Upgrade chrome's OpenSSL to same version Android ships with.

openssl/crypto/sha/asm/sha1-sparcv9.pl

Index: openssl/crypto/sha/asm/sha1-sparcv9.pl
===================================================================
--- openssl/crypto/sha/asm/sha1-sparcv9.pl	(revision 0)
+++ openssl/crypto/sha/asm/sha1-sparcv9.pl	(revision 0)
@@ -0,0 +1,284 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# Performance improvement is not really impressive on pre-T1 CPU: +8%
+# over Sun C and +25% over gcc [3.3]. While on T1, a.k.a. Niagara, it
+# turned to be 40% faster than 64-bit code generated by Sun C 5.8 and
+# >2x than 64-bit code generated by gcc 3.4. And there is a gimmick.
+# X[16] vector is packed to 8 64-bit registers and as result nothing
+# is spilled on stack. In addition input data is loaded in compact
+# instruction sequence, thus minimizing the window when the code is
+# subject to [inter-thread] cache-thrashing hazard. The goal is to
+# ensure scalability on UltraSPARC T1, or rather to avoid decay when
+# amount of active threads exceeds the number of physical cores.
+
+$bits=32;
+for (@ARGV)	{ $bits=64 if (/\-m64/ || /\-xarch\=v9/); }
+if ($bits==64)	{ $bias=2047; $frame=192; }
+else		{ $bias=0;    $frame=112; }
+
+$output=shift;
+open STDOUT,">$output";
+
+@X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7");
+$rot1m="%g2";
+$tmp64="%g3";
+$Xi="%g4";
+$A="%l0";
+$B="%l1";
+$C="%l2";
+$D="%l3";
+$E="%l4";
+@V=($A,$B,$C,$D,$E);
+$K_00_19="%l5";
+$K_20_39="%l6";
+$K_40_59="%l7";
+$K_60_79="%g5";
+@K=($K_00_19,$K_20_39,$K_40_59,$K_60_79);
+
+$ctx="%i0";
+$inp="%i1";
+$len="%i2";
+$tmp0="%i3";
+$tmp1="%i4";
+$tmp2="%i5";
+
+sub BODY_00_15 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $xi=($i&1)?@X[($i/2)%8]:$Xi;
+
+$code.=<<___;
+	sll	$a,5,$tmp0		!! $i
+	add	@K[$i/20],$e,$e
+	srl	$a,27,$tmp1
+	add	$tmp0,$e,$e
+	and	$c,$b,$tmp0
+	add	$tmp1,$e,$e
+	sll	$b,30,$tmp2
+	andn	$d,$b,$tmp1
+	srl	$b,2,$b
+	or	$tmp1,$tmp0,$tmp1
+	or	$tmp2,$b,$b
+	add	$xi,$e,$e
+___
+if ($i&1 && $i<15) {
+	$code.=
+	"	srlx	@X[(($i+1)/2)%8],32,$Xi\n";
+}
+$code.=<<___;
+	add	$tmp1,$e,$e
+___
+}
+
+sub Xupdate {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i/2;
+
+if ($i&1) {
+$code.=<<___;
+	sll	$a,5,$tmp0		!! $i
+	add	@K[$i/20],$e,$e
+	srl	$a,27,$tmp1
+___
+} else {
+$code.=<<___;
+	sllx	@X[($j+6)%8],32,$Xi	! Xupdate($i)
+	xor	@X[($j+1)%8],@X[$j%8],@X[$j%8]
+	srlx	@X[($j+7)%8],32,$tmp1
+	xor	@X[($j+4)%8],@X[$j%8],@X[$j%8]
+	sll	$a,5,$tmp0		!! $i
+	or	$tmp1,$Xi,$Xi
+	add	@K[$i/20],$e,$e		!!
+	xor	$Xi,@X[$j%8],@X[$j%8]
+	srlx	@X[$j%8],31,$Xi
+	add	@X[$j%8],@X[$j%8],@X[$j%8]
+	and	$Xi,$rot1m,$Xi
+	andn	@X[$j%8],$rot1m,@X[$j%8]
+	srl	$a,27,$tmp1		!!
+	or	$Xi,@X[$j%8],@X[$j%8]
+___
+}
+}
+
+sub BODY_16_19 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+
+	&Xupdate(@_);
+    if ($i&1) {
+	$xi=@X[($i/2)%8];
+    } else {
+	$xi=$Xi;
+	$code.="\tsrlx	@X[($i/2)%8],32,$xi\n";
+    }
+$code.=<<___;
+	add	$tmp0,$e,$e		!!
+	and	$c,$b,$tmp0
+	add	$tmp1,$e,$e
+	sll	$b,30,$tmp2
+	add	$xi,$e,$e
+	andn	$d,$b,$tmp1
+	srl	$b,2,$b
+	or	$tmp1,$tmp0,$tmp1
+	or	$tmp2,$b,$b
+	add	$tmp1,$e,$e
+___
+}
+
+sub BODY_20_39 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $xi;
+	&Xupdate(@_);
+    if ($i&1) {
+	$xi=@X[($i/2)%8];
+    } else {
+	$xi=$Xi;
+	$code.="\tsrlx	@X[($i/2)%8],32,$xi\n";
+    }
+$code.=<<___;
+	add	$tmp0,$e,$e		!!
