| OLD | NEW |
| (Empty) | |
| 1 /* deflate.c -- compress data using the deflation algorithm |
| 2 * Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler |
| 3 * For conditions of distribution and use, see copyright notice in zlib.h |
| 4 */ |
| 5 |
| 6 /* |
| 7 * ALGORITHM |
| 8 * |
| 9 * The "deflation" process depends on being able to identify portions |
| 10 * of the input text which are identical to earlier input (within a |
| 11 * sliding window trailing behind the input currently being processed). |
| 12 * |
| 13 * The most straightforward technique turns out to be the fastest for |
| 14 * most input files: try all possible matches and select the longest. |
| 15 * The key feature of this algorithm is that insertions into the string |
| 16 * dictionary are very simple and thus fast, and deletions are avoided |
| 17 * completely. Insertions are performed at each input character, whereas |
| 18 * string matches are performed only when the previous match ends. So it |
| 19 * is preferable to spend more time in matches to allow very fast string |
| 20 * insertions and avoid deletions. The matching algorithm for small |
| 21 * strings is inspired from that of Rabin & Karp. A brute force approach |
| 22 * is used to find longer strings when a small match has been found. |
| 23 * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze |
| 24 * (by Leonid Broukhis). |
| 25 * A previous version of this file used a more sophisticated algorithm |
| 26 * (by Fiala and Greene) which is guaranteed to run in linear amortized |
| 27 * time, but has a larger average cost, uses more memory and is patented. |
| 28 * However the F&G algorithm may be faster for some highly redundant |
| 29 * files if the parameter max_chain_length (described below) is too large. |
| 30 * |
| 31 * ACKNOWLEDGEMENTS |
| 32 * |
| 33 * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and |
| 34 * I found it in 'freeze' written by Leonid Broukhis. |
| 35 * Thanks to many people for bug reports and testing. |
| 36 * |
| 37 * REFERENCES |
| 38 * |
| 39 * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". |
| 40 * Available in http://tools.ietf.org/html/rfc1951 |
| 41 * |
| 42 * A description of the Rabin and Karp algorithm is given in the book |
| 43 * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. |
| 44 * |
| 45 * Fiala,E.R., and Greene,D.H. |
| 46 * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 |
| 47 * |
| 48 */ |
| 49 |
| 50 /* @(#) $Id$ */ |
| 51 |
| 52 #include "deflate.h" |
| 53 |
| 54 const char deflate_copyright[] = |
| 55 " deflate 1.2.7 Copyright 1995-2012 Jean-loup Gailly and Mark Adler "; |
| 56 /* |
| 57 If you use the zlib library in a product, an acknowledgment is welcome |
| 58 in the documentation of your product. If for some reason you cannot |
| 59 include such an acknowledgment, I would appreciate that you keep this |
| 60 copyright string in the executable of your product. |
| 61 */ |
| 62 |
| 63 /* =========================================================================== |
| 64 * Function prototypes. |
| 65 */ |
| 66 typedef enum { |
| 67 need_more, /* block not completed, need more input or more output */ |
| 68 block_done, /* block flush performed */ |
| 69 finish_started, /* finish started, need only more output at next deflate */ |
| 70 finish_done /* finish done, accept no more input or output */ |
| 71 } block_state; |
| 72 |
| 73 typedef block_state (*compress_func) OF((deflate_state *s, int flush)); |
| 74 /* Compression function. Returns the block state after the call. */ |
| 75 |
| 76 local void fill_window OF((deflate_state *s)); |
| 77 local block_state deflate_stored OF((deflate_state *s, int flush)); |
| 78 local block_state deflate_fast OF((deflate_state *s, int flush)); |
| 79 #ifndef FASTEST |
| 80 local block_state deflate_slow OF((deflate_state *s, int flush)); |
| 81 #endif |
| 82 local block_state deflate_rle OF((deflate_state *s, int flush)); |
| 83 local block_state deflate_huff OF((deflate_state *s, int flush)); |
| 84 local void lm_init OF((deflate_state *s)); |
| 85 local void putShortMSB OF((deflate_state *s, uInt b)); |
| 86 local void flush_pending OF((z_streamp strm)); |
| 87 local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); |
| 88 #ifdef ASMV |
| 89 void match_init OF((void)); /* asm code initialization */ |
| 90 uInt longest_match OF((deflate_state *s, IPos cur_match)); |
| 91 #else |
| 92 local uInt longest_match OF((deflate_state *s, IPos cur_match)); |
| 93 #endif |
| 94 |
| 95 #ifdef DEBUG |
| 96 local void check_match OF((deflate_state *s, IPos start, IPos match, |
| 97 int length)); |
| 98 #endif |
| 99 |
| 100 /* =========================================================================== |
| 101 * Local data |
| 102 */ |
| 103 |
| 104 #define NIL 0 |
| 105 /* Tail of hash chains */ |
| 106 |
| 107 #ifndef TOO_FAR |
| 108 # define TOO_FAR 4096 |
| 109 #endif |
| 110 /* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ |
| 111 |
| 112 /* Values for max_lazy_match, good_match and max_chain_length, depending on |
| 113 * the desired pack level (0..9). The values given below have been tuned to |
| 114 * exclude worst case performance for pathological files. Better values may be |
| 115 * found for specific files. |
| 116 */ |
| 117 typedef struct config_s { |
| 118 ush good_length; /* reduce lazy search above this match length */ |
| 119 ush max_lazy; /* do not perform lazy search above this match length */ |
| 120 ush nice_length; /* quit search above this match length */ |
| 121 ush max_chain; |
| 122 compress_func func; |
| 123 } config; |
| 124 |
| 125 #ifdef FASTEST |
| 126 local const config configuration_table[2] = { |
| 127 /* good lazy nice chain */ |
| 128 /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ |
| 129 /* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ |
| 130 #else |
| 131 local const config configuration_table[10] = { |
| 132 /* good lazy nice chain */ |
| 133 /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ |
| 134 /* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ |
| 135 /* 2 */ {4, 5, 16, 8, deflate_fast}, |
| 136 /* 3 */ {4, 6, 32, 32, deflate_fast}, |
| 137 |
| 138 /* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ |
| 139 /* 5 */ {8, 16, 32, 32, deflate_slow}, |
| 140 /* 6 */ {8, 16, 128, 128, deflate_slow}, |
| 141 /* 7 */ {8, 32, 128, 256, deflate_slow}, |
| 142 /* 8 */ {32, 128, 258, 1024, deflate_slow}, |
| 143 /* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ |
| 144 #endif |
| 145 |
| 146 /* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 |
| 147 * For deflate_fast() (levels <= 3) good is ignored and lazy has a different |
| 148 * meaning. |
| 149 */ |
| 150 |
| 151 #define EQUAL 0 |
| 152 /* result of memcmp for equal strings */ |
| 153 |
| 154 #ifndef NO_DUMMY_DECL |
| 155 struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ |
| 156 #endif |
| 157 |
| 158 /* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */ |
| 159 #define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0)) |
| 160 |
| 161 /* =========================================================================== |
| 162 * Update a hash value with the given input byte |
| 163 * IN assertion: all calls to to UPDATE_HASH are made with consecutive |
| 164 * input characters, so that a running hash key can be computed from the |
| 165 * previous key instead of complete recalculation each time. |
| 166 */ |
| 167 #define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask) |
| 168 |
| 169 |
| 170 /* =========================================================================== |
| 171 * Insert string str in the dictionary and set match_head to the previous head |
| 172 * of the hash chain (the most recent string with same hash key). Return |
| 173 * the previous length of the hash chain. |
| 174 * If this file is compiled with -DFASTEST, the compression level is forced |
| 175 * to 1, and no hash chains are maintained. |
| 176 * IN assertion: all calls to to INSERT_STRING are made with consecutive |
| 177 * input characters and the first MIN_MATCH bytes of str are valid |
| 178 * (except for the last MIN_MATCH-1 bytes of the input file). |
| 179 */ |
| 180 #ifdef FASTEST |
| 181 #define INSERT_STRING(s, str, match_head) \ |
| 182 (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ |
| 183 match_head = s->head[s->ins_h], \ |
| 184 s->head[s->ins_h] = (Pos)(str)) |
| 185 #else |
| 186 #define INSERT_STRING(s, str, match_head) \ |
| 187 (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ |
| 188 match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ |
| 189 s->head[s->ins_h] = (Pos)(str)) |
| 190 #endif |
| 191 |
| 192 /* =========================================================================== |
| 193 * Initialize the hash table (avoiding 64K overflow for 16 bit systems). |
| 194 * prev[] will be initialized on the fly. |
| 195 */ |
| 196 #define CLEAR_HASH(s) \ |
| 197 s->head[s->hash_size-1] = NIL; \ |
| 198 zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); |
| 199 |
| 200 /* ========================================================================= */ |
| 201 int ZEXPORT deflateInit_(strm, level, version, stream_size) |
| 202 z_streamp strm; |
| 203 int level; |
