Function Layout, Global Variable Layout and Pooled Constants Layout Reordering

tests_lit/llvm2ice_tests/reorder-functions.ll

+; This is a smoke test of function reordering.

[Jim Stichnoth, 2015/06/25 13:20:59]

Some fairly shallow comments:

1. I think it would be easier for me to read and recognize the differences
between tests if, for each of the 4 separate tests, you put the Om1 and O2 cases
together, and a blank line between each Om1/O2 set.  E.g.:

RUN: %p2i ... -O2 ... --check-prefix=DEFAULTWINDOWSIZE
RUN: %p2i ... -Om1 ... --check-prefix=DEFAULTWINDOWSIZE

RUN: %p2i ... -O2 ... --check-prefix=WINDOWSIZE1
RUN: %p2i ... -Om1 ... --check-prefix=WINDOWSIZE1

RUN: %p2i ... -O2 ... --check-prefix=SEQUENTIAL
RUN: %p2i ... -Om1 ... --check-prefix=SEQUENTIAL

RUN: %p2i ... -O2 ... --check-prefix=WINDOWSIZEMAX
RUN: %p2i ... -Om1 ... --check-prefix=WINDOWSIZEMAX

2. I would rename the functions something like func1, func2, func3.  Easier to
"see" the permutation in the CHECK lines.

3. Maybe simplify the 6 functions?  They could all just be like:

define void func1() {
  ret void
}

That would make it easier to focus on the aspect being tested.

[qining, 2015/06/25 21:10:10]

Done.

[Jim Stichnoth, 2015/06/26 01:54:57]

You only addressed #1, while #2 and #3 are the same as before...

[qining, 2015/06/26 03:16:08]

Done. Sorry, I should be more careful.

+
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -O2 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    | FileCheck %s --check-prefix=DEFAULTWINDOWSIZE
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -O2 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    -reorder-functions-window-size=1 \
+; RUN:    | FileCheck %s --check-prefix=WINDOWSIZE1
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -O2 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    -threads=0 \
+; RUN:    | FileCheck %s --check-prefix=SEQUENTIAL
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -O2 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    -reorder-functions-window-size=0xffffffff \
+; RUN:    | FileCheck %s --check-prefix=WINDOWSIZEMAX
+
+
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -Om1 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    | FileCheck %s --check-prefix=DEFAULTWINDOWSIZE
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -Om1 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    -reorder-functions-window-size=1 \
+; RUN:    | FileCheck %s --check-prefix=WINDOWSIZE1
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -Om1 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    -threads=0 \
+; RUN:    | FileCheck %s --check-prefix=SEQUENTIAL
+; RUN: %p2i -i %s --filetype=obj --disassemble --args -Om1 \
+; RUN:    -sz-seed=1 -reorder-functions \
+; RUN:    -reorder-functions-window-size=0xffffffff \
+; RUN:    | FileCheck %s --check-prefix=WINDOWSIZEMAX
+
+define i32 @first_function(i32 %arg) {
+entry:
+  %res = add i32 200000, %arg
+  ret i32 %res
+}
+
+define float @second_function(float* %arg) {
+entry:
+  %arg.int = ptrtoint float* %arg to i32
+  %addr.int = add i32 %arg.int, 200000
+  %addr.ptr = inttoptr i32 %addr.int to float*
+  %addr.load = load float, float* %addr.ptr, align 4
+  ret float %addr.load
+}
+
+define i64 @third_function(i32 %arg) {
+entry:
+  %0 = sext i32 %arg to i64
+  %res = add i64 90000000000, %0
+  ret i64 %res
+}
+
+define i64 @fourth_function(i64* %arg) {
+entry:
+  %arg.int = ptrtoint i64* %arg to i32
+  %arg.new = add i32 %arg.int, 90000
+  %arg.ptr = inttoptr i32 %arg.new to i64*
+  %arg.load = load i64, i64* %arg.ptr, align 1
+  ret i64 %arg.load
+}
+
+define internal i32 @fifth_function(i32 %a) {
+entry:
+  %a_8 = trunc i32 %a to i8
+  %add = add i8 %a_8, 123
+  %ret = zext i8 %add to i32
+  ret i32 %ret
+}
+
+define internal i32 @sixth_function(i32 %a) {
+entry:
+  %a_16 = trunc i32 %a to i16
+  %add = add i16 %a_16, 32766
+  %ret = zext i16 %add to i32
+  ret i32 %ret
+}
+
+; DEFAULTWINDOWSIZE-LABEL: fourth_function
+; DEFAULTWINDOWSIZE-LABEL: first_function
+; DEFAULTWINDOWSIZE-LABEL: third_function
+; DEFAULTWINDOWSIZE-LABEL: sixth_function
+; DEFAULTWINDOWSIZE-LABEL: fifth_function
+; DEFAULTWINDOWSIZE-LABEL: second_function
+
+; WINDOWSIZE1-LABEL: first_function
+; WINDOWSIZE1-LABEL: second_function
+; WINDOWSIZE1-LABEL: third_function
+; WINDOWSIZE1-LABEL: fourth_function
+; WINDOWSIZE1-LABEL: fifth_function
+; WINDOWSIZE1-LABEL: sixth_function
+
+; SEQUENTIAL-LABEL: first_function
+; SEQUENTIAL-LABEL: second_function
+; SEQUENTIAL-LABEL: third_function
+; SEQUENTIAL-LABEL: fourth_function
+; SEQUENTIAL-LABEL: fifth_function
+; SEQUENTIAL-LABEL: sixth_function
+
+; WINDOWSIZEMAX-LABEL: fourth_function
+; WINDOWSIZEMAX-LABEL: first_function
+; WINDOWSIZEMAX-LABEL: third_function
+; WINDOWSIZEMAX-LABEL: sixth_function
+; WINDOWSIZEMAX-LABEL: fifth_function
+; WINDOWSIZEMAX-LABEL: second_function
+

[Jim Stichnoth, 2015/06/25 13:20:59]

Git often complains about "trailing whitespace" when there are blank lines at
the end of the file.

[qining, 2015/06/25 21:10:10]

Done.