Add copy of opus library in deps/third_party.

opus/silk/float/LPC_analysis_filter_FLP.c

Index: opus/silk/float/LPC_analysis_filter_FLP.c
===================================================================
--- opus/silk/float/LPC_analysis_filter_FLP.c	(revision 0)
+++ opus/silk/float/LPC_analysis_filter_FLP.c	(revision 0)
@@ -0,0 +1,249 @@
+/***********************************************************************
+Copyright (c) 2006-2011, Skype Limited. All rights reserved.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+- Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+- Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+- Neither the name of Internet Society, IETF or IETF Trust, nor the 
+names of specific contributors, may be used to endorse or promote
+products derived from this software without specific prior written
+permission.
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+***********************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <stdlib.h>
+#include "main_FLP.h"
+
+/************************************************/
+/* LPC analysis filter                          */
+/* NB! State is kept internally and the         */
+/* filter always starts with zero state         */
+/* first Order output samples are set to zero   */
+/************************************************/
+
+/* 16th order LPC analysis filter, does not write first 16 samples */
+static inline void silk_LPC_analysis_filter16_FLP(
+          silk_float                 r_LPC[],            /* O    LPC residual signal                     */
+    const silk_float                 PredCoef[],         /* I    LPC coefficients                        */
+    const silk_float                 s[],                /* I    Input signal                            */
+    const opus_int                   length              /* I    Length of input signal                  */
+)
+{
+    opus_int   ix;
+    silk_float LPC_pred;
+    const silk_float *s_ptr;
+
+    for( ix = 16; ix < length; ix++ ) {
+        s_ptr = &s[ix - 1];
+
+        /* short-term prediction */
+        LPC_pred = s_ptr[  0 ]  * PredCoef[ 0 ]  +
+                   s_ptr[ -1 ]  * PredCoef[ 1 ]  +
+                   s_ptr[ -2 ]  * PredCoef[ 2 ]  +
+                   s_ptr[ -3 ]  * PredCoef[ 3 ]  +
+                   s_ptr[ -4 ]  * PredCoef[ 4 ]  +
+                   s_ptr[ -5 ]  * PredCoef[ 5 ]  +
+                   s_ptr[ -6 ]  * PredCoef[ 6 ]  +
+                   s_ptr[ -7 ]  * PredCoef[ 7 ]  +
+                   s_ptr[ -8 ]  * PredCoef[ 8 ]  +
+                   s_ptr[ -9 ]  * PredCoef[ 9 ]  +
+                   s_ptr[ -10 ] * PredCoef[ 10 ] +
+                   s_ptr[ -11 ] * PredCoef[ 11 ] +
+                   s_ptr[ -12 ] * PredCoef[ 12 ] +
+                   s_ptr[ -13 ] * PredCoef[ 13 ] +
+                   s_ptr[ -14 ] * PredCoef[ 14 ] +
+                   s_ptr[ -15 ] * PredCoef[ 15 ];
+
+        /* prediction error */
+        r_LPC[ix] = s_ptr[ 1 ] - LPC_pred;
+    }
+}
+
+/* 12th order LPC analysis filter, does not write first 12 samples */
+static inline void silk_LPC_analysis_filter12_FLP(
+          silk_float                 r_LPC[],            /* O    LPC residual signal                     */
+    const silk_float                 PredCoef[],         /* I    LPC coefficients                        */
+    const silk_float                 s[],                /* I    Input signal                            */
+    const opus_int                   length              /* I    Length of input signal                  */
+)
+{
+    opus_int   ix;
+    silk_float LPC_pred;
+    const silk_float *s_ptr;
+
+    for( ix = 12; ix < length; ix++ ) {
+        s_ptr = &s[ix - 1];
+
+        /* short-term prediction */
+        LPC_pred = s_ptr[  0 ]  * PredCoef[ 0 ]  +
+                   s_ptr[ -1 ]  * PredCoef[ 1 ]  +
+                   s_ptr[ -2 ]  * PredCoef[ 2 ]  +
+                   s_ptr[ -3 ]  * PredCoef[ 3 ]  +
+                   s_ptr[ -4 ]  * PredCoef[ 4 ]  +
+                   s_ptr[ -5 ]  * PredCoef[ 5 ]  +
+                   s_ptr[ -6 ]  * PredCoef[ 6 ]  +
+                   s_ptr[ -7 ]  * PredCoef[ 7 ]  +
+                   s_ptr[ -8 ]  * PredCoef[ 8 ]  +
+                   s_ptr[ -9 ]  * PredCoef[ 9 ]  +
+                   s_ptr[ -10 ] * PredCoef[ 10 ] +
+                   s_ptr[ -11 ] * PredCoef[ 11 ];
+
+        /* prediction error */
+        r_LPC[ix] = s_ptr[ 1 ] - LPC_pred;
+    }
+}
+
+/* 10th order LPC analysis filter, does not write first 10 samples */
+static inline void silk_LPC_analysis_filter10_FLP(
+          silk_float                 r_LPC[],            /* O    LPC residual signal                     */
+    const silk_float                 PredCoef[],         /* I    LPC coefficients                        */
+    const silk_float                 s[],                /* I    Input signal                            */
+    const opus_int                   length              /* I    Length of input signal                  */
+)
+{
+    opus_int   ix;
+    silk_float LPC_pred;
