This change updates the libjingle logging so that it writes to chromiums VLOG instead of its own ...

third_party/libjingle/overrides/talk/base/logging.h

-/*
- * libjingle
- * Copyright 2004--2005, Google Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- *  1. Redistributions of source code must retain the above copyright notice,
- *     this list of conditions and the following disclaimer.
- *  2. Redistributions in binary form must reproduce the above copyright notice,
- *     this list of conditions and the following disclaimer in the documentation
- *     and/or other materials provided with the distribution.
- *  3. The name of the author may not be used to endorse or promote products
- *     derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
- * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
+// Copyright (c) 2012 The Chromium Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
 
-//   LOG(...) an ostream target that can be used to send formatted
-// output to a variety of logging targets, such as debugger console, stderr,
-// file, or any StreamInterface.
-//   The severity level passed as the first argument to the the LOGging
-// functions is used as a filter, to limit the verbosity of the logging.
-//   Static members of LogMessage documented below are used to control the
-// verbosity and target of the output.
-//   There are several variations on the LOG macro which facilitate logging
-// of common error conditions, detailed below.
+// This file overrides the logging macros in libjingle (talk/base/logging.h).
+// Instead of using libjingle's logging implementation, the libjingle macros are
+// mapped to the corresponding base/logging.h macro (chromium's VLOG).
+// If this file is included outside of libjingle (e.g. in wrapper code) it
+// should be included after base/logging.h (if any) or compiler error or
+// unexpected behavior may occur (macros that have the same name in libjingle as
+// in chromium will use the libjingle definition if this file is included
+// first).
 
-// LOG(sev) logs the given stream at severity "sev", which must be a
-//     compile-time constant of the LoggingSeverity type, without the namespace
-//     prefix.
-// LOG_V(sev) Like LOG(), but sev is a run-time variable of the LoggingSeverity
-//     type (basically, it just doesn't prepend the namespace).
-// LOG_F(sev) Like LOG(), but includes the name of the current function.
-// LOG_GLE(M)(sev [, mod]) attempt to add a string description of the
-//     HRESULT returned by GetLastError.  The "M" variant allows searching of a
-//     DLL's string table for the error description.
-// LOG_ERRNO(sev) attempts to add a string description of an errno-derived
-//     error. errno and associated facilities exist on both Windows and POSIX,
-//     but on Windows they only apply to the C/C++ runtime.
-// LOG_ERR(sev) is an alias for the platform's normal error system, i.e. _GLE on
-//     Windows and _ERRNO on POSIX.
-// (The above three also all have _EX versions that let you specify the error
-// code, rather than using the last one.)
-// LOG_E(sev, ctx, err, ...) logs a detailed error interpreted using the
-//     specified context.
-// LOG_CHECK_LEVEL(sev) (and LOG_CHECK_LEVEL_V(sev)) can be used as a test
-//     before performing expensive or sensitive operations whose sole purpose is
-//     to output logging data at the desired level.
-// Lastly, PLOG(sev, err) is an alias for LOG_ERR_EX.
+// Setting the LoggingSeverity (and lower) that should be written to file should
+// be done via command line by specifying the flags:
+// --vmodule or --v please see base/logging.h for details on how to use them.
+// Specifying what file to write to is done using InitLogging also in
+// base/logging.h.
 
-#ifndef TALK_BASE_LOGGING_H_
-#define TALK_BASE_LOGGING_H_
+// The macros and classes declared in here are not described as they are
+// NOT TO BE USED outside of libjingle.
 
-#ifdef HAVE_CONFIG_H
-#include "config.h"  // NOLINT
-#endif
+#ifndef THIRD_PARTY_LIBJINGLE_OVERRIDES_TALK_BASE_LOGGING_H_
+#define THIRD_PARTY_LIBJINGLE_OVERRIDES_TALK_BASE_LOGGING_H_
 
-#include <list>
 #include <sstream>
 #include <string>
-#include <utility>
-#include "talk/base/basictypes.h"
-#include "talk/base/criticalsection.h"
+
+#include "base/logging.h"
 
 namespace talk_base {
 
-class StreamInterface;
-
 ///////////////////////////////////////////////////////////////////////////////
 // ConstantLabel can be used to easily generate string names from constant
 // values.  This can be useful for logging descriptive names of error messages.
 // Usage:
 //   const ConstantLabel LIBRARY_ERRORS[] = {
 //     KLABEL(SOME_ERROR),
 //     KLABEL(SOME_OTHER_ERROR),
 //     ...
 //     LASTLABEL
 //   }
 //
 //   int err = LibraryFunc();
 //   LOG(LS_ERROR) << "LibraryFunc returned: "
 //                 << ErrorName(err, LIBRARY_ERRORS);
 
