- Remove JSCRE from the runtime.

runtime/third_party/jscre/pcre_internal.h

Index: runtime/third_party/jscre/pcre_internal.h
===================================================================
--- runtime/third_party/jscre/pcre_internal.h	(revision 44981)
+++ runtime/third_party/jscre/pcre_internal.h	(working copy)
@@ -1,428 +0,0 @@
-/* This is JavaScriptCore's variant of the PCRE library. While this library
-started out as a copy of PCRE, many of the features of PCRE have been
-removed. This library now supports only the regular expression features
-required by the JavaScript language specification, and has only the functions
-needed by JavaScriptCore and the rest of WebKit.
-
-                 Originally written by Philip Hazel
-           Copyright (c) 1997-2006 University of Cambridge
-    Copyright (C) 2002, 2004, 2006, 2007 Apple Inc. All rights reserved.
-
------------------------------------------------------------------------------
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-    * Redistributions of source code must retain the above copyright notice,
-      this list of conditions and the following disclaimer.
-
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-
-    * Neither the name of the University of Cambridge nor the names of its
-      contributors may be used to endorse or promote products derived from
-      this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------------------------
-*/
-
-/* This header contains definitions that are shared between the different
-modules, but which are not relevant to the exported API. This includes some
-functions whose names all begin with "_pcre_". */
-
-#ifndef THIRD_PARTY_JSCRE_PCRE_INTERNAL_H_
-#define THIRD_PARTY_JSCRE_PCRE_INTERNAL_H_
-
-#if defined(_WIN32)
-typedef unsigned __int32 uint32_t;
-#else
-#include <inttypes.h>
-#include <stdint.h>
-#endif
-
-#include <stdarg.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-
-/* Bit definitions for entries in the pcre_ctypes table. */
-
-#define ctype_space   0x01
-#define ctype_xdigit  0x08
-#define ctype_word    0x10   /* alphameric or '_' */
-
-/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
-of bits for a class map. Some classes are built by combining these tables. */
-
-#define cbit_space     0      /* \s */
-#define cbit_digit    32      /* \d */
-#define cbit_word     64      /* \w */
-#define cbit_length   96      /* Length of the cbits table */
-
-/* Offsets of the various tables from the base tables pointer, and
-total length. */
-
-#define lcc_offset      0
-#define fcc_offset    128
-#define cbits_offset  256
-#define ctypes_offset (cbits_offset + cbit_length)
-#define tables_length (ctypes_offset + 128)
-
-#ifndef DFTABLES
-
-// TODO(xxx): Hook this up to something that checks assertions.
-#define ASSERT(x) if (!(x)) abort()
-#define ASSERT_NOT_REACHED() abort()
-
-#ifdef WIN32
-#pragma warning(disable: 4232)
-#pragma warning(disable: 4244)
-#endif
-
-#include "./pcre.h"
-
-/* The value of LINK_SIZE determines the number of bytes used to store links as
-offsets within the compiled regex. The default is 2, which allows for compiled
-patterns up to 64K long. */
-
-#define LINK_SIZE   2
-
-/* Define DEBUG to get debugging output on stdout. */
-
-#if 0
-#define DEBUG
-#endif
-
-/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
-inline, and there are *still* stupid compilers about that don't like indented
-pre-processor statements, or at least there were when I first wrote this. After
-all, it had only been about 10 years then... */
-
-#ifdef DEBUG
-#define DPRINTF(p) printf p
-#else
-#define DPRINTF(p) /*nothing*/
-#endif
-
-namespace dart { namespace jscre {
-
-/* PCRE keeps offsets in its compiled code as 2-byte quantities (always stored
-in big-endian order) by default. These are used, for example, to link from the
-start of a subpattern to its alternatives and its end. The use of 2 bytes per
-offset limits the size of the compiled regex to around 64K, which is big enough
-for almost everybody. However, I received a request for an even bigger limit.
