[catapult] - Copy Telemetry's gsutilz over to third_party.

third_party/gsutil/third_party/boto/boto/glacier/layer1.py

Index: third_party/gsutil/third_party/boto/boto/glacier/layer1.py
diff --git a/third_party/gsutil/third_party/boto/boto/glacier/layer1.py b/third_party/gsutil/third_party/boto/boto/glacier/layer1.py
new file mode 100644
index 0000000000000000000000000000000000000000..39136cf03fce67eef51c924f38107474d0835088
--- /dev/null
+++ b/third_party/gsutil/third_party/boto/boto/glacier/layer1.py
@@ -0,0 +1,1279 @@
+# -*- coding: utf-8 -*-
+# Copyright (c) 2012 Mitch Garnaat http://garnaat.org/
+# Copyright (c) 2012 Amazon.com, Inc. or its affiliates.  All Rights Reserved
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish, dis-
+# tribute, sublicense, and/or sell copies of the Software, and to permit
+# persons to whom the Software is furnished to do so, subject to the fol-
+# lowing conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL-
+# ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+# SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+# IN THE SOFTWARE.
+#
+
+import os
+
+import boto.glacier
+from boto.compat import json
+from boto.connection import AWSAuthConnection
+from boto.glacier.exceptions import UnexpectedHTTPResponseError
+from boto.glacier.response import GlacierResponse
+from boto.glacier.utils import ResettingFileSender
+
+
+class Layer1(AWSAuthConnection):
+    """
+    Amazon Glacier is a storage solution for "cold data."
+
+    Amazon Glacier is an extremely low-cost storage service that
+    provides secure, durable and easy-to-use storage for data backup
+    and archival. With Amazon Glacier, customers can store their data
+    cost effectively for months, years, or decades. Amazon Glacier
+    also enables customers to offload the administrative burdens of
+    operating and scaling storage to AWS, so they don't have to worry
+    about capacity planning, hardware provisioning, data replication,
+    hardware failure and recovery, or time-consuming hardware
+    migrations.
+
+    Amazon Glacier is a great storage choice when low storage cost is
+    paramount, your data is rarely retrieved, and retrieval latency of
+    several hours is acceptable. If your application requires fast or
+    frequent access to your data, consider using Amazon S3. For more
+    information, go to `Amazon Simple Storage Service (Amazon S3)`_.
+
+    You can store any kind of data in any format. There is no maximum
+    limit on the total amount of data you can store in Amazon Glacier.
+
+    If you are a first-time user of Amazon Glacier, we recommend that
+    you begin by reading the following sections in the Amazon Glacier
+    Developer Guide :
+
+
+    + `What is Amazon Glacier`_ - This section of the Developer Guide
+      describes the underlying data model, the operations it supports,
+      and the AWS SDKs that you can use to interact with the service.
+    + `Getting Started with Amazon Glacier`_ - The Getting Started
+      section walks you through the process of creating a vault,
+      uploading archives, creating jobs to download archives, retrieving
+      the job output, and deleting archives.
+      """
+    Version = '2012-06-01'
+
+    def __init__(self, aws_access_key_id=None, aws_secret_access_key=None,
+                 account_id='-', is_secure=True, port=None,
+                 proxy=None, proxy_port=None,
+                 proxy_user=None, proxy_pass=None, debug=0,
+                 https_connection_factory=None, path='/',
+                 provider='aws', security_token=None,
+                 suppress_consec_slashes=True,
+                 region=None, region_name='us-east-1',
+                 profile_name=None):
+
+        if not region:
+            for reg in boto.glacier.regions():
+                if reg.name == region_name:
+                    region = reg
+                    break
+
+        self.region = region
+        self.account_id = account_id
+        super(Layer1, self).__init__(region.endpoint,
+                                     aws_access_key_id, aws_secret_access_key,
+                                     is_secure, port, proxy, proxy_port,
+                                     proxy_user, proxy_pass, debug,
+                                     https_connection_factory,
+                                     path, provider, security_token,
+                                     suppress_consec_slashes,
+                                     profile_name=profile_name)
+
+    def _required_auth_capability(self):
+        return ['hmac-v4']
+
+    def make_request(self, verb, resource, headers=None,
+                     data='', ok_responses=(200,), params=None,
+                     sender=None, response_headers=None):
+        if headers is None:
+            headers = {}
+        headers['x-amz-glacier-version'] = self.Version
+        uri = '/%s/%s' % (self.account_id, resource)
+        response = super(Layer1, self).make_request(verb, uri,
+                                                    params=params,
+                                                    headers=headers,
+                                                    sender=sender,
+                                                    data=data)
+        if response.status in ok_responses:
+            return GlacierResponse(response, response_headers)
+        else:
+            # create glacier-specific exceptions
+            raise UnexpectedHTTPResponseError(ok_responses, response)
+
+    # Vaults
+
+    def list_vaults(self, limit=None, marker=None):
+        """
+        This operation lists all vaults owned by the calling user's
+        account. The list returned in the response is ASCII-sorted by
+        vault name.
+
+        By default, this operation returns up to 1,000 items. If there
+        are more vaults to list, the response `marker` field contains
+        the vault Amazon Resource Name (ARN) at which to continue the
+        list with a new List Vaults request; otherwise, the `marker`
+        field is `null`. To return a list of vaults that begins at a
+        specific vault, set the `marker` request parameter to the
+        vault ARN you obtained from a previous List Vaults request.
