libvpx: Add VP9 decoder.

source/libvpx/vpx/vp8cx.h

 /*
  *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
  *
  *  Use of this source code is governed by a BSD-style license
  *  that can be found in the LICENSE file in the root of the source
  *  tree. An additional intellectual property rights grant can be found
  *  in the file PATENTS.  All contributing project authors may
  *  be found in the AUTHORS file in the root of the source tree.
  */
 
@@ skipping 13 matching lines @@
 #define VP8CX_H
 #include "vpx_codec_impl_top.h"
 
 /*!\name Algorithm interface for VP8
  *
  * This interface provides the capability to encode raw VP8 streams, as would
  * be found in AVI files.
  * @{
  */
 extern vpx_codec_iface_t  vpx_codec_vp8_cx_algo;
-extern vpx_codec_iface_t* vpx_codec_vp8_cx(void);
+extern vpx_codec_iface_t *vpx_codec_vp8_cx(void);
+
+/* TODO(jkoleszar): These move to VP9 in a later patch set. */
+extern vpx_codec_iface_t  vpx_codec_vp9_cx_algo;
+extern vpx_codec_iface_t *vpx_codec_vp9_cx(void);
+extern vpx_codec_iface_t  vpx_codec_vp9x_cx_algo;
+extern vpx_codec_iface_t *vpx_codec_vp9x_cx(void);
+
 /*!@} - end algorithm interface member group*/
 
 
 /*
  * Algorithm Flags
  */
 
 /*!\brief Don't reference the last frame
  *
  * When this flag is set, the encoder will not use the last frame as a
@@ skipping 69 matching lines @@
 #define VP8_EFLAG_NO_UPD_ENTROPY   (1<<20)
 
 
 /*!\brief VP8 encoder control functions
  *
  * This set of macros define the control functions available for the VP8
  * encoder interface.
  *
  * \sa #vpx_codec_control
  */
-enum vp8e_enc_control_id
-{
-    VP8E_UPD_ENTROPY           = 5,  /**< control function to set mode of entropy update in encoder */
-    VP8E_UPD_REFERENCE,              /**< control function to set reference update mode in encoder */
-    VP8E_USE_REFERENCE,              /**< control function to set which reference frame encoder can use */
-    VP8E_SET_ROI_MAP,                /**< control function to pass an ROI map to encoder */
-    VP8E_SET_ACTIVEMAP,              /**< control function to pass an Active map to encoder */
-    VP8E_SET_SCALEMODE         = 11, /**< control function to set encoder scaling mode */
-    /*!\brief control function to set vp8 encoder cpuused
-     *
-     * Changes in this value influences, among others, the encoder's selection
-     * of motion estimation methods. Values greater than 0 will increase encoder
-     * speed at the expense of quality.
-     * The full set of adjustments can be found in
-     * onyx_if.c:vp8_set_speed_features().
-     * \todo List highlights of the changes at various levels.
-     *
-     * \note Valid range: -16..16
-     */
-    VP8E_SET_CPUUSED           = 13,
-    VP8E_SET_ENABLEAUTOALTREF,       /**< control function to enable vp8 to automatic set and use altref frame */
-    VP8E_SET_NOISE_SENSITIVITY,      /**< control function to set noise sensitivity */
-    VP8E_SET_SHARPNESS,              /**< control function to set sharpness */
-    VP8E_SET_STATIC_THRESHOLD,       /**< control function to set the threshold for macroblocks treated static */
-    VP8E_SET_TOKEN_PARTITIONS,       /**< control function to set the number of token partitions  */
-    VP8E_GET_LAST_QUANTIZER,         /**< return the quantizer chosen by the
+enum vp8e_enc_control_id {
+  VP8E_UPD_ENTROPY           = 5,  /**< control function to set mode of entropy update in encoder */
+  VP8E_UPD_REFERENCE,              /**< control function to set reference update mode in encoder */
+  VP8E_USE_REFERENCE,              /**< control function to set which reference frame encoder can use */
+  VP8E_SET_ROI_MAP,                /**< control function to pass an ROI map to encoder */
+  VP8E_SET_ACTIVEMAP,              /**< control function to pass an Active map to encoder */
+  VP8E_SET_SCALEMODE         = 11, /**< control function to set encoder scaling mode */
+  /*!\brief control function to set vp8 encoder cpuused
+   *
+   * Changes in this value influences, among others, the encoder's selection
+   * of motion estimation methods. Values greater than 0 will increase encoder
+   * speed at the expense of quality.
+   * The full set of adjustments can be found in
+   * onyx_if.c:vp8_set_speed_features().
+   * \todo List highlights of the changes at various levels.
+   *
+   * \note Valid range: -16..16
+   */
+  VP8E_SET_CPUUSED           = 13,
+  VP8E_SET_ENABLEAUTOALTREF,       /**< control function to enable vp8 to automatic set and use altref frame */
+  VP8E_SET_NOISE_SENSITIVITY,      /**< control function to set noise sensitivity */
+  VP8E_SET_SHARPNESS,              /**< control function to set sharpness */
+  VP8E_SET_STATIC_THRESHOLD,       /**< control function to set the threshold for macroblocks treated static */
+  VP8E_SET_TOKEN_PARTITIONS,       /**< control function to set the number of token partitions  */
+  VP8E_GET_LAST_QUANTIZER,         /**< return the quantizer chosen by the
                                           encoder for the last frame using the internal
                                           scale */
-    VP8E_GET_LAST_QUANTIZER_64,      /**< return the quantizer chosen by the
+  VP8E_GET_LAST_QUANTIZER_64,      /**< return the quantizer chosen by the
                                           encoder for the last frame, using the 0..63
                                           scale as used by the rc_*_quantizer config
                                           parameters */
-    VP8E_SET_ARNR_MAXFRAMES,         /**< control function to set the max number of frames blurred creating arf*/
-    VP8E_SET_ARNR_STRENGTH ,         /**< control function to set the filter strength for the arf */
-    VP8E_SET_ARNR_TYPE     ,         /**< control function to set the type of filter to use for the arf*/
-    VP8E_SET_TUNING,                 /**< control function to set visual tuning */
-    /*!\brief control function to set constrained quality level
-     *
-     * \attention For this value to be used vpx_codec_enc_cfg_t::g_usage must be
-     *            set to #VPX_CQ.
-     * \note Valid range: 0..63
-     */
-    VP8E_SET_CQ_LEVEL,
+  VP8E_SET_ARNR_MAXFRAMES,         /**< control function to set the max number of frames blurred creating arf*/
+  VP8E_SET_ARNR_STRENGTH,         /**< control function to set the filter strength for the arf */
+  VP8E_SET_ARNR_TYPE,         /**< control function to set the type of filter to use for the arf*/
+  VP8E_SET_TUNING,                 /**< control function to set visual tuning */
+  /*!\brief control function to set constrained quality level
+   *
+   * \attention For this value to be used vpx_codec_enc_cfg_t::g_usage must be
+   *            set to #VPX_CQ.
+   * \note Valid range: 0..63
+   */
+  VP8E_SET_CQ_LEVEL,
 
