Add test harness for matrix/clip state collapsing

tests/MatrixClipCollapseTest.cpp

+/*
+ * Copyright 2014 Google Inc.
+ *
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#include "Test.h"
+#include "SkCanvas.h"
+#include "SkDebugCanvas.h"
+#include "SkPicture.h"
+#include "SkPictureFlat.h"
+#include "SkPictureRecord.h"
+
+// This test exercises the Matrix/Clip State collapsing system. It generates
+// example skps and the compares the actual stored operations to the expected
+// operations. The test works by emitting canvas operations at three levels:
+// overall structure, bodies that draw something and model/clip state changes.
+//
+// Structure methods only directly emit save and restores but call the
+// ModelClip and Body helper methods to fill in the structure. Since they only
+// emit saves and restores the operations emitted by the structure methods will
+// be completely removed by the matrix/clip collapse. Note: every save in 
+// a structure method is followed by a call to a ModelClip helper.
+//
+// Body methods only directly emit draw ops and saveLayer/restore pairs but call
+// the ModelClip helper methods. Since the body methods emit the ops that cannot
+// be collapsed (i.e., draw ops, saveLayer/restore) they also generate the
+// expected result information. Note: every saveLayer in a body method is
+// followed by a call to a ModelClip helper.
+//
+// The ModelClip methods output matrix and clip ops in various orders and
+// combinations. They contribute to the expected result by outputting the 
+// expected matrix & clip ops. Note that, currently, the entire clip stack
+// is output for each MC state so the clip operations accumulate down the
+// save/restore stack.
+
+// TODOs:
+//   check on clip offsets
+//      - not sure if this is possible. The desire is to verify that the clip
+//        operations' offsets point to the correct follow-on operations. This
+//        could be difficult since there is no good way to communicate the
+//        offset stored in the SkPicture to the debugger's clip objects
+//   add comparison of rendered before & after images? 
+//      - not sure if this would be useful since it somewhat duplicates the
+//        correctness test of running render_pictures in record mode and
+//        rendering before and after images. Additionally the matrix/clip collapse
+//        is sure to cause some small differences so an automated test might
+//        yield too many false positives.
+//   run the matrix/clip collapse system on the 10K skp set
+//      - this should give us warm fuzzies that the matrix clip collapse
+//        system is ready for prime time
+//   bench the recording times with/without matrix/clip collapsing
+
+#ifdef COLLAPSE_MATRIX_CLIP_STATE
+
+// Extract the command ops from the input SkPicture
+static void gets_ops(SkPicture& input, SkTDArray<DrawType>* ops) {
+    SkDebugCanvas debugCanvas(input.width(), input.height());
+    debugCanvas.setBounds(input.width(), input.height());
+    input.draw(&debugCanvas);
+
+    ops->setCount(debugCanvas.getSize());
+    for (int i = 0; i < debugCanvas.getSize(); ++i) {
+        (*ops)[i] = debugCanvas.getDrawCommandAt(i)->getType();
+    }
+}
+
+enum ClipType {
+    kNone_ClipType,
+    kRect_ClipType,
+    kRRect_ClipType,
+    kPath_ClipType,
+    kRegion_ClipType,
+
+    kLast_ClipType = kRRect_ClipType
+};
+
+static const int kClipTypeCount = kLast_ClipType + 1;
+
+enum MatType {
+    kNone_MatType,
+    kTranslate_MatType,
+    kScale_MatType,
+    kSkew_MatType,
+    kRotate_MatType,
+    kConcat_MatType,
+    kSetMatrix_MatType,
+
+    kLast_MatType = kScale_MatType
+};
+
+static const int kMatTypeCount = kLast_MatType + 1;
+
+// TODO: implement the rest of the draw ops
+enum DrawOpType {
+    kNone_DrawOpType,
+#if 0
+    kBitmap_DrawOpType,
+    kBitmapMatrix_DrawOpType,
+    kBitmapNone_DrawOpType,
+    kBitmapRectToRect_DrawOpType,
+#endif
+    kClear_DrawOpType,
+#if 0
+    kData_DrawOpType,
+#endif
+    kOval_DrawOpType,
+#if 0
+    kPaint_DrawOpType,
+    kPath_DrawOpType,
+    kPicture_DrawOpType,
+    kPoints_DrawOpType,
+    kPosText_DrawOpType,
+    kPosTextTopBottom_DrawOpType,
+    kPosTextH_DrawOpType,
+    kPosTextHTopBottom_DrawOpType,
+#endif
+    kRect_DrawOpType,
+    kRRect_DrawOpType,
+#if 0
+    kSprite_DrawOpType,
+    kText_DrawOpType,
+    kTextOnPath_DrawOpType,
+    kTextTopBottom_DrawOpType,
+    kDrawVertices_DrawOpType,
+#endif
+
+    kLast_DrawOpType = kRect_DrawOpType
+};
+