+        You can also limit the number of vaults returned in the
+        response by specifying the `limit` parameter in the request.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Retrieving Vault Metadata in Amazon Glacier`_ and `List
+        Vaults `_ in the Amazon Glacier Developer Guide .
+
+        :type marker: string
+        :param marker: A string used for pagination. The marker specifies the
+            vault ARN after which the listing of vaults should begin.
+
+        :type limit: string
+        :param limit: The maximum number of items returned in the response. If
+            you don't specify a value, the List Vaults operation returns up to
+            1,000 items.
+        """
+        params = {}
+        if limit:
+            params['limit'] = limit
+        if marker:
+            params['marker'] = marker
+        return self.make_request('GET', 'vaults', params=params)
+
+    def describe_vault(self, vault_name):
+        """
+        This operation returns information about a vault, including
+        the vault's Amazon Resource Name (ARN), the date the vault was
+        created, the number of archives it contains, and the total
+        size of all the archives in the vault. The number of archives
+        and their total size are as of the last inventory generation.
+        This means that if you add or remove an archive from a vault,
+        and then immediately use Describe Vault, the change in
+        contents will not be immediately reflected. If you want to
+        retrieve the latest inventory of the vault, use InitiateJob.
+        Amazon Glacier generates vault inventories approximately
+        daily. For more information, see `Downloading a Vault
+        Inventory in Amazon Glacier`_.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Retrieving Vault Metadata in Amazon Glacier`_ and `Describe
+        Vault `_ in the Amazon Glacier Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+        """
+        uri = 'vaults/%s' % vault_name
+        return self.make_request('GET', uri)
+
+    def create_vault(self, vault_name):
+        """
+        This operation creates a new vault with the specified name.
+        The name of the vault must be unique within a region for an
+        AWS account. You can create up to 1,000 vaults per account. If
+        you need to create more vaults, contact Amazon Glacier.
+
+        You must use the following guidelines when naming a vault.
+
+
+
+        + Names can be between 1 and 255 characters long.
+        + Allowed characters are a-z, A-Z, 0-9, '_' (underscore), '-'
+          (hyphen), and '.' (period).
+
+
+
+        This operation is idempotent.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Creating a Vault in Amazon Glacier`_ and `Create Vault `_ in
+        the Amazon Glacier Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+        """
+        uri = 'vaults/%s' % vault_name
+        return self.make_request('PUT', uri, ok_responses=(201,),
+                                 response_headers=[('Location', 'Location')])
+
+    def delete_vault(self, vault_name):
+        """
+        This operation deletes a vault. Amazon Glacier will delete a
+        vault only if there are no archives in the vault as of the
+        last inventory and there have been no writes to the vault
+        since the last inventory. If either of these conditions is not
+        satisfied, the vault deletion fails (that is, the vault is not
+        removed) and Amazon Glacier returns an error. You can use
+        DescribeVault to return the number of archives in a vault, and
+        you can use `Initiate a Job (POST jobs)`_ to initiate a new
+        inventory retrieval for a vault. The inventory contains the
+        archive IDs you use to delete archives using `Delete Archive
+        (DELETE archive)`_.
+
+        This operation is idempotent.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Deleting a Vault in Amazon Glacier`_ and `Delete Vault `_ in
+        the Amazon Glacier Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+        """
+        uri = 'vaults/%s' % vault_name
+        return self.make_request('DELETE', uri, ok_responses=(204,))
+
+    def get_vault_notifications(self, vault_name):
+        """
+        This operation retrieves the `notification-configuration`
+        subresource of the specified vault.
+
+        For information about setting a notification configuration on
+        a vault, see SetVaultNotifications. If a notification
+        configuration for a vault is not set, the operation returns a
+        `404 Not Found` error. For more information about vault
+        notifications, see `Configuring Vault Notifications in Amazon
+        Glacier`_.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Configuring Vault Notifications in Amazon Glacier`_ and `Get
+        Vault Notification Configuration `_ in the Amazon Glacier
+        Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+        """
+        uri = 'vaults/%s/notification-configuration' % vault_name
+        return self.make_request('GET', uri)
+
+    def set_vault_notifications(self, vault_name, notification_config):
+        """
+        This operation configures notifications that will be sent when
+        specific events happen to a vault. By default, you don't get
+        any notifications.
+
+        To configure vault notifications, send a PUT request to the
+        `notification-configuration` subresource of the vault. The
+        request should include a JSON document that provides an Amazon
+        SNS topic and specific events for which you want Amazon
+        Glacier to send notifications to the topic.
+
+        Amazon SNS topics must grant permission to the vault to be
+        allowed to publish notifications to the topic. You can
+        configure a vault to publish a notification for the following
+        vault events:
+
+
+        + **ArchiveRetrievalCompleted** This event occurs when a job
+          that was initiated for an archive retrieval is completed
+          (InitiateJob). The status of the completed job can be
+          "Succeeded" or "Failed". The notification sent to the SNS
+          topic is the same output as returned from DescribeJob.
+        + **InventoryRetrievalCompleted** This event occurs when a job
+          that was initiated for an inventory retrieval is completed
+          (InitiateJob). The status of the completed job can be
+          "Succeeded" or "Failed". The notification sent to the SNS
+          topic is the same output as returned from DescribeJob.