| 204 const char *version; |
| 205 int stream_size; |
| 206 { |
| 207 return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, |
| 208 Z_DEFAULT_STRATEGY, version, stream_size); |
| 209 /* To do: ignore strm->next_in if we use it as window */ |
| 210 } |
| 211 |
| 212 /* ========================================================================= */ |
| 213 int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, |
| 214 version, stream_size) |
| 215 z_streamp strm; |
| 216 int level; |
| 217 int method; |
| 218 int windowBits; |
| 219 int memLevel; |
| 220 int strategy; |
| 221 const char *version; |
| 222 int stream_size; |
| 223 { |
| 224 deflate_state *s; |
| 225 int wrap = 1; |
| 226 static const char my_version[] = ZLIB_VERSION; |
| 227 |
| 228 ushf *overlay; |
| 229 /* We overlay pending_buf and d_buf+l_buf. This works since the average |
| 230 * output size for (length,distance) codes is <= 24 bits. |
| 231 */ |
| 232 |
| 233 if (version == Z_NULL || version[0] != my_version[0] || |
| 234 stream_size != sizeof(z_stream)) { |
| 235 return Z_VERSION_ERROR; |
| 236 } |
| 237 if (strm == Z_NULL) return Z_STREAM_ERROR; |
| 238 |
| 239 strm->msg = Z_NULL; |
| 240 if (strm->zalloc == (alloc_func)0) { |
| 241 #ifdef Z_SOLO |
| 242 return Z_STREAM_ERROR; |
| 243 #else |
| 244 strm->zalloc = zcalloc; |
| 245 strm->opaque = (voidpf)0; |
| 246 #endif |
| 247 } |
| 248 if (strm->zfree == (free_func)0) |
| 249 #ifdef Z_SOLO |
| 250 return Z_STREAM_ERROR; |
| 251 #else |
| 252 strm->zfree = zcfree; |
| 253 #endif |
| 254 |
| 255 #ifdef FASTEST |
| 256 if (level != 0) level = 1; |
| 257 #else |
| 258 if (level == Z_DEFAULT_COMPRESSION) level = 6; |
| 259 #endif |
| 260 |
| 261 if (windowBits < 0) { /* suppress zlib wrapper */ |
| 262 wrap = 0; |
| 263 windowBits = -windowBits; |
| 264 } |
| 265 #ifdef GZIP |
| 266 else if (windowBits > 15) { |
| 267 wrap = 2; /* write gzip wrapper instead */ |
| 268 windowBits -= 16; |
| 269 } |
| 270 #endif |
| 271 if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || |
| 272 windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || |
| 273 strategy < 0 || strategy > Z_FIXED) { |
| 274 return Z_STREAM_ERROR; |
| 275 } |
| 276 if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ |
| 277 s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); |
| 278 if (s == Z_NULL) return Z_MEM_ERROR; |
| 279 strm->state = (struct internal_state FAR *)s; |
| 280 s->strm = strm; |
| 281 |
| 282 s->wrap = wrap; |
| 283 s->gzhead = Z_NULL; |
| 284 s->w_bits = windowBits; |
| 285 s->w_size = 1 << s->w_bits; |
| 286 s->w_mask = s->w_size - 1; |
| 287 |
| 288 s->hash_bits = memLevel + 7; |
| 289 s->hash_size = 1 << s->hash_bits; |
| 290 s->hash_mask = s->hash_size - 1; |
| 291 s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); |
| 292 |
| 293 s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); |
| 294 s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); |
| 295 s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); |
| 296 |
| 297 s->high_water = 0; /* nothing written to s->window yet */ |
| 298 |
| 299 s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ |
| 300 |
| 301 overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); |
| 302 s->pending_buf = (uchf *) overlay; |
| 303 s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); |
| 304 |
| 305 if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || |
| 306 s->pending_buf == Z_NULL) { |
| 307 s->status = FINISH_STATE; |
| 308 strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); |
| 309 deflateEnd (strm); |
| 310 return Z_MEM_ERROR; |
| 311 } |
| 312 s->d_buf = overlay + s->lit_bufsize/sizeof(ush); |
| 313 s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; |
| 314 |
| 315 s->level = level; |
| 316 s->strategy = strategy; |
| 317 s->method = (Byte)method; |
| 318 |
| 319 return deflateReset(strm); |
| 320 } |
| 321 |
| 322 /* ========================================================================= */ |
| 323 int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) |
| 324 z_streamp strm; |
| 325 const Bytef *dictionary; |
| 326 uInt dictLength; |
| 327 { |
| 328 deflate_state *s; |
| 329 uInt str, n; |
| 330 int wrap; |
| 331 unsigned avail; |
| 332 unsigned char *next; |
| 333 |
| 334 if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL) |
| 335 return Z_STREAM_ERROR; |
| 336 s = strm->state; |
| 337 wrap = s->wrap; |
| 338 if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead) |
| 339 return Z_STREAM_ERROR; |
| 340 |
| 341 /* when using zlib wrappers, compute Adler-32 for provided dictionary */ |
| 342 if (wrap == 1) |
| 343 strm->adler = adler32(strm->adler, dictionary, dictLength); |
| 344 s->wrap = 0; /* avoid computing Adler-32 in read_buf */ |
| 345 |
| 346 /* if dictionary would fill window, just replace the history */ |
| 347 if (dictLength >= s->w_size) { |
| 348 if (wrap == 0) { /* already empty otherwise */ |
| 349 CLEAR_HASH(s); |
| 350 s->strstart = 0; |
| 351 s->block_start = 0L; |
| 352 s->insert = 0; |
| 353 } |
| 354 dictionary += dictLength - s->w_size; /* use the tail */ |
| 355 dictLength = s->w_size; |
| 356 } |
| 357 |
| 358 /* insert dictionary into window and hash */ |
| 359 avail = strm->avail_in; |
| 360 next = strm->next_in; |
| 361 strm->avail_in = dictLength; |
| 362 strm->next_in = (Bytef *)dictionary; |
| 363 fill_window(s); |
| 364 while (s->lookahead >= MIN_MATCH) { |
| 365 str = s->strstart; |
| 366 n = s->lookahead - (MIN_MATCH-1); |
| 367 do { |
| 368 UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); |
| 369 #ifndef FASTEST |
| 370 s->prev[str & s->w_mask] = s->head[s->ins_h]; |
| 371 #endif |
| 372 s->head[s->ins_h] = (Pos)str; |
| 373 str++; |
| 374 } while (--n); |
| 375 s->strstart = str; |
| 376 s->lookahead = MIN_MATCH-1; |
| 377 fill_window(s); |
| 378 } |
| 379 s->strstart += s->lookahead; |
| 380 s->block_start = (long)s->strstart; |
| 381 s->insert = s->lookahead; |
| 382 s->lookahead = 0; |
| 383 s->match_length = s->prev_length = MIN_MATCH-1; |
| 384 s->match_available = 0; |
| 385 strm->next_in = next; |
| 386 strm->avail_in = avail; |
| 387 s->wrap = wrap; |
| 388 return Z_OK; |
| 389 } |
| 390 |
| 391 /* ========================================================================= */ |
| 392 int ZEXPORT deflateResetKeep (strm) |
| 393 z_streamp strm; |
| 394 { |
| 395 deflate_state *s; |
| 396 |
| 397 if (strm == Z_NULL || strm->state == Z_NULL || |
| 398 strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { |
| 399 return Z_STREAM_ERROR; |
| 400 } |
| 401 |
| 402 strm->total_in = strm->total_out = 0; |
| 403 strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ |
| 404 strm->data_type = Z_UNKNOWN; |
| 405 |
| 406 s = (deflate_state *)strm->state; |
| 407 s->pending = 0; |
| 408 s->pending_out = s->pending_buf; |
| 409 |
| 410 if (s->wrap < 0) { |
| 411 s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ |
| 412 } |
| 413 s->status = s->wrap ? INIT_STATE : BUSY_STATE; |
| 414 strm->adler = |
| 415 #ifdef GZIP |
| 416 s->wrap == 2 ? crc32(0L, Z_NULL, 0) : |
| 417 #endif |
| 418 adler32(0L, Z_NULL, 0); |
| 419 s->last_flush = Z_NO_FLUSH; |
| 420 |
| 421 _tr_init(s); |
| 422 |
| 423 return Z_OK; |
| 424 } |
| 425 |
| 426 /* ========================================================================= */ |
| 427 int ZEXPORT deflateReset (strm) |
| 428 z_streamp strm; |
| 429 { |
| 430 int ret; |
| 431 |
| 432 ret = deflateResetKeep(strm); |
| 433 if (ret == Z_OK) |
| 434 lm_init(strm->state); |
| 435 return ret; |
| 436 } |
| 437 |
| 438 /* ========================================================================= */ |
| 439 int ZEXPORT deflateSetHeader (strm, head) |
| 440 z_streamp strm; |
| 441 gz_headerp head; |
| 442 { |
| 443 if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; |
| 444 if (strm->state->wrap != 2) return Z_STREAM_ERROR; |
| 445 strm->state->gzhead = head; |
| 446 return Z_OK; |
| 447 } |
| 448 |
| 449 /* ========================================================================= */ |
| 450 int ZEXPORT deflatePending (strm, pending, bits) |
| 451 unsigned *pending; |
| 452 int *bits; |
| 453 z_streamp strm; |
| 454 { |
| 455 if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; |
| 456 if (pending != Z_NULL) |
| 457 *pending = strm->state->pending; |
| 458 if (bits != Z_NULL) |
| 459 *bits = strm->state->bi_valid; |
| 460 return Z_OK; |
| 461 } |
| 462 |
| 463 /* ========================================================================= */ |
| 464 int ZEXPORT deflatePrime (strm, bits, value) |
| 465 z_streamp strm; |
| 466 int bits; |
| 467 int value; |
| 468 { |
| 469 deflate_state *s; |
| 470 int put; |
| 471 |
| 472 if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; |
| 473 s = strm->state; |
| 474 if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3)) |
| 475 return Z_BUF_ERROR; |
| 476 do { |
| 477 put = Buf_size - s->bi_valid; |
| 478 if (put > bits) |
| 479 put = bits; |
| 480 s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid); |
| 481 s->bi_valid += put; |
| 482 _tr_flush_bits(s); |
| 483 value >>= put; |
| 484 bits -= put; |
| 485 } while (bits); |
| 486 return Z_OK; |
| 487 } |
| 488 |
| 489 /* ========================================================================= */ |
