GDB 7.6.50

gdb/testsuite/gdb.mi/mi2-simplerun.exp

Index: gdb/testsuite/gdb.mi/mi2-simplerun.exp
diff --git a/gdb/testsuite/gdb.mi/mi2-simplerun.exp b/gdb/testsuite/gdb.mi/mi2-simplerun.exp
deleted file mode 100644
index d4bbdab4ba9df9f7c1b4250fa1028346e0454fde..0000000000000000000000000000000000000000
--- a/gdb/testsuite/gdb.mi/mi2-simplerun.exp
+++ /dev/null
@@ -1,189 +0,0 @@
-# Copyright 1999-2004, 2007-2012 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-#
-# Test essential Machine interface (MI) operations
-#
-# Verify that, using the MI, we can run a simple program and perform basic
-# debugging activities like: insert breakpoints, run the program,
-# step, next, continue until it ends and, last but not least, quit.
-#
-# The goal is not to test gdb functionality, which is done by other tests,
-# but to verify the correct output response to MI operations.
-#
-
-load_lib mi-support.exp
-set MIFLAGS "-i=mi2"
-
-gdb_exit
-if [mi_gdb_start] {
-    continue
-}
-
-standard_testfile basics.c
-
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-     untested mi2-simplerun.exp
-     return -1
-}
-
-mi_delete_breakpoints
-mi_gdb_reinitialize_dir $srcdir/$subdir
-mi_gdb_reinitialize_dir $srcdir/$subdir
-mi_gdb_load ${binfile}
-
-proc test_breakpoints_creation_and_listing {} {
-    global mi_gdb_prompt
-    global srcfile
-    global hex
-
-    set line_callee4_head  [gdb_get_line_number "callee4 ("]
-    set line_callee4_body  [expr $line_callee4_head + 2]
-    set line_callee3_head  [gdb_get_line_number "callee3 ("]
-    set line_callee3_body  [expr $line_callee3_head + 2]
-    set line_callee2_head  [gdb_get_line_number "callee2 ("]
-    set line_callee2_body  [expr $line_callee2_head + 2]
-    set line_main_head     [gdb_get_line_number "main ("]
-    set line_main_body     [expr $line_main_head + 2]
-
-    # Insert some breakpoints and list them
-    # Also, disable some so they do not interfere with other tests
-    # Tests:
-    # -break-insert
-    # -break-list
-    # -break-disable
-    # -break-info
-
-    mi_create_breakpoint "main" 1 keep main ".*basics.c" $line_main_body $hex \
-             "break-insert operation"
-
-    mi_create_breakpoint "basics.c:callee2" 2 keep callee2 ".*basics.c" $line_callee2_body $hex \
-             "insert breakpoint at basics.c:callee2"
-
-    mi_create_breakpoint "basics.c:$line_callee3_head" 3 keep callee3 ".*basics.c" $line_callee3_head $hex \
-             "insert breakpoint at basics.c:\$line_callee3_head"
-
-    mi_create_breakpoint "\"\\\"${srcfile}\\\":$line_callee4_head\"" 4 keep callee4 ".*basics.c" $line_callee4_head $hex \
-             "insert breakpoint at \"<fullfilename>\":\$line_callee4_head"
-
-    mi_gdb_test "204-break-list" \
-	    "204\\^done,BreakpointTable=\{.*,hdr=\\\[.*\\\],body=\\\[bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"$line_main_body\",times=\"0\",original-location=\".*\"\},.*\}\\\]\}" \
-                "list of breakpoints"
-
-    mi_gdb_test "205-break-disable 2 3 4" \
-                "205\\^done.*" \
-                "disabling of breakpoints"
-
-    mi_gdb_test "206-break-info 2" \
-	    "206\\^done,BreakpointTable=\{.*,hdr=\\\[.*\\\],body=\\\[bkpt=\{number=\"2\",.*,enabled=\"n\",.*\}\\\]\}" \
-                "list of breakpoints, 16 disabled"
-}
-
-proc test_running_the_program {} {
-    global mi_gdb_prompt
-    global hex
-
-    set line_main_head     [gdb_get_line_number "main ("]
-    set line_main_body     [expr $line_main_head + 2]
-
-    # Run the program without args, then specify srgs and rerun the program
-    # Tests:
-    # -exec-run
-    # -gdb-set
-
-    # mi_gdb_test cannot be used for asynchronous commands because there are
-    # two prompts involved and this can lead to a race condition.
-    # The following is equivalent to a send_gdb "000-exec-run\n"
-    mi_run_cmd
-    mi_expect_stop "breakpoint-hit" "main" "" ".*basics.c" "$line_main_body" \
-	{"" "disp=\"keep\"" } "run to main"
-}
-
-proc test_controlled_execution {} {
-    global mi_gdb_prompt
-    global hex
-
-    set line_callee4_head         [gdb_get_line_number "callee4 ("]
-    set line_callee4_body         [expr $line_callee4_head + 2]
-    set line_callee3_head         [gdb_get_line_number "callee3 ("]
-    set line_callee3_call         [expr $line_callee3_head + 2]
-    set line_callee3_close_brace  [expr $line_callee3_head + 3]
-    set line_callee1_head         [gdb_get_line_number "callee1 ("]
-    set line_callee1_body         [expr $line_callee1_head + 2]
-    set line_main_head            [gdb_get_line_number "main ("]
-    set line_main_body            [expr $line_main_head + 2]
-
-    # Continue execution until a breakpoint is reached, step into calls, verifying
-    # if the arguments are correctly shown, continue to the end of a called
-    # function, step over a call (next).
-    # Tests:
-    # -exec-continue
-    # -exec-next
-    # -exec-step
-    # -exec-finish
-
-    mi_next_to "main" "" "basics.c" [expr $line_main_body + 1] "next at main"
-
-    # FIXME: A string argument is not printed right; should be fixed and
-    #        we should look for the right thing here.
-    # NOTE: The ``\\\\\"'' is for \".
-    mi_step_to "callee1" \
-	"\{name=\"intarg\",value=\"2\"\},\{name=\"strarg\",value=\"$hex \\\\\"A string argument\.\\\\\"\"\},\{name=\"fltarg\",value=\"3.5\"\}" \
-	"basics.c" "$line_callee1_body" "step at main"
-
-    # FIXME: A string argument is not printed right; should be fixed and
-    #        we should look for the right thing here.
-    mi_execute_to "exec-step 3" "end-stepping-range" "callee4" "" \
-	"basics.c" $line_callee4_body "" "step to callee4"
-
-    # FIXME: A string argument is not printed right; should be fixed and
-    #        we should look for the right thing here.
-    # NOTE: The ``.'' is part of ``gdb-result-var="$1"''
-    mi_finish_to "callee3" ".*" "basics.c" \
-	"($line_callee3_call|$line_callee3_close_brace)" ".1" "0" "exec-finish"
-}
-
-proc test_controlling_breakpoints {} {
-    global mi_gdb_prompt
-
-    # Enable, delete, set ignore counts in breakpoints
-    # (disable was already tested above)
-    # Tests:
-    # -break-delete
-    # -break-enable
-    # -break-after
-    # -break-condition
-
-}
-
-proc test_program_termination {} {
-    global mi_gdb_prompt
-
-    # Run to completion: normal and forced
-    # Tests:
-    # -exec-abort
-    # (normal termination of inferior)
-
-    mi_execute_to "exec-continue" "exited-normally" "" "" "" "" "" "continue to end"
-}
-
-test_breakpoints_creation_and_listing
-test_running_the_program
-test_controlled_execution
-test_controlling_breakpoints
-test_program_termination
-
-mi_gdb_exit
-return 0