-    /*!\brief Max data rate for Intra frames
-     *
-     * This value controls additional clamping on the maximum size of a
-     * keyframe. It is expressed as a percentage of the average
-     * per-frame bitrate, with the special (and default) value 0 meaning
-     * unlimited, or no additional clamping beyond the codec's built-in
-     * algorithm.
-     *
-     * For example, to allocate no more than 4.5 frames worth of bitrate
-     * to a keyframe, set this to 450.
-     *
-     */
-    VP8E_SET_MAX_INTRA_BITRATE_PCT
+  /*!\brief Max data rate for Intra frames
+   *
+   * This value controls additional clamping on the maximum size of a
+   * keyframe. It is expressed as a percentage of the average
+   * per-frame bitrate, with the special (and default) value 0 meaning
+   * unlimited, or no additional clamping beyond the codec's built-in
+   * algorithm.
+   *
+   * For example, to allocate no more than 4.5 frames worth of bitrate
+   * to a keyframe, set this to 450.
+   *
+   */
+  VP8E_SET_MAX_INTRA_BITRATE_PCT,
+
+
+  /* TODO(jkoleszar): Move to vp9cx.h */
+  VP9E_SET_LOSSLESS
 };
 
 /*!\brief vpx 1-D scaling mode
  *
  * This set of constants define 1-D vpx scaling modes
  */
-typedef enum vpx_scaling_mode_1d
-{
-    VP8E_NORMAL      = 0,
-    VP8E_FOURFIVE    = 1,
-    VP8E_THREEFIVE   = 2,
-    VP8E_ONETWO      = 3
+typedef enum vpx_scaling_mode_1d {
+  VP8E_NORMAL      = 0,
+  VP8E_FOURFIVE    = 1,
+  VP8E_THREEFIVE   = 2,
+  VP8E_ONETWO      = 3
 } VPX_SCALING_MODE;
 
 
 /*!\brief  vpx region of interest map
  *
  * These defines the data structures for the region of interest map
  *
  */
 
-typedef struct vpx_roi_map
-{
-    unsigned char *roi_map;      /**< specify an id between 0 and 3 for each 16x16 region within a frame */
-    unsigned int   rows;         /**< number of rows */
-    unsigned int   cols;         /**< number of cols */
-    int     delta_q[4];          /**< quantizer delta [-63, 63] off baseline for regions with id between 0 and 3*/
-    int     delta_lf[4];         /**< loop filter strength delta [-63, 63] for regions with id between 0 and 3 */
-    unsigned int   static_threshold[4];/**< threshold for region to be treated as static */
+typedef struct vpx_roi_map {
+  unsigned char *roi_map;      /**< specify an id between 0 and 3 for each 16x16 region within a frame */
+  unsigned int   rows;         /**< number of rows */
+  unsigned int   cols;         /**< number of cols */
+  int     delta_q[4];          /**< quantizer delta [-63, 63] off baseline for regions with id between 0 and 3*/
+  int     delta_lf[4];         /**< loop filter strength delta [-63, 63] for regions with id between 0 and 3 */
+  unsigned int   static_threshold[4];/**< threshold for region to be treated as static */
 } vpx_roi_map_t;
 
