Capture Mozilla's codesighs, for use in executable sizing....

third_party/codesighs/basesummary.unix.bash

Index: third_party/codesighs/basesummary.unix.bash
===================================================================
--- third_party/codesighs/basesummary.unix.bash	(revision 0)
+++ third_party/codesighs/basesummary.unix.bash	(revision 0)
@@ -0,0 +1,254 @@
+#!/bin/bash
+#
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is basesummary.linx.bash code, released
+# Nov 15, 2002.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 2002
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#   Garrett Arch Blythe, 15-November-2002
+#   Simon Fraser <sfraser@netscape.com>
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+#
+# Check for optional objdir
+# 
+if [ "$1" = "-o" ]; then 
+OBJROOT="$2"
+shift
+shift
+else
+OBJROOT="./mozilla"
+fi
+
+if [ "$1" = "-s" ]; then
+SRCROOT="$2"
+shift
+shift
+else
+SRCROOT="./mozilla"
+fi
+
+OSTYPE=`uname -s`
+
+if [ $OSTYPE == "Darwin" ]; then
+MANIFEST="$SRCROOT/embedding/config/basebrowser-mac-macho"
+else
+MANIFEST="$SRCROOT/embedding/config/basebrowser-unix"
+fi
+
+#
+#   A little help for my friends.
+#
+if [ "-h" == "$1" ];then 
+    SHOWHELP="1"
+fi
+if [ "--help" == "$1" ];then 
+    SHOWHELP="1"
+fi
+if [ "" == "$1" ]; then
+    SHOWHELP="1"
+fi
+if [ "" == "$2" ]; then
+    SHOWHELP="1"
+fi
+if [ "" == "$3" ]; then
+    SHOWHELP="1"
+fi
+
+
+#
+#   Show the help if required.
+#
+if [ $SHOWHELP ]; then
+    echo "usage: $0 <save_results> <old_results> <summary>"
+    echo "  <save_results> is a file that will receive the results of this run."
+    echo "    This file can be used in a future run as the old results."
+    echo "  <old_results> is a results file from a previous run."
+    echo "    It is used to diff with current results and come up with a summary"
+    echo "      of changes."
+    echo "    It is OK if the file does not exist, just supply the argument."
+    echo "  <summary> is a file which will contain a human readable report."
+    echo "    This file is most useful by providing more information than the"
+    echo "      normally single digit output of this script."
+    echo ""
+    echo "Run this command from the parent directory of the mozilla tree."
+    echo ""
+    echo "This command will output two numbers to stdout that will represent"
+    echo "  the total size of all code and data, and a delta from the prior."
+    echo "  the old results."
+    echo "For much more detail on size drifts refer to the summary report."
+    echo ""
+    echo "This tool reports on executables listed in the following file:"
+    echo "$MANIFEST"
+    exit
+fi
+
+
+#
+#   Stash our arguments away.
+#
+COPYSORTTSV="$1"
+OLDTSVFILE="$2"
+SUMMARYFILE="$3"
+
+
+#
+#   On Mac OS X, use the --zerodrift option to maptsvdifftool
+#
+if [ $OSTYPE == "Darwin" ]; then
+ZERODRIFT="--zerodrift"
+else
+ZERODRIFT=""
+fi
+
+
+#
+#   Create our temporary directory.
+#   mktemp on Darwin doesn't support -d (suckage)
+#
+if [ $OSTYPE == "Darwin" ]; then
+MYTMPDIR=`mktemp ./codesighs.tmp.XXXXXXXX`
+rm $MYTMPDIR
+mkdir $MYTMPDIR
+else
+MYTMPDIR=`mktemp -d ./codesighs.tmp.XXXXXXXX`
+fi
+
+
+# Check whether we have 'eu-readelf' or 'readelf' available.
+# If we do, it will give more accurate symbol sizes than nm.