+
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Configuring Vault Notifications in Amazon Glacier`_ and `Set
+        Vault Notification Configuration `_ in the Amazon Glacier
+        Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type vault_notification_config: dict
+        :param vault_notification_config: Provides options for specifying
+            notification configuration.
+
+            The format of the dictionary is:
+
+                {'SNSTopic': 'mytopic',
+                 'Events': [event1,...]}
+        """
+        uri = 'vaults/%s/notification-configuration' % vault_name
+        json_config = json.dumps(notification_config)
+        return self.make_request('PUT', uri, data=json_config,
+                                 ok_responses=(204,))
+
+    def delete_vault_notifications(self, vault_name):
+        """
+        This operation deletes the notification configuration set for
+        a vault. The operation is eventually consistent;that is, it
+        might take some time for Amazon Glacier to completely disable
+        the notifications and you might still receive some
+        notifications for a short time after you send the delete
+        request.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Configuring Vault Notifications in Amazon Glacier`_ and
+        `Delete Vault Notification Configuration `_ in the Amazon
+        Glacier Developer Guide.
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+        """
+        uri = 'vaults/%s/notification-configuration' % vault_name
+        return self.make_request('DELETE', uri, ok_responses=(204,))
+
+    # Jobs
+
+    def list_jobs(self, vault_name, completed=None, status_code=None,
+                  limit=None, marker=None):
+        """
+        This operation lists jobs for a vault, including jobs that are
+        in-progress and jobs that have recently finished.
+
+
+        Amazon Glacier retains recently completed jobs for a period
+        before deleting them; however, it eventually removes completed
+        jobs. The output of completed jobs can be retrieved. Retaining
+        completed jobs for a period of time after they have completed
+        enables you to get a job output in the event you miss the job
+        completion notification or your first attempt to download it
+        fails. For example, suppose you start an archive retrieval job
+        to download an archive. After the job completes, you start to
+        download the archive but encounter a network error. In this
+        scenario, you can retry and download the archive while the job
+        exists.
+
+
+        To retrieve an archive or retrieve a vault inventory from
+        Amazon Glacier, you first initiate a job, and after the job
+        completes, you download the data. For an archive retrieval,
+        the output is the archive data, and for an inventory
+        retrieval, it is the inventory list. The List Job operation
+        returns a list of these jobs sorted by job initiation time.
+
+        This List Jobs operation supports pagination. By default, this
+        operation returns up to 1,000 jobs in the response. You should
+        always check the response for a `marker` at which to continue
+        the list; if there are no more items the `marker` is `null`.
+        To return a list of jobs that begins at a specific job, set
+        the `marker` request parameter to the value you obtained from
+        a previous List Jobs request. You can also limit the number of
+        jobs returned in the response by specifying the `limit`
+        parameter in the request.
+
+        Additionally, you can filter the jobs list returned by
+        specifying an optional `statuscode` (InProgress, Succeeded, or
+        Failed) and `completed` (true, false) parameter. The
+        `statuscode` allows you to specify that only jobs that match a
+        specified status are returned. The `completed` parameter
+        allows you to specify that only jobs in a specific completion
+        state are returned.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For the underlying REST API, go to `List Jobs `_
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type limit: string
+        :param limit: Specifies that the response be limited to the specified
+            number of items or fewer. If not specified, the List Jobs operation
+            returns up to 1,000 jobs.
+
+        :type marker: string
+        :param marker: An opaque string used for pagination. This value
+            specifies the job at which the listing of jobs should begin. Get
+            the marker value from a previous List Jobs response. You need only
+            include the marker if you are continuing the pagination of results
+            started in a previous List Jobs request.
+
+        :type statuscode: string
+        :param statuscode: Specifies the type of job status to return. You can
+            specify the following values: "InProgress", "Succeeded", or
+            "Failed".
+
+        :type completed: string
+        :param completed: Specifies the state of the jobs to return. You can
+            specify `True` or `False`.
+
+        """
+        params = {}
+        if limit:
+            params['limit'] = limit
+        if marker:
+            params['marker'] = marker
+        if status_code:
+            params['statuscode'] = status_code
+        if completed is not None:
+            params['completed'] = 'true' if completed else 'false'
+        uri = 'vaults/%s/jobs' % vault_name
+        return self.make_request('GET', uri, params=params)
+
+    def describe_job(self, vault_name, job_id):
+        """
+        This operation returns information about a job you previously
+        initiated, including the job initiation date, the user who
+        initiated the job, the job status code/message and the Amazon
+        SNS topic to notify after Amazon Glacier completes the job.
+        For more information about initiating a job, see InitiateJob.
+
+
+        This operation enables you to check the status of your job.
+        However, it is strongly recommended that you set up an Amazon
+        SNS topic and specify it in your initiate job request so that
+        Amazon Glacier can notify the topic after it completes the
+        job.
+
+
+        A job ID will not expire for at least 24 hours after Amazon
+        Glacier completes the job.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For information about the underlying REST API, go to `Working
+        with Archives in Amazon Glacier`_ in the Amazon Glacier
+        Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type job_id: string
+        :param job_id: The ID of the job to describe.
+        """
+        uri = 'vaults/%s/jobs/%s' % (vault_name, job_id)
+        return self.make_request('GET', uri, ok_responses=(200,))
+
+    def initiate_job(self, vault_name, job_data):
+        """
+        This operation initiates a job of the specified type. In this
+        release, you can initiate a job to retrieve either an archive
+        or a vault inventory (a list of archives in a vault).