-struct ConstantLabel { int value; const char * label; };
+struct ConstantLabel {
+  int value;
+  const char* label;
+};
+#define KLABEL(x) { x, #x }
+#define LASTLABEL { 0, 0 }
 
-#if defined(SAFE_TO_DEFINE_TALK_BASE_LOGGING_MACROS)
-#define KLABEL(x) { x, #x }
-#define TLABEL(x, y) { x, y }
-#define LASTLABEL { 0, 0 }
-#endif  // defined(SAFE_TO_DEFINE_TALK_BASE_LOGGING_MACROS)
-
-const char * FindLabel(int value, const ConstantLabel entries[]);
+const char* FindLabel(int value, const ConstantLabel entries[]);
 std::string ErrorName(int err, const ConstantLabel* err_table);
 
 //////////////////////////////////////////////////////////////////////
-
 // Note that the non-standard LoggingSeverity aliases exist because they are
 // still in broad use.  The meanings of the levels are:
 //  LS_SENSITIVE: Information which should only be logged with the consent
 //   of the user, due to privacy concerns.
 //  LS_VERBOSE: This level is for data which we do not want to appear in the
 //   normal debug log, but should appear in diagnostic logs.
 //  LS_INFO: Chatty level used in debugging for all sorts of things, the default
 //   in debug builds.
 //  LS_WARNING: Something that may warrant investigation.
 //  LS_ERROR: Something that should not have occurred.
-enum LoggingSeverity { LS_SENSITIVE, LS_VERBOSE, LS_INFO, LS_WARNING, LS_ERROR,
+// Note that LoggingSeverity is mapped over to chromiums verbosity levels where
+// anything lower than or equal to the current verbosity level is written to
+// file which is the opposite of logging severity in libjingle where higher
+// severity numbers than or equal to the current severity level are written to
+// file. Also, note that the values are explicitly defined here for convenience
+// since the command line flag must be set using numerical values.
+enum LoggingSeverity { LS_ERROR = 1,
+                       LS_WARNING = 2,
+                       LS_INFO = 3,
+                       LS_VERBOSE = 4,
+                       LS_SENSITIVE = 5,
                        INFO = LS_INFO,
                        WARNING = LS_WARNING,
                        LERROR = LS_ERROR };
 
 // LogErrorContext assists in interpreting the meaning of an error value.
 enum LogErrorContext {
   ERRCTX_NONE,
   ERRCTX_ERRNO,     // System-local errno
   ERRCTX_HRESULT,   // Windows HRESULT
   ERRCTX_OSSTATUS,  // MacOS OSStatus
 
   // Abbreviations for LOG_E macro
   ERRCTX_EN = ERRCTX_ERRNO,     // LOG_E(sev, EN, x)
   ERRCTX_HR = ERRCTX_HRESULT,   // LOG_E(sev, HR, x)
   ERRCTX_OS = ERRCTX_OSSTATUS,  // LOG_E(sev, OS, x)
 };
 
-class LogMessage {
+// Class that makes it possible describe a LOG_E message as a single string.
+// I.e. the format that VLOG is expecting.
+class LogEHelper {
  public:
-  static const int NO_LOGGING;
+  LogEHelper(const char* file, int line, LoggingSeverity severity,
+             LogErrorContext err_ctx, int err, const char* module = NULL);
+  ~LogEHelper();
 
-  LogMessage(const char* file, int line, LoggingSeverity sev,
-             LogErrorContext err_ctx = ERRCTX_NONE, int err = 0,
-             const char* module = NULL);
-  ~LogMessage();
-
-  static inline bool Loggable(LoggingSeverity sev) { return (sev >= min_sev_); }
   std::ostream& stream() { return print_stream_; }
 