-For this reason, and also to make the code easier to maintain, the storing and
-loading of offsets from the byte string is now handled by the functions that are
-defined here. */
-
-/* PCRE uses some other 2-byte quantities that do not change when the size of
-offsets changes. There are used for repeat counts and for other things such as
-capturing parenthesis numbers in back references. */
-
-static inline void put2ByteValue(unsigned char* opcodePtr, int value) {
-    ASSERT(value >= 0 && value <= 0xFFFF);
-    opcodePtr[0] = value >> 8;
-    opcodePtr[1] = value;
-}
-
-static inline int get2ByteValue(const unsigned char* opcodePtr) {
-    return (opcodePtr[0] << 8) | opcodePtr[1];
-}
-
-static inline void put2ByteValueAndAdvance(unsigned char*& opcodePtr,
-                                           int value) {
-    put2ByteValue(opcodePtr, value);
-    opcodePtr += 2;
-}
-
-static inline void putLinkValueAllowZero(unsigned char* opcodePtr,
-                                         int value) {
-    put2ByteValue(opcodePtr, value);
-}
-
-static inline int getLinkValueAllowZero(const unsigned char* opcodePtr) {
-    return get2ByteValue(opcodePtr);
-}
-
-#define MAX_PATTERN_SIZE (1 << 16)
-
-static inline void putLinkValue(unsigned char* opcodePtr, int value) {
-    ASSERT(value);
-    putLinkValueAllowZero(opcodePtr, value);
-}
-
-static inline int getLinkValue(const unsigned char* opcodePtr) {
-    int value = getLinkValueAllowZero(opcodePtr);
-    ASSERT(value);
-    return value;
-}
-
-static inline void putLinkValueAndAdvance(unsigned char*& opcodePtr,
-                                          int value) {
-    putLinkValue(opcodePtr, value);
-    opcodePtr += LINK_SIZE;
-}
-
-static inline void putLinkValueAllowZeroAndAdvance(unsigned char*& opcodePtr,
-                                                   int value) {
-    putLinkValueAllowZero(opcodePtr, value);
-    opcodePtr += LINK_SIZE;
-}
-
-// FIXME: These are really more of a "compiled regexp state"
-// than "regexp options"
-enum RegExpOptions {
-    UseFirstByteOptimizationOption = 0x40000000,  /* first_byte is set */
-    UseRequiredByteOptimizationOption = 0x20000000,  /* req_byte is set */
-    UseMultiLineFirstByteOptimizationOption = 0x10000000,
-      /* start after \n for multiline */
-    IsAnchoredOption = 0x02000000,  /* can't use partial with this regex */
-    IgnoreCaseOption = 0x00000001,
-    MatchAcrossMultipleLinesOption = 0x00000002
-};
-
-/* Flags added to firstbyte or reqbyte; a "non-literal" item is either a
-variable-length repeat, or a anything other than literal characters. */
-
-#define REQ_IGNORE_CASE 0x0100    /* indicates should ignore case */
-#define REQ_VARY     0x0200    /* reqbyte followed non-literal item */
-
-/* Miscellaneous definitions */
-
-/* Flag bits and data types for the extended class (OP_XCLASS) for classes that
-contain UTF-8 characters with values greater than 255. */
-
-#define XCL_NOT    0x01    /* Flag: this is a negative class */
-#define XCL_MAP    0x02    /* Flag: a 32-byte map is present */
-
-#define XCL_END       0    /* Marks end of individual items */
-#define XCL_SINGLE    1    /* Single item (one multibyte char) follows */
-#define XCL_RANGE     2    /* A range (two multibyte chars) follows */
-
-/* These are escaped items that aren't just an encoding of a particular data
-value such as \n. They must have non-zero values, as check_escape() returns
-their negation. Also, they must appear in the same order as in the opcode
-definitions below, up to ESC_w. The final one must be
-ESC_REF as subsequent values are used for \1, \2, \3, etc. There is are two
-tests in the code for an escape > ESC_b and <= ESC_w to
-detect the types that may be repeated. These are the types that consume
-characters. If any new escapes are put in between that don't consume a
-character, that code will have to change. */
-
-enum { ESC_B = 1, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W, ESC_w, ESC_REF };
-
-/* Opcode table: OP_BRA must be last, as all values >= it are used for brackets
-that extract substrings. Starting from 1 (i.e. after OP_END), the values up to
-OP_EOD must correspond in order to the list of escapes immediately above.
