Pull new version of protobuf sources.

third_party/protobuf/src/google/protobuf/util/internal/json_stream_parser.cc

Index: third_party/protobuf/src/google/protobuf/util/internal/json_stream_parser.cc
diff --git a/third_party/protobuf/src/google/protobuf/util/internal/json_stream_parser.cc b/third_party/protobuf/src/google/protobuf/util/internal/json_stream_parser.cc
new file mode 100644
index 0000000000000000000000000000000000000000..d439a221d89f9fb2078752fa166794c922b22098
--- /dev/null
+++ b/third_party/protobuf/src/google/protobuf/util/internal/json_stream_parser.cc
@@ -0,0 +1,740 @@
+// Protocol Buffers - Google's data interchange format
+// Copyright 2008 Google Inc.  All rights reserved.
+// https://developers.google.com/protocol-buffers/
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include <google/protobuf/util/internal/json_stream_parser.h>
+
+#include <algorithm>
+#include <cctype>
+#include <cerrno>
+#include <cstdlib>
+#include <cstring>
+#include <memory>
+#ifndef _SHARED_PTR_H
+#include <google/protobuf/stubs/shared_ptr.h>
+#endif
+
+#include <google/protobuf/stubs/common.h>
+#include <google/protobuf/stubs/strutil.h>
+#include <google/protobuf/util/internal/object_writer.h>
+
+namespace google {
+namespace protobuf {
+namespace util {
+
+// Allow these symbols to be referenced as util::Status, util::error::* in
+// this file.
+using util::Status;
+namespace error {
+using util::error::INTERNAL;
+using util::error::INVALID_ARGUMENT;
+}  // namespace error
+
+namespace converter {
+
+// Number of digits in a unicode escape sequence (/uXXXX)
+static const int kUnicodeEscapedLength = 6;
+
+// Length of the true, false, and null literals.
+static const int true_len = strlen("true");
+static const int false_len = strlen("false");
+static const int null_len = strlen("null");
+
+inline bool IsLetter(char c) {
+  return ('a' <= c && c <= 'z') || ('A' <= c && c <= 'Z') || (c == '_') ||
+         (c == '$');
+}
+
+inline bool IsAlphanumeric(char c) {
+  return IsLetter(c) || ('0' <= c && c <= '9');
+}
+
+static bool ConsumeKey(StringPiece* input, StringPiece* key) {
+  if (input->empty() || !IsLetter((*input)[0])) return false;
+  int len = 1;
+  for (; len < input->size(); ++len) {
+    if (!IsAlphanumeric((*input)[len])) {
+      break;
+    }
+  }
+  *key = StringPiece(input->data(), len);
+  *input = StringPiece(input->data() + len, input->size() - len);
+  return true;
+}
+
+static bool MatchKey(StringPiece input) {
+  return !input.empty() && IsLetter(input[0]);
+}
+
+JsonStreamParser::JsonStreamParser(ObjectWriter* ow)
+    : ow_(ow),
+      stack_(),
+      leftover_(),
+      json_(),
+      p_(),
+      key_(),
+      key_storage_(),
+      finishing_(false),
+      parsed_(),
+      parsed_storage_(),
+      string_open_(0),
+      utf8_storage_(),
+      utf8_length_(0) {
+  // Initialize the stack with a single value to be parsed.
+  stack_.push(VALUE);
+}
+
+JsonStreamParser::~JsonStreamParser() {}
+
+util::Status JsonStreamParser::Parse(StringPiece json) {
+  return ParseChunk(json);
+}
+
+util::Status JsonStreamParser::FinishParse() {
+  // If we do not expect anything and there is nothing left to parse we're all
+  // done.
+  if (stack_.empty() && leftover_.empty()) {
+    return util::Status::OK;
+  }
+  // Parse the remainder in finishing mode, which reports errors for things like
+  // unterminated strings or unknown tokens that would normally be retried.