-  // These are attributes which apply to all logging channels
-  //  LogContext: Display the file and line number of the message
-  static void LogContext(int min_sev);
-  //  LogThreads: Display the thread identifier of the current thread
-  static void LogThreads(bool on = true);
-  //  LogTimestamps: Display the elapsed time of the program
-  static void LogTimestamps(bool on = true);
+ private:
+  const std::string file_name_;
+  const int line_;
 
-  // Timestamps begin with program execution, but can be reset with this
-  // function for measuring the duration of an activity, or to synchronize
-  // timestamps between multiple instances.
-  static void ResetTimestamps();
+  std::string extra_;
+  const LoggingSeverity severity_;
 
-  // These are the available logging channels
-  //  Debug: Debug console on Windows, otherwise stderr
-  static void LogToDebug(int min_sev);
-  static int GetLogToDebug() { return dbg_sev_; }
+  std::ostringstream print_stream_;
+};
 
-  //  Stream: Any non-blocking stream interface.  LogMessage takes ownership of
-  //   the stream. Multiple streams may be specified by using AddLogToStream.
-  //   LogToStream is retained for backwards compatibility; when invoked, it
-  //   will discard any previously set streams and install the specified stream.
-  //   GetLogToStream gets the severity for the specified stream, of if none
-  //   is specified, the minimum stream severity.
-  //   RemoveLogToStream removes the specified stream, without destroying it.
-  static void LogToStream(StreamInterface* stream, int min_sev);
-  static int GetLogToStream(StreamInterface* stream = NULL);
-  static void AddLogToStream(StreamInterface* stream, int min_sev);
-  static void RemoveLogToStream(StreamInterface* stream);
-
-  // Testing against MinLogSeverity allows code to avoid potentially expensive
-  // logging operations by pre-checking the logging level.
-  static int GetMinLogSeverity() { return min_sev_; }
-
-  static void SetDiagnosticMode(bool f) { is_diagnostic_mode_ = f; }
-  static bool IsDiagnosticMode() { return is_diagnostic_mode_; }
-
-  // Parses the provided parameter stream to configure the options above.
-  // Useful for configuring logging from the command line.  If file logging
-  // is enabled, it is output to the specified filename.
-  static void ConfigureLogging(const char* params, const char* filename);
-
-  // Convert the string to a LS_ value; also accept numeric values.
-  static int ParseLogSeverity(const std::string& value);
-
- private:
-  typedef std::list<std::pair<StreamInterface*, int> > StreamList;
-
-  // Updates min_sev_ appropriately when debug sinks change.
-  static void UpdateMinLogSeverity();
-
-  // These assist in formatting some parts of the debug output.
-  static const char* Describe(LoggingSeverity sev);
-  static const char* DescribeFile(const char* file);
-
-  // These write out the actual log messages.
-  static void OutputToDebug(const std::string& msg, LoggingSeverity severity_);
-  static void OutputToStream(StreamInterface* stream, const std::string& msg);
-
-  // The ostream that buffers the formatted message before output
-  std::ostringstream print_stream_;
-
-  // The severity level of this message
-  LoggingSeverity severity_;
-
-  // String data generated in the constructor, that should be appended to
-  // the message before output.
-  std::string extra_;
-
-  // Global lock for the logging subsystem
-  static CriticalSection crit_;
-
-  // dbg_sev_ is the thresholds for those output targets
-  // min_sev_ is the minimum (most verbose) of those levels, and is used
-  //  as a short-circuit in the logging macros to identify messages that won't
-  //  be logged.
-  // ctx_sev_ is the minimum level at which file context is displayed
-  static int min_sev_, dbg_sev_, ctx_sev_;
-
-  // The output streams and their associated severities
-  static StreamList streams_;
-
-  // Flags for formatting options
-  static bool thread_, timestamp_;
-
-  // The timestamp at which logging started.
-  static uint32 start_;
-
-  // are we in diagnostic mode (as defined by the app)?
-  static bool is_diagnostic_mode_;
-
-  DISALLOW_COPY_AND_ASSIGN(LogMessage);
+// This class is used to explicitly ignore values in the conditional
+// logging macros.  This avoids compiler warnings like "value computed
+// is not used" and "statement has no effect".
+class LogMessageVoidify {
+ public:
+  LogMessageVoidify() { }
+  // This has to be an operator with a precedence lower than << but
+  // higher than ?:
+  void operator&(std::ostream&) { }
 };
 
