net: split net/ssl out of net/base

net/base/ssl_config_service.h

Index: net/base/ssl_config_service.h
diff --git a/net/base/ssl_config_service.h b/net/base/ssl_config_service.h
deleted file mode 100644
index e87b6333559d9427f3f5c08b0ba6ac0e177869b0..0000000000000000000000000000000000000000
--- a/net/base/ssl_config_service.h
+++ /dev/null
@@ -1,214 +0,0 @@
-// Copyright (c) 2012 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-#ifndef NET_BASE_SSL_CONFIG_SERVICE_H_
-#define NET_BASE_SSL_CONFIG_SERVICE_H_
-
-#include <vector>
-
-#include "base/basictypes.h"
-#include "base/memory/ref_counted.h"
-#include "base/observer_list.h"
-#include "base/string_piece.h"
-#include "net/base/cert_status_flags.h"
-#include "net/base/crl_set.h"
-#include "net/base/net_export.h"
-#include "net/base/x509_certificate.h"
-
-namespace net {
-
-// Various TLS/SSL ProtocolVersion values encoded as uint16
-//      struct {
-//          uint8 major;
-//          uint8 minor;
-//      } ProtocolVersion;
-// The most significant byte is |major|, and the least significant byte
-// is |minor|.
-enum {
-  SSL_PROTOCOL_VERSION_SSL3 = 0x0300,
-  SSL_PROTOCOL_VERSION_TLS1 = 0x0301,
-  SSL_PROTOCOL_VERSION_TLS1_1 = 0x0302,
-  SSL_PROTOCOL_VERSION_TLS1_2 = 0x0303,
-};
-
-// A collection of SSL-related configuration settings.
-struct NET_EXPORT SSLConfig {
-  // Default to revocation checking.
-  // Default to SSL 3.0 ~ default_version_max() on.
-  SSLConfig();
-  ~SSLConfig();
-
-  // Returns true if |cert| is one of the certs in |allowed_bad_certs|.
-  // The expected cert status is written to |cert_status|. |*cert_status| can
-  // be NULL if user doesn't care about the cert status.
-  bool IsAllowedBadCert(X509Certificate* cert, CertStatus* cert_status) const;
-
-  // Same as above except works with DER encoded certificates instead
-  // of X509Certificate.
-  bool IsAllowedBadCert(const base::StringPiece& der_cert,
-                        CertStatus* cert_status) const;
-
-  // rev_checking_enabled is true if online certificate revocation checking is
-  // enabled (i.e. OCSP and CRL fetching).
-  //
-  // Regardless of this flag, CRLSet checking is always enabled and locally
-  // cached revocation information will be considered.
-  bool rev_checking_enabled;
-
-  // The minimum and maximum protocol versions that are enabled.
-  // SSL 3.0 is 0x0300, TLS 1.0 is 0x0301, TLS 1.1 is 0x0302, and so on.
-  // (Use the SSL_PROTOCOL_VERSION_xxx enumerators defined above.)
-  // SSL 2.0 is not supported. If version_max < version_min, it means no
-  // protocol versions are enabled.
-  uint16 version_min;
-  uint16 version_max;
-
-  // Presorted list of cipher suites which should be explicitly prevented from
-  // being used in addition to those disabled by the net built-in policy.
-  //
-  // By default, all cipher suites supported by the underlying SSL
-  // implementation will be enabled except for:
-  // - Null encryption cipher suites.
-  // - Weak cipher suites: < 80 bits of security strength.
-  // - FORTEZZA cipher suites (obsolete).
-  // - IDEA cipher suites (RFC 5469 explains why).
-  // - Anonymous cipher suites.
-  // - ECDSA cipher suites on platforms that do not support ECDSA signed
-  //   certificates, as servers may use the presence of such ciphersuites as a
-  //   hint to send an ECDSA certificate.
-  // The ciphers listed in |disabled_cipher_suites| will be removed in addition
-  // to the above list.
-  //
-  // Though cipher suites are sent in TLS as "uint8 CipherSuite[2]", in
-  // big-endian form, they should be declared in host byte order, with the
-  // first uint8 occupying the most significant byte.
-  // Ex: To disable TLS_RSA_WITH_RC4_128_MD5, specify 0x0004, while to
-  // disable TLS_ECDH_ECDSA_WITH_RC4_128_SHA, specify 0xC002.
-  std::vector<uint16> disabled_cipher_suites;
-
-  bool cached_info_enabled;  // True if TLS cached info extension is enabled.