| 490 int ZEXPORT deflateParams(strm, level, strategy) |
| 491 z_streamp strm; |
| 492 int level; |
| 493 int strategy; |
| 494 { |
| 495 deflate_state *s; |
| 496 compress_func func; |
| 497 int err = Z_OK; |
| 498 |
| 499 if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; |
| 500 s = strm->state; |
| 501 |
| 502 #ifdef FASTEST |
| 503 if (level != 0) level = 1; |
| 504 #else |
| 505 if (level == Z_DEFAULT_COMPRESSION) level = 6; |
| 506 #endif |
| 507 if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { |
| 508 return Z_STREAM_ERROR; |
| 509 } |
| 510 func = configuration_table[s->level].func; |
| 511 |
| 512 if ((strategy != s->strategy || func != configuration_table[level].func) && |
| 513 strm->total_in != 0) { |
| 514 /* Flush the last buffer: */ |
| 515 err = deflate(strm, Z_BLOCK); |
| 516 } |
| 517 if (s->level != level) { |
| 518 s->level = level; |
| 519 s->max_lazy_match = configuration_table[level].max_lazy; |
| 520 s->good_match = configuration_table[level].good_length; |
| 521 s->nice_match = configuration_table[level].nice_length; |
| 522 s->max_chain_length = configuration_table[level].max_chain; |
| 523 } |
| 524 s->strategy = strategy; |
| 525 return err; |
| 526 } |
| 527 |
| 528 /* ========================================================================= */ |
| 529 int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) |
| 530 z_streamp strm; |
| 531 int good_length; |
| 532 int max_lazy; |
| 533 int nice_length; |
| 534 int max_chain; |
| 535 { |
| 536 deflate_state *s; |
| 537 |
| 538 if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; |
| 539 s = strm->state; |
| 540 s->good_match = good_length; |
| 541 s->max_lazy_match = max_lazy; |
| 542 s->nice_match = nice_length; |
| 543 s->max_chain_length = max_chain; |
| 544 return Z_OK; |
| 545 } |
| 546 |
| 547 /* ========================================================================= |
| 548 * For the default windowBits of 15 and memLevel of 8, this function returns |
| 549 * a close to exact, as well as small, upper bound on the compressed size. |
| 550 * They are coded as constants here for a reason--if the #define's are |
| 551 * changed, then this function needs to be changed as well. The return |
| 552 * value for 15 and 8 only works for those exact settings. |
| 553 * |
| 554 * For any setting other than those defaults for windowBits and memLevel, |
| 555 * the value returned is a conservative worst case for the maximum expansion |
| 556 * resulting from using fixed blocks instead of stored blocks, which deflate |
| 557 * can emit on compressed data for some combinations of the parameters. |
| 558 * |
| 559 * This function could be more sophisticated to provide closer upper bounds for |
| 560 * every combination of windowBits and memLevel. But even the conservative |
| 561 * upper bound of about 14% expansion does not seem onerous for output buffer |
| 562 * allocation. |
| 563 */ |
| 564 uLong ZEXPORT deflateBound(strm, sourceLen) |
| 565 z_streamp strm; |
| 566 uLong sourceLen; |
| 567 { |
| 568 deflate_state *s; |
| 569 uLong complen, wraplen; |
| 570 Bytef *str; |
| 571 |
| 572 /* conservative upper bound for compressed data */ |
| 573 complen = sourceLen + |
| 574 ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5; |
| 575 |
| 576 /* if can't get parameters, return conservative bound plus zlib wrapper */ |
| 577 if (strm == Z_NULL || strm->state == Z_NULL) |
| 578 return complen + 6; |
| 579 |
| 580 /* compute wrapper length */ |
| 581 s = strm->state; |
| 582 switch (s->wrap) { |
| 583 case 0: /* raw deflate */ |
| 584 wraplen = 0; |
| 585 break; |
| 586 case 1: /* zlib wrapper */ |
| 587 wraplen = 6 + (s->strstart ? 4 : 0); |
| 588 break; |
| 589 case 2: /* gzip wrapper */ |
| 590 wraplen = 18; |
| 591 if (s->gzhead != Z_NULL) { /* user-supplied gzip header */ |
| 592 if (s->gzhead->extra != Z_NULL) |
| 593 wraplen += 2 + s->gzhead->extra_len; |
| 594 str = s->gzhead->name; |
| 595 if (str != Z_NULL) |
| 596 do { |
| 597 wraplen++; |
| 598 } while (*str++); |
| 599 str = s->gzhead->comment; |
| 600 if (str != Z_NULL) |
| 601 do { |
| 602 wraplen++; |
| 603 } while (*str++); |
| 604 if (s->gzhead->hcrc) |
| 605 wraplen += 2; |
| 606 } |
| 607 break; |
| 608 default: /* for compiler happiness */ |
| 609 wraplen = 6; |
| 610 } |
| 611 |
| 612 /* if not default parameters, return conservative bound */ |
| 613 if (s->w_bits != 15 || s->hash_bits != 8 + 7) |
| 614 return complen + wraplen; |
| 615 |
| 616 /* default settings: return tight bound for that case */ |
| 617 return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + |
| 618 (sourceLen >> 25) + 13 - 6 + wraplen; |
| 619 } |
| 620 |
| 621 /* ========================================================================= |
| 622 * Put a short in the pending buffer. The 16-bit value is put in MSB order. |
| 623 * IN assertion: the stream state is correct and there is enough room in |
| 624 * pending_buf. |
| 625 */ |
| 626 local void putShortMSB (s, b) |
| 627 deflate_state *s; |
| 628 uInt b; |
| 629 { |
| 630 put_byte(s, (Byte)(b >> 8)); |
| 631 put_byte(s, (Byte)(b & 0xff)); |
| 632 } |
| 633 |
| 634 /* ========================================================================= |
| 635 * Flush as much pending output as possible. All deflate() output goes |
| 636 * through this function so some applications may wish to modify it |
| 637 * to avoid allocating a large strm->next_out buffer and copying into it. |
| 638 * (See also read_buf()). |
| 639 */ |
| 640 local void flush_pending(strm) |
| 641 z_streamp strm; |
| 642 { |
| 643 unsigned len; |
| 644 deflate_state *s = strm->state; |
| 645 |
| 646 _tr_flush_bits(s); |
| 647 len = s->pending; |
| 648 if (len > strm->avail_out) len = strm->avail_out; |
| 649 if (len == 0) return; |
| 650 |
| 651 zmemcpy(strm->next_out, s->pending_out, len); |
| 652 strm->next_out += len; |
| 653 s->pending_out += len; |
| 654 strm->total_out += len; |
| 655 strm->avail_out -= len; |
| 656 s->pending -= len; |
| 657 if (s->pending == 0) { |
| 658 s->pending_out = s->pending_buf; |
| 659 } |
| 660 } |
| 661 |
| 662 /* ========================================================================= */ |
| 663 int ZEXPORT deflate (strm, flush) |
| 664 z_streamp strm; |
| 665 int flush; |
| 666 { |
| 667 int old_flush; /* value of flush param for previous deflate call */ |
| 668 deflate_state *s; |
| 669 |
| 670 if (strm == Z_NULL || strm->state == Z_NULL || |
| 671 flush > Z_BLOCK || flush < 0) { |
| 672 return Z_STREAM_ERROR; |
| 673 } |
| 674 s = strm->state; |
| 675 |
| 676 if (strm->next_out == Z_NULL || |
| 677 (strm->next_in == Z_NULL && strm->avail_in != 0) || |
| 678 (s->status == FINISH_STATE && flush != Z_FINISH)) { |
| 679 ERR_RETURN(strm, Z_STREAM_ERROR); |
| 680 } |
| 681 if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); |
| 682 |
| 683 s->strm = strm; /* just in case */ |
| 684 old_flush = s->last_flush; |
| 685 s->last_flush = flush; |
| 686 |
| 687 /* Write the header */ |
| 688 if (s->status == INIT_STATE) { |
| 689 #ifdef GZIP |
| 690 if (s->wrap == 2) { |
| 691 strm->adler = crc32(0L, Z_NULL, 0); |
| 692 put_byte(s, 31); |
| 693 put_byte(s, 139); |
| 694 put_byte(s, 8); |
| 695 if (s->gzhead == Z_NULL) { |
| 696 put_byte(s, 0); |
| 697 put_byte(s, 0); |
| 698 put_byte(s, 0); |
| 699 put_byte(s, 0); |
| 700 put_byte(s, 0); |
| 701 put_byte(s, s->level == 9 ? 2 : |
| 702 (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? |
| 703 4 : 0)); |
| 704 put_byte(s, OS_CODE); |
| 705 s->status = BUSY_STATE; |
| 706 } |
| 707 else { |
| 708 put_byte(s, (s->gzhead->text ? 1 : 0) + |
| 709 (s->gzhead->hcrc ? 2 : 0) + |
| 710 (s->gzhead->extra == Z_NULL ? 0 : 4) + |
| 711 (s->gzhead->name == Z_NULL ? 0 : 8) + |
| 712 (s->gzhead->comment == Z_NULL ? 0 : 16) |
| 713 ); |
| 714 put_byte(s, (Byte)(s->gzhead->time & 0xff)); |
| 715 put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); |
| 716 put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); |
| 717 put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); |
| 718 put_byte(s, s->level == 9 ? 2 : |
| 719 (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? |
| 720 4 : 0)); |
| 721 put_byte(s, s->gzhead->os & 0xff); |
| 722 if (s->gzhead->extra != Z_NULL) { |
| 723 put_byte(s, s->gzhead->extra_len & 0xff); |
| 724 put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); |
| 725 } |
| 726 if (s->gzhead->hcrc) |
| 727 strm->adler = crc32(strm->adler, s->pending_buf, |
| 728 s->pending); |
| 729 s->gzindex = 0; |
| 730 s->status = EXTRA_STATE; |
| 731 } |
| 732 } |
| 733 else |
| 734 #endif |
| 735 { |
| 736 uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; |
| 737 uInt level_flags; |
| 738 |
| 739 if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) |
| 740 level_flags = 0; |
| 741 else if (s->level < 6) |
| 742 level_flags = 1; |
| 743 else if (s->level == 6) |
| 744 level_flags = 2; |
| 745 else |
| 746 level_flags = 3; |
| 747 header |= (level_flags << 6); |
| 748 if (s->strstart != 0) header |= PRESET_DICT; |
| 749 header += 31 - (header % 31); |
| 750 |
| 751 s->status = BUSY_STATE; |
| 752 putShortMSB(s, header); |
| 753 |
| 754 /* Save the adler32 of the preset dictionary: */ |