+  p_ = json_ = StringPiece(leftover_);
+  finishing_ = true;
+  util::Status result = RunParser();
+  if (result.ok()) {
+    SkipWhitespace();
+    if (!p_.empty()) {
+      result = ReportFailure("Parsing terminated before end of input.");
+    }
+  }
+  return result;
+}
+
+util::Status JsonStreamParser::ParseChunk(StringPiece chunk) {
+  // If we have leftovers from a previous chunk, append the new chunk to it and
+  // create a new StringPiece pointing at the string's data. This could be
+  // large but we rely on the chunks to be small, assuming they are fragments
+  // of a Cord.
+  if (!leftover_.empty()) {
+    chunk.AppendToString(&leftover_);
+    p_ = json_ = StringPiece(leftover_);
+  } else {
+    p_ = json_ = chunk;
+  }
+
+  finishing_ = false;
+  util::Status result = RunParser();
+  if (!result.ok()) return result;
+
+  SkipWhitespace();
+  if (p_.empty()) {
+    // If we parsed everything we had, clear the leftover.
+    leftover_.clear();
+  } else {
+    // If we do not expect anything i.e. stack is empty, and we have non-empty
+    // string left to parse, we report an error.
+    if (stack_.empty()) {
+      return ReportFailure("Parsing terminated before end of input.");
+    }
+    // If we expect future data i.e. stack is non-empty, and we have some
+    // unparsed data left, we save it for later parse.
+    leftover_ = p_.ToString();
+  }
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::RunParser() {
+  while (!stack_.empty()) {
+    ParseType type = stack_.top();
+    TokenType t = (string_open_ == 0) ? GetNextTokenType() : BEGIN_STRING;
+    stack_.pop();
+    util::Status result;
+    switch (type) {
+      case VALUE:
+        result = ParseValue(t);
+        break;
+
+      case OBJ_MID:
+        result = ParseObjectMid(t);
+        break;
+
+      case ENTRY:
+        result = ParseEntry(t);
+        break;
+
+      case ENTRY_MID:
+        result = ParseEntryMid(t);
+        break;
+
+      case ARRAY_VALUE:
+        result = ParseArrayValue(t);
+        break;
+
+      case ARRAY_MID:
+        result = ParseArrayMid(t);
+        break;
+
+      default:
+        result = util::Status(util::error::INTERNAL,
+                              StrCat("Unknown parse type: ", type));
+        break;
+    }
+    if (!result.ok()) {
+      // If we were cancelled, save our state and try again later.
+      if (!finishing_ && result == util::Status::CANCELLED) {
+        stack_.push(type);
+        // If we have a key we still need to render, make sure to save off the
+        // contents in our own storage.
+        if (!key_.empty() && key_storage_.empty()) {
+          key_.AppendToString(&key_storage_);
+          key_ = StringPiece(key_storage_);
+        }
+        result = util::Status::OK;
+      }
+      return result;
+    }
+  }
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::ParseValue(TokenType type) {
+  switch (type) {
+    case BEGIN_OBJECT:
+      return HandleBeginObject();
+    case BEGIN_ARRAY:
+      return HandleBeginArray();
+    case BEGIN_STRING:
+      return ParseString();
+    case BEGIN_NUMBER:
+      return ParseNumber();
+    case BEGIN_TRUE:
+      return ParseTrue();
+    case BEGIN_FALSE:
+      return ParseFalse();
+    case BEGIN_NULL:
+      return ParseNull();
+    case UNKNOWN:
+      return ReportUnknown("Expected a value.");
+    default: {
+      // Special case for having been cut off while parsing, wait for more data.
+      // This handles things like 'fals' being at the end of the string, we
+      // don't know if the next char would be e, completing it, or something
+      // else, making it invalid.
+      if (!finishing_ && p_.length() < false_len) {
+        return util::Status::CANCELLED;
+      }
+      return ReportFailure("Unexpected token.");
+    }
+  }
+}
+
+util::Status JsonStreamParser::ParseString() {
+  util::Status result = ParseStringHelper();
+  if (result.ok()) {
+    ow_->RenderString(key_, parsed_);
+    key_.clear();
+    parsed_.clear();
+    parsed_storage_.clear();
+  }
+  return result;
+}
+
+util::Status JsonStreamParser::ParseStringHelper() {
+  // If we haven't seen the start quote, grab it and remember it for later.
