remove generated_sdk from checked in code

test/generated_sdk/lib/core/int.dart

Index: test/generated_sdk/lib/core/int.dart
diff --git a/test/generated_sdk/lib/core/int.dart b/test/generated_sdk/lib/core/int.dart
deleted file mode 100644
index ca21390fbd17d82f998eb8f5a67cb2d049acc394..0000000000000000000000000000000000000000
--- a/test/generated_sdk/lib/core/int.dart
+++ /dev/null
@@ -1,283 +0,0 @@
-// Copyright (c) 2012, the Dart project authors.  Please see the AUTHORS file
-// for details. All rights reserved. Use of this source code is governed by a
-// BSD-style license that can be found in the LICENSE file.
-
-part of dart.core;
-
-/**
- * An arbitrarily large integer.
- *
- * **Note:** When compiling to JavaScript, integers are
- * implemented as JavaScript numbers. When compiling to JavaScript,
- * integers are therefore restricted to 53 significant bits because
- * all JavaScript numbers are double-precision floating point
- * values. The behavior of the operators and methods in the [int]
- * class therefore sometimes differs between the Dart VM and Dart code
- * compiled to JavaScript.
- *
- * It is a compile-time error for a class to attempt to extend or implement int.
- */
-abstract class int extends num {
-  /**
-   * Returns the integer value of the given environment declaration [name].
-   *
-   * The result is the same as would be returned by:
-   *
-   *     int.parse(const String.fromEnvironment(name, defaultValue: ""),
-   *               (_) => defaultValue)
-   *
-   * Example:
-   *
-   *     const int.fromEnvironment("defaultPort", defaultValue: 80)
-   */
-  factory int.fromEnvironment(String name, {int defaultValue}) {
-    throw new UnsupportedError(
-        'int.fromEnvironment can only be used as a const constructor');
-  }
-
-  /**
-   * Bit-wise and operator.
-   *
-   * Treating both `this` and [other] as sufficiently large two's component
-   * integers, the result is a number with only the bits set that are set in
-   * both `this` and [other]
-   *
-   * Of both operands are negative, the result is negative, otherwise
-   * the result is non-negative.
-   */
-  int operator &(int other);
-
-  /**
-   * Bit-wise or operator.
-   *
-   * Treating both `this` and [other] as sufficiently large two's component
-   * integers, the result is a number with the bits set that are set in either
-   * of `this` and [other]
-   *
-   * If both operands are non-negative, the result is non-negative,
-   * otherwise the result us negative.
-   */
-  int operator |(int other);
-
-  /**
-   * Bit-wise exclusive-or operator.
-   *
-   * Treating both `this` and [other] as sufficiently large two's component
-   * integers, the result is a number with the bits set that are set in one,
-   * but not both, of `this` and [other]
-   *
-   * If the operands have the same sign, the result is non-negative,
-   * otherwise the result is negative.
-   */
-  int operator ^(int other);
-
-  /**
-   * The bit-wise negate operator.
-   *
-   * Treating `this` as a sufficiently large two's component integer,
-   * the result is a number with the opposite bits set.
-   *
-   * This maps any integer `x` to `-x - 1`.
-   */
-  int operator ~();
-
-  /**
-   * Shift the bits of this integer to the left by [shiftAmount].
-   *
-   * Shifting to the left makes the number larger, effectively multiplying
-   * the number by `pow(2, shiftIndex)`.
-   *
-   * There is no limit on the size of the result. It may be relevant to
-   * limit intermediate values by using the "and" operator with a suitable
-   * mask.
-   *
-   * It is an error of [shiftAmount] is negative.
-   */
-  int operator <<(int shiftAmount);
-
-  /**
-   * Shift the bits of this integer to the right by [shiftAmount].
-   *
-   * Shifting to the right makes the number smaller and drops the least
-   * significant bits, effectively doing an integer division by
-   *`pow(2, shiftIndex)`.
-   *
-   * It is an error of [shiftAmount] is negative.
-   */
-  int operator >>(int shiftAmount);
-
-  /** Returns true if and only if this integer is even. */
-  bool get isEven;
-
-  /** Returns true if and only if this integer is odd. */
-  bool get isOdd;
-
-  /**
-   * Returns the minimum number of bits required to store this integer.
-   *
-   * The number of bits excludes the sign bit, which gives the natural length
-   * for non-negative (unsigned) values.  Negative values are complemented to
-   * return the bit position of the first bit that differs from the sign bit.
-   *
-   * To find the the number of bits needed to store the value as a signed value,
-   * add one, i.e. use `x.bitLength + 1`.
-   *
-   *      x.bitLength == (-x-1).bitLength
-   *
-   *      3.bitLength == 2;     // 00000011
-   *      2.bitLength == 2;     // 00000010
-   *      1.bitLength == 1;     // 00000001
-   *      0.bitLength == 0;     // 00000000
-   *      (-1).bitLength == 0;  // 11111111
-   *      (-2).bitLength == 1;  // 11111110
-   *      (-3).bitLength == 2;  // 11111101
-   *      (-4).bitLength == 2;  // 11111100
-   */
-  int get bitLength;
-
-  /**
-   * Returns the least significant [width] bits of this integer as a
-   * non-negative number (i.e. unsigned representation).  The returned value has
-   * zeros in all bit positions higher than [width].