| 755 if (s->strstart != 0) { |
| 756 putShortMSB(s, (uInt)(strm->adler >> 16)); |
| 757 putShortMSB(s, (uInt)(strm->adler & 0xffff)); |
| 758 } |
| 759 strm->adler = adler32(0L, Z_NULL, 0); |
| 760 } |
| 761 } |
| 762 #ifdef GZIP |
| 763 if (s->status == EXTRA_STATE) { |
| 764 if (s->gzhead->extra != Z_NULL) { |
| 765 uInt beg = s->pending; /* start of bytes to update crc */ |
| 766 |
| 767 while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { |
| 768 if (s->pending == s->pending_buf_size) { |
| 769 if (s->gzhead->hcrc && s->pending > beg) |
| 770 strm->adler = crc32(strm->adler, s->pending_buf + beg, |
| 771 s->pending - beg); |
| 772 flush_pending(strm); |
| 773 beg = s->pending; |
| 774 if (s->pending == s->pending_buf_size) |
| 775 break; |
| 776 } |
| 777 put_byte(s, s->gzhead->extra[s->gzindex]); |
| 778 s->gzindex++; |
| 779 } |
| 780 if (s->gzhead->hcrc && s->pending > beg) |
| 781 strm->adler = crc32(strm->adler, s->pending_buf + beg, |
| 782 s->pending - beg); |
| 783 if (s->gzindex == s->gzhead->extra_len) { |
| 784 s->gzindex = 0; |
| 785 s->status = NAME_STATE; |
| 786 } |
| 787 } |
| 788 else |
| 789 s->status = NAME_STATE; |
| 790 } |
| 791 if (s->status == NAME_STATE) { |
| 792 if (s->gzhead->name != Z_NULL) { |
| 793 uInt beg = s->pending; /* start of bytes to update crc */ |
| 794 int val; |
| 795 |
| 796 do { |
| 797 if (s->pending == s->pending_buf_size) { |
| 798 if (s->gzhead->hcrc && s->pending > beg) |
| 799 strm->adler = crc32(strm->adler, s->pending_buf + beg, |
| 800 s->pending - beg); |
| 801 flush_pending(strm); |
| 802 beg = s->pending; |
| 803 if (s->pending == s->pending_buf_size) { |
| 804 val = 1; |
| 805 break; |
| 806 } |
| 807 } |
| 808 val = s->gzhead->name[s->gzindex++]; |
| 809 put_byte(s, val); |
| 810 } while (val != 0); |
| 811 if (s->gzhead->hcrc && s->pending > beg) |
| 812 strm->adler = crc32(strm->adler, s->pending_buf + beg, |
| 813 s->pending - beg); |
| 814 if (val == 0) { |
| 815 s->gzindex = 0; |
| 816 s->status = COMMENT_STATE; |
| 817 } |
| 818 } |
| 819 else |
| 820 s->status = COMMENT_STATE; |
| 821 } |
| 822 if (s->status == COMMENT_STATE) { |
| 823 if (s->gzhead->comment != Z_NULL) { |
| 824 uInt beg = s->pending; /* start of bytes to update crc */ |
| 825 int val; |
| 826 |
| 827 do { |
| 828 if (s->pending == s->pending_buf_size) { |
| 829 if (s->gzhead->hcrc && s->pending > beg) |
| 830 strm->adler = crc32(strm->adler, s->pending_buf + beg, |
| 831 s->pending - beg); |
| 832 flush_pending(strm); |
| 833 beg = s->pending; |
| 834 if (s->pending == s->pending_buf_size) { |
| 835 val = 1; |
| 836 break; |
| 837 } |
| 838 } |
| 839 val = s->gzhead->comment[s->gzindex++]; |
| 840 put_byte(s, val); |
| 841 } while (val != 0); |
| 842 if (s->gzhead->hcrc && s->pending > beg) |
| 843 strm->adler = crc32(strm->adler, s->pending_buf + beg, |
| 844 s->pending - beg); |
| 845 if (val == 0) |
| 846 s->status = HCRC_STATE; |
| 847 } |
| 848 else |
| 849 s->status = HCRC_STATE; |
| 850 } |
| 851 if (s->status == HCRC_STATE) { |
| 852 if (s->gzhead->hcrc) { |
| 853 if (s->pending + 2 > s->pending_buf_size) |
| 854 flush_pending(strm); |
| 855 if (s->pending + 2 <= s->pending_buf_size) { |
| 856 put_byte(s, (Byte)(strm->adler & 0xff)); |
| 857 put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); |
| 858 strm->adler = crc32(0L, Z_NULL, 0); |
| 859 s->status = BUSY_STATE; |
| 860 } |
| 861 } |
| 862 else |
| 863 s->status = BUSY_STATE; |
| 864 } |
| 865 #endif |
| 866 |
| 867 /* Flush as much pending output as possible */ |
| 868 if (s->pending != 0) { |
| 869 flush_pending(strm); |
| 870 if (strm->avail_out == 0) { |
| 871 /* Since avail_out is 0, deflate will be called again with |
| 872 * more output space, but possibly with both pending and |
| 873 * avail_in equal to zero. There won't be anything to do, |
| 874 * but this is not an error situation so make sure we |
| 875 * return OK instead of BUF_ERROR at next call of deflate: |
| 876 */ |
| 877 s->last_flush = -1; |
| 878 return Z_OK; |
| 879 } |
| 880 |
| 881 /* Make sure there is something to do and avoid duplicate consecutive |
| 882 * flushes. For repeated and useless calls with Z_FINISH, we keep |
| 883 * returning Z_STREAM_END instead of Z_BUF_ERROR. |
| 884 */ |
| 885 } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) && |
| 886 flush != Z_FINISH) { |
| 887 ERR_RETURN(strm, Z_BUF_ERROR); |
| 888 } |
| 889 |
| 890 /* User must not provide more input after the first FINISH: */ |
| 891 if (s->status == FINISH_STATE && strm->avail_in != 0) { |
| 892 ERR_RETURN(strm, Z_BUF_ERROR); |
| 893 } |
| 894 |
| 895 /* Start a new block or continue the current one. |
| 896 */ |
| 897 if (strm->avail_in != 0 || s->lookahead != 0 || |
| 898 (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { |
| 899 block_state bstate; |
| 900 |
| 901 bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) : |
| 902 (s->strategy == Z_RLE ? deflate_rle(s, flush) : |
| 903 (*(configuration_table[s->level].func))(s, flush)); |
| 904 |
| 905 if (bstate == finish_started || bstate == finish_done) { |
| 906 s->status = FINISH_STATE; |
| 907 } |
| 908 if (bstate == need_more || bstate == finish_started) { |
| 909 if (strm->avail_out == 0) { |
| 910 s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ |
| 911 } |
| 912 return Z_OK; |
| 913 /* If flush != Z_NO_FLUSH && avail_out == 0, the next call |
| 914 * of deflate should use the same flush parameter to make sure |
| 915 * that the flush is complete. So we don't have to output an |
| 916 * empty block here, this will be done at next call. This also |
| 917 * ensures that for a very small output buffer, we emit at most |
| 918 * one empty block. |
| 919 */ |
| 920 } |
| 921 if (bstate == block_done) { |
| 922 if (flush == Z_PARTIAL_FLUSH) { |
| 923 _tr_align(s); |
| 924 } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */ |
| 925 _tr_stored_block(s, (char*)0, 0L, 0); |
| 926 /* For a full flush, this empty block will be recognized |
| 927 * as a special marker by inflate_sync(). |
| 928 */ |
| 929 if (flush == Z_FULL_FLUSH) { |
| 930 CLEAR_HASH(s); /* forget history */ |
| 931 if (s->lookahead == 0) { |
| 932 s->strstart = 0; |
| 933 s->block_start = 0L; |
| 934 s->insert = 0; |
| 935 } |
| 936 } |
| 937 } |
| 938 flush_pending(strm); |
| 939 if (strm->avail_out == 0) { |
| 940 s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ |
| 941 return Z_OK; |
| 942 } |
| 943 } |
| 944 } |
| 945 Assert(strm->avail_out > 0, "bug2"); |
| 946 |
| 947 if (flush != Z_FINISH) return Z_OK; |
| 948 if (s->wrap <= 0) return Z_STREAM_END; |
| 949 |
| 950 /* Write the trailer */ |
| 951 #ifdef GZIP |
| 952 if (s->wrap == 2) { |
| 953 put_byte(s, (Byte)(strm->adler & 0xff)); |
| 954 put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); |
| 955 put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); |
| 956 put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); |
| 957 put_byte(s, (Byte)(strm->total_in & 0xff)); |
| 958 put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); |
| 959 put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); |
| 960 put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); |
| 961 } |
| 962 else |
| 963 #endif |
| 964 { |
| 965 putShortMSB(s, (uInt)(strm->adler >> 16)); |
| 966 putShortMSB(s, (uInt)(strm->adler & 0xffff)); |
| 967 } |
| 968 flush_pending(strm); |
| 969 /* If avail_out is zero, the application will call deflate again |
| 970 * to flush the rest. |
| 971 */ |
| 972 if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ |
| 973 return s->pending != 0 ? Z_OK : Z_STREAM_END; |
| 974 } |
| 975 |
| 976 /* ========================================================================= */ |
| 977 int ZEXPORT deflateEnd (strm) |
| 978 z_streamp strm; |
| 979 { |
| 980 int status; |
| 981 |
| 982 if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; |
| 983 |
| 984 status = strm->state->status; |
| 985 if (status != INIT_STATE && |
| 986 status != EXTRA_STATE && |
| 987 status != NAME_STATE && |
| 988 status != COMMENT_STATE && |
| 989 status != HCRC_STATE && |
| 990 status != BUSY_STATE && |
| 991 status != FINISH_STATE) { |
| 992 return Z_STREAM_ERROR; |
| 993 } |
| 994 |
| 995 /* Deallocate in reverse order of allocations: */ |
| 996 TRY_FREE(strm, strm->state->pending_buf); |
| 997 TRY_FREE(strm, strm->state->head); |
| 998 TRY_FREE(strm, strm->state->prev); |
| 999 TRY_FREE(strm, strm->state->window); |
| 1000 |
| 1001 ZFREE(strm, strm->state); |
| 1002 strm->state = Z_NULL; |
| 1003 |
| 1004 return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; |
| 1005 } |
| 1006 |
| 1007 /* ========================================================================= |
| 1008 * Copy the source state to the destination state. |
| 1009 * To simplify the source, this is not supported for 16-bit MSDOS (which |
| 1010 * doesn't have enough memory anyway to duplicate compression states). |
| 1011 */ |
| 1012 int ZEXPORT deflateCopy (dest, source) |
| 1013 z_streamp dest; |
| 1014 z_streamp source; |
| 1015 { |
| 1016 #ifdef MAXSEG_64K |
| 1017 return Z_STREAM_ERROR; |
| 1018 #else |
| 1019 deflate_state *ds; |
| 1020 deflate_state *ss; |
| 1021 ushf *overlay; |
| 1022 |
| 1023 |