+    const silk_float *s_ptr;
+
+    for( ix = 10; ix < length; ix++ ) {
+        s_ptr = &s[ix - 1];
+
+        /* short-term prediction */
+        LPC_pred = s_ptr[  0 ] * PredCoef[ 0 ]  +
+                   s_ptr[ -1 ] * PredCoef[ 1 ]  +
+                   s_ptr[ -2 ] * PredCoef[ 2 ]  +
+                   s_ptr[ -3 ] * PredCoef[ 3 ]  +
+                   s_ptr[ -4 ] * PredCoef[ 4 ]  +
+                   s_ptr[ -5 ] * PredCoef[ 5 ]  +
+                   s_ptr[ -6 ] * PredCoef[ 6 ]  +
+                   s_ptr[ -7 ] * PredCoef[ 7 ]  +
+                   s_ptr[ -8 ] * PredCoef[ 8 ]  +
+                   s_ptr[ -9 ] * PredCoef[ 9 ];
+
+        /* prediction error */
+        r_LPC[ix] = s_ptr[ 1 ] - LPC_pred;
+    }
+}
+
+/* 8th order LPC analysis filter, does not write first 8 samples */
+static inline void silk_LPC_analysis_filter8_FLP(
+          silk_float                 r_LPC[],            /* O    LPC residual signal                     */
+    const silk_float                 PredCoef[],         /* I    LPC coefficients                        */
+    const silk_float                 s[],                /* I    Input signal                            */
+    const opus_int                   length              /* I    Length of input signal                  */
+)
+{
+    opus_int   ix;
+    silk_float LPC_pred;
+    const silk_float *s_ptr;
+
+    for( ix = 8; ix < length; ix++ ) {
+        s_ptr = &s[ix - 1];
+
+        /* short-term prediction */
+        LPC_pred = s_ptr[  0 ] * PredCoef[ 0 ]  +
+                   s_ptr[ -1 ] * PredCoef[ 1 ]  +
+                   s_ptr[ -2 ] * PredCoef[ 2 ]  +
+                   s_ptr[ -3 ] * PredCoef[ 3 ]  +
+                   s_ptr[ -4 ] * PredCoef[ 4 ]  +
+                   s_ptr[ -5 ] * PredCoef[ 5 ]  +
+                   s_ptr[ -6 ] * PredCoef[ 6 ]  +
+                   s_ptr[ -7 ] * PredCoef[ 7 ];
+
+        /* prediction error */
+        r_LPC[ix] = s_ptr[ 1 ] - LPC_pred;
+    }
+}
+
+/* 6th order LPC analysis filter, does not write first 6 samples */
+static inline void silk_LPC_analysis_filter6_FLP(
+          silk_float                 r_LPC[],            /* O    LPC residual signal                     */
+    const silk_float                 PredCoef[],         /* I    LPC coefficients                        */
+    const silk_float                 s[],                /* I    Input signal                            */
+    const opus_int                   length              /* I    Length of input signal                  */
+)
+{
+    opus_int   ix;
+    silk_float LPC_pred;
+    const silk_float *s_ptr;
+
+    for( ix = 6; ix < length; ix++ ) {
+        s_ptr = &s[ix - 1];
+
+        /* short-term prediction */
+        LPC_pred = s_ptr[  0 ] * PredCoef[ 0 ]  +
+                   s_ptr[ -1 ] * PredCoef[ 1 ]  +
+                   s_ptr[ -2 ] * PredCoef[ 2 ]  +
+                   s_ptr[ -3 ] * PredCoef[ 3 ]  +
+                   s_ptr[ -4 ] * PredCoef[ 4 ]  +
+                   s_ptr[ -5 ] * PredCoef[ 5 ];
+
+        /* prediction error */
+        r_LPC[ix] = s_ptr[ 1 ] - LPC_pred;
+    }
+}
+
+/************************************************/
+/* LPC analysis filter                          */
+/* NB! State is kept internally and the         */
+/* filter always starts with zero state         */
+/* first Order output samples are set to zero   */
+/************************************************/
+void silk_LPC_analysis_filter_FLP(
+    silk_float                      r_LPC[],                            /* O    LPC residual signal                         */
+    const silk_float                PredCoef[],                         /* I    LPC coefficients                            */
+    const silk_float                s[],                                /* I    Input signal                                */
+    const opus_int                  length,                             /* I    Length of input signal                      */
+    const opus_int                  Order                               /* I    LPC order                                   */
+)
+{
+    silk_assert( Order <= length );
+
+    switch( Order ) {
+        case 6:
+            silk_LPC_analysis_filter6_FLP(  r_LPC, PredCoef, s, length );
+        break;
+
+        case 8:
+            silk_LPC_analysis_filter8_FLP(  r_LPC, PredCoef, s, length );
+        break;
+
+        case 10:
+            silk_LPC_analysis_filter10_FLP( r_LPC, PredCoef, s, length );
+        break;
+
+        case 12:
+            silk_LPC_analysis_filter12_FLP( r_LPC, PredCoef, s, length );
+        break;
+
+        case 16:
+            silk_LPC_analysis_filter16_FLP( r_LPC, PredCoef, s, length );
+        break;
+
+        default:
+            silk_assert( 0 );
+        break;
+    }
+
+    /* Set first Order output samples to zero */
+    silk_memset( r_LPC, 0, Order * sizeof( silk_float ) );
+}
+
Property changes on: opus/silk/float/LPC_analysis_filter_FLP.c
___________________________________________________________________
Added: svn:eol-style
   + LF