 //////////////////////////////////////////////////////////////////////
 // Logging Helpers
 //////////////////////////////////////////////////////////////////////
 
 class LogMultilineState {
  public:
   size_t unprintable_count_[2];
   LogMultilineState() {
     unprintable_count_[0] = unprintable_count_[1] = 0;
   }
 };
 
 // When possible, pass optional state variable to track various data across
 // multiple calls to LogMultiline.  Otherwise, pass NULL.
 void LogMultiline(LoggingSeverity level, const char* label, bool input,
                   const void* data, size_t len, bool hex_mode,
                   LogMultilineState* state);
 
+}  // namespace talk_base
+
 //////////////////////////////////////////////////////////////////////
-// Macros which automatically disable logging when LOGGING == 0
+// Libjingle macros which are mapped over to their VLOG equivalent in
+// base/logging.h
 //////////////////////////////////////////////////////////////////////
 
-// If LOGGING is not explicitly defined, default to enabled in debug mode
-#if defined(SAFE_TO_DEFINE_TALK_BASE_LOGGING_MACROS)
-#if !defined(LOGGING)
-#if defined(_DEBUG) && !defined(NDEBUG) && !defined(NO_LIBJINGLE_LOGGING)
-#define LOGGING 1
-#else
-#define LOGGING 0
-#endif
-#endif  // !defined(LOGGING)
+#ifdef LOGGING_INSIDE_LIBJINGLE

[Sergey Ulanov, 2012/01/12 00:11:36]

#if defined(LOGGING_INSIDE_LIBJINGLE)

[hellner, 2012/01/13 00:34:43]

Done.

 
-#ifndef LOG
-#if LOGGING
+#define LOG_CHECK_LEVEL(sev) VLOG_IS_ON(talk_base::sev)
+#define LOG_CHECK_LEVEL_V(sev) VLOG_IS_ON(sev)
 
-// The following non-obvious technique for implementation of a
-// conditional log stream was stolen from google3/base/logging.h.
-
-// This class is used to explicitly ignore values in the conditional
-// logging macros.  This avoids compiler warnings like "value computed
-// is not used" and "statement has no effect".
-
-class LogMessageVoidify {
- public:
-  LogMessageVoidify() { }
-  // This has to be an operator with a precedence lower than << but
-  // higher than ?:
-  void operator&(std::ostream&) { }
-};
-
-#define LOG_SEVERITY_PRECONDITION(sev) \
-  !(talk_base::LogMessage::Loggable(sev)) \
-    ? (void) 0 \
-    : talk_base::LogMessageVoidify() &
-
-#define LOG(sev) \
-  LOG_SEVERITY_PRECONDITION(talk_base::sev) \
-    talk_base::LogMessage(__FILE__, __LINE__, talk_base::sev).stream()
-
-// The _V version is for when a variable is passed in.  It doesn't do the
-// namespace concatination.
-#define LOG_V(sev) \
-  LOG_SEVERITY_PRECONDITION(sev) \
-    talk_base::LogMessage(__FILE__, __LINE__, sev).stream()
+#define LOG_V(sev) VLOG(sev)
+#undef LOG
+#define LOG(sev) LOG_V(talk_base::sev)
 
 // The _F version prefixes the message with the current function name.
 #if defined(__GNUC__) && defined(_DEBUG)
 #define LOG_F(sev) LOG(sev) << __PRETTY_FUNCTION__ << ": "
 #else
 #define LOG_F(sev) LOG(sev) << __FUNCTION__ << ": "
 #endif
 
-#define LOG_CHECK_LEVEL(sev) \
-  talk_base::LogCheckLevel(talk_base::sev)
-#define LOG_CHECK_LEVEL_V(sev) \
-  talk_base::LogCheckLevel(sev)
-inline bool LogCheckLevel(LoggingSeverity sev) {
-  return (LogMessage::GetMinLogSeverity() <= sev);
-}
+#define LOG_E(sev, ctx, err, ...) \
+  LAZY_STREAM(talk_base::LogEHelper(__FILE__, __LINE__, talk_base::sev, \
+                                    talk_base::ERRCTX_ ## ctx, err , \
+                                    ##__VA_ARGS__).stream(), \
+              LOG_CHECK_LEVEL_V(talk_base::sev))
 