+
+        Retrieving data from Amazon Glacier is a two-step process:
+
+
+        #. Initiate a retrieval job.
+        #. After the job completes, download the bytes.
+
+
+        The retrieval request is executed asynchronously. When you
+        initiate a retrieval job, Amazon Glacier creates a job and
+        returns a job ID in the response. When Amazon Glacier
+        completes the job, you can get the job output (archive or
+        inventory data). For information about getting job output, see
+        GetJobOutput operation.
+
+        The job must complete before you can get its output. To
+        determine when a job is complete, you have the following
+        options:
+
+
+        + **Use Amazon SNS Notification** You can specify an Amazon
+          Simple Notification Service (Amazon SNS) topic to which Amazon
+          Glacier can post a notification after the job is completed.
+          You can specify an SNS topic per job request. The notification
+          is sent only after Amazon Glacier completes the job. In
+          addition to specifying an SNS topic per job request, you can
+          configure vault notifications for a vault so that job
+          notifications are always sent. For more information, see
+          SetVaultNotifications.
+        + **Get job details** You can make a DescribeJob request to
+          obtain job status information while a job is in progress.
+          However, it is more efficient to use an Amazon SNS
+          notification to determine when a job is complete.
+
+
+
+        The information you get via notification is same that you get
+        by calling DescribeJob.
+
+
+        If for a specific event, you add both the notification
+        configuration on the vault and also specify an SNS topic in
+        your initiate job request, Amazon Glacier sends both
+        notifications. For more information, see
+        SetVaultNotifications.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        **About the Vault Inventory**
+
+        Amazon Glacier prepares an inventory for each vault
+        periodically, every 24 hours. When you initiate a job for a
+        vault inventory, Amazon Glacier returns the last inventory for
+        the vault. The inventory data you get might be up to a day or
+        two days old. Also, the initiate inventory job might take some
+        time to complete before you can download the vault inventory.
+        So you do not want to retrieve a vault inventory for each
+        vault operation. However, in some scenarios, you might find
+        the vault inventory useful. For example, when you upload an
+        archive, you can provide an archive description but not an
+        archive name. Amazon Glacier provides you a unique archive ID,
+        an opaque string of characters. So, you might maintain your
+        own database that maps archive names to their corresponding
+        Amazon Glacier assigned archive IDs. You might find the vault
+        inventory useful in the event you need to reconcile
+        information in your database with the actual vault inventory.
+
+        **About Ranged Archive Retrieval**
+
+        You can initiate an archive retrieval for the whole archive or
+        a range of the archive. In the case of ranged archive
+        retrieval, you specify a byte range to return or the whole
+        archive. The range specified must be megabyte (MB) aligned,
+        that is the range start value must be divisible by 1 MB and
+        range end value plus 1 must be divisible by 1 MB or equal the
+        end of the archive. If the ranged archive retrieval is not
+        megabyte aligned, this operation returns a 400 response.
+        Furthermore, to ensure you get checksum values for data you
+        download using Get Job Output API, the range must be tree hash
+        aligned.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and the underlying REST API, go to
+        `Initiate a Job`_ and `Downloading a Vault Inventory`_
+
+        :type account_id: string
+        :param account_id: The `AccountId` is the AWS Account ID. You can
+            specify either the AWS Account ID or optionally a '-', in which
+            case Amazon Glacier uses the AWS Account ID associated with the
+            credentials used to sign the request. If you specify your Account
+            ID, do not include hyphens in it.
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type job_parameters: dict
+        :param job_parameters: Provides options for specifying job information.
+            The dictionary can contain the following attributes:
+
+            * ArchiveId - The ID of the archive you want to retrieve.
+              This field is required only if the Type is set to
+              archive-retrieval.
+            * Description - The optional description for the job.
+            * Format - When initiating a job to retrieve a vault
+              inventory, you can optionally add this parameter to
+              specify the output format.  Valid values are: CSV|JSON.
+            * SNSTopic - The Amazon SNS topic ARN where Amazon Glacier
+              sends a notification when the job is completed and the
+              output is ready for you to download.
+            * Type - The job type.  Valid values are:
+              archive-retrieval|inventory-retrieval
+            * RetrievalByteRange - Optionally specify the range of
+              bytes to retrieve.
+            * InventoryRetrievalParameters: Optional job parameters
+                * Format - The output format, like "JSON"
+                * StartDate - ISO8601 starting date string
+                * EndDate - ISO8601 ending date string
+                * Limit - Maximum number of entries
+                * Marker - A unique string used for pagination
+
+        """
+        uri = 'vaults/%s/jobs' % vault_name
+        response_headers = [('x-amz-job-id', u'JobId'),
+                            ('Location', u'Location')]
+        json_job_data = json.dumps(job_data)
+        return self.make_request('POST', uri, data=json_job_data,
+                                 ok_responses=(202,),
+                                 response_headers=response_headers)
+
+    def get_job_output(self, vault_name, job_id, byte_range=None):
+        """
+        This operation downloads the output of the job you initiated
+        using InitiateJob. Depending on the job type you specified
+        when you initiated the job, the output will be either the
+        content of an archive or a vault inventory.
+
+        A job ID will not expire for at least 24 hours after Amazon
+        Glacier completes the job. That is, you can download the job
+        output within the 24 hours period after Amazon Glacier
+        completes the job.