| 1024 if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { |
| 1025 return Z_STREAM_ERROR; |
| 1026 } |
| 1027 |
| 1028 ss = source->state; |
| 1029 |
| 1030 zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); |
| 1031 |
| 1032 ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); |
| 1033 if (ds == Z_NULL) return Z_MEM_ERROR; |
| 1034 dest->state = (struct internal_state FAR *) ds; |
| 1035 zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state)); |
| 1036 ds->strm = dest; |
| 1037 |
| 1038 ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); |
| 1039 ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); |
| 1040 ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); |
| 1041 overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); |
| 1042 ds->pending_buf = (uchf *) overlay; |
| 1043 |
| 1044 if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || |
| 1045 ds->pending_buf == Z_NULL) { |
| 1046 deflateEnd (dest); |
| 1047 return Z_MEM_ERROR; |
| 1048 } |
| 1049 /* following zmemcpy do not work for 16-bit MSDOS */ |
| 1050 zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); |
| 1051 zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos)); |
| 1052 zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos)); |
| 1053 zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); |
| 1054 |
| 1055 ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); |
| 1056 ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); |
| 1057 ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; |
| 1058 |
| 1059 ds->l_desc.dyn_tree = ds->dyn_ltree; |
| 1060 ds->d_desc.dyn_tree = ds->dyn_dtree; |
| 1061 ds->bl_desc.dyn_tree = ds->bl_tree; |
| 1062 |
| 1063 return Z_OK; |
| 1064 #endif /* MAXSEG_64K */ |
| 1065 } |
| 1066 |
| 1067 /* =========================================================================== |
| 1068 * Read a new buffer from the current input stream, update the adler32 |
| 1069 * and total number of bytes read. All deflate() input goes through |
| 1070 * this function so some applications may wish to modify it to avoid |
| 1071 * allocating a large strm->next_in buffer and copying from it. |
| 1072 * (See also flush_pending()). |
| 1073 */ |
| 1074 local int read_buf(strm, buf, size) |
| 1075 z_streamp strm; |
| 1076 Bytef *buf; |
| 1077 unsigned size; |
| 1078 { |
| 1079 unsigned len = strm->avail_in; |
| 1080 |
| 1081 if (len > size) len = size; |
| 1082 if (len == 0) return 0; |
| 1083 |
| 1084 strm->avail_in -= len; |
| 1085 |
| 1086 zmemcpy(buf, strm->next_in, len); |
| 1087 if (strm->state->wrap == 1) { |
| 1088 strm->adler = adler32(strm->adler, buf, len); |
| 1089 } |
| 1090 #ifdef GZIP |
| 1091 else if (strm->state->wrap == 2) { |
| 1092 strm->adler = crc32(strm->adler, buf, len); |
| 1093 } |
| 1094 #endif |
| 1095 strm->next_in += len; |
| 1096 strm->total_in += len; |
| 1097 |
| 1098 return (int)len; |
| 1099 } |
| 1100 |
| 1101 /* =========================================================================== |
| 1102 * Initialize the "longest match" routines for a new zlib stream |
| 1103 */ |
| 1104 local void lm_init (s) |
| 1105 deflate_state *s; |
| 1106 { |
| 1107 s->window_size = (ulg)2L*s->w_size; |
| 1108 |
| 1109 CLEAR_HASH(s); |
| 1110 |
| 1111 /* Set the default configuration parameters: |
| 1112 */ |
| 1113 s->max_lazy_match = configuration_table[s->level].max_lazy; |
| 1114 s->good_match = configuration_table[s->level].good_length; |
| 1115 s->nice_match = configuration_table[s->level].nice_length; |
| 1116 s->max_chain_length = configuration_table[s->level].max_chain; |
| 1117 |
| 1118 s->strstart = 0; |
| 1119 s->block_start = 0L; |
| 1120 s->lookahead = 0; |
| 1121 s->insert = 0; |
| 1122 s->match_length = s->prev_length = MIN_MATCH-1; |
| 1123 s->match_available = 0; |
| 1124 s->ins_h = 0; |
| 1125 #ifndef FASTEST |
| 1126 #ifdef ASMV |
| 1127 match_init(); /* initialize the asm code */ |
| 1128 #endif |
| 1129 #endif |
| 1130 } |
| 1131 |
| 1132 #ifndef FASTEST |
| 1133 /* =========================================================================== |
| 1134 * Set match_start to the longest match starting at the given string and |
| 1135 * return its length. Matches shorter or equal to prev_length are discarded, |
| 1136 * in which case the result is equal to prev_length and match_start is |
| 1137 * garbage. |
| 1138 * IN assertions: cur_match is the head of the hash chain for the current |
| 1139 * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 |
| 1140 * OUT assertion: the match length is not greater than s->lookahead. |
| 1141 */ |
| 1142 #ifndef ASMV |
| 1143 /* For 80x86 and 680x0, an optimized version will be provided in match.asm or |
| 1144 * match.S. The code will be functionally equivalent. |
| 1145 */ |
| 1146 local uInt longest_match(s, cur_match) |
| 1147 deflate_state *s; |
| 1148 IPos cur_match; /* current match */ |
| 1149 { |
| 1150 unsigned chain_length = s->max_chain_length;/* max hash chain length */ |
| 1151 register Bytef *scan = s->window + s->strstart; /* current string */ |
| 1152 register Bytef *match; /* matched string */ |
| 1153 register int len; /* length of current match */ |
| 1154 int best_len = s->prev_length; /* best match length so far */ |
| 1155 int nice_match = s->nice_match; /* stop if match long enough */ |
| 1156 IPos limit = s->strstart > (IPos)MAX_DIST(s) ? |
| 1157 s->strstart - (IPos)MAX_DIST(s) : NIL; |
| 1158 /* Stop when cur_match becomes <= limit. To simplify the code, |
| 1159 * we prevent matches with the string of window index 0. |
| 1160 */ |
| 1161 Posf *prev = s->prev; |
| 1162 uInt wmask = s->w_mask; |
| 1163 |
| 1164 #ifdef UNALIGNED_OK |
| 1165 /* Compare two bytes at a time. Note: this is not always beneficial. |
| 1166 * Try with and without -DUNALIGNED_OK to check. |
| 1167 */ |
| 1168 register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; |
| 1169 register ush scan_start = *(ushf*)scan; |
| 1170 register ush scan_end = *(ushf*)(scan+best_len-1); |
| 1171 #else |
| 1172 register Bytef *strend = s->window + s->strstart + MAX_MATCH; |
| 1173 register Byte scan_end1 = scan[best_len-1]; |
| 1174 register Byte scan_end = scan[best_len]; |
| 1175 #endif |
| 1176 |
| 1177 /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. |
| 1178 * It is easy to get rid of this optimization if necessary. |
| 1179 */ |
| 1180 Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); |
| 1181 |
| 1182 /* Do not waste too much time if we already have a good match: */ |
| 1183 if (s->prev_length >= s->good_match) { |
| 1184 chain_length >>= 2; |
| 1185 } |
| 1186 /* Do not look for matches beyond the end of the input. This is necessary |
| 1187 * to make deflate deterministic. |
| 1188 */ |
| 1189 if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; |
| 1190 |
| 1191 Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); |
| 1192 |
| 1193 do { |
| 1194 Assert(cur_match < s->strstart, "no future"); |
| 1195 match = s->window + cur_match; |
| 1196 |
| 1197 /* Skip to next match if the match length cannot increase |
| 1198 * or if the match length is less than 2. Note that the checks below |
| 1199 * for insufficient lookahead only occur occasionally for performance |
| 1200 * reasons. Therefore uninitialized memory will be accessed, and |
| 1201 * conditional jumps will be made that depend on those values. |
| 1202 * However the length of the match is limited to the lookahead, so |
| 1203 * the output of deflate is not affected by the uninitialized values. |
| 1204 */ |
| 1205 #if (defined(UNALIGNED_OK) && MAX_MATCH == 258) |
| 1206 /* This code assumes sizeof(unsigned short) == 2. Do not use |
| 1207 * UNALIGNED_OK if your compiler uses a different size. |
| 1208 */ |
| 1209 if (*(ushf*)(match+best_len-1) != scan_end || |
| 1210 *(ushf*)match != scan_start) continue; |
| 1211 |
| 1212 /* It is not necessary to compare scan[2] and match[2] since they are |
| 1213 * always equal when the other bytes match, given that the hash keys |
| 1214 * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at |
| 1215 * strstart+3, +5, ... up to strstart+257. We check for insufficient |
| 1216 * lookahead only every 4th comparison; the 128th check will be made |
| 1217 * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is |
| 1218 * necessary to put more guard bytes at the end of the window, or |
| 1219 * to check more often for insufficient lookahead. |
| 1220 */ |
| 1221 Assert(scan[2] == match[2], "scan[2]?"); |
| 1222 scan++, match++; |
| 1223 do { |
| 1224 } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && |
| 1225 *(ushf*)(scan+=2) == *(ushf*)(match+=2) && |
| 1226 *(ushf*)(scan+=2) == *(ushf*)(match+=2) && |
| 1227 *(ushf*)(scan+=2) == *(ushf*)(match+=2) && |
| 1228 scan < strend); |
| 1229 /* The funny "do {}" generates better code on most compilers */ |
| 1230 |
| 1231 /* Here, scan <= window+strstart+257 */ |
| 1232 Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); |
| 1233 if (*scan == *match) scan++; |
| 1234 |
| 1235 len = (MAX_MATCH - 1) - (int)(strend-scan); |
| 1236 scan = strend - (MAX_MATCH-1); |
| 1237 |
| 1238 #else /* UNALIGNED_OK */ |
| 1239 |
| 1240 if (match[best_len] != scan_end || |
| 1241 match[best_len-1] != scan_end1 || |
| 1242 *match != *scan || |
