* hostname,
+                    Component* port_num) {
+  DoParseAuthority(spec, auth, username, password, hostname, port_num);
+}
+
+void ParseAuthority(const char16* spec,
+                    const Component& auth,
+                    Component* username,
+                    Component* password,
+                    Component* hostname,
+                    Component* port_num) {
+  DoParseAuthority(spec, auth, username, password, hostname, port_num);
+}
+
+int ParsePort(const char* url, const Component& port) {
+  return DoParsePort(url, port);
+}
+
+int ParsePort(const char16* url, const Component& port) {
+  return DoParsePort(url, port);
+}
+
+void ParseStandardURL(const char* url, int url_len, Parsed* parsed) {
+  DoParseStandardURL(url, url_len, parsed);
+}
+
+void ParseStandardURL(const char16* url, int url_len, Parsed* parsed) {
+  DoParseStandardURL(url, url_len, parsed);
+}
+
+void ParsePathURL(const char* url, int url_len, Parsed* parsed) {
+  DoParsePathURL(url, url_len, parsed);
+}
+
+void ParsePathURL(const char16* url, int url_len, Parsed* parsed) {
+  DoParsePathURL(url, url_len, parsed);
+}
+
+void ParseFileSystemURL(const char* url, int url_len, Parsed* parsed) {
+  DoParseFileSystemURL(url, url_len, parsed);
+}
+
+void ParseFileSystemURL(const char16* url, int url_len, Parsed* parsed) {
+  DoParseFileSystemURL(url, url_len, parsed);
+}
+
+void ParseMailtoURL(const char* url, int url_len, Parsed* parsed) {
+  DoParseMailtoURL(url, url_len, parsed);
+}
+
+void ParseMailtoURL(const char16* url, int url_len, Parsed* parsed) {
+  DoParseMailtoURL(url, url_len, parsed);
+}
+
+void ParsePathInternal(const char* spec,
+                       const Component& path,
+                       Component* filepath,
+                       Component* query,
+                       Component* ref) {
+  ParsePath(spec, path, filepath, query, ref);
+}
+
+void ParsePathInternal(const char16* spec,
+                       const Component& path,
+                       Component* filepath,
+                       Component* query,
+                       Component* ref) {
+  ParsePath(spec, path, filepath, query, ref);
+}
+
+void ParseAfterScheme(const char* spec,
+                      int spec_len,
+                      int after_scheme,
+                      Parsed* parsed) {
+  DoParseAfterScheme(spec, spec_len, after_scheme, parsed);
+}
+
+void ParseAfterScheme(const char16* spec,
+                      int spec_len,
+                      int after_scheme,
+                      Parsed* parsed) {
+  DoParseAfterScheme(spec, spec_len, after_scheme, parsed);
+}
+
+}  // namespace url_parse
Property changes on: url/url_parse.cc
___________________________________________________________________
Added: svn:eol-style
   + LF