+	xor	$c,$b,$tmp0
+	add	$tmp1,$e,$e
+	sll	$b,30,$tmp2
+	xor	$d,$tmp0,$tmp1
+	srl	$b,2,$b
+	add	$tmp1,$e,$e
+	or	$tmp2,$b,$b
+	add	$xi,$e,$e
+___
+}
+
+sub BODY_40_59 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $xi;
+	&Xupdate(@_);
+    if ($i&1) {
+	$xi=@X[($i/2)%8];
+    } else {
+	$xi=$Xi;
+	$code.="\tsrlx	@X[($i/2)%8],32,$xi\n";
+    }
+$code.=<<___;
+	add	$tmp0,$e,$e		!!
+	and	$c,$b,$tmp0
+	add	$tmp1,$e,$e
+	sll	$b,30,$tmp2
+	or	$c,$b,$tmp1
+	srl	$b,2,$b
+	and	$d,$tmp1,$tmp1
+	add	$xi,$e,$e
+	or	$tmp1,$tmp0,$tmp1
+	or	$tmp2,$b,$b
+	add	$tmp1,$e,$e
+___
+}
+
+$code.=<<___ if ($bits==64);
+.register	%g2,#scratch
+.register	%g3,#scratch
+___
+$code.=<<___;
+.section	".text",#alloc,#execinstr
+
+.align	32
+.globl	sha1_block_data_order
+sha1_block_data_order:
+	save	%sp,-$frame,%sp
+	sllx	$len,6,$len
+	add	$inp,$len,$len
+
+	or	%g0,1,$rot1m
+	sllx	$rot1m,32,$rot1m
+	or	$rot1m,1,$rot1m
+
+	ld	[$ctx+0],$A
+	ld	[$ctx+4],$B
+	ld	[$ctx+8],$C
+	ld	[$ctx+12],$D
+	ld	[$ctx+16],$E
+	andn	$inp,7,$tmp0
+
+	sethi	%hi(0x5a827999),$K_00_19
+	or	$K_00_19,%lo(0x5a827999),$K_00_19
+	sethi	%hi(0x6ed9eba1),$K_20_39
+	or	$K_20_39,%lo(0x6ed9eba1),$K_20_39
+	sethi	%hi(0x8f1bbcdc),$K_40_59
+	or	$K_40_59,%lo(0x8f1bbcdc),$K_40_59
+	sethi	%hi(0xca62c1d6),$K_60_79
+	or	$K_60_79,%lo(0xca62c1d6),$K_60_79
+
+.Lloop:
+	ldx	[$tmp0+0],@X[0]
+	ldx	[$tmp0+16],@X[2]
+	ldx	[$tmp0+32],@X[4]
+	ldx	[$tmp0+48],@X[6]
+	and	$inp,7,$tmp1
+	ldx	[$tmp0+8],@X[1]
+	sll	$tmp1,3,$tmp1
+	ldx	[$tmp0+24],@X[3]
+	subcc	%g0,$tmp1,$tmp2	! should be 64-$tmp1, but -$tmp1 works too
+	ldx	[$tmp0+40],@X[5]
+	bz,pt	%icc,.Laligned
+	ldx	[$tmp0+56],@X[7]
+
+	sllx	@X[0],$tmp1,@X[0]
+	ldx	[$tmp0+64],$tmp64
+___
+for($i=0;$i<7;$i++)
+{   $code.=<<___;
+	srlx	@X[$i+1],$tmp2,$Xi
+	sllx	@X[$i+1],$tmp1,@X[$i+1]
+	or	$Xi,@X[$i],@X[$i]
+___
+}
+$code.=<<___;
+	srlx	$tmp64,$tmp2,$tmp64
+	or	$tmp64,@X[7],@X[7]
+.Laligned:
+	srlx	@X[0],32,$Xi
+___
+for ($i=0;$i<16;$i++)	{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
+for (;$i<20;$i++)	{ &BODY_16_19($i,@V); unshift(@V,pop(@V)); }
+for (;$i<40;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+for (;$i<60;$i++)	{ &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
+for (;$i<80;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+
+	ld	[$ctx+0],@X[0]
+	ld	[$ctx+4],@X[1]
+	ld	[$ctx+8],@X[2]
+	ld	[$ctx+12],@X[3]
+	add	$inp,64,$inp
+	ld	[$ctx+16],@X[4]
+	cmp	$inp,$len
+
+	add	$A,@X[0],$A
+	st	$A,[$ctx+0]
+	add	$B,@X[1],$B
+	st	$B,[$ctx+4]
+	add	$C,@X[2],$C
+	st	$C,[$ctx+8]
+	add	$D,@X[3],$D
+	st	$D,[$ctx+12]
+	add	$E,@X[4],$E
+	st	$E,[$ctx+16]
+
+	bne	`$bits==64?"%xcc":"%icc"`,.Lloop
+	andn	$inp,7,$tmp0
+
+	ret
+	restore
+.type	sha1_block_data_order,#function
+.size	sha1_block_data_order,(.-sha1_block_data_order)
+.asciz	"SHA1 block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>"
+.align	4
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;