- Add a skeleton MIPS assembler, disassembler and simulator.

runtime/vm/simulator_mips.cc

Index: runtime/vm/simulator_mips.cc
===================================================================
--- runtime/vm/simulator_mips.cc	(revision 19556)
+++ runtime/vm/simulator_mips.cc	(working copy)
@@ -16,6 +16,12 @@
 
 namespace dart {
 
+DEFINE_FLAG(int, stop_sim_at, 0, "Address to stop simulator at.");
+
+void Simulator::InitOnce() {
+}
+
+
 Simulator::Simulator() {
   // Setup simulator support first. Some of this information is needed to
   // setup the architecture state.
@@ -26,6 +32,18 @@
   stack_ = new char[(Isolate::GetSpecifiedStackSize() +
                      Isolate::kStackSizeBuffer +
                      kSimulatorStackUnderflowSize)];
+  icount_ = 0;
+  delay_slot_ = false;
+
+  // Setup architecture state.
+  // All registers are initialized to zero to start with.
+  for (int i = 0; i < kNumberOfCpuRegisters; i++) {
+    registers_[i] = 0;
+  }
+  pc_ = 0;
+  // The sp is initialized to point to the bottom (high address) of the
+  // allocated stack area.
+  registers_[SP] = StackTop();
 }
 
 
@@ -51,15 +69,19 @@
 // Sets the register in the architecture state. It will also deal with updating
 // Simulator internal state for special registers such as PC.
 void Simulator::set_register(Register reg, int32_t value) {
-  UNIMPLEMENTED();
+  if (reg != R0) {
+    registers_[reg] = value;
+  }
 }
 
 
 // Get the register from the architecture state. This function does handle
 // the special case of accessing the PC register.
 int32_t Simulator::get_register(Register reg) const {
-  UNIMPLEMENTED();
-  return 0;
+  if (reg == R0) {
+    return 0;
+  }
+  return registers_[reg];
 }
 
 
@@ -73,18 +95,182 @@
 }
 
 
-void Simulator::InitOnce() {
+void Simulator::Format(Instr* instr, const char* format) {
+  OS::PrintErr("Simulator - unknown instruction: %s\n", format);
+  UNIMPLEMENTED();
 }
 
+void Simulator::DecodeSpecial(Instr* instr) {
+  switch (instr->FunctionField()) {
+    case SLL: {
+      if ((instr->RdField() == R0) &&
+          (instr->RtField() == R0) &&
+          (instr->SaField() == 0)) {
+        // Format(instr, "nop");
+        // Nothing to be done for NOP.
+      } else {
+        Format(instr, "sll 'rd, 'rt, 'sa");
+      }
+      break;
+    }
+    case JR: {
+      ASSERT(instr->RtField() == R0);
+      ASSERT(instr->RdField() == R0);
+      ASSERT(!delay_slot_);
+      // Format(instr, "jr'hint 'rs");
+      uword next_pc = get_register(instr->RsField());
+      ExecuteDelaySlot();
+      pc_ = next_pc - Instr::kInstrSize;  // Account for regular PC increment.
+      break;
+    }
+    default: {
+      OS::PrintErr("DecodeSpecial: 0x%x\n", instr->InstructionBits());
+      UNREACHABLE();
+      break;
+    }
+  }
+}
 
+
+void Simulator::InstructionDecode(Instr* instr) {
+  switch (instr->OpcodeField()) {
+    case SPECIAL: {
+      DecodeSpecial(instr);
+      break;
+    }
+    case ORI: {
+      // Format(instr, "ori 'rt, 'rs, 'imm");
+      int32_t rs_val = get_register(instr->RsField());
+      set_register(instr->RtField(), rs_val | instr->ImmField());

[regis, 2013/03/06 21:18:42]

The immediate field should be zero extended, i.e. you need masking with 0xffff.

[Ivan Posva, 2013/03/07 11:03:22]

The result of ImmField() is already unsigned.