+  if (string_open_ == 0) {
+    string_open_ = *p_.data();
+    GOOGLE_DCHECK(string_open_ == '\"' || string_open_ == '\'');
+    Advance();
+  }
+  // Track where we last copied data from so we can minimize copying.
+  const char* last = p_.data();
+  while (!p_.empty()) {
+    const char* data = p_.data();
+    if (*data == '\\') {
+      // We're about to handle an escape, copy all bytes from last to data.
+      if (last < data) {
+        parsed_storage_.append(last, data - last);
+        last = data;
+      }
+      // If we ran out of string after the \, cancel or report an error
+      // depending on if we expect more data later.
+      if (p_.length() == 1) {
+        if (!finishing_) {
+          return util::Status::CANCELLED;
+        }
+        return ReportFailure("Closing quote expected in string.");
+      }
+      // Parse a unicode escape if we found \u in the string.
+      if (data[1] == 'u') {
+        util::Status result = ParseUnicodeEscape();
+        if (!result.ok()) {
+          return result;
+        }
+        // Move last pointer past the unicode escape and continue.
+        last = p_.data();
+        continue;
+      }
+      // Handle the standard set of backslash-escaped characters.
+      switch (data[1]) {
+        case 'b':
+          parsed_storage_.push_back('\b');
+          break;
+        case 'f':
+          parsed_storage_.push_back('\f');
+          break;
+        case 'n':
+          parsed_storage_.push_back('\n');
+          break;
+        case 'r':
+          parsed_storage_.push_back('\r');
+          break;
+        case 't':
+          parsed_storage_.push_back('\t');
+          break;
+        case 'v':
+          parsed_storage_.push_back('\v');
+          break;
+        default:
+          parsed_storage_.push_back(data[1]);
+      }
+      // We handled two characters, so advance past them and continue.
+      p_.remove_prefix(2);
+      last = p_.data();
+      continue;
+    }
+    // If we found the closing quote note it, advance past it, and return.
+    if (*data == string_open_) {
+      // If we didn't copy anything, reuse the input buffer.
+      if (parsed_storage_.empty()) {
+        parsed_ = StringPiece(last, data - last);
+      } else {
+        if (last < data) {
+          parsed_storage_.append(last, data - last);
+          last = data;
+        }
+        parsed_ = StringPiece(parsed_storage_);
+      }
+      // Clear the quote char so next time we try to parse a string we'll
+      // start fresh.
+      string_open_ = 0;
+      Advance();
+      return util::Status::OK;
+    }
+    // Normal character, just advance past it.
+    Advance();
+  }
+  // If we ran out of characters, copy over what we have so far.
+  if (last < p_.data()) {
+    parsed_storage_.append(last, p_.data() - last);
+  }
+  // If we didn't find the closing quote but we expect more data, cancel for now
+  if (!finishing_) {
+    return util::Status::CANCELLED;
+  }
+  // End of string reached without a closing quote, report an error.
+  string_open_ = 0;
+  return ReportFailure("Closing quote expected in string.");
+}
+
+// Converts a unicode escaped character to a decimal value stored in a char32
+// for use in UTF8 encoding utility.  We assume that str begins with \uhhhh and
+// convert that from the hex number to a decimal value.
+//
+// There are some security exploits with UTF-8 that we should be careful of:
+//   - http://www.unicode.org/reports/tr36/#UTF-8_Exploit
+//   - http://sites/intl-eng/design-guide/core-application
+util::Status JsonStreamParser::ParseUnicodeEscape() {
+  if (p_.length() < kUnicodeEscapedLength) {
+    if (!finishing_) {
+      return util::Status::CANCELLED;
+    }
+    return ReportFailure("Illegal hex string.");
+  }
+  GOOGLE_DCHECK_EQ('\\', p_.data()[0]);
+  GOOGLE_DCHECK_EQ('u', p_.data()[1]);
+  uint32 code = 0;
+  for (int i = 2; i < kUnicodeEscapedLength; ++i) {
+    if (!isxdigit(p_.data()[i])) {
+      return ReportFailure("Invalid escape sequence.");
+    }
+    code = (code << 4) + hex_digit_to_int(p_.data()[i]);
+  }
+  char buf[UTFmax];
+  int len = EncodeAsUTF8Char(code, buf);
+  // Advance past the unicode escape.