-Note that whenever this list is updated, the two macro definitions that follow
-must also be updated to match. */
-
-#define FOR_EACH_OPCODE(macro) \
-    macro(END) \
-    \
-    macro(NOT_WORD_BOUNDARY) \
-    macro(WORD_BOUNDARY) \
-    macro(NOT_DIGIT) \
-    macro(DIGIT) \
-    macro(NOT_WHITESPACE) \
-    macro(WHITESPACE) \
-    macro(NOT_WORDCHAR) \
-    macro(WORDCHAR) \
-    \
-    macro(NOT_NEWLINE) \
-    \
-    macro(CIRC) \
-    macro(DOLL) \
-    macro(BOL) \
-    macro(EOL) \
-    macro(CHAR) \
-    macro(CHAR_IGNORING_CASE) \
-    macro(ASCII_CHAR) \
-    macro(ASCII_LETTER_IGNORING_CASE) \
-    macro(NOT) \
-    \
-    macro(STAR) \
-    macro(MINSTAR) \
-    macro(PLUS) \
-    macro(MINPLUS) \
-    macro(QUERY) \
-    macro(MINQUERY) \
-    macro(UPTO) \
-    macro(MINUPTO) \
-    macro(EXACT) \
-    \
-    macro(NOTSTAR) \
-    macro(NOTMINSTAR) \
-    macro(NOTPLUS) \
-    macro(NOTMINPLUS) \
-    macro(NOTQUERY) \
-    macro(NOTMINQUERY) \
-    macro(NOTUPTO) \
-    macro(NOTMINUPTO) \
-    macro(NOTEXACT) \
-    \
-    macro(TYPESTAR) \
-    macro(TYPEMINSTAR) \
-    macro(TYPEPLUS) \
-    macro(TYPEMINPLUS) \
-    macro(TYPEQUERY) \
-    macro(TYPEMINQUERY) \
-    macro(TYPEUPTO) \
-    macro(TYPEMINUPTO) \
-    macro(TYPEEXACT) \
-    \
-    macro(CRSTAR) \
-    macro(CRMINSTAR) \
-    macro(CRPLUS) \
-    macro(CRMINPLUS) \
-    macro(CRQUERY) \
-    macro(CRMINQUERY) \
-    macro(CRRANGE) \
-    macro(CRMINRANGE) \
-    \
-    macro(CLASS) \
-    macro(NCLASS) \
-    macro(XCLASS) \
-    \
-    macro(REF) \
-    \
-    macro(ALT) \
-    macro(KET) \
-    macro(KETRMAX) \
-    macro(KETRMIN) \
-    \
-    macro(ASSERT) \
-    macro(ASSERT_NOT) \
-    \
-    macro(BRAZERO) \
-    macro(BRAMINZERO) \
-    macro(BRANUMBER) \
-    macro(BRA)
-
-#define OPCODE_ENUM_VALUE(opcode) OP_##opcode,
-enum { FOR_EACH_OPCODE(OPCODE_ENUM_VALUE) };
-
-/* WARNING WARNING WARNING: There is an implicit assumption in pcre.c and
-study.c that all opcodes are less than 128 in value. This makes handling UTF-8
-character sequences easier. */
-
-/* The highest extraction number before we have to start using additional
-bytes. (Originally PCRE didn't have support for extraction counts higher than
-this number.) The value is limited by the number of opcodes left after OP_BRA,
-i.e. 255 - OP_BRA. We actually set it a bit lower to leave room for additional
-opcodes. */
-
-/* FIXME: Note that OP_BRA + 100 is > 128, so the two comments above
-are in conflict! */
-
-#define EXTRACT_BASIC_MAX  100
-
-/* The index of names and the
-code vector run on as long as necessary after the end. We store an explicit
-offset to the name table so that if a regex is compiled on one host, saved, and
-then run on another where the size of pointers is different, all might still
-be well. For the case of compiled-on-4 and run-on-8, we include an extra
-pointer that is always NULL.