+      break;
+    }
+    default: {
+      OS::PrintErr("Undecoded instruction: 0x%x\n", instr->InstructionBits());
+      UNREACHABLE();
+      break;
+    }
+  }
+  pc_ += Instr::kInstrSize;
+}
+
+
+void Simulator::ExecuteDelaySlot() {
+  ASSERT(pc_ != kEndSimulatingPC);
+  delay_slot_ = true;
+  icount_++;
+  if (icount_ == FLAG_stop_sim_at) {
+    UNIMPLEMENTED();
+  }
+  Instr* instr = Instr::At(pc_ + Instr::kInstrSize);
+  InstructionDecode(instr);
+  delay_slot_ = false;
+}
+
+
+void Simulator::Execute() {
+  if (FLAG_stop_sim_at == 0) {
+    // Fast version of the dispatch loop without checking whether the simulator
+    // should be stopping at a particular executed instruction.
+    while (pc_ != kEndSimulatingPC) {
+      icount_++;
+      Instr* instr = Instr::At(pc_);
+      InstructionDecode(instr);
+    }
+  } else {
+    // FLAG_stop_sim_at is at the non-default value. Stop in the debugger when
+    // we reach the particular instruction count.
+    while (pc_ != kEndSimulatingPC) {
+      icount_++;
+      if (icount_ == FLAG_stop_sim_at) {
+        UNIMPLEMENTED();
+      } else {
+        Instr* instr = Instr::At(pc_);
+        InstructionDecode(instr);
+      }
+    }
+  }
+}
+
+
 int64_t Simulator::Call(int32_t entry,
                         int32_t parameter0,
                         int32_t parameter1,
                         int32_t parameter2,
-                        int32_t parameter3,
-                        int32_t parameter4) {
-  UNIMPLEMENTED();
-  return 0LL;
+                        int32_t parameter3) {
+  // Save the SP register before the call so we can restore it.
+  int32_t sp_before_call = get_register(SP);
+
+  // Setup parameters.
+  set_register(A0, parameter0);
+  set_register(A1, parameter1);
+  set_register(A2, parameter2);
+  set_register(A3, parameter3);
+
+  // Make sure the activation frames are properly aligned.
+  int32_t stack_pointer = sp_before_call;
+  static const int kFrameAlignment = OS::ActivationFrameAlignment();
+  if (kFrameAlignment > 0) {
+    stack_pointer = Utils::RoundDown(stack_pointer, kFrameAlignment);
+  }
+  set_register(SP, stack_pointer);
+
+  // Prepare to execute the code at entry.
+  set_pc(entry);
+  // Put down marker for end of simulation. The simulator will stop simulation
+  // when the PC reaches this value. By saving the "end simulation" value into
+  // RA the simulation stops when returning to this call point.
+  set_register(RA, kEndSimulatingPC);
+
+  // Remember the values of callee-saved registers.
+  // The code below assumes that r9 is not used as sb (static base) in
+  // simulator code and therefore is regarded as a callee-saved register.
+  int32_t r16_val = get_register(R16);
+  int32_t r17_val = get_register(R17);
+  int32_t r18_val = get_register(R18);
+  int32_t r19_val = get_register(R19);
+  int32_t r20_val = get_register(R20);
+  int32_t r21_val = get_register(R21);
+  int32_t r22_val = get_register(R22);
+  int32_t r23_val = get_register(R23);
+
+  // Setup the callee-saved registers with a known value. To be able to check
+  // that they are preserved properly across dart execution.
+  int32_t callee_saved_value = icount_;
+  set_register(R16, callee_saved_value);
+  set_register(R17, callee_saved_value);
+  set_register(R18, callee_saved_value);
+  set_register(R19, callee_saved_value);
+  set_register(R20, callee_saved_value);
+  set_register(R21, callee_saved_value);
+  set_register(R22, callee_saved_value);
+  set_register(R23, callee_saved_value);
+
+  // Start the simulation
+  Execute();
+
+  // Check that the callee-saved registers have been preserved.
+  ASSERT(callee_saved_value == get_register(R16));
+  ASSERT(callee_saved_value == get_register(R17));
+  ASSERT(callee_saved_value == get_register(R18));
+  ASSERT(callee_saved_value == get_register(R19));
+  ASSERT(callee_saved_value == get_register(R20));
+  ASSERT(callee_saved_value == get_register(R21));
+  ASSERT(callee_saved_value == get_register(R22));
+  ASSERT(callee_saved_value == get_register(R23));
+
+  // Restore callee-saved registers with the original value.
+  set_register(R16, r16_val);
+  set_register(R17, r17_val);
+  set_register(R18, r18_val);
+  set_register(R19, r19_val);
+  set_register(R20, r20_val);
+  set_register(R21, r21_val);
+  set_register(R22, r22_val);
+  set_register(R23, r23_val);
+
+  // Restore the SP register and return R1:R0.
+  set_register(SP, sp_before_call);
+  return Utils::LowHighTo64Bits(get_register(V0), get_register(V1));
 }
 
 }  // namespace dart