+
+        If the job output is large, then you can use the `Range`
+        request header to retrieve a portion of the output. This
+        allows you to download the entire output in smaller chunks of
+        bytes. For example, suppose you have 1 GB of job output you
+        want to download and you decide to download 128 MB chunks of
+        data at a time, which is a total of eight Get Job Output
+        requests. You use the following process to download the job
+        output:
+
+
+        #. Download a 128 MB chunk of output by specifying the
+           appropriate byte range using the `Range` header.
+        #. Along with the data, the response includes a checksum of
+           the payload. You compute the checksum of the payload on the
+           client and compare it with the checksum you received in the
+           response to ensure you received all the expected data.
+        #. Repeat steps 1 and 2 for all the eight 128 MB chunks of
+           output data, each time specifying the appropriate byte range.
+        #. After downloading all the parts of the job output, you have
+           a list of eight checksum values. Compute the tree hash of
+           these values to find the checksum of the entire output. Using
+           the Describe Job API, obtain job information of the job that
+           provided you the output. The response includes the checksum of
+           the entire archive stored in Amazon Glacier. You compare this
+           value with the checksum you computed to ensure you have
+           downloaded the entire archive content with no errors.
+
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and the underlying REST API, go to
+        `Downloading a Vault Inventory`_, `Downloading an Archive`_,
+        and `Get Job Output `_
+
+        :type account_id: string
+        :param account_id: The `AccountId` is the AWS Account ID. You can
+            specify either the AWS Account ID or optionally a '-', in which
+            case Amazon Glacier uses the AWS Account ID associated with the
+            credentials used to sign the request. If you specify your Account
+            ID, do not include hyphens in it.
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type job_id: string
+        :param job_id: The job ID whose data is downloaded.
+
+        :type byte_range: string
+        :param byte_range: The range of bytes to retrieve from the output. For
+            example, if you want to download the first 1,048,576 bytes, specify
+            "Range: bytes=0-1048575". By default, this operation downloads the
+            entire output.
+        """
+        response_headers = [('x-amz-sha256-tree-hash', u'TreeHash'),
+                            ('Content-Range', u'ContentRange'),
+                            ('Content-Type', u'ContentType')]
+        headers = None
+        if byte_range:
+            headers = {'Range': 'bytes=%d-%d' % byte_range}
+        uri = 'vaults/%s/jobs/%s/output' % (vault_name, job_id)
+        response = self.make_request('GET', uri, headers=headers,
+                                     ok_responses=(200, 206),
+                                     response_headers=response_headers)
+        return response
+
+    # Archives
+
+    def upload_archive(self, vault_name, archive,
+                       linear_hash, tree_hash, description=None):
+        """
+        This operation adds an archive to a vault. This is a
+        synchronous operation, and for a successful upload, your data
+        is durably persisted. Amazon Glacier returns the archive ID in
+        the `x-amz-archive-id` header of the response.
+
+        You must use the archive ID to access your data in Amazon
+        Glacier. After you upload an archive, you should save the
+        archive ID returned so that you can retrieve or delete the
+        archive later. Besides saving the archive ID, you can also
+        index it and give it a friendly name to allow for better
+        searching. You can also use the optional archive description
+        field to specify how the archive is referred to in an external
+        index of archives, such as you might create in Amazon
+        DynamoDB. You can also get the vault inventory to obtain a
+        list of archive IDs in a vault. For more information, see
+        InitiateJob.
+
+        You must provide a SHA256 tree hash of the data you are
+        uploading. For information about computing a SHA256 tree hash,
+        see `Computing Checksums`_.
+
+        You can optionally specify an archive description of up to
+        1,024 printable ASCII characters. You can get the archive
+        description when you either retrieve the archive or get the
+        vault inventory. For more information, see InitiateJob. Amazon
+        Glacier does not interpret the description in any way. An
+        archive description does not need to be unique. You cannot use
+        the description to retrieve or sort the archive list.
+
+        Archives are immutable. After you upload an archive, you
+        cannot edit the archive or its description.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Uploading an Archive in Amazon Glacier`_ and `Upload
+        Archive`_ in the Amazon Glacier Developer Guide .
+
+        :type vault_name: str
+        :param vault_name: The name of the vault
+
+        :type archive: bytes
+        :param archive: The data to upload.
+
+        :type linear_hash: str
+        :param linear_hash: The SHA256 checksum (a linear hash) of the
+            payload.
+
+        :type tree_hash: str
+        :param tree_hash: The user-computed SHA256 tree hash of the
+            payload.  For more information on computing the
+            tree hash, see http://goo.gl/u7chF.
+
+        :type description: str
+        :param description: The optional description of the archive you
+            are uploading.
+        """
+        response_headers = [('x-amz-archive-id', u'ArchiveId'),
+                            ('Location', u'Location'),
+                            ('x-amz-sha256-tree-hash', u'TreeHash')]
+        uri = 'vaults/%s/archives' % vault_name
+        try:
+            content_length = str(len(archive))
+        except (TypeError, AttributeError):
+            # If a file like object is provided, try to retrieve
+            # the file size via fstat.
