Introduce (private) ZLibFilter to dart:io.

runtime/third_party/zlib/inffast.c

Index: runtime/third_party/zlib/inffast.c
diff --git a/runtime/third_party/zlib/inffast.c b/runtime/third_party/zlib/inffast.c
new file mode 100644
index 0000000000000000000000000000000000000000..2f1d60b43b8a9deacf22bb5526a979dcc219a68f
--- /dev/null
+++ b/runtime/third_party/zlib/inffast.c
@@ -0,0 +1,340 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2008, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+   Based on testing to date,
+   Pre-increment preferred for:
+   - PowerPC G3 (Adler)
+   - MIPS R5000 (Randers-Pehrson)
+   Post-increment preferred for:
+   - none
+   No measurable difference:
+   - Pentium III (Anderson)
+   - M68060 (Nikl)
+ */
+#ifdef POSTINC
+#  define OFF 0
+#  define PUP(a) *(a)++
+#else
+#  define OFF 1
+#  define PUP(a) *++(a)
+#endif
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+void ZLIB_INTERNAL inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    unsigned char FAR *in;      /* local strm->next_in */
+    unsigned char FAR *last;    /* while in < last, enough input available */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code here;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in - OFF;
+    last = in + (strm->avail_in - 5);
+    out = strm->next_out - OFF;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    wnext = state->wnext;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+    do {
+        if (bits < 15) {
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+        }
+        here = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(here.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(here.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", here.val));
+            PUP(out) = (unsigned char)(here.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(here.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+            }
+            here = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(here.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(here.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(here.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(PUP(in)) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        if (state->sane) {
+                            strm->msg =
+                                (char *)"invalid distance too far back";
+                            state->mode = BAD;
+                            break;
+                        }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        if (len <= op - whave) {
+                            do {
+                                PUP(out) = 0;
+                            } while (--len);
+                            continue;
+                        }
+                        len -= op - whave;
+                        do {
+                            PUP(out) = 0;
+                        } while (--op > whave);
+                        if (op == 0) {
+                            from = out - dist;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--len);
+                            continue;
+                        }
+#endif
+                    }
+                    from = window - OFF;
+                    if (wnext == 0) {           /* very common case */
+                        from += wsize - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    else if (wnext < op) {      /* wrap around window */
+                        from += wsize + wnext - op;
+                        op -= wnext;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = window - OFF;
+                            if (wnext < len) {  /* some from start of window */
+                                op = wnext;
+                                len -= op;
+                                do {
+                                    PUP(out) = PUP(from);
+                                } while (--op);
+                                from = out - dist;      /* rest from output */
+                            }
+                        }
+                    }
+                    else {                      /* contiguous in window */
+                        from += wnext - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    while (len > 2) {
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    }
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+                else {
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    } while (len > 2);
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                here = dcode[here.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            here = lcode[here.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in + OFF;
+    strm->next_out = out + OFF;
+    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+                                 257 + (end - out) : 257 - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
+}
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and wnext == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */