dm changes

dm/DMSrcSink.cpp

 /*
  * Copyright 2015 Google Inc.
  *
  * Use of this source code is governed by a BSD-style license that can be
  * found in the LICENSE file.
  */
 
 #include "DMSrcSink.h"
 #include "SamplePipeControllers.h"
 #include "SkCodec.h"
@@ skipping 123 matching lines @@
                     // We consider incomplete to be valid, since we should still decode what is
                     // available.
                 case SkImageGenerator::kIncompleteInput:
                     break;
                 case SkImageGenerator::kInvalidConversion:
                     return Error::Nonfatal("Incompatible colortype conversion");
                 default:
                     // Everything else is considered a failure.
                     return SkStringPrintf("Couldn't getPixels %s.", fPath.c_str());
             }
+            canvas->drawBitmap(bitmap, 0, 0);
             break;
         case kScanline_Mode: {
             SkScanlineDecoder* scanlineDecoder = codec->getScanlineDecoder(decodeInfo, NULL,
                     colorPtr, colorCountPtr);
             if (NULL == scanlineDecoder) {
                 return Error::Nonfatal("Cannot use scanline decoder for all images");
             }
             for (int y = 0; y < decodeInfo.height(); ++y) {
                 const SkImageGenerator::Result result = scanlineDecoder->getScanlines(
                         bitmap.getAddr(0, y), 1, 0);
                 switch (result) {
                     case SkImageGenerator::kSuccess:
                     case SkImageGenerator::kIncompleteInput:
                         break;
                     default:
                         return SkStringPrintf("%s failed after %d scanlines with error message %d",
                                               fPath.c_str(), y-1, (int) result);
                 }
             }
+            canvas->drawBitmap(bitmap, 0, 0);
+            break;
+        }
+        case kScanline_Subset_Mode: {
+            //this mode decodes the image in divisor*divisor subsets, using a scanline decoder  
+            const int divisor = 2;
+            const int w = decodeInfo.width();
+            const int h = decodeInfo.height();
+            if (divisor > w || divisor > h) {
+                return SkStringPrintf("divisor %d is too big for %s with dimensions (%d x %d)",
+                        divisor, fPath.c_str(), w, h);
+            }
+            const int subsetWidth = w/divisor;
+            const int subsetHeight = h/divisor;
+            /*
+            * if w or h are not evenly divided by divisor need to adjust width and height of end 
+            * subsets to cover entire image.
+            * Add w%divisor and h%divisor to largestSubsetBm's width and height to adjust width 
+            * and height of end subsets.
+            * subsetBm is extracted from largestSubsetBm. 
+            * subsetBm's size is determined based on the current subset and may be larger for end 
+            * subsets. 
+            */
+            SkImageInfo largestSubsetDecodeInfo = 
+                    decodeInfo.makeWH(subsetWidth + w%divisor, subsetHeight + h%divisor);
+            SkBitmap largestSubsetBm;
+            if (!largestSubsetBm.tryAllocPixels(largestSubsetDecodeInfo, NULL, colorTable.get())) {
+                return SkStringPrintf("Image(%s) is too large (%d x %d)\n", fPath.c_str(),
+                        largestSubsetDecodeInfo.width(), largestSubsetDecodeInfo.height());
+            }
+            char* line = SkNEW_ARRAY(char, decodeInfo.minRowBytes());
+            SkAutoTDeleteArray<char> lineDeleter(line);
+            for (int x = 0; x < subsetWidth*divisor; x += subsetWidth) {
+                //currentSubsetWidth may be larger than subsetWidth for rightmost subsets 
+                int currentSubsetWidth;
+                if (x + 2*subsetWidth > w) {

[msarett, 2015/05/22 17:42:19]

Is there another way to check for the end subset?

This does not work for strange cases that will probably never come up.  Ex:
width = 10, divisor = 7.

Maybe there is an option to loop over the value of the divisor or something?

[scroggo, 2015/05/22 18:39:54]

I agree that this seems a little clunky. I think it would always work if it
instead said something like

if (x + 2*subsetWidth > subsetWidth*divisor)

which is even clunkier...

+1 to trying using a loop over divisor.

[scroggo, 2015/05/26 14:09:34]

I still find this loop a little clunky. What if we did something like the
following:

for (int col = 0; col < divisor; col++) {
  const int currentSubsetWidth = (col + 1 == divisor) ?
      subsetWidth + w % divisor : subsetWidth;
  const int x = col * subsetWidth;
  ...
  // Similar for y
}

+                    currentSubsetWidth = subsetWidth + w - subsetWidth*divisor;

[msarett, 2015/05/22 17:42:19]

nit: Can this be w%divisor?  Can we reuse the value from above?