-  bool channel_id_enabled;  // True if TLS channel ID extension is enabled.
-  bool false_start_enabled;  // True if we'll use TLS False Start.
-
-  // TODO(wtc): move the following members to a new SSLParams structure.  They
-  // are not SSL configuration settings.
-
-  struct NET_EXPORT CertAndStatus {
-    CertAndStatus();
-    ~CertAndStatus();
-
-    std::string der_cert;
-    CertStatus cert_status;
-  };
-
-  // Add any known-bad SSL certificate (with its cert status) to
-  // |allowed_bad_certs| that should not trigger an ERR_CERT_* error when
-  // calling SSLClientSocket::Connect.  This would normally be done in
-  // response to the user explicitly accepting the bad certificate.
-  std::vector<CertAndStatus> allowed_bad_certs;
-
-  // True if we should send client_cert to the server.
-  bool send_client_cert;
-
-  bool verify_ev_cert;  // True if we should verify the certificate for EV.
-
-  bool version_fallback;  // True if we are falling back to an older protocol
-                          // version (one still needs to decrement
-                          // version_max).
-
-  // If cert_io_enabled is false, then certificate verification will not
-  // result in additional HTTP requests. (For example: to fetch missing
-  // intermediates or to perform OCSP/CRL fetches.) It also implies that online
-  // revocation checking is disabled.
-  // NOTE: currently only effective on Linux
-  bool cert_io_enabled;
-
-  // The list of application level protocols supported. If set, this will
-  // enable Next Protocol Negotiation (if supported). The order of the
-  // protocols doesn't matter expect for one case: if the server supports Next
-  // Protocol Negotiation, but there is no overlap between the server's and
-  // client's protocol sets, then the first protocol in this list will be
-  // requested by the client.
-  std::vector<std::string> next_protos;
-
-  scoped_refptr<X509Certificate> client_cert;
-};
-
-// The interface for retrieving the SSL configuration.  This interface
-// does not cover setting the SSL configuration, as on some systems, the
-// SSLConfigService objects may not have direct access to the configuration, or
-// live longer than the configuration preferences.
-class NET_EXPORT SSLConfigService
-    : public base::RefCountedThreadSafe<SSLConfigService> {
- public:
-  // Observer is notified when SSL config settings have changed.
-  class NET_EXPORT Observer {
-   public:
-    // Notify observers if SSL settings have changed.  We don't check all of the
-    // data in SSLConfig, just those that qualify as a user config change.
-    // The following settings are considered user changes:
-    //     rev_checking_enabled
-    //     version_min
-    //     version_max
-    //     disabled_cipher_suites
-    //     channel_id_enabled
-    //     false_start_enabled
-    virtual void OnSSLConfigChanged() = 0;
-
-   protected:
-    virtual ~Observer() {}
-  };
-
-  SSLConfigService();
-
-  // May not be thread-safe, should only be called on the IO thread.
-  virtual void GetSSLConfig(SSLConfig* config) = 0;
-
-  // Sets and gets the current, global CRL set.
-  static void SetCRLSet(scoped_refptr<CRLSet> crl_set);
-  static scoped_refptr<CRLSet> GetCRLSet();
-
-  // Enables the TLS cached info extension, which allows the server to send
-  // just a digest of its certificate chain.
-  static void EnableCachedInfo();
-  static bool cached_info_enabled();
-
-  // Gets the default minimum protocol version.
-  static uint16 default_version_min();
-
-  // Gets the default maximum protocol version.
-  static uint16 default_version_max();
-
-  // Is SNI available in this configuration?
-  static bool IsSNIAvailable(SSLConfigService* service);
-
-  // Add an observer of this service.
-  void AddObserver(Observer* observer);
-
-  // Remove an observer of this service.
-  void RemoveObserver(Observer* observer);
-
-  // Calls the OnSSLConfigChanged method of registered observers. Should only be
-  // called on the IO thread.
-  void NotifySSLConfigChange();
-
- protected:
-  friend class base::RefCountedThreadSafe<SSLConfigService>;
-
-  virtual ~SSLConfigService();
-
-  // SetFlags sets the values of several flags based on global configuration.
-  static void SetSSLConfigFlags(SSLConfig* ssl_config);
-
-  // Process before/after config update.
-  void ProcessConfigUpdate(const SSLConfig& orig_config,
-                           const SSLConfig& new_config);
-
- private:
-  ObserverList<Observer> observer_list_;
-};
-
-}  // namespace net
-
-#endif  // NET_BASE_SSL_CONFIG_SERVICE_H_