+            content_length = str(os.fstat(archive.fileno()).st_size)
+        headers = {'x-amz-content-sha256': linear_hash,
+                   'x-amz-sha256-tree-hash': tree_hash,
+                   'Content-Length': content_length}
+        if description:
+            headers['x-amz-archive-description'] = description
+        if self._is_file_like(archive):
+            sender = ResettingFileSender(archive)
+        else:
+            sender = None
+        return self.make_request('POST', uri, headers=headers,
+                                 sender=sender,
+                                 data=archive, ok_responses=(201,),
+                                 response_headers=response_headers)
+
+    def _is_file_like(self, archive):
+        return hasattr(archive, 'seek') and hasattr(archive, 'tell')
+
+    def delete_archive(self, vault_name, archive_id):
+        """
+        This operation deletes an archive from a vault. Subsequent
+        requests to initiate a retrieval of this archive will fail.
+        Archive retrievals that are in progress for this archive ID
+        may or may not succeed according to the following scenarios:
+
+
+        + If the archive retrieval job is actively preparing the data
+          for download when Amazon Glacier receives the delete archive
+          request, the archival retrieval operation might fail.
+        + If the archive retrieval job has successfully prepared the
+          archive for download when Amazon Glacier receives the delete
+          archive request, you will be able to download the output.
+
+
+        This operation is idempotent. Attempting to delete an already-
+        deleted archive does not result in an error.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Deleting an Archive in Amazon Glacier`_ and `Delete Archive`_
+        in the Amazon Glacier Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type archive_id: string
+        :param archive_id: The ID of the archive to delete.
+        """
+        uri = 'vaults/%s/archives/%s' % (vault_name, archive_id)
+        return self.make_request('DELETE', uri, ok_responses=(204,))
+
+    # Multipart
+
+    def initiate_multipart_upload(self, vault_name, part_size,
+                                  description=None):
+        """
+        This operation initiates a multipart upload. Amazon Glacier
+        creates a multipart upload resource and returns its ID in the
+        response. The multipart upload ID is used in subsequent
+        requests to upload parts of an archive (see
+        UploadMultipartPart).
+
+        When you initiate a multipart upload, you specify the part
+        size in number of bytes. The part size must be a megabyte
+        (1024 KB) multiplied by a power of 2-for example, 1048576 (1
+        MB), 2097152 (2 MB), 4194304 (4 MB), 8388608 (8 MB), and so
+        on. The minimum allowable part size is 1 MB, and the maximum
+        is 4 GB.
+
+        Every part you upload to this resource (see
+        UploadMultipartPart), except the last one, must have the same
+        size. The last one can be the same size or smaller. For
+        example, suppose you want to upload a 16.2 MB file. If you
+        initiate the multipart upload with a part size of 4 MB, you
+        will upload four parts of 4 MB each and one part of 0.2 MB.
+
+
+        You don't need to know the size of the archive when you start
+        a multipart upload because Amazon Glacier does not require you
+        to specify the overall archive size.
+
+
+        After you complete the multipart upload, Amazon Glacier
+        removes the multipart upload resource referenced by the ID.
+        Amazon Glacier also removes the multipart upload resource if
+        you cancel the multipart upload or it may be removed if there
+        is no activity for a period of 24 hours.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Uploading Large Archives in Parts (Multipart Upload)`_ and
+        `Initiate Multipart Upload`_ in the Amazon Glacier Developer
+        Guide .
+
+        The part size must be a megabyte (1024 KB) multiplied by a power of
+        2, for example, 1048576 (1 MB), 2097152 (2 MB), 4194304 (4 MB),
+        8388608 (8 MB), and so on. The minimum allowable part size is 1 MB,
+        and the maximum is 4 GB (4096 MB).
+
+        :type vault_name: str
+        :param vault_name: The name of the vault.
+
+        :type description: str
+        :param description: The archive description that you are uploading in
+            parts.
+
+        :type part_size: int
+        :param part_size: The size of each part except the last, in bytes. The
+            last part can be smaller than this part size.
+        """
+        response_headers = [('x-amz-multipart-upload-id', u'UploadId'),
+                            ('Location', u'Location')]
+        headers = {'x-amz-part-size': str(part_size)}
+        if description:
+            headers['x-amz-archive-description'] = description
+        uri = 'vaults/%s/multipart-uploads' % vault_name
+        response = self.make_request('POST', uri, headers=headers,
+                                     ok_responses=(201,),
+                                     response_headers=response_headers)
+        return response
+
+    def complete_multipart_upload(self, vault_name, upload_id,
+                                  sha256_treehash, archive_size):
+        """
+        You call this operation to inform Amazon Glacier that all the
+        archive parts have been uploaded and that Amazon Glacier can
+        now assemble the archive from the uploaded parts. After
+        assembling and saving the archive to the vault, Amazon Glacier
+        returns the URI path of the newly created archive resource.
+        Using the URI path, you can then access the archive. After you
+        upload an archive, you should save the archive ID returned to
+        retrieve the archive at a later point. You can also get the
+        vault inventory to obtain a list of archive IDs in a vault.
+        For more information, see InitiateJob.
+
+        In the request, you must include the computed SHA256 tree hash
+        of the entire archive you have uploaded. For information about
+        computing a SHA256 tree hash, see `Computing Checksums`_. On
+        the server side, Amazon Glacier also constructs the SHA256
+        tree hash of the assembled archive. If the values match,
+        Amazon Glacier saves the archive to the vault; otherwise, it
+        returns an error, and the operation fails. The ListParts
+        operation returns a list of parts uploaded for a specific
+        multipart upload. It includes checksum information for each
+        uploaded part that can be used to debug a bad checksum issue.
+
+        Additionally, Amazon Glacier also checks for any missing
+        content ranges when assembling the archive, if missing content
+        ranges are found, Amazon Glacier returns an error and the
+        operation fails.