[scroggo, 2015/05/26 14:09:34]

The thing I did not like about it was that it was a variable which was always
added, but it was sometimes 0 and sometimes w % divisor. I think it would be
fine it if was a constant that was added when needed:

// One of our subsets will be larger to contain any pixels that
// do not divide evenly.
const int extraX = w % divisor;
const int extraY = h % divisor;

SkImageInfo largestSubsetDecodeInfo = decodeInfo.makeWH(
  subsetWidth + extraX, subsetHeight + extraY);
...
for (int col = 0; col < divisor; col++) {
  const int currentSubsetWidth = (col + 1 == divisor) ?
      subsetWidth + extraX : subsetWidth;
  const int x = col * subsetWidth;
  ...
  // Similar for y
}

[emmaleer, 2015/05/26 19:15:04]

Acknowledged.

+                } else {
+                    currentSubsetWidth = subsetWidth;
+                }        
+                for (int y = 0; y < subsetHeight*divisor; y += subsetHeight) {
+                    //currentSubsetHeight may be larger than subsetHeight for bottom subsets 
+                    int currentSubsetHeight;
+                    if (y + 2*subsetHeight > h) {
+                        currentSubsetHeight = subsetHeight + h - subsetHeight*divisor;

[msarett, 2015/05/22 17:42:18]

nit: Can this be h%divisor?  Can we reuse the value from above?

+                    } else {
+                        currentSubsetHeight = subsetHeight;
+                    }
+                    //create scanline decoder for each subset
+                    SkScanlineDecoder* subsetScanlineDecoder = codec->getScanlineDecoder(decodeInfo, 
+                            NULL, colorPtr, colorCountPtr);
+                    if (NULL == subsetScanlineDecoder) {
+                        if (x == 0 && y == 0) {
+                            //first try, image may not be compatible 
+                            return Error::Nonfatal("Cannot use scanline decoder for all images");
+                        } else {
+                            return "Error scanline decoder is NULL";
+                        }
+                    }
+                    //skip to first line of subset
+                    const SkImageGenerator::Result skipResult = 
+                            subsetScanlineDecoder->skipScanlines(y);
+                    switch (skipResult) {
+                        case SkImageGenerator::kSuccess:
+                        case SkImageGenerator::kIncompleteInput:
+                            break;
+                        default:
+                            return SkStringPrintf("%s failed after attempting to skip %d scanlines"
+                                    "with error message %d", fPath.c_str(), y, (int) skipResult);
+                    }
+                    //create and set size of subsetBm
+                    SkBitmap subsetBm;
+                    SkIRect bounds = SkIRect::MakeWH(subsetWidth, subsetHeight);
+                    bounds.setXYWH(0, 0, currentSubsetWidth, currentSubsetHeight);
+                    SkAssertResult(largestSubsetBm.extractSubset(&subsetBm, bounds));
+                    SkAutoLockPixels autlockSubsetBm(subsetBm, true);
+                    for (int subsetY = 0; subsetY < currentSubsetHeight; ++subsetY) {
+                        const SkImageGenerator::Result subsetResult = 
+                                subsetScanlineDecoder->getScanlines(line, 1, 0);
+                        const size_t bpp = decodeInfo.bytesPerPixel(); 
+                        //copy section of line based on x value   
+                        memcpy(subsetBm.getAddr(0, subsetY), line + x*bpp, currentSubsetWidth*bpp);
+                        switch (subsetResult) {
+                            case SkImageGenerator::kSuccess:
+                            case SkImageGenerator::kIncompleteInput:
+                                break;
+                            default:
+                                return SkStringPrintf("%s failed after %d scanlines with error" 
+                                        "message %d", fPath.c_str(), y-1, (int) subsetResult);
+                        }
+                    }
+                    canvas->drawBitmap(subsetBm, x, y);
+                }
+            }
             break;
         }
     }
-    canvas->drawBitmap(bitmap, 0, 0);
     return "";
 }
 
 SkISize CodecSrc::size() const {
     SkAutoTUnref<SkData> encoded(SkData::NewFromFileName(fPath.c_str()));
     SkAutoTDelete<SkCodec> codec(SkCodec::NewFromData(encoded));
     if (NULL != codec) {
         return codec->getInfo().dimensions();
     } else {
         return SkISize::Make(0, 0);
@@ skipping 603 matching lines @@
             skr.visit<void>(i, drawsAsSingletonPictures);
         }
         SkAutoTUnref<SkPicture> macroPic(macroRec.endRecordingAsPicture());
 
         canvas->drawPicture(macroPic);
         return "";
     });
 }
 
 }  // namespace DM