-   *
-   *     (-1).toUnsigned(5) == 32   // 11111111  ->  00011111
-   *
-   * This operation can be used to simulate arithmetic from low level languages.
-   * For example, to increment an 8 bit quantity:
-   *
-   *     q = (q + 1).toUnsigned(8);
-   *
-   * `q` will count from `0` up to `255` and then wrap around to `0`.
-   *
-   * If the input fits in [width] bits without truncation, the result is the
-   * same as the input.  The minimum width needed to avoid truncation of `x` is
-   * given by `x.bitLength`, i.e.
-   *
-   *     x == x.toUnsigned(x.bitLength);
-   */
-  int toUnsigned(int width);
-
-  /**
-   * Returns the least significant [width] bits of this integer, extending the
-   * highest retained bit to the sign.  This is the same as truncating the value
-   * to fit in [width] bits using an signed 2-s complement representation.  The
-   * returned value has the same bit value in all positions higher than [width].
-   *
-   *                                    V--sign bit-V
-   *     16.toSigned(5) == -16   //  00010000 -> 11110000
-   *     239.toSigned(5) == 15   //  11101111 -> 00001111
-   *                                    ^           ^
-   *
-   * This operation can be used to simulate arithmetic from low level languages.
-   * For example, to increment an 8 bit signed quantity:
-   *
-   *     q = (q + 1).toSigned(8);
-   *
-   * `q` will count from `0` up to `127`, wrap to `-128` and count back up to
-   * `127`.
-   *
-   * If the input value fits in [width] bits without truncation, the result is
-   * the same as the input.  The minimum width needed to avoid truncation of `x`
-   * is `x.bitLength + 1`, i.e.
-   *
-   *     x == x.toSigned(x.bitLength + 1);
-   */
-  int toSigned(int width);
-
-  /**
-   * Return the negative value of this integer.
-   *
-   * The result of negating an integer always has the opposite sign, except
-   * for zero, which is its own negation.
-   */
-  int operator -();
-
-  /**
-   * Returns the absolute value of this integer.
-   *
-   * For any integer `x`, the result is the same as `x < 0 ? -x : x`.
-   */
-  int abs();
-
-  /**
-   * Returns the sign of this integer.
-   *
-   * Returns 0 for zero, -1 for values less than zero and
-   * +1 for values greater than zero.
-   */
-  int get sign;
-
-  /** Returns `this`. */
-  int round();
-
-  /** Returns `this`. */
-  int floor();
-
-  /** Returns `this`. */
-  int ceil();
-
-  /** Returns `this`. */
-  int truncate();
-
-  /** Returns `this.toDouble()`. */
-  double roundToDouble();
-
-  /** Returns `this.toDouble()`. */
-  double floorToDouble();
-
-  /** Returns `this.toDouble()`. */
-  double ceilToDouble();
-
-  /** Returns `this.toDouble()`. */
-  double truncateToDouble();
-
-  /**
-   * Returns a String-representation of this integer.
-   *
-   * The returned string is parsable by [parse].
-   * For any `int` [:i:], it is guaranteed that
-   * [:i == int.parse(i.toString()):].
-   */
-  String toString();
-
-  /**
-   * Converts [this] to a string representation in the given [radix].
-   *
-   * In the string representation, lower-case letters are used for digits above
-   * '9'.
-   *
-   * The [radix] argument must be an integer in the range 2 to 36.
-   */
-  String toRadixString(int radix);
-
-  /**
-   * Parse [source] as an integer literal and return its value.
-   *
-   * The [radix] must be in the range 2..36. The digits used are
-   * first the decimal digits 0..9, and then the letters 'a'..'z'.
-   * Accepts capital letters as well.
-   *
-   * If no [radix] is given then it defaults to 10, unless the string starts
-   * with "0x", "-0x" or "+0x", in which case the radix is set to 16 and the
-   * "0x" is ignored.
-   *
-   * The [source] must be a non-empty sequence of base-[radix] digits,
-   * optionally prefixed with a minus or plus sign ('-' or '+').
-   *
-   * It must always be the case for an int [:n:] and radix [:r:] that
-   * [:n == int.parse(n.toRadixString(r), radix: r):].
-   *
-   * If the [source] is not a valid integer literal, optionally prefixed by a
-   * sign, the [onError] is called with the [source] as argument, and its return
-   * value is used instead. If no [onError] is provided, a [FormatException]
-   * is thrown.
-   *
-   * The [onError] function is only invoked if [source] is a [String]. It is
-   * not invoked if the [source] is, for example, `null`.
-   */
-  static int parse(String source,
-                         { int radix,
-                           int onError(String source) }) {
-    return Primitives.parseInt(source, radix, onError);
-  }
-}