-*/
-
-struct JSRegExp {
-    uint32_t options;
-
-    uint16_t top_bracket;
-    uint16_t top_backref;
-
-    uint16_t first_byte;
-    uint16_t req_byte;
-};
-
-/* Internal shared data tables. These are tables that are used by more than one
- of the exported public functions. They have to be "external" in the C sense,
- but are not part of the PCRE public API. The data for these tables is in the
- pcre_tables.c module. */
-
-#define kjs_pcre_utf8_table1_size 6
-
-extern const int    kjs_pcre_utf8_table1[6];
-extern const int    kjs_pcre_utf8_table2[6];
-extern const int    kjs_pcre_utf8_table3[6];
-extern const unsigned char kjs_pcre_utf8_table4[0x40];
-
-extern const unsigned char kjs_pcre_default_tables[tables_length];
-
-static inline unsigned char toLowerCase(unsigned char c) {
-    static const unsigned char* lowerCaseChars =
-        kjs_pcre_default_tables + lcc_offset;
-    return lowerCaseChars[c];
-}
-
-static inline unsigned char flipCase(unsigned char c) {
-    static const unsigned char* flippedCaseChars =
-        kjs_pcre_default_tables + fcc_offset;
-    return flippedCaseChars[c];
-}
-
-static inline unsigned char classBitmapForChar(unsigned char c) {
-    static const unsigned char* charClassBitmaps =
-        kjs_pcre_default_tables + cbits_offset;
-    return charClassBitmaps[c];
-}
-
-static inline unsigned char charTypeForChar(unsigned char c) {
-    const unsigned char* charTypeMap = kjs_pcre_default_tables + ctypes_offset;
-    return charTypeMap[c];
-}
-
-static inline bool isWordChar(UChar c) {
-    return c < 128 && (charTypeForChar(c) & ctype_word);
-}
-
-static inline bool isSpaceChar(UChar c) {
-    return (c < 128 && (charTypeForChar(c) & ctype_space));
-}
-
-static inline bool isNewline(UChar nl) {
-    return (nl == 0xA || nl == 0xD || nl == 0x2028 || nl == 0x2029);
-}
-
-static inline bool isBracketStartOpcode(unsigned char opcode) {
-    if (opcode >= OP_BRA)
-        return true;
-    switch (opcode) {
-        case OP_ASSERT:
-        case OP_ASSERT_NOT:
-            return true;
-        default:
-            return false;
-    }
-}
-
-static inline void advanceToEndOfBracket(const unsigned char*& opcodePtr) {
-    ASSERT(isBracketStartOpcode(*opcodePtr) || *opcodePtr == OP_ALT);
-    do
-        opcodePtr += getLinkValue(opcodePtr + 1);
-    while (*opcodePtr == OP_ALT);
-}
-
-/* Internal shared functions. These are functions that are used in more
-that one of the source files. They have to have external linkage, but
-but are not part of the public API and so not exported from the library. */
-
-extern int kjs_pcre_ucp_othercase(unsigned);
-extern bool kjs_pcre_xclass(int, const unsigned char*);
-
-} }  // namespace dart::jscre
-#endif
-
-#endif  // THIRD_PARTY_JSCRE_PCRE_INTERNAL_H_