+  p_.remove_prefix(kUnicodeEscapedLength);
+  parsed_storage_.append(buf, len);
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::ParseNumber() {
+  NumberResult number;
+  util::Status result = ParseNumberHelper(&number);
+  if (result.ok()) {
+    switch (number.type) {
+      case NumberResult::DOUBLE:
+        ow_->RenderDouble(key_, number.double_val);
+        key_.clear();
+        break;
+
+      case NumberResult::INT:
+        ow_->RenderInt64(key_, number.int_val);
+        key_.clear();
+        break;
+
+      case NumberResult::UINT:
+        ow_->RenderUint64(key_, number.uint_val);
+        key_.clear();
+        break;
+
+      default:
+        return ReportFailure("Unable to parse number.");
+    }
+  }
+  return result;
+}
+
+util::Status JsonStreamParser::ParseNumberHelper(NumberResult* result) {
+  const char* data = p_.data();
+  int length = p_.length();
+
+  // Look for the first non-numeric character, or the end of the string.
+  int index = 0;
+  bool floating = false;
+  bool negative = data[index] == '-';
+  // Find the first character that cannot be part of the number. Along the way
+  // detect if the number needs to be parsed as a double.
+  // Note that this restricts numbers to the JSON specification, so for example
+  // we do not support hex or octal notations.
+  for (; index < length; ++index) {
+    char c = data[index];
+    if (isdigit(c)) continue;
+    if (c == '.' || c == 'e' || c == 'E') {
+      floating = true;
+      continue;
+    }
+    if (c == '+' || c == '-') continue;
+    // Not a valid number character, break out.
+    break;
+  }
+
+  // If the entire input is a valid number, and we may have more content in the
+  // future, we abort for now and resume when we know more.
+  if (index == length && !finishing_) {
+    return util::Status::CANCELLED;
+  }
+
+  // Create a string containing just the number, so we can use safe_strtoX
+  string number = p_.substr(0, index).ToString();
+
+  // Floating point number, parse as a double.
+  if (floating) {
+    if (!safe_strtod(number, &result->double_val)) {
+      return ReportFailure("Unable to parse number.");
+    }
+    result->type = NumberResult::DOUBLE;
+    p_.remove_prefix(index);
+    return util::Status::OK;
+  }
+
+  // Positive non-floating point number, parse as a uint64.
+  if (!negative) {
+    if (!safe_strtou64(number, &result->uint_val)) {
+      return ReportFailure("Unable to parse number.");
+    }
+    result->type = NumberResult::UINT;
+    p_.remove_prefix(index);
+    return util::Status::OK;
+  }
+
+  // Negative non-floating point number, parse as an int64.
+  if (!safe_strto64(number, &result->int_val)) {
+    return ReportFailure("Unable to parse number.");
+  }
+  result->type = NumberResult::INT;
+  p_.remove_prefix(index);
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::HandleBeginObject() {
+  GOOGLE_DCHECK_EQ('{', *p_.data());
+  Advance();
+  ow_->StartObject(key_);
+  key_.clear();
+  stack_.push(ENTRY);
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::ParseObjectMid(TokenType type) {
+  if (type == UNKNOWN) {
+    return ReportUnknown("Expected , or } after key:value pair.");
+  }
+
+  // Object is complete, advance past the comma and render the EndObject.
+  if (type == END_OBJECT) {
+    Advance();
+    ow_->EndObject();
+    return util::Status::OK;
+  }
+  // Found a comma, advance past it and get ready for an entry.