| 1243 *++match != scan[1]) continue; |
| 1244 |
| 1245 /* The check at best_len-1 can be removed because it will be made |
| 1246 * again later. (This heuristic is not always a win.) |
| 1247 * It is not necessary to compare scan[2] and match[2] since they |
| 1248 * are always equal when the other bytes match, given that |
| 1249 * the hash keys are equal and that HASH_BITS >= 8. |
| 1250 */ |
| 1251 scan += 2, match++; |
| 1252 Assert(*scan == *match, "match[2]?"); |
| 1253 |
| 1254 /* We check for insufficient lookahead only every 8th comparison; |
| 1255 * the 256th check will be made at strstart+258. |
| 1256 */ |
| 1257 do { |
| 1258 } while (*++scan == *++match && *++scan == *++match && |
| 1259 *++scan == *++match && *++scan == *++match && |
| 1260 *++scan == *++match && *++scan == *++match && |
| 1261 *++scan == *++match && *++scan == *++match && |
| 1262 scan < strend); |
| 1263 |
| 1264 Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); |
| 1265 |
| 1266 len = MAX_MATCH - (int)(strend - scan); |
| 1267 scan = strend - MAX_MATCH; |
| 1268 |
| 1269 #endif /* UNALIGNED_OK */ |
| 1270 |
| 1271 if (len > best_len) { |
| 1272 s->match_start = cur_match; |
| 1273 best_len = len; |
| 1274 if (len >= nice_match) break; |
| 1275 #ifdef UNALIGNED_OK |
| 1276 scan_end = *(ushf*)(scan+best_len-1); |
| 1277 #else |
| 1278 scan_end1 = scan[best_len-1]; |
| 1279 scan_end = scan[best_len]; |
| 1280 #endif |
| 1281 } |
| 1282 } while ((cur_match = prev[cur_match & wmask]) > limit |
| 1283 && --chain_length != 0); |
| 1284 |
| 1285 if ((uInt)best_len <= s->lookahead) return (uInt)best_len; |
| 1286 return s->lookahead; |
| 1287 } |
| 1288 #endif /* ASMV */ |
| 1289 |
| 1290 #else /* FASTEST */ |
| 1291 |
| 1292 /* --------------------------------------------------------------------------- |
| 1293 * Optimized version for FASTEST only |
| 1294 */ |
| 1295 local uInt longest_match(s, cur_match) |
| 1296 deflate_state *s; |
| 1297 IPos cur_match; /* current match */ |
| 1298 { |
| 1299 register Bytef *scan = s->window + s->strstart; /* current string */ |
| 1300 register Bytef *match; /* matched string */ |
| 1301 register int len; /* length of current match */ |
| 1302 register Bytef *strend = s->window + s->strstart + MAX_MATCH; |
| 1303 |
| 1304 /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. |
| 1305 * It is easy to get rid of this optimization if necessary. |
| 1306 */ |
| 1307 Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); |
| 1308 |
| 1309 Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); |
| 1310 |
| 1311 Assert(cur_match < s->strstart, "no future"); |
| 1312 |
| 1313 match = s->window + cur_match; |
| 1314 |
| 1315 /* Return failure if the match length is less than 2: |
| 1316 */ |
| 1317 if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; |
| 1318 |
| 1319 /* The check at best_len-1 can be removed because it will be made |
| 1320 * again later. (This heuristic is not always a win.) |
| 1321 * It is not necessary to compare scan[2] and match[2] since they |
| 1322 * are always equal when the other bytes match, given that |
| 1323 * the hash keys are equal and that HASH_BITS >= 8. |
| 1324 */ |
| 1325 scan += 2, match += 2; |
| 1326 Assert(*scan == *match, "match[2]?"); |
| 1327 |
| 1328 /* We check for insufficient lookahead only every 8th comparison; |
| 1329 * the 256th check will be made at strstart+258. |
| 1330 */ |
| 1331 do { |
| 1332 } while (*++scan == *++match && *++scan == *++match && |
| 1333 *++scan == *++match && *++scan == *++match && |
| 1334 *++scan == *++match && *++scan == *++match && |
| 1335 *++scan == *++match && *++scan == *++match && |
| 1336 scan < strend); |
| 1337 |
| 1338 Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); |
| 1339 |
| 1340 len = MAX_MATCH - (int)(strend - scan); |
| 1341 |
| 1342 if (len < MIN_MATCH) return MIN_MATCH - 1; |
| 1343 |
| 1344 s->match_start = cur_match; |
| 1345 return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; |
| 1346 } |
| 1347 |
| 1348 #endif /* FASTEST */ |
| 1349 |
| 1350 #ifdef DEBUG |
| 1351 /* =========================================================================== |
| 1352 * Check that the match at match_start is indeed a match. |
| 1353 */ |
| 1354 local void check_match(s, start, match, length) |
| 1355 deflate_state *s; |
| 1356 IPos start, match; |
| 1357 int length; |
| 1358 { |
| 1359 /* check that the match is indeed a match */ |
| 1360 if (zmemcmp(s->window + match, |
| 1361 s->window + start, length) != EQUAL) { |
| 1362 fprintf(stderr, " start %u, match %u, length %d\n", |
| 1363 start, match, length); |
| 1364 do { |
| 1365 fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); |
| 1366 } while (--length != 0); |
| 1367 z_error("invalid match"); |
| 1368 } |
| 1369 if (z_verbose > 1) { |
| 1370 fprintf(stderr,"\\[%d,%d]", start-match, length); |
| 1371 do { putc(s->window[start++], stderr); } while (--length != 0); |
| 1372 } |
| 1373 } |
| 1374 #else |
| 1375 # define check_match(s, start, match, length) |
| 1376 #endif /* DEBUG */ |
| 1377 |
| 1378 /* =========================================================================== |
| 1379 * Fill the window when the lookahead becomes insufficient. |
| 1380 * Updates strstart and lookahead. |
| 1381 * |
| 1382 * IN assertion: lookahead < MIN_LOOKAHEAD |
| 1383 * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD |
| 1384 * At least one byte has been read, or avail_in == 0; reads are |
| 1385 * performed for at least two bytes (required for the zip translate_eol |
| 1386 * option -- not supported here). |
| 1387 */ |
| 1388 local void fill_window(s) |
| 1389 deflate_state *s; |
| 1390 { |
| 1391 register unsigned n, m; |
| 1392 register Posf *p; |
| 1393 unsigned more; /* Amount of free space at the end of the window. */ |
| 1394 uInt wsize = s->w_size; |
| 1395 |
| 1396 Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead"); |
| 1397 |
| 1398 do { |
| 1399 more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); |
| 1400 |
| 1401 /* Deal with !@#$% 64K limit: */ |
| 1402 if (sizeof(int) <= 2) { |
| 1403 if (more == 0 && s->strstart == 0 && s->lookahead == 0) { |
| 1404 more = wsize; |
| 1405 |
| 1406 } else if (more == (unsigned)(-1)) { |
| 1407 /* Very unlikely, but possible on 16 bit machine if |
| 1408 * strstart == 0 && lookahead == 1 (input done a byte at time) |
| 1409 */ |
| 1410 more--; |
| 1411 } |
| 1412 } |
| 1413 |
| 1414 /* If the window is almost full and there is insufficient lookahead, |
| 1415 * move the upper half to the lower one to make room in the upper half. |
| 1416 */ |
| 1417 if (s->strstart >= wsize+MAX_DIST(s)) { |
| 1418 |
| 1419 zmemcpy(s->window, s->window+wsize, (unsigned)wsize); |
| 1420 s->match_start -= wsize; |
| 1421 s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ |
| 1422 s->block_start -= (long) wsize; |
| 1423 |
| 1424 /* Slide the hash table (could be avoided with 32 bit values |
| 1425 at the expense of memory usage). We slide even when level == 0 |
| 1426 to keep the hash table consistent if we switch back to level > 0 |
| 1427 later. (Using level 0 permanently is not an optimal usage of |
| 1428 zlib, so we don't care about this pathological case.) |
| 1429 */ |
| 1430 n = s->hash_size; |
| 1431 p = &s->head[n]; |
| 1432 do { |
| 1433 m = *--p; |
| 1434 *p = (Pos)(m >= wsize ? m-wsize : NIL); |
| 1435 } while (--n); |
| 1436 |
| 1437 n = wsize; |
| 1438 #ifndef FASTEST |
| 1439 p = &s->prev[n]; |
| 1440 do { |
| 1441 m = *--p; |
| 1442 *p = (Pos)(m >= wsize ? m-wsize : NIL); |
| 1443 /* If n is not on any hash chain, prev[n] is garbage but |
| 1444 * its value will never be used. |
| 1445 */ |
| 1446 } while (--n); |
| 1447 #endif |
| 1448 more += wsize; |
| 1449 } |
| 1450 if (s->strm->avail_in == 0) break; |
| 1451 |
| 1452 /* If there was no sliding: |
| 1453 * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && |
| 1454 * more == window_size - lookahead - strstart |
| 1455 * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) |
| 1456 * => more >= window_size - 2*WSIZE + 2 |
| 1457 * In the BIG_MEM or MMAP case (not yet supported), |
| 1458 * window_size == input_size + MIN_LOOKAHEAD && |
| 1459 * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. |
| 1460 * Otherwise, window_size == 2*WSIZE so more >= 2. |
| 1461 * If there was sliding, more >= WSIZE. So in all cases, more >= 2. |
| 1462 */ |
| 1463 Assert(more >= 2, "more < 2"); |
| 1464 |
| 1465 n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); |
| 1466 s->lookahead += n; |
| 1467 |
| 1468 /* Initialize the hash value now that we have some input: */ |
| 1469 if (s->lookahead + s->insert >= MIN_MATCH) { |
| 1470 uInt str = s->strstart - s->insert; |
| 1471 s->ins_h = s->window[str]; |
| 1472 UPDATE_HASH(s, s->ins_h, s->window[str + 1]); |
| 1473 #if MIN_MATCH != 3 |
| 1474 Call UPDATE_HASH() MIN_MATCH-3 more times |
| 1475 #endif |
| 1476 while (s->insert) { |
| 1477 UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); |
| 1478 #ifndef FASTEST |
| 1479 s->prev[str & s->w_mask] = s->head[s->ins_h]; |
| 1480 #endif |
| 1481 s->head[s->ins_h] = (Pos)str; |
| 1482 str++; |
| 1483 s->insert--; |
| 1484 if (s->lookahead + s->insert < MIN_MATCH) |
| 1485 break; |