 /*!\brief  vpx active region map
  *
  * These defines the data structures for active region map
  *
  */
 
 
-typedef struct vpx_active_map
-{
-    unsigned char  *active_map; /**< specify an on (1) or off (0) each 16x16 region within a frame */
-    unsigned int    rows;       /**< number of rows */
-    unsigned int    cols;       /**< number of cols */
+typedef struct vpx_active_map {
+  unsigned char  *active_map; /**< specify an on (1) or off (0) each 16x16 region within a frame */
+  unsigned int    rows;       /**< number of rows */
+  unsigned int    cols;       /**< number of cols */
 } vpx_active_map_t;
 
 /*!\brief  vpx image scaling mode
  *
  * This defines the data structure for image scaling mode
  *
  */
-typedef struct vpx_scaling_mode
-{
-    VPX_SCALING_MODE    h_scaling_mode;  /**< horizontal scaling mode */
-    VPX_SCALING_MODE    v_scaling_mode;  /**< vertical scaling mode   */
+typedef struct vpx_scaling_mode {
+  VPX_SCALING_MODE    h_scaling_mode;  /**< horizontal scaling mode */
+  VPX_SCALING_MODE    v_scaling_mode;  /**< vertical scaling mode   */
 } vpx_scaling_mode_t;
 
 /*!\brief VP8 token partition mode
  *
  * This defines VP8 partitioning mode for compressed data, i.e., the number of
  * sub-streams in the bitstream. Used for parallelized decoding.
  *
  */
 
-typedef enum
-{
-    VP8_ONE_TOKENPARTITION   = 0,
-    VP8_TWO_TOKENPARTITION   = 1,
-    VP8_FOUR_TOKENPARTITION  = 2,
-    VP8_EIGHT_TOKENPARTITION = 3
+typedef enum {
+  VP8_ONE_TOKENPARTITION   = 0,
+  VP8_TWO_TOKENPARTITION   = 1,
+  VP8_FOUR_TOKENPARTITION  = 2,
+  VP8_EIGHT_TOKENPARTITION = 3
 } vp8e_token_partitions;
 
 
 /*!\brief VP8 model tuning parameters
  *
  * Changes the encoder to tune for certain types of input material.
  *
  */
-typedef enum
-{
-    VP8_TUNE_PSNR,
-    VP8_TUNE_SSIM
+typedef enum {
+  VP8_TUNE_PSNR,
+  VP8_TUNE_SSIM
 } vp8e_tuning;
 
 
 /*!\brief VP8 encoder control function parameter type
  *
  * Defines the data types that VP8E control functions take. Note that
  * additional common controls are defined in vp8.h
  *
  */
 
@@ skipping 10 matching lines @@
 VPX_CTRL_USE_TYPE(VP8E_SET_SCALEMODE,          vpx_scaling_mode_t *)
 
 VPX_CTRL_USE_TYPE(VP8E_SET_CPUUSED,            int)
 VPX_CTRL_USE_TYPE(VP8E_SET_ENABLEAUTOALTREF,   unsigned int)
 VPX_CTRL_USE_TYPE(VP8E_SET_NOISE_SENSITIVITY,  unsigned int)
 VPX_CTRL_USE_TYPE(VP8E_SET_SHARPNESS,          unsigned int)
 VPX_CTRL_USE_TYPE(VP8E_SET_STATIC_THRESHOLD,   unsigned int)
 VPX_CTRL_USE_TYPE(VP8E_SET_TOKEN_PARTITIONS,   int) /* vp8e_token_partitions */
 
 VPX_CTRL_USE_TYPE(VP8E_SET_ARNR_MAXFRAMES,     unsigned int)
-VPX_CTRL_USE_TYPE(VP8E_SET_ARNR_STRENGTH ,     unsigned int)
-VPX_CTRL_USE_TYPE(VP8E_SET_ARNR_TYPE     ,     unsigned int)
+VPX_CTRL_USE_TYPE(VP8E_SET_ARNR_STRENGTH,     unsigned int)
+VPX_CTRL_USE_TYPE(VP8E_SET_ARNR_TYPE,     unsigned int)
 VPX_CTRL_USE_TYPE(VP8E_SET_TUNING,             int) /* vp8e_tuning */
-VPX_CTRL_USE_TYPE(VP8E_SET_CQ_LEVEL     ,      unsigned int)
+VPX_CTRL_USE_TYPE(VP8E_SET_CQ_LEVEL,      unsigned int)
 
 VPX_CTRL_USE_TYPE(VP8E_GET_LAST_QUANTIZER,     int *)
 VPX_CTRL_USE_TYPE(VP8E_GET_LAST_QUANTIZER_64,  int *)
 
 VPX_CTRL_USE_TYPE(VP8E_SET_MAX_INTRA_BITRATE_PCT, unsigned int)
 
+VPX_CTRL_USE_TYPE(VP9E_SET_LOSSLESS, unsigned int)
 
 /*! @} - end defgroup vp8_encoder */
 #include "vpx_codec_impl_bottom.h"
 #endif