-#define LOG_E(sev, ctx, err, ...) \
-  LOG_SEVERITY_PRECONDITION(talk_base::sev) \
-    talk_base::LogMessage(__FILE__, __LINE__, talk_base::sev, \
-                          talk_base::ERRCTX_ ## ctx, err , ##__VA_ARGS__) \
-        .stream()
-
-#else  // !LOGGING
-
-// Hopefully, the compiler will optimize away some of this code.
-// Note: syntax of "1 ? (void)0 : LogMessage" was causing errors in g++,
-//   converted to "while (false)"
-#define LOG(sev) \
-  while (false)talk_base:: LogMessage(NULL, 0, talk_base::sev).stream()
-#define LOG_V(sev) \
-  while (false) talk_base::LogMessage(NULL, 0, sev).stream()
-#define LOG_F(sev) LOG(sev) << __FUNCTION__ << ": "
-#define LOG_CHECK_LEVEL(sev) \
-  false
-#define LOG_CHECK_LEVEL_V(sev) \
-  false
-
-#define LOG_E(sev, ctx, err, ...) \
-  while (false) talk_base::LogMessage(__FILE__, __LINE__, talk_base::sev, \
-                          talk_base::ERRCTX_ ## ctx, err , ##__VA_ARGS__) \
-      .stream()
-
-#endif  // !LOGGING
-
-#define LOG_ERRNO_EX(sev, err) \
-  LOG_E(sev, ERRNO, err)
-#define LOG_ERRNO(sev) \
-  LOG_ERRNO_EX(sev, errno)
+#undef LOG_ERRNO_EX
+#define LOG_ERRNO_EX(sev, err) LOG_E(sev, ERRNO, err)
+#undef LOG_ERRNO
+#define LOG_ERRNO(sev) LOG_ERRNO_EX(sev, errno)
 
 #ifdef WIN32

[Sergey Ulanov, 2012/01/12 00:11:36]

#if defined(OS_WIN)

[hellner, 2012/01/13 00:34:43]

Done.

-#define LOG_GLE_EX(sev, err) \
-  LOG_E(sev, HRESULT, err)
-#define LOG_GLE(sev) \
-  LOG_GLE_EX(sev, GetLastError())
-#define LOG_GLEM(sev, mod) \
-  LOG_E(sev, HRESULT, GetLastError(), mod)
-#define LOG_ERR_EX(sev, err) \
-  LOG_GLE_EX(sev, err)
-#define LOG_ERR(sev) \
-  LOG_GLE(sev)
-#define LAST_SYSTEM_ERROR \
-  (::GetLastError())
+#define LOG_GLE_EX(sev, err) LOG_E(sev, HRESULT, err)
+#define LOG_GLE(sev) LOG_GLE_EX(sev, GetLastError())
+#define LOG_GLEM(sev, mod) LOG_E(sev, HRESULT, GetLastError(), mod)
+#define LOG_ERR_EX(sev, err) LOG_GLE_EX(sev, err)
+#define LOG_ERR(sev) LOG_GLE(sev)
+#define LAST_SYSTEM_ERROR (::GetLastError())
 #elif POSIX

[Sergey Ulanov, 2012/01/12 00:11:36]

#else

[hellner, 2012/01/13 00:34:43]

Done.

-#define LOG_ERR_EX(sev, err) \
-  LOG_ERRNO_EX(sev, err)
-#define LOG_ERR(sev) \
-  LOG_ERRNO(sev)
-#define LAST_SYSTEM_ERROR \
-  (errno)
+#define LOG_ERR_EX(sev, err) LOG_ERRNO_EX(sev, err)
+#define LOG_ERR(sev) LOG_ERRNO(sev)
+#define LAST_SYSTEM_ERROR (errno)
 #endif  // WIN32
 
-#define PLOG(sev, err) \
-  LOG_ERR_EX(sev, err)
+#undef PLOG
+#define PLOG(sev, err) LOG_ERR_EX(sev, err)
 
-// TODO(?): Add an "assert" wrapper that logs in the same manner.
+#endif  // LOGGING_INSIDE_LIBJINGLE
 
-#endif  // LOG
-#endif  // defined(SAFE_TO_DEFINE_TALK_BASE_LOGGING_MACROS)
-
-}  // namespace talk_base
-
-#endif  // TALK_BASE_LOGGING_H_
+#endif  // THIRD_PARTY_LIBJINGLE_OVERRIDES_TALK_BASE_LOGGING_H_