OLD | NEW |
(Empty) | |
| 1 #!/usr/bin/env perl |
| 2 |
| 3 # ==================================================================== |
| 4 # Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL |
| 5 # project. The module is, however, dual licensed under OpenSSL and |
| 6 # CRYPTOGAMS licenses depending on where you obtain it. For further |
| 7 # details see http://www.openssl.org/~appro/cryptogams/. |
| 8 # ==================================================================== |
| 9 |
| 10 # sha1_block for Thumb. |
| 11 # |
| 12 # January 2007. |
| 13 # |
| 14 # The code does not present direct interest to OpenSSL, because of low |
| 15 # performance. Its purpose is to establish _size_ benchmark. Pretty |
| 16 # useless one I must say, because 30% or 88 bytes larger ARMv4 code |
| 17 # [avialable on demand] is almost _twice_ as fast. It should also be |
| 18 # noted that in-lining of .Lcommon and .Lrotate improves performance |
| 19 # by over 40%, while code increases by only 10% or 32 bytes. But once |
| 20 # again, the goal was to establish _size_ benchmark, not performance. |
| 21 |
| 22 $output=shift; |
| 23 open STDOUT,">$output"; |
| 24 |
| 25 $inline=0; |
| 26 #$cheat_on_binutils=1; |
| 27 |
| 28 $t0="r0"; |
| 29 $t1="r1"; |
| 30 $t2="r2"; |
| 31 $a="r3"; |
| 32 $b="r4"; |
| 33 $c="r5"; |
| 34 $d="r6"; |
| 35 $e="r7"; |
| 36 $K="r8"; # "upper" registers can be used in add/sub and mov insns |
| 37 $ctx="r9"; |
| 38 $inp="r10"; |
| 39 $len="r11"; |
| 40 $Xi="r12"; |
| 41 |
| 42 sub common { |
| 43 <<___; |
| 44 sub $t0,#4 |
| 45 ldr $t1,[$t0] |
| 46 add $e,$K @ E+=K_xx_xx |
| 47 lsl $t2,$a,#5 |
| 48 add $t2,$e |
| 49 lsr $e,$a,#27 |
| 50 add $t2,$e @ E+=ROR(A,27) |
| 51 add $t2,$t1 @ E+=X[i] |
| 52 ___ |
| 53 } |
| 54 sub rotate { |
| 55 <<___; |
| 56 mov $e,$d @ E=D |
| 57 mov $d,$c @ D=C |
| 58 lsl $c,$b,#30 |
| 59 lsr $b,$b,#2 |
| 60 orr $c,$b @ C=ROR(B,2) |
| 61 mov $b,$a @ B=A |
| 62 add $a,$t2,$t1 @ A=E+F_xx_xx(B,C,D) |
| 63 ___ |
| 64 } |
| 65 |
| 66 sub BODY_00_19 { |
| 67 $code.=$inline?&common():"\tbl .Lcommon\n"; |
| 68 $code.=<<___; |
| 69 mov $t1,$c |
| 70 eor $t1,$d |
| 71 and $t1,$b |
| 72 eor $t1,$d @ F_00_19(B,C,D) |
| 73 ___ |
| 74 $code.=$inline?&rotate():"\tbl .Lrotate\n"; |
| 75 } |
| 76 |
| 77 sub BODY_20_39 { |
| 78 $code.=$inline?&common():"\tbl .Lcommon\n"; |
| 79 $code.=<<___; |
| 80 mov $t1,$b |
| 81 eor $t1,$c |
| 82 eor $t1,$d @ F_20_39(B,C,D) |
| 83 ___ |
| 84 $code.=$inline?&rotate():"\tbl .Lrotate\n"; |
| 85 } |
| 86 |
| 87 sub BODY_40_59 { |
| 88 $code.=$inline?&common():"\tbl .Lcommon\n"; |
| 89 $code.=<<___; |
| 90 mov $t1,$b |
| 91 and $t1,$c |
| 92 mov $e,$b |
| 93 orr $e,$c |
| 94 and $e,$d |
| 95 orr $t1,$e @ F_40_59(B,C,D) |
| 96 ___ |
| 97 $code.=$inline?&rotate():"\tbl .Lrotate\n"; |
| 98 } |
| 99 |
| 100 $code=<<___; |
| 101 .text |
| 102 .code 16 |
| 103 |
| 104 .global sha1_block_data_order |
| 105 .type sha1_block_data_order,%function |
| 106 |
| 107 .align 2 |
| 108 sha1_block_data_order: |
| 109 ___ |
| 110 if ($cheat_on_binutils) { |
| 111 $code.=<<___; |
| 112 .code 32 |
| 113 add r3,pc,#1 |
| 114 bx r3 @ switch to Thumb ISA |
| 115 .code 16 |
| 116 ___ |
| 117 } |
| 118 $code.=<<___; |
| 119 push {r4-r7} |
| 120 mov r3,r8 |
| 121 mov r4,r9 |
| 122 mov r5,r10 |
| 123 mov r6,r11 |
| 124 mov r7,r12 |
