Remove NaCl file from ppapi_geturl test.

ppapi/native_client/tests/ppapi_geturl/nacl_file_main.cc

Index: ppapi/native_client/tests/ppapi_geturl/nacl_file_main.cc
===================================================================
--- ppapi/native_client/tests/ppapi_geturl/nacl_file_main.cc	(revision 110348)
+++ ppapi/native_client/tests/ppapi_geturl/nacl_file_main.cc	(working copy)
@@ -1,214 +0,0 @@
-// Copyright (c) 2011 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-//
-// Tests nacl_file library.
-//
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <pthread.h>
-#include <unistd.h>
-
-#include "native_client/src/include/nacl_base.h"
-#include "native_client/src/include/nacl_macros.h"
-#include "native_client/src/shared/platform/nacl_check.h"
-#include "native_client/src/shared/ppapi_proxy/utility.h"
-#include "native_client/src/untrusted/ppapi/nacl_file.h"
-
-using ppapi_proxy::DebugPrintf;
-
-struct ThreadInfo {
-  bool threaded;
-  unsigned int rseed;
-};
-
-// Open and read a valid existing file into a buffer.
-// Return the number of bytes read.
-int test_nacl_file_read_into_buffer(ThreadInfo* info,
-                                    int buffer_size,
-                                    char* buffer) {
-  // Valid url should be open and read without errors.
-  int fd = open("ppapi_geturl_success.html", O_RDONLY);
-  CHECK(fd >= 0);
-  int bytes_read = read(fd, buffer, buffer_size);
-  CHECK(215 == bytes_read);
-  CHECK(strstr(buffer, "TEST PASSED") == buffer);
-  close(fd);
-  if (!info->threaded) {
-    // This part of the test only works when run in a single thread.  In a
-    // multi-threaded test, between the close (above) and read (below), another
-    // thread could recycle the fd.  In a single threaded test, the read below
-    // should fail because the fd was just closed.
-    bytes_read = read(fd, buffer, buffer_size);
-    