+static const int kDrawOpTypeCount = kLast_DrawOpType + 1;
+
+typedef void (*PFEmitMC)(SkCanvas* canvas, MatType mat, ClipType clip, 
+                         DrawOpType draw, SkTDArray<DrawType>* expected, 
+                         int accumulatedClips);
+typedef void (*PFEmitBody)(SkCanvas* canvas, PFEmitMC emitMC, MatType mat, 
+                           ClipType clip, DrawOpType draw, 
+                           SkTDArray<DrawType>* expected, int accumulatedClips);
+typedef void (*PFEmitStruct)(SkCanvas* canvas, PFEmitMC emitMC, MatType mat, 
+                             ClipType clip, PFEmitBody emitBody, DrawOpType draw, 
+                             SkTDArray<DrawType>* expected);
+
+//////////////////////////////////////////////////////////////////////////////
+
+// TODO: expand the testing to include the different ops & AA types!
+static void emit_clip(SkCanvas* canvas, ClipType clip) {
+    switch (clip) {
+        case kNone_ClipType:
+            break;
+        case kRect_ClipType: {
+            SkRect r = SkRect::MakeLTRB(10, 10, 90, 90);
+            canvas->clipRect(r, SkRegion::kIntersect_Op, true);
+            break;
+        }
+        case kRRect_ClipType: {
+            SkRect r = SkRect::MakeLTRB(10, 10, 90, 90);
+            SkRRect rr;
+            rr.setRectXY(r, 10, 10);
+            canvas->clipRRect(rr, SkRegion::kIntersect_Op, true);
+            break;
+        }
+        case kPath_ClipType: {
+            SkPath p;
+            p.moveTo(5.0f, 5.0f);
+            p.lineTo(50.0f, 50.0f);
+            p.lineTo(100.0f, 5.0f);
+            p.close();
+            canvas->clipPath(p, SkRegion::kIntersect_Op, true);
+            break;
+        }
+        case kRegion_ClipType: {
+            SkIRect rects[2] = {
+                { 1, 1, 55, 55 },
+                { 45, 45, 99, 99 },
+            };
+            SkRegion r;
+            r.setRects(rects, 2);
+            canvas->clipRegion(r, SkRegion::kIntersect_Op);
+            break;
+        }
+        default:
+            SkASSERT(0);
+    }
+}
+
+static void add_clip(ClipType clip, MatType mat, SkTDArray<DrawType>* expected) {
+    if (NULL == expected) {
+        // expected is NULL if this clip will be fused into later clips
+        return;
+    }
+
+    switch (clip) {
+        case kNone_ClipType:
+            break;
+        case kRect_ClipType:
+            *expected->append() = CONCAT;
+            *expected->append() = CLIP_RECT;
+            break;
+        case kRRect_ClipType:
+            *expected->append() = CONCAT;
+            *expected->append() = CLIP_RRECT;
+            break;
+        case kPath_ClipType:
+            *expected->append() = CONCAT;
+            *expected->append() = CLIP_PATH;
+            break;
+        case kRegion_ClipType:
+            *expected->append() = CONCAT;
+            *expected->append() = CLIP_REGION;
+            break;
+        default:
+            SkASSERT(0);
+    }
+}
+
+static void emit_mat(SkCanvas* canvas, MatType mat) {
+    switch (mat) {
+    case kNone_MatType:
+        break;
+    case kTranslate_MatType:
+        canvas->translate(5.0f, 5.0f);
+        break;
+    case kScale_MatType:
+        canvas->scale(1.1f, 1.1f);
+        break;
+    case kSkew_MatType:
+        canvas->skew(1.1f, 1.1f);
+        break;
+    case kRotate_MatType:
+        canvas->rotate(1.0f);
+        break;
+    case kConcat_MatType: {
+        SkMatrix m;
+        m.setTranslate(1.0f, 1.0f);
+        canvas->concat(m);
+        break;
+    }
+    case kSetMatrix_MatType: {
+        SkMatrix m;
+        m.setTranslate(1.0f, 1.0f);
+        canvas->setMatrix(m);
+        break;
+    }
+    default:
+        SkASSERT(0);
+    }
+}
+
+static void add_mat(MatType mat, SkTDArray<DrawType>* expected) {
+    if (NULL == expected) {
+        // expected is NULL if this matrix call will be fused into later ones
+        return;
+    }
+
+    switch (mat) {
+    case kNone_MatType:
+        break;
+    case kTranslate_MatType:    // fall thru
+    case kScale_MatType:        // fall thru
+    case kSkew_MatType:         // fall thru
+    case kRotate_MatType:       // fall thru
+    case kConcat_MatType:       // fall thru
+    case kSetMatrix_MatType:    
+        // TODO: this system currently converts a setMatrix to concat. If we wanted to
+        // really preserve the setMatrix semantics we should keep it a setMatrix. I'm
+        // not sure if this is a good idea though since this would keep things like pinch
+        // zoom from working.