| 1486 } |
| 1487 } |
| 1488 /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, |
| 1489 * but this is not important since only literal bytes will be emitted. |
| 1490 */ |
| 1491 |
| 1492 } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); |
| 1493 |
| 1494 /* If the WIN_INIT bytes after the end of the current data have never been |
| 1495 * written, then zero those bytes in order to avoid memory check reports of |
| 1496 * the use of uninitialized (or uninitialised as Julian writes) bytes by |
| 1497 * the longest match routines. Update the high water mark for the next |
| 1498 * time through here. WIN_INIT is set to MAX_MATCH since the longest match |
| 1499 * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead. |
| 1500 */ |
| 1501 if (s->high_water < s->window_size) { |
| 1502 ulg curr = s->strstart + (ulg)(s->lookahead); |
| 1503 ulg init; |
| 1504 |
| 1505 if (s->high_water < curr) { |
| 1506 /* Previous high water mark below current data -- zero WIN_INIT |
| 1507 * bytes or up to end of window, whichever is less. |
| 1508 */ |
| 1509 init = s->window_size - curr; |
| 1510 if (init > WIN_INIT) |
| 1511 init = WIN_INIT; |
| 1512 zmemzero(s->window + curr, (unsigned)init); |
| 1513 s->high_water = curr + init; |
| 1514 } |
| 1515 else if (s->high_water < (ulg)curr + WIN_INIT) { |
| 1516 /* High water mark at or above current data, but below current data |
| 1517 * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up |
| 1518 * to end of window, whichever is less. |
| 1519 */ |
| 1520 init = (ulg)curr + WIN_INIT - s->high_water; |
| 1521 if (init > s->window_size - s->high_water) |
| 1522 init = s->window_size - s->high_water; |
| 1523 zmemzero(s->window + s->high_water, (unsigned)init); |
| 1524 s->high_water += init; |
| 1525 } |
| 1526 } |
| 1527 |
| 1528 Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD, |
| 1529 "not enough room for search"); |
| 1530 } |
| 1531 |
| 1532 /* =========================================================================== |
| 1533 * Flush the current block, with given end-of-file flag. |
| 1534 * IN assertion: strstart is set to the end of the current match. |
| 1535 */ |
| 1536 #define FLUSH_BLOCK_ONLY(s, last) { \ |
| 1537 _tr_flush_block(s, (s->block_start >= 0L ? \ |
| 1538 (charf *)&s->window[(unsigned)s->block_start] : \ |
| 1539 (charf *)Z_NULL), \ |
| 1540 (ulg)((long)s->strstart - s->block_start), \ |
| 1541 (last)); \ |
| 1542 s->block_start = s->strstart; \ |
| 1543 flush_pending(s->strm); \ |
| 1544 Tracev((stderr,"[FLUSH]")); \ |
| 1545 } |
| 1546 |
| 1547 /* Same but force premature exit if necessary. */ |
| 1548 #define FLUSH_BLOCK(s, last) { \ |
| 1549 FLUSH_BLOCK_ONLY(s, last); \ |
| 1550 if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \ |
| 1551 } |
| 1552 |
| 1553 /* =========================================================================== |
| 1554 * Copy without compression as much as possible from the input stream, return |
| 1555 * the current block state. |
| 1556 * This function does not insert new strings in the dictionary since |
| 1557 * uncompressible data is probably not useful. This function is used |
| 1558 * only for the level=0 compression option. |
| 1559 * NOTE: this function should be optimized to avoid extra copying from |
| 1560 * window to pending_buf. |
| 1561 */ |
| 1562 local block_state deflate_stored(s, flush) |
| 1563 deflate_state *s; |
| 1564 int flush; |
| 1565 { |
| 1566 /* Stored blocks are limited to 0xffff bytes, pending_buf is limited |
| 1567 * to pending_buf_size, and each stored block has a 5 byte header: |
| 1568 */ |
| 1569 ulg max_block_size = 0xffff; |
| 1570 ulg max_start; |
| 1571 |
| 1572 if (max_block_size > s->pending_buf_size - 5) { |
| 1573 max_block_size = s->pending_buf_size - 5; |
| 1574 } |
| 1575 |
| 1576 /* Copy as much as possible from input to output: */ |
| 1577 for (;;) { |
| 1578 /* Fill the window as much as possible: */ |
| 1579 if (s->lookahead <= 1) { |
| 1580 |
| 1581 Assert(s->strstart < s->w_size+MAX_DIST(s) || |
| 1582 s->block_start >= (long)s->w_size, "slide too late"); |
| 1583 |
| 1584 fill_window(s); |
| 1585 if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; |
| 1586 |
| 1587 if (s->lookahead == 0) break; /* flush the current block */ |
| 1588 } |
| 1589 Assert(s->block_start >= 0L, "block gone"); |
| 1590 |
| 1591 s->strstart += s->lookahead; |
| 1592 s->lookahead = 0; |
| 1593 |
| 1594 /* Emit a stored block if pending_buf will be full: */ |
| 1595 max_start = s->block_start + max_block_size; |
| 1596 if (s->strstart == 0 || (ulg)s->strstart >= max_start) { |
| 1597 /* strstart == 0 is possible when wraparound on 16-bit machine */ |
| 1598 s->lookahead = (uInt)(s->strstart - max_start); |
| 1599 s->strstart = (uInt)max_start; |
| 1600 FLUSH_BLOCK(s, 0); |
| 1601 } |
| 1602 /* Flush if we may have to slide, otherwise block_start may become |
| 1603 * negative and the data will be gone: |
| 1604 */ |
| 1605 if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { |
| 1606 FLUSH_BLOCK(s, 0); |
| 1607 } |
| 1608 } |
| 1609 s->insert = 0; |
| 1610 if (flush == Z_FINISH) { |
| 1611 FLUSH_BLOCK(s, 1); |
| 1612 return finish_done; |
| 1613 } |
| 1614 if ((long)s->strstart > s->block_start) |
| 1615 FLUSH_BLOCK(s, 0); |
| 1616 return block_done; |
| 1617 } |
| 1618 |
| 1619 /* =========================================================================== |
| 1620 * Compress as much as possible from the input stream, return the current |
| 1621 * block state. |
| 1622 * This function does not perform lazy evaluation of matches and inserts |
| 1623 * new strings in the dictionary only for unmatched strings or for short |
| 1624 * matches. It is used only for the fast compression options. |
| 1625 */ |
| 1626 local block_state deflate_fast(s, flush) |
| 1627 deflate_state *s; |
| 1628 int flush; |
| 1629 { |
| 1630 IPos hash_head; /* head of the hash chain */ |
| 1631 int bflush; /* set if current block must be flushed */ |
| 1632 |
| 1633 for (;;) { |
| 1634 /* Make sure that we always have enough lookahead, except |
| 1635 * at the end of the input file. We need MAX_MATCH bytes |
| 1636 * for the next match, plus MIN_MATCH bytes to insert the |
| 1637 * string following the next match. |
| 1638 */ |
| 1639 if (s->lookahead < MIN_LOOKAHEAD) { |
| 1640 fill_window(s); |
| 1641 if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { |
| 1642 return need_more; |
| 1643 } |
| 1644 if (s->lookahead == 0) break; /* flush the current block */ |
| 1645 } |
| 1646 |
| 1647 /* Insert the string window[strstart .. strstart+2] in the |
| 1648 * dictionary, and set hash_head to the head of the hash chain: |
| 1649 */ |
| 1650 hash_head = NIL; |
| 1651 if (s->lookahead >= MIN_MATCH) { |
| 1652 INSERT_STRING(s, s->strstart, hash_head); |
| 1653 } |
| 1654 |
| 1655 /* Find the longest match, discarding those <= prev_length. |
| 1656 * At this point we have always match_length < MIN_MATCH |
| 1657 */ |
| 1658 if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { |
| 1659 /* To simplify the code, we prevent matches with the string |
| 1660 * of window index 0 (in particular we have to avoid a match |
| 1661 * of the string with itself at the start of the input file). |
| 1662 */ |
| 1663 s->match_length = longest_match (s, hash_head); |
| 1664 /* longest_match() sets match_start */ |
| 1665 } |
| 1666 if (s->match_length >= MIN_MATCH) { |
| 1667 check_match(s, s->strstart, s->match_start, s->match_length); |
| 1668 |
| 1669 _tr_tally_dist(s, s->strstart - s->match_start, |
| 1670 s->match_length - MIN_MATCH, bflush); |
| 1671 |
| 1672 s->lookahead -= s->match_length; |
| 1673 |
| 1674 /* Insert new strings in the hash table only if the match length |
| 1675 * is not too large. This saves time but degrades compression. |
| 1676 */ |
| 1677 #ifndef FASTEST |
| 1678 if (s->match_length <= s->max_insert_length && |
| 1679 s->lookahead >= MIN_MATCH) { |
| 1680 s->match_length--; /* string at strstart already in table */ |
| 1681 do { |
| 1682 s->strstart++; |
| 1683 INSERT_STRING(s, s->strstart, hash_head); |
| 1684 /* strstart never exceeds WSIZE-MAX_MATCH, so there are |
| 1685 * always MIN_MATCH bytes ahead. |
| 1686 */ |
| 1687 } while (--s->match_length != 0); |
| 1688 s->strstart++; |
| 1689 } else |
| 1690 #endif |
| 1691 { |
| 1692 s->strstart += s->match_length; |
| 1693 s->match_length = 0; |
| 1694 s->ins_h = s->window[s->strstart]; |
| 1695 UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); |
| 1696 #if MIN_MATCH != 3 |
| 1697 Call UPDATE_HASH() MIN_MATCH-3 more times |
| 1698 #endif |
| 1699 /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not |
| 1700 * matter since it will be recomputed at next deflate call. |
| 1701 */ |
| 1702 } |
| 1703 } else { |
| 1704 /* No match, output a literal byte */ |
| 1705 Tracevv((stderr,"%c", s->window[s->strstart])); |
| 1706 _tr_tally_lit (s, s->window[s->strstart], bflush); |
| 1707 s->lookahead--; |
| 1708 s->strstart++; |
| 1709 } |
| 1710 if (bflush) FLUSH_BLOCK(s, 0); |
| 1711 } |
| 1712 s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; |
| 1713 if (flush == Z_FINISH) { |
| 1714 FLUSH_BLOCK(s, 1); |
| 1715 return finish_done; |
| 1716 } |
| 1717 if (s->last_lit) |