| 125 push {r3-r7,lr} |
| 126 lsl r2,#6 |
| 127 mov $ctx,r0 @ save context |
| 128 mov $inp,r1 @ save inp |
| 129 mov $len,r2 @ save len |
| 130 add $len,$inp @ $len to point at inp end |
| 131 |
| 132 .Lloop: |
| 133 mov $Xi,sp |
| 134 mov $t2,sp |
| 135 sub $t2,#16*4 @ [3] |
| 136 .LXload: |
| 137 ldrb $a,[$t1,#0] @ $t1 is r1 and holds inp |
| 138 ldrb $b,[$t1,#1] |
| 139 ldrb $c,[$t1,#2] |
| 140 ldrb $d,[$t1,#3] |
| 141 lsl $a,#24 |
| 142 lsl $b,#16 |
| 143 lsl $c,#8 |
| 144 orr $a,$b |
| 145 orr $a,$c |
| 146 orr $a,$d |
| 147 add $t1,#4 |
| 148 push {$a} |
| 149 cmp sp,$t2 |
| 150 bne .LXload @ [+14*16] |
| 151 |
| 152 mov $inp,$t1 @ update $inp |
| 153 sub $t2,#32*4 |
| 154 sub $t2,#32*4 |
| 155 mov $e,#31 @ [+4] |
| 156 .LXupdate: |
| 157 ldr $a,[sp,#15*4] |
| 158 ldr $b,[sp,#13*4] |
| 159 ldr $c,[sp,#7*4] |
| 160 ldr $d,[sp,#2*4] |
| 161 eor $a,$b |
| 162 eor $a,$c |
| 163 eor $a,$d |
| 164 ror $a,$e |
| 165 push {$a} |
| 166 cmp sp,$t2 |
| 167 bne .LXupdate @ [+(11+1)*64] |
| 168 |
| 169 ldmia $t0!,{$a,$b,$c,$d,$e} @ $t0 is r0 and holds ctx |
| 170 mov $t0,$Xi |
| 171 |
| 172 ldr $t2,.LK_00_19 |
| 173 mov $t1,$t0 |
| 174 sub $t1,#20*4 |
| 175 mov $Xi,$t1 |
| 176 mov $K,$t2 @ [+7+4] |
| 177 .L_00_19: |
| 178 ___ |
| 179 &BODY_00_19(); |
| 180 $code.=<<___; |
| 181 cmp $Xi,$t0 |
| 182 bne .L_00_19 @ [+(2+9+4+2+8+2)*20] |
| 183 |
| 184 ldr $t2,.LK_20_39 |
| 185 mov $t1,$t0 |
| 186 sub $t1,#20*4 |
| 187 mov $Xi,$t1 |
| 188 mov $K,$t2 @ [+5] |
| 189 .L_20_39_or_60_79: |
| 190 ___ |
| 191 &BODY_20_39(); |
| 192 $code.=<<___; |
| 193 cmp $Xi,$t0 |
| 194 bne .L_20_39_or_60_79 @ [+(2+9+3+2+8+2)*20*2] |
| 195 cmp sp,$t0 |
| 196 beq .Ldone @ [+2] |
| 197 |
| 198 ldr $t2,.LK_40_59 |
| 199 mov $t1,$t0 |
| 200 sub $t1,#20*4 |
| 201 mov $Xi,$t1 |
| 202 mov $K,$t2 @ [+5] |
| 203 .L_40_59: |
| 204 ___ |
| 205 &BODY_40_59(); |
| 206 $code.=<<___; |
| 207 cmp $Xi,$t0 |
| 208 bne .L_40_59 @ [+(2+9+6+2+8+2)*20] |
| 209 |
| 210 ldr $t2,.LK_60_79 |
| 211 mov $Xi,sp |
| 212 mov $K,$t2 |
| 213 b .L_20_39_or_60_79 @ [+4] |
| 214 .Ldone: |
| 215 mov $t0,$ctx |
| 216 ldr $t1,[$t0,#0] |
| 217 ldr $t2,[$t0,#4] |
| 218 add $a,$t1 |
| 219 ldr $t1,[$t0,#8] |
| 220 add $b,$t2 |
| 221 ldr $t2,[$t0,#12] |
| 222 add $c,$t1 |
| 223 ldr $t1,[$t0,#16] |
| 224 add $d,$t2 |
| 225 add $e,$t1 |
| 226 stmia $t0!,{$a,$b,$c,$d,$e} @ [+20] |
| 227 |
| 228 add sp,#80*4 @ deallocate stack frame |
| 229 mov $t0,$ctx @ restore ctx |
| 230 mov $t1,$inp @ restore inp |
| 231 cmp $t1,$len |
| 232 beq .Lexit |
| 233 b .Lloop @ [+6] total 3212 cycles |
| 234 .Lexit: |
| 235 pop {r2-r7} |
| 236 mov r8,r2 |
| 237 mov r9,r3 |
| 238 mov r10,r4 |
| 239 mov r11,r5 |
| 240 mov r12,r6 |
| 241 mov lr,r7 |
| 242 pop {r4-r7} |
| 243 bx lr |
| 244 .align 2 |
| 245 ___ |
| 246 $code.=".Lcommon:\n".&common()."\tmov pc,lr\n" if (!$inline); |
| 247 $code.=".Lrotate:\n".&rotate()."\tmov pc,lr\n" if (!$inline); |
| 248 $code.=<<___; |
| 249 .align 2 |
| 250 .LK_00_19: .word 0x5a827999 |
| 251 .LK_20_39: .word 0x6ed9eba1 |
| 252 .LK_40_59: .word 0x8f1bbcdc |
| 253 .LK_60_79: .word 0xca62c1d6 |
| 254 .size sha1_block_data_order,.-sha1_block_data_order |
| 255 .asciz "SHA1 block transform for Thumb, CRYPTOGAMS by <appro\@openssl.org>" |
| 256 ___ |
| 257 |
| 258 print $code; |
| 259 close STDOUT; # enforce flush |
OLD | NEW |