+
+        Complete Multipart Upload is an idempotent operation. After
+        your first successful complete multipart upload, if you call
+        the operation again within a short period, the operation will
+        succeed and return the same archive ID. This is useful in the
+        event you experience a network issue that causes an aborted
+        connection or receive a 500 server error, in which case you
+        can repeat your Complete Multipart Upload request and get the
+        same archive ID without creating duplicate archives. Note,
+        however, that after the multipart upload completes, you cannot
+        call the List Parts operation and the multipart upload will
+        not appear in List Multipart Uploads response, even if
+        idempotent complete is possible.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Uploading Large Archives in Parts (Multipart Upload)`_ and
+        `Complete Multipart Upload`_ in the Amazon Glacier Developer
+        Guide .
+
+        :type checksum: string
+        :param checksum: The SHA256 tree hash of the entire archive. It is the
+            tree hash of SHA256 tree hash of the individual parts. If the value
+            you specify in the request does not match the SHA256 tree hash of
+            the final assembled archive as computed by Amazon Glacier, Amazon
+            Glacier returns an error and the request fails.
+
+        :type vault_name: str
+        :param vault_name: The name of the vault.
+
+        :type upload_id: str
+        :param upload_id: The upload ID of the multipart upload.
+
+        :type sha256_treehash: str
+        :param sha256_treehash: The SHA256 tree hash of the entire archive.
+            It is the tree hash of SHA256 tree hash of the individual parts.
+            If the value you specify in the request does not match the SHA256
+            tree hash of the final assembled archive as computed by Amazon
+            Glacier, Amazon Glacier returns an error and the request fails.
+
+        :type archive_size: int
+        :param archive_size: The total size, in bytes, of the entire
+            archive. This value should be the sum of all the sizes of
+            the individual parts that you uploaded.
+        """
+        response_headers = [('x-amz-archive-id', u'ArchiveId'),
+                            ('Location', u'Location')]
+        headers = {'x-amz-sha256-tree-hash': sha256_treehash,
+                   'x-amz-archive-size': str(archive_size)}
+        uri = 'vaults/%s/multipart-uploads/%s' % (vault_name, upload_id)
+        response = self.make_request('POST', uri, headers=headers,
+                                     ok_responses=(201,),
+                                     response_headers=response_headers)
+        return response
+
+    def abort_multipart_upload(self, vault_name, upload_id):
+        """
+        This operation aborts a multipart upload identified by the
+        upload ID.
+
+        After the Abort Multipart Upload request succeeds, you cannot
+        upload any more parts to the multipart upload or complete the
+        multipart upload. Aborting a completed upload fails. However,
+        aborting an already-aborted upload will succeed, for a short
+        time. For more information about uploading a part and
+        completing a multipart upload, see UploadMultipartPart and
+        CompleteMultipartUpload.
+
+        This operation is idempotent.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Working with Archives in Amazon Glacier`_ and `Abort
+        Multipart Upload`_ in the Amazon Glacier Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type upload_id: string
+        :param upload_id: The upload ID of the multipart upload to delete.
+        """
+        uri = 'vaults/%s/multipart-uploads/%s' % (vault_name, upload_id)
+        return self.make_request('DELETE', uri, ok_responses=(204,))
+
+    def list_multipart_uploads(self, vault_name, limit=None, marker=None):
+        """
+        This operation lists in-progress multipart uploads for the
+        specified vault. An in-progress multipart upload is a
+        multipart upload that has been initiated by an
+        InitiateMultipartUpload request, but has not yet been
+        completed or aborted. The list returned in the List Multipart
+        Upload response has no guaranteed order.
+
+        The List Multipart Uploads operation supports pagination. By
+        default, this operation returns up to 1,000 multipart uploads
+        in the response. You should always check the response for a
+        `marker` at which to continue the list; if there are no more
+        items the `marker` is `null`. To return a list of multipart
+        uploads that begins at a specific upload, set the `marker`
+        request parameter to the value you obtained from a previous
+        List Multipart Upload request. You can also limit the number
+        of uploads returned in the response by specifying the `limit`
+        parameter in the request.
+
+        Note the difference between this operation and listing parts
+        (ListParts). The List Multipart Uploads operation lists all
+        multipart uploads for a vault and does not require a multipart
+        upload ID. The List Parts operation requires a multipart
+        upload ID since parts are associated with a single upload.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and the underlying REST API, go to
+        `Working with Archives in Amazon Glacier`_ and `List Multipart
+        Uploads `_ in the Amazon Glacier Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type limit: string
+        :param limit: Specifies the maximum number of uploads returned in the
+            response body. If this value is not specified, the List Uploads
+            operation returns up to 1,000 uploads.
+
+        :type marker: string
+        :param marker: An opaque string used for pagination. This value
+            specifies the upload at which the listing of uploads should begin.
+            Get the marker value from a previous List Uploads response. You
+            need only include the marker if you are continuing the pagination
+            of results started in a previous List Uploads request.
+        """
+        params = {}
+        if limit:
+            params['limit'] = limit
+        if marker:
+            params['marker'] = marker
+        uri = 'vaults/%s/multipart-uploads' % vault_name
+        return self.make_request('GET', uri, params=params)
+
+    def list_parts(self, vault_name, upload_id, limit=None, marker=None):
+        """
+        This operation lists the parts of an archive that have been
+        uploaded in a specific multipart upload. You can make this
+        request at any time during an in-progress multipart upload
+        before you complete the upload (see CompleteMultipartUpload.