+  if (type == VALUE_SEPARATOR) {
+    Advance();
+    stack_.push(ENTRY);
+    return util::Status::OK;
+  }
+  // Illegal token after key:value pair.
+  return ReportFailure("Expected , or } after key:value pair.");
+}
+
+util::Status JsonStreamParser::ParseEntry(TokenType type) {
+  if (type == UNKNOWN) {
+    return ReportUnknown("Expected an object key or }.");
+  }
+
+  // Close the object and return. This allows for trailing commas.
+  if (type == END_OBJECT) {
+    ow_->EndObject();
+    Advance();
+    return util::Status::OK;
+  }
+
+  util::Status result;
+  if (type == BEGIN_STRING) {
+    // Key is a string (standard JSON), parse it and store the string.
+    result = ParseStringHelper();
+    if (result.ok()) {
+      key_storage_.clear();
+      if (!parsed_storage_.empty()) {
+        parsed_storage_.swap(key_storage_);
+        key_ = StringPiece(key_storage_);
+      } else {
+        key_ = parsed_;
+      }
+      parsed_.clear();
+    }
+  } else if (type == BEGIN_KEY) {
+    // Key is a bare key (back compat), create a StringPiece pointing to it.
+    result = ParseKey();
+  } else {
+    // Unknown key type, report an error.
+    result = ReportFailure("Expected an object key or }.");
+  }
+  // On success we next expect an entry mid ':' then an object mid ',' or '}'
+  if (result.ok()) {
+    stack_.push(OBJ_MID);
+    stack_.push(ENTRY_MID);
+  }
+  return result;
+}
+
+util::Status JsonStreamParser::ParseEntryMid(TokenType type) {
+  if (type == UNKNOWN) {
+    return ReportUnknown("Expected : between key:value pair.");
+  }
+  if (type == ENTRY_SEPARATOR) {
+    Advance();
+    stack_.push(VALUE);
+    return util::Status::OK;
+  }
+  return ReportFailure("Expected : between key:value pair.");
+}
+
+util::Status JsonStreamParser::HandleBeginArray() {
+  GOOGLE_DCHECK_EQ('[', *p_.data());
+  Advance();
+  ow_->StartList(key_);
+  key_.clear();
+  stack_.push(ARRAY_VALUE);
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::ParseArrayValue(TokenType type) {
+  if (type == UNKNOWN) {
+    return ReportUnknown("Expected a value or ] within an array.");
+  }
+
+  if (type == END_ARRAY) {
+    ow_->EndList();
+    Advance();
+    return util::Status::OK;
+  }
+
+  // The ParseValue call may push something onto the stack so we need to make
+  // sure an ARRAY_MID is after it, so we push it on now.
+  stack_.push(ARRAY_MID);
+  util::Status result = ParseValue(type);
+  if (result == util::Status::CANCELLED) {
+    // If we were cancelled, pop back off the ARRAY_MID so we don't try to
+    // push it on again when we try over.
+    stack_.pop();
+  }
+  return result;
+}
+
+util::Status JsonStreamParser::ParseArrayMid(TokenType type) {
+  if (type == UNKNOWN) {
+    return ReportUnknown("Expected , or ] after array value.");
+  }
+
+  if (type == END_ARRAY) {
+    ow_->EndList();
+    Advance();
+    return util::Status::OK;
+  }
+
+  // Found a comma, advance past it and expect an array value next.
+  if (type == VALUE_SEPARATOR) {
+    Advance();
+    stack_.push(ARRAY_VALUE);
+    return util::Status::OK;
+  }
+  // Illegal token after array value.