+
+if [ $OSTYPE == "Darwin" ]; then
+  USE_READELF=
+else
+READELF_PROG=`which eu-readelf 2>/dev/null | grep /eu-readelf$`
+if test "$READELF_PROG"; then
+  USE_READELF=1
+else
+  READELF_PROG=`which readelf 2>/dev/null | grep /readelf$`
+  if test "$READELF_PROG"; then
+    # Check whether we need -W
+    if readelf --help | grep "\--wide" >&/dev/null; then
+      READELF_PROG="readelf -W"
+    else
+      READELF_PROG="readelf"
+    fi
+    USE_READELF=1
+  else
+    USE_READELF=
+  fi
+fi
+fi
+
+#
+#   Find all relevant files.
+#
+ALLFILES="$MYTMPDIR/allfiles.list"
+grep -v '[\;\[]' < $MANIFEST | grep -v '^$' | sed "s|^|${OBJROOT}/dist/bin/|" > $ALLFILES
+
+
+RAWTSVFILE="$MYTMPDIR/raw.tsv"
+
+if test "$USE_READELF"; then
+export READELF_PROG
+xargs -n 1 $SRCROOT/tools/codesighs/readelf_wrap.pl < $ALLFILES > $RAWTSVFILE
+else
+
+#
+#   Produce the cumulative nm output.
+#   We are very particular on what switches to use.
+#   nm --format=bsd --size-sort --print-file-name --demangle
+#
+#   Darwin (Mac OS X) has a lame nm that we have to wrap in a perl
+#   script to get decent output.
+#
+NMRESULTS="$MYTMPDIR/nm.txt"
+if [ $OSTYPE == "Darwin" ]; then
+xargs -n 1 $SRCROOT/tools/codesighs/nm_wrap_osx.pl < $ALLFILES  > $NMRESULTS 2> /dev/null
+else
+xargs -n 1 nm --format=bsd --size-sort --print-file-name --demangle < $ALLFILES > $NMRESULTS 2> /dev/null
+fi
+
+#
+#   Produce the TSV output.
+#
+$OBJROOT/dist/bin/nm2tsv --input $NMRESULTS > $RAWTSVFILE
+
+fi  # USE_READELF
+
+#
+#   Sort the TSV output for useful diffing and eyeballing in general.
+#
+sort -r $RAWTSVFILE > $COPYSORTTSV
+
+
+#
+#   If a historical file was specified, diff it with our sorted tsv values.
+#   Run it through a tool to summaries the diffs to the module
+#       level report.
+#   Otherwise, generate the module level report from our new data.
+#
+rm -f $SUMMARYFILE
+DIFFFILE="$MYTMPDIR/diff.txt"
+if [ -e $OLDTSVFILE ]; then
+  diff $OLDTSVFILE $COPYSORTTSV > $DIFFFILE
+  $OBJROOT/dist/bin/maptsvdifftool $ZERODRIFT --input $DIFFFILE >> $SUMMARYFILE
+else
+  $OBJROOT/dist/bin/codesighs --modules --input $COPYSORTTSV >> $SUMMARYFILE
+fi
+
+
+#
+#   Output our numbers, that will let tinderbox specify everything all
+#       at once.
+#   First number is in fact the total size of all code and data in the map
+#       files parsed.
+#   Second number, if present, is growth/shrinkage.
+#
+
+if [ $TINDERBOX_OUTPUT ]; then
+    echo -n "__codesize:"
+fi
+$OBJROOT/dist/bin/codesighs --totalonly --input $COPYSORTTSV
+
+if [ -e $DIFFFILE ]; then
+if [ $TINDERBOX_OUTPUT ]; then
+    echo -n "__codesizeDiff:"
+fi
+    $OBJROOT/dist/bin/maptsvdifftool $ZERODRIFT --summary --input $DIFFFILE
+fi
+
+#
+#   Remove our temporary directory.
+#
+rm -rf $MYTMPDIR
Property changes on: third_party/codesighs/basesummary.unix.bash
___________________________________________________________________
Added: svn:executable
   + *