+        List Parts returns an error for completed uploads. The list
+        returned in the List Parts response is sorted by part range.
+
+        The List Parts operation supports pagination. By default, this
+        operation returns up to 1,000 uploaded parts in the response.
+        You should always check the response for a `marker` at which
+        to continue the list; if there are no more items the `marker`
+        is `null`. To return a list of parts that begins at a specific
+        part, set the `marker` request parameter to the value you
+        obtained from a previous List Parts request. You can also
+        limit the number of parts returned in the response by
+        specifying the `limit` parameter in the request.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and the underlying REST API, go to
+        `Working with Archives in Amazon Glacier`_ and `List Parts`_
+        in the Amazon Glacier Developer Guide .
+
+        :type vault_name: string
+        :param vault_name: The name of the vault.
+
+        :type upload_id: string
+        :param upload_id: The upload ID of the multipart upload.
+
+        :type marker: string
+        :param marker: An opaque string used for pagination. This value
+            specifies the part at which the listing of parts should begin. Get
+            the marker value from the response of a previous List Parts
+            response. You need only include the marker if you are continuing
+            the pagination of results started in a previous List Parts request.
+
+        :type limit: string
+        :param limit: Specifies the maximum number of parts returned in the
+            response body. If this value is not specified, the List Parts
+            operation returns up to 1,000 uploads.
+        """
+        params = {}
+        if limit:
+            params['limit'] = limit
+        if marker:
+            params['marker'] = marker
+        uri = 'vaults/%s/multipart-uploads/%s' % (vault_name, upload_id)
+        return self.make_request('GET', uri, params=params)
+
+    def upload_part(self, vault_name, upload_id, linear_hash,
+                    tree_hash, byte_range, part_data):
+        """
+        This operation uploads a part of an archive. You can upload
+        archive parts in any order. You can also upload them in
+        parallel. You can upload up to 10,000 parts for a multipart
+        upload.
+
+        Amazon Glacier rejects your upload part request if any of the
+        following conditions is true:
+
+
+        + **SHA256 tree hash does not match**To ensure that part data
+          is not corrupted in transmission, you compute a SHA256 tree
+          hash of the part and include it in your request. Upon
+          receiving the part data, Amazon Glacier also computes a SHA256
+          tree hash. If these hash values don't match, the operation
+          fails. For information about computing a SHA256 tree hash, see
+          `Computing Checksums`_.
+        + **Part size does not match**The size of each part except the
+          last must match the size specified in the corresponding
+          InitiateMultipartUpload request. The size of the last part
+          must be the same size as, or smaller than, the specified size.
+          If you upload a part whose size is smaller than the part size
+          you specified in your initiate multipart upload request and
+          that part is not the last part, then the upload part request
+          will succeed. However, the subsequent Complete Multipart
+          Upload request will fail.
+        + **Range does not align**The byte range value in the request
+          does not align with the part size specified in the
+          corresponding initiate request. For example, if you specify a
+          part size of 4194304 bytes (4 MB), then 0 to 4194303 bytes (4
+          MB - 1) and 4194304 (4 MB) to 8388607 (8 MB - 1) are valid
+          part ranges. However, if you set a range value of 2 MB to 6
+          MB, the range does not align with the part size and the upload
+          will fail.
+
+
+        This operation is idempotent. If you upload the same part
+        multiple times, the data included in the most recent request
+        overwrites the previously uploaded data.
+
+        An AWS account has full permission to perform all operations
+        (actions). However, AWS Identity and Access Management (IAM)
+        users don't have any permissions by default. You must grant
+        them explicit permission to perform specific actions. For more
+        information, see `Access Control Using AWS Identity and Access
+        Management (IAM)`_.
+
+        For conceptual information and underlying REST API, go to
+        `Uploading Large Archives in Parts (Multipart Upload)`_ and
+        `Upload Part `_ in the Amazon Glacier Developer Guide .
+
+        :type vault_name: str
+        :param vault_name: The name of the vault.
+
+        :type linear_hash: str
+        :param linear_hash: The SHA256 checksum (a linear hash) of the
+            payload.
+
+        :type tree_hash: str
+        :param tree_hash: The user-computed SHA256 tree hash of the
+            payload.  For more information on computing the
+            tree hash, see http://goo.gl/u7chF.
+
+        :type upload_id: str
+        :param upload_id: The unique ID associated with this upload
+            operation.
+
+        :type byte_range: tuple of ints
+        :param byte_range: Identifies the range of bytes in the assembled
+            archive that will be uploaded in this part. Amazon Glacier uses
+            this information to assemble the archive in the proper sequence.
+            The format of this header follows RFC 2616. An example header is
+            Content-Range:bytes 0-4194303/*.
+
+        :type part_data: bytes
+        :param part_data: The data to be uploaded for the part
+        """
+        headers = {'x-amz-content-sha256': linear_hash,
+                   'x-amz-sha256-tree-hash': tree_hash,
+                   'Content-Range': 'bytes %d-%d/*' % byte_range}
+        response_headers = [('x-amz-sha256-tree-hash', u'TreeHash')]
+        uri = 'vaults/%s/multipart-uploads/%s' % (vault_name, upload_id)
+        return self.make_request('PUT', uri, headers=headers,
+                                 data=part_data, ok_responses=(204,),
+                                 response_headers=response_headers)