+        *expected->append() = CONCAT;
+        break;
+    default:
+        SkASSERT(0);
+    }
+} 
+
+static void emit_draw(SkCanvas* canvas, DrawOpType draw, SkTDArray<DrawType>* expected) {
+    switch (draw) {
+        case kNone_DrawOpType:
+            break;
+        case kClear_DrawOpType:
+            canvas->clear(SK_ColorRED);
+            *expected->append() = DRAW_CLEAR;
+            break;
+        case kOval_DrawOpType: {
+            SkRect r = SkRect::MakeLTRB(10, 10, 90, 90);
+            SkPaint p;
+            canvas->drawOval(r, p);
+            *expected->append() = DRAW_OVAL;
+            break;
+        }
+        case kRect_DrawOpType: {
+            SkRect r = SkRect::MakeLTRB(10, 10, 90, 90);
+            SkPaint p;
+            canvas->drawRect(r, p);
+            *expected->append() = DRAW_RECT;
+            break;
+        }
+        case kRRect_DrawOpType: {
+            SkRect r = SkRect::MakeLTRB(10.0f, 10.0f, 90.0f, 90.0f);
+            SkRRect rr;
+            rr.setRectXY(r, 5.0f, 5.0f);
+            SkPaint p;
+            canvas->drawRRect(rr, p);
+            *expected->append() = DRAW_RRECT;
+            break;
+        }
+        default:
+            SkASSERT(0);
+    }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+
+// Emit:
+//  clip
+//  matrix
+// Simple case - the clip isn't effect by the matrix
+static void emit_clip_and_mat(SkCanvas* canvas, MatType mat, ClipType clip, 
+                              DrawOpType draw, SkTDArray<DrawType>* expected, 
+                              int accumulatedClips) {
+    if (kNone_DrawOpType == draw) {
+        return;
+    }
+
+    emit_clip(canvas, clip);
+    emit_mat(canvas, mat);
+
+    for (int i = 0; i < accumulatedClips; ++i) {
+        add_clip(clip, mat, expected);
+    }
+    add_mat(mat, expected);
+}
+
+// Emit:
+//  matrix
+//  clip
+// Emitting the matrix first is more challenging since the matrix has to be
+// pushed across (i.e., applied to) the clip.
+static void emit_mat_and_clip(SkCanvas* canvas, MatType mat, ClipType clip, 
+                              DrawOpType draw, SkTDArray<DrawType>* expected, 
+                              int accumulatedClips) {
+    if (kNone_DrawOpType == draw) {
+        return;
+    }
+
+    emit_mat(canvas, mat);
+    emit_clip(canvas, clip);
+
+    // the matrix & clip order will be reversed once collapsed!
+    for (int i = 0; i < accumulatedClips; ++i) {
+        add_clip(clip, mat, expected);
+    }
+    add_mat(mat, expected);
+}
+
+// Emit:
+//  matrix
+//  clip
+//  matrix
+//  clip
+// This tests that the matrices and clips coalesce when collapsed
+static void emit_double_mat_and_clip(SkCanvas* canvas, MatType mat, ClipType clip, 
+                                     DrawOpType draw, SkTDArray<DrawType>* expected, 
+                                     int accumulatedClips) {
+    if (kNone_DrawOpType == draw) {
+        return;
+    }
+
+    emit_mat(canvas, mat);
+    emit_clip(canvas, clip);
+    emit_mat(canvas, mat);
+    emit_clip(canvas, clip);
+
+    for (int i = 0; i < accumulatedClips; ++i) {
+        add_clip(clip, mat, expected);
+        add_clip(clip, mat, expected);
+    }
+    add_mat(mat, expected);
+}
+
+// Emit:
+//  matrix
+//  clip
+//  clip
+// This tests accumulation of clips in same transform state. It also tests pushing
+// of the matrix across both the clips.