+  return ReportFailure("Expected , or ] after array value.");
+}
+
+util::Status JsonStreamParser::ParseTrue() {
+  ow_->RenderBool(key_, true);
+  key_.clear();
+  p_.remove_prefix(true_len);
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::ParseFalse() {
+  ow_->RenderBool(key_, false);
+  key_.clear();
+  p_.remove_prefix(false_len);
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::ParseNull() {
+  ow_->RenderNull(key_);
+  key_.clear();
+  p_.remove_prefix(null_len);
+  return util::Status::OK;
+}
+
+util::Status JsonStreamParser::ReportFailure(StringPiece message) {
+  static const int kContextLength = 20;
+  const char* p_start = p_.data();
+  const char* json_start = json_.data();
+  const char* begin = max(p_start - kContextLength, json_start);
+  const char* end = min(p_start + kContextLength, json_start + json_.size());
+  StringPiece segment(begin, end - begin);
+  string location(p_start - begin, ' ');
+  location.push_back('^');
+  return util::Status(util::error::INVALID_ARGUMENT,
+                      StrCat(message, "\n", segment, "\n", location));
+}
+
+util::Status JsonStreamParser::ReportUnknown(StringPiece message) {
+  // If we aren't finishing the parse, cancel parsing and try later.
+  if (!finishing_) {
+    return util::Status::CANCELLED;
+  }
+  if (p_.empty()) {
+    return ReportFailure(StrCat("Unexpected end of string. ", message));
+  }
+  return ReportFailure(message);
+}
+
+void JsonStreamParser::SkipWhitespace() {
+  while (!p_.empty() && ascii_isspace(*p_.data())) {
+    Advance();
+  }
+}
+
+void JsonStreamParser::Advance() {
+  // Advance by moving one UTF8 character while making sure we don't go beyond
+  // the length of StringPiece.
+  p_.remove_prefix(
+      min<int>(p_.length(), UTF8FirstLetterNumBytes(p_.data(), p_.length())));
+}
+
+util::Status JsonStreamParser::ParseKey() {
+  StringPiece original = p_;
+  if (!ConsumeKey(&p_, &key_)) {
+    return ReportFailure("Invalid key or variable name.");
+  }
+  // If we consumed everything but expect more data, reset p_ and cancel since
+  // we can't know if the key was complete or not.
+  if (!finishing_ && p_.empty()) {
+    p_ = original;
+    return util::Status::CANCELLED;
+  }
+  // Since we aren't using the key storage, clear it out.
+  key_storage_.clear();
+  return util::Status::OK;
+}
+
+JsonStreamParser::TokenType JsonStreamParser::GetNextTokenType() {
+  SkipWhitespace();
+
+  int size = p_.size();
+  if (size == 0) {
+    // If we ran out of data, report unknown and we'll place the previous parse
+    // type onto the stack and try again when we have more data.
+    return UNKNOWN;
+  }
+  // TODO(sven): Split this method based on context since different contexts
+  // support different tokens. Would slightly speed up processing?
+  const char* data = p_.data();
+  if (*data == '\"' || *data == '\'') return BEGIN_STRING;
+  if (*data == '-' || ('0' <= *data && *data <= '9')) {
+    return BEGIN_NUMBER;
+  }
+  if (size >= true_len && !strncmp(data, "true", true_len)) {
+    return BEGIN_TRUE;
+  }
+  if (size >= false_len && !strncmp(data, "false", false_len)) {
+    return BEGIN_FALSE;
+  }
+  if (size >= null_len && !strncmp(data, "null", null_len)) {
+    return BEGIN_NULL;
+  }
+  if (*data == '{') return BEGIN_OBJECT;
+  if (*data == '}') return END_OBJECT;
+  if (*data == '[') return BEGIN_ARRAY;
+  if (*data == ']') return END_ARRAY;
+  if (*data == ':') return ENTRY_SEPARATOR;
+  if (*data == ',') return VALUE_SEPARATOR;
+  if (MatchKey(p_)) {
+    return BEGIN_KEY;
+  }
+
+  // We don't know that we necessarily have an invalid token here, just that we
+  // can't parse what we have so far. So we don't report an error and just
+  // return UNKNOWN so we can try again later when we have more data, or if we
+  // finish and we have leftovers.
+  return UNKNOWN;
+}
+
+}  // namespace converter
+}  // namespace util
+}  // namespace protobuf
+}  // namespace google