| 1718 FLUSH_BLOCK(s, 0); |
| 1719 return block_done; |
| 1720 } |
| 1721 |
| 1722 #ifndef FASTEST |
| 1723 /* =========================================================================== |
| 1724 * Same as above, but achieves better compression. We use a lazy |
| 1725 * evaluation for matches: a match is finally adopted only if there is |
| 1726 * no better match at the next window position. |
| 1727 */ |
| 1728 local block_state deflate_slow(s, flush) |
| 1729 deflate_state *s; |
| 1730 int flush; |
| 1731 { |
| 1732 IPos hash_head; /* head of hash chain */ |
| 1733 int bflush; /* set if current block must be flushed */ |
| 1734 |
| 1735 /* Process the input block. */ |
| 1736 for (;;) { |
| 1737 /* Make sure that we always have enough lookahead, except |
| 1738 * at the end of the input file. We need MAX_MATCH bytes |
| 1739 * for the next match, plus MIN_MATCH bytes to insert the |
| 1740 * string following the next match. |
| 1741 */ |
| 1742 if (s->lookahead < MIN_LOOKAHEAD) { |
| 1743 fill_window(s); |
| 1744 if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { |
| 1745 return need_more; |
| 1746 } |
| 1747 if (s->lookahead == 0) break; /* flush the current block */ |
| 1748 } |
| 1749 |
| 1750 /* Insert the string window[strstart .. strstart+2] in the |
| 1751 * dictionary, and set hash_head to the head of the hash chain: |
| 1752 */ |
| 1753 hash_head = NIL; |
| 1754 if (s->lookahead >= MIN_MATCH) { |
| 1755 INSERT_STRING(s, s->strstart, hash_head); |
| 1756 } |
| 1757 |
| 1758 /* Find the longest match, discarding those <= prev_length. |
| 1759 */ |
| 1760 s->prev_length = s->match_length, s->prev_match = s->match_start; |
| 1761 s->match_length = MIN_MATCH-1; |
| 1762 |
| 1763 if (hash_head != NIL && s->prev_length < s->max_lazy_match && |
| 1764 s->strstart - hash_head <= MAX_DIST(s)) { |
| 1765 /* To simplify the code, we prevent matches with the string |
| 1766 * of window index 0 (in particular we have to avoid a match |
| 1767 * of the string with itself at the start of the input file). |
| 1768 */ |
| 1769 s->match_length = longest_match (s, hash_head); |
| 1770 /* longest_match() sets match_start */ |
| 1771 |
| 1772 if (s->match_length <= 5 && (s->strategy == Z_FILTERED |
| 1773 #if TOO_FAR <= 32767 |
| 1774 || (s->match_length == MIN_MATCH && |
| 1775 s->strstart - s->match_start > TOO_FAR) |
| 1776 #endif |
| 1777 )) { |
| 1778 |
| 1779 /* If prev_match is also MIN_MATCH, match_start is garbage |
| 1780 * but we will ignore the current match anyway. |
| 1781 */ |
| 1782 s->match_length = MIN_MATCH-1; |
| 1783 } |
| 1784 } |
| 1785 /* If there was a match at the previous step and the current |
| 1786 * match is not better, output the previous match: |
| 1787 */ |
| 1788 if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { |
| 1789 uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; |
| 1790 /* Do not insert strings in hash table beyond this. */ |
| 1791 |
| 1792 check_match(s, s->strstart-1, s->prev_match, s->prev_length); |
| 1793 |
| 1794 _tr_tally_dist(s, s->strstart -1 - s->prev_match, |
| 1795 s->prev_length - MIN_MATCH, bflush); |
| 1796 |
| 1797 /* Insert in hash table all strings up to the end of the match. |
| 1798 * strstart-1 and strstart are already inserted. If there is not |
| 1799 * enough lookahead, the last two strings are not inserted in |
| 1800 * the hash table. |
| 1801 */ |
| 1802 s->lookahead -= s->prev_length-1; |
| 1803 s->prev_length -= 2; |
| 1804 do { |
| 1805 if (++s->strstart <= max_insert) { |
| 1806 INSERT_STRING(s, s->strstart, hash_head); |
| 1807 } |
| 1808 } while (--s->prev_length != 0); |
| 1809 s->match_available = 0; |
| 1810 s->match_length = MIN_MATCH-1; |
| 1811 s->strstart++; |
| 1812 |
| 1813 if (bflush) FLUSH_BLOCK(s, 0); |
| 1814 |
| 1815 } else if (s->match_available) { |
| 1816 /* If there was no match at the previous position, output a |
| 1817 * single literal. If there was a match but the current match |
| 1818 * is longer, truncate the previous match to a single literal. |
| 1819 */ |
| 1820 Tracevv((stderr,"%c", s->window[s->strstart-1])); |
| 1821 _tr_tally_lit(s, s->window[s->strstart-1], bflush); |
| 1822 if (bflush) { |
| 1823 FLUSH_BLOCK_ONLY(s, 0); |
| 1824 } |
| 1825 s->strstart++; |
| 1826 s->lookahead--; |
| 1827 if (s->strm->avail_out == 0) return need_more; |
| 1828 } else { |
| 1829 /* There is no previous match to compare with, wait for |
| 1830 * the next step to decide. |
| 1831 */ |
| 1832 s->match_available = 1; |
| 1833 s->strstart++; |
| 1834 s->lookahead--; |
| 1835 } |
| 1836 } |
| 1837 Assert (flush != Z_NO_FLUSH, "no flush?"); |
| 1838 if (s->match_available) { |
| 1839 Tracevv((stderr,"%c", s->window[s->strstart-1])); |
| 1840 _tr_tally_lit(s, s->window[s->strstart-1], bflush); |
| 1841 s->match_available = 0; |
| 1842 } |
| 1843 s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; |
| 1844 if (flush == Z_FINISH) { |
| 1845 FLUSH_BLOCK(s, 1); |
| 1846 return finish_done; |
| 1847 } |
| 1848 if (s->last_lit) |
| 1849 FLUSH_BLOCK(s, 0); |
| 1850 return block_done; |
| 1851 } |
| 1852 #endif /* FASTEST */ |
| 1853 |
| 1854 /* =========================================================================== |
| 1855 * For Z_RLE, simply look for runs of bytes, generate matches only of distance |
| 1856 * one. Do not maintain a hash table. (It will be regenerated if this run of |
| 1857 * deflate switches away from Z_RLE.) |
| 1858 */ |
| 1859 local block_state deflate_rle(s, flush) |
| 1860 deflate_state *s; |
| 1861 int flush; |
| 1862 { |
| 1863 int bflush; /* set if current block must be flushed */ |
| 1864 uInt prev; /* byte at distance one to match */ |
| 1865 Bytef *scan, *strend; /* scan goes up to strend for length of run */ |
| 1866 |
| 1867 for (;;) { |
| 1868 /* Make sure that we always have enough lookahead, except |
| 1869 * at the end of the input file. We need MAX_MATCH bytes |
| 1870 * for the longest run, plus one for the unrolled loop. |
| 1871 */ |
| 1872 if (s->lookahead <= MAX_MATCH) { |
| 1873 fill_window(s); |
| 1874 if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) { |
| 1875 return need_more; |
| 1876 } |
| 1877 if (s->lookahead == 0) break; /* flush the current block */ |
| 1878 } |
| 1879 |
| 1880 /* See how many times the previous byte repeats */ |
| 1881 s->match_length = 0; |
| 1882 if (s->lookahead >= MIN_MATCH && s->strstart > 0) { |
| 1883 scan = s->window + s->strstart - 1; |
| 1884 prev = *scan; |
| 1885 if (prev == *++scan && prev == *++scan && prev == *++scan) { |
| 1886 strend = s->window + s->strstart + MAX_MATCH; |
| 1887 do { |
| 1888 } while (prev == *++scan && prev == *++scan && |
| 1889 prev == *++scan && prev == *++scan && |
| 1890 prev == *++scan && prev == *++scan && |
| 1891 prev == *++scan && prev == *++scan && |
| 1892 scan < strend); |
| 1893 s->match_length = MAX_MATCH - (int)(strend - scan); |
| 1894 if (s->match_length > s->lookahead) |
| 1895 s->match_length = s->lookahead; |
| 1896 } |
| 1897 Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan"); |
| 1898 } |
| 1899 |
| 1900 /* Emit match if have run of MIN_MATCH or longer, else emit literal */ |
| 1901 if (s->match_length >= MIN_MATCH) { |
| 1902 check_match(s, s->strstart, s->strstart - 1, s->match_length); |
| 1903 |
| 1904 _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush); |
| 1905 |
| 1906 s->lookahead -= s->match_length; |
| 1907 s->strstart += s->match_length; |
| 1908 s->match_length = 0; |
| 1909 } else { |
| 1910 /* No match, output a literal byte */ |
| 1911 Tracevv((stderr,"%c", s->window[s->strstart])); |
| 1912 _tr_tally_lit (s, s->window[s->strstart], bflush); |
| 1913 s->lookahead--; |
| 1914 s->strstart++; |
| 1915 } |
| 1916 if (bflush) FLUSH_BLOCK(s, 0); |
| 1917 } |
| 1918 s->insert = 0; |
| 1919 if (flush == Z_FINISH) { |
| 1920 FLUSH_BLOCK(s, 1); |
| 1921 return finish_done; |
| 1922 } |
| 1923 if (s->last_lit) |
| 1924 FLUSH_BLOCK(s, 0); |
| 1925 return block_done; |
| 1926 } |
| 1927 |
| 1928 /* =========================================================================== |
| 1929 * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table. |
| 1930 * (It will be regenerated if this run of deflate switches away from Huffman.) |
| 1931 */ |
| 1932 local block_state deflate_huff(s, flush) |
| 1933 deflate_state *s; |
| 1934 int flush; |
| 1935 { |
| 1936 int bflush; /* set if current block must be flushed */ |
| 1937 |
| 1938 for (;;) { |
| 1939 /* Make sure that we have a literal to write. */ |
| 1940 if (s->lookahead == 0) { |
| 1941 fill_window(s); |
| 1942 if (s->lookahead == 0) { |
| 1943 if (flush == Z_NO_FLUSH) |
| 1944 return need_more; |
| 1945 break; /* flush the current block */ |
| 1946 } |
| 1947 } |
| 1948 |
| 1949 /* Output a literal byte */ |
| 1950 s->match_length = 0; |
| 1951 Tracevv((stderr,"%c", s->window[s->strstart])); |
| 1952 _tr_tally_lit (s, s->window[s->strstart], bflush); |
| 1953 s->lookahead--; |
| 1954 s->strstart++; |
| 1955 if (bflush) FLUSH_BLOCK(s, 0); |
| 1956 } |
| 1957 s->insert = 0; |
| 1958 if (flush == Z_FINISH) { |
| 1959 FLUSH_BLOCK(s, 1); |
| 1960 return finish_done; |
| 1961 } |
| 1962 if (s->last_lit) |
| 1963 FLUSH_BLOCK(s, 0); |
| 1964 return block_done; |
| 1965 } |
| OLD | NEW |