+static void emit_mat_clip_clip(SkCanvas* canvas, MatType mat, ClipType clip,
+                               DrawOpType draw, SkTDArray<DrawType>* expected,
+                               int accumulatedClips) {
+    if (kNone_DrawOpType == draw) {
+        return;
+    }
+    
+    emit_mat(canvas, mat);
+    emit_clip(canvas, clip);
+    emit_clip(canvas, clip);
+
+    for (int i = 0; i < accumulatedClips; ++i) {
+        add_clip(clip, mat, expected);
+        add_clip(clip, mat, expected);
+    }
+    add_mat(mat, expected);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+
+// Emit:
+//  matrix & clip calls
+//  draw op
+static void emit_body0(SkCanvas* canvas, PFEmitMC emitMC, MatType mat, 
+                       ClipType clip, DrawOpType draw,
+                       SkTDArray<DrawType>* expected, int accumulatedClips) {
+    bool needsSaveRestore = kNone_DrawOpType != draw && 
+                            (kNone_MatType != mat || kNone_ClipType != clip);
+
+    if (needsSaveRestore) {
+        *expected->append() = SAVE;
+    }
+    (*emitMC)(canvas, mat, clip, draw, expected, accumulatedClips+1);
+    emit_draw(canvas, draw, expected);
+    if (needsSaveRestore) {
+        *expected->append() = RESTORE;
+    }
+}
+
+// Emit:
+//  matrix & clip calls
+//  draw op
+//  matrix & clip calls
+//  draw op
+static void emit_body1(SkCanvas* canvas, PFEmitMC emitMC, MatType mat, 
+                       ClipType clip, DrawOpType draw,
+                       SkTDArray<DrawType>* expected, int accumulatedClips) {
+    bool needsSaveRestore = kNone_DrawOpType != draw && 
+                            (kNone_MatType != mat || kNone_ClipType != clip);
+
+    if (needsSaveRestore) {
+        *expected->append() = SAVE;
+    }
+    (*emitMC)(canvas, mat, clip, draw, expected, accumulatedClips+1);
+    emit_draw(canvas, draw, expected);
+    if (needsSaveRestore) {
+        *expected->append() = RESTORE;
+        *expected->append() = SAVE;
+    }
+    (*emitMC)(canvas, mat, clip, draw, expected, accumulatedClips+2);
+    emit_draw(canvas, draw, expected);
+    if (needsSaveRestore) {
+        *expected->append() = RESTORE;
+    }
+}
+
+// Emit:
+//  matrix & clip calls
+//  SaveLayer
+//      matrix & clip calls
+//      draw op
+//  Restore
+static void emit_body2(SkCanvas* canvas, PFEmitMC emitMC, MatType mat, 
+                       ClipType clip, DrawOpType draw,
+                       SkTDArray<DrawType>* expected, int accumulatedClips) {
+    bool needsSaveRestore = kNone_DrawOpType != draw && 
+                            (kNone_MatType != mat || kNone_ClipType != clip);
+
+    if (needsSaveRestore) {
+        *expected->append() = SAVE_LAYER;
+    }
+    (*emitMC)(canvas, mat, clip, draw, NULL, 0); // these get fused into later ops
+    // TODO: widen testing to exercise saveLayer's parameters
+    canvas->saveLayer(NULL, NULL);
+        if (needsSaveRestore) {
+            *expected->append() = SAVE;
+        }
+        (*emitMC)(canvas, mat, clip, draw, expected, accumulatedClips+2);
+        emit_draw(canvas, draw, expected);
+        if (needsSaveRestore) {
+            *expected->append() = RESTORE;
+        }
+    canvas->restore();
+    if (needsSaveRestore) {
+        *expected->append() = RESTORE;
+    }
+}
+
+// Emit:
+//  matrix & clip calls
+//  SaveLayer
+//      matrix & clip calls
+//      SaveLayer
+//          matrix & clip calls
+//          draw op
+//      Restore
+//      matrix & clip calls (will be ignored)
+//  Restore
+static void emit_body3(SkCanvas* canvas, PFEmitMC emitMC, MatType mat, 
+                       ClipType clip, DrawOpType draw,
+                       SkTDArray<DrawType>* expected, int accumulatedClips) {
+    bool needsSaveRestore = kNone_DrawOpType != draw && 
+                            (kNone_MatType != mat || kNone_ClipType != clip);
+
+    // This saveLayer will always be forced b.c. we currently can't tell 
+    // ahead of time if it will be empty (see comment in SkMatrixClipStateMgr::save)
+    *expected->append() = SAVE_LAYER;
+
+    (*emitMC)(canvas, mat, clip, draw, NULL, 0); // these get fused into later ops
+    // TODO: widen testing to exercise saveLayer's parameters
+    canvas->saveLayer(NULL, NULL);
+        (*emitMC)(canvas, mat, clip, draw, NULL, 0); // these get fused into later ops
+        if (needsSaveRestore) {
+            *expected->append() = SAVE_LAYER;
+        }
+        // TODO: widen testing to exercise saveLayer's parameters
+        canvas->saveLayer(NULL, NULL);
+            if (needsSaveRestore) {
+                *expected->append() = SAVE;
+            }
+            (*emitMC)(canvas, mat, clip, draw, expected, accumulatedClips+3);
+            emit_draw(canvas, draw, expected);
+            if (needsSaveRestore) {
+                *expected->append() = RESTORE;
+            }
+        canvas->restore();
+        if (needsSaveRestore) {
+            *expected->append() = RESTORE;
+        }
+    canvas->restore();
+
+    // required to match forced SAVE_LAYER
+    *expected->append() = RESTORE;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+
+// Emit:
+//  Save
+//      some body
+//  Restore
+// Note: the outer save/restore are provided by beginRecording/endRecording
+static void emit_struct0(SkCanvas* canvas, 
+                         PFEmitMC emitMC, MatType mat, ClipType clip,
+                         PFEmitBody emitBody, DrawOpType draw,
+                         SkTDArray<DrawType>* expected) {
+    (*emitBody)(canvas, emitMC, mat, clip, draw, expected, 0);
+}
+
+// Emit:
+//  Save
+//      matrix & clip calls
+//      Save
+//          some body
+//      Restore
+//      matrix & clip calls (will be ignored)
+//  Restore
+// Note: the outer save/restore are provided by beginRecording/endRecording
+static void emit_struct1(SkCanvas* canvas, 
+                         PFEmitMC emitMC, MatType mat, ClipType clip,
+                         PFEmitBody emitBody, DrawOpType draw,
+                         SkTDArray<DrawType>* expected) {
+    (*emitMC)(canvas, mat, clip, draw, NULL, 0); // these get fused into later ops
+    canvas->save();
+        (*emitBody)(canvas, emitMC, mat, clip, draw, expected, 1);
+    canvas->restore();
+    (*emitMC)(canvas, mat, clip, draw, NULL, 0); // these will get removed
+}
+
+// Emit:
+//  Save
+//      matrix & clip calls
+//      Save
+//          some body
+//      Restore
+//      Save
+//          some body
+//      Restore
+//      matrix & clip calls (will be ignored)
+//  Restore
+// Note: the outer save/restore are provided by beginRecording/endRecording
+static void emit_struct2(SkCanvas* canvas, 
+                         PFEmitMC emitMC, MatType mat, ClipType clip,
+                         PFEmitBody emitBody, DrawOpType draw,
+                         SkTDArray<DrawType>* expected) {
+    (*emitMC)(canvas, mat, clip, draw, NULL, 1); // these will get fused into later ops
+    canvas->save();
+        (*emitBody)(canvas, emitMC, mat, clip, draw, expected, 1);
+    canvas->restore();
+    canvas->save();
+        (*emitBody)(canvas, emitMC, mat, clip, draw, expected, 1);
+    canvas->restore();
+    (*emitMC)(canvas, mat, clip, draw, NULL, 1); // these will get removed
+}
+
+// Emit:
+//  Save
+//      matrix & clip calls
+//      Save
+//          some body
+//      Restore
+//      Save
+//          matrix & clip calls
+//          Save
+//              some body
+//          Restore
+//      Restore
+//      matrix & clip calls (will be ignored)
+//  Restore
+// Note: the outer save/restore are provided by beginRecording/endRecording
+static void emit_struct3(SkCanvas* canvas, 
+                         PFEmitMC emitMC, MatType mat, ClipType clip,
+                         PFEmitBody emitBody, DrawOpType draw,
+                         SkTDArray<DrawType>* expected) {
+    (*emitMC)(canvas, mat, clip, draw, NULL, 0); // these will get fused into later ops
+    canvas->save();
+        (*emitBody)(canvas, emitMC, mat, clip, draw, expected, 1);
+    canvas->restore();
+    canvas->save();
+        (*emitMC)(canvas, mat, clip, draw, NULL, 1); // these will get fused into later ops
+        canvas->save();
+            (*emitBody)(canvas, emitMC, mat, clip, draw, expected, 2);
+        canvas->restore();
+    canvas->restore();
+    (*emitMC)(canvas, mat, clip, draw, NULL, 0); // these will get removed
+}
+
+//////////////////////////////////////////////////////////////////////////////
+
+#ifdef COLLAPSE_MATRIX_CLIP_STATE
+static void print(const SkTDArray<DrawType>& expected, const SkTDArray<DrawType>& actual) {
+    SkDebugf("\n\nexpected %d --- actual %d\n", expected.count(), actual.count());
+    int max = SkMax32(expected.count(), actual.count());
+
+    for (int i = 0; i < max; ++i) {
+        if (i < expected.count()) {
+            SkDebugf("%16s,    ", SkDrawCommand::GetCommandString(expected[i]));
+        } else {
+            SkDebugf("%16s,    ", " ");
+        }
+
+        if (i < actual.count()) {
+            SkDebugf("%s\n", SkDrawCommand::GetCommandString(actual[i]));
+        } else {
+            SkDebugf("\n");
+        }
+    }
+    SkDebugf("\n\n");
+    SkASSERT(0);
+}
+#endif
+
+static void test_collapse(skiatest::Reporter* reporter) {
+    PFEmitStruct gStructure[] = { emit_struct0, emit_struct1, emit_struct2, emit_struct3 };
+    PFEmitBody gBody[] = { emit_body0, emit_body1, emit_body2, emit_body3 };
+    PFEmitMC gMCs[] = { emit_clip_and_mat, emit_mat_and_clip, 
+                        emit_double_mat_and_clip, emit_mat_clip_clip };
+
+    for (size_t i = 0; i < SK_ARRAY_COUNT(gStructure); ++i) {
+        for (size_t j = 0; j < SK_ARRAY_COUNT(gBody); ++j) {
+            for (size_t k = 0; k < SK_ARRAY_COUNT(gMCs); ++k) {
+                for (int l = 0; l < kMatTypeCount; ++l) {
+                    for (int m = 0; m < kClipTypeCount; ++m) {
+                        for (int n = 0; n < kDrawOpTypeCount; ++n) {
+#ifdef COLLAPSE_MATRIX_CLIP_STATE
+                            static int testID = -1;
+                            ++testID;
+                            if (testID < -1) {
+                                continue;
+                            }
+#endif
+
+                            SkTDArray<DrawType> expected, actual;
+
+                            SkPicture picture;
+
+                            // Note: beginRecording/endRecording add a save/restore pair
+                            SkCanvas* canvas = picture.beginRecording(100, 100);
+                            (*gStructure[i])(canvas, 
+                                             gMCs[k], 
+                                             (MatType) l,
+                                             (ClipType) m,
+                                             gBody[j], 
+                                             (DrawOpType) n, 
+                                             &expected);
+                            picture.endRecording();
+
+                            gets_ops(picture, &actual);
+
+                            REPORTER_ASSERT(reporter, expected.count() == actual.count());
+
+                            if (expected.count() != actual.count()) {
+#ifdef COLLAPSE_MATRIX_CLIP_STATE
+                                print(expected, actual);
+#endif
+                                continue;
+                            }
+
+                            for (int i = 0; i < expected.count(); ++i) {
+                                REPORTER_ASSERT(reporter, expected[i] == actual[i]);
+#ifdef COLLAPSE_MATRIX_CLIP_STATE
+                                if (expected[i] != actual[i]) {
+                                    print(expected, actual);
+                                }
+#endif
+                                break;
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+DEF_TEST(MatrixClipCollapse, reporter) {
+    test_collapse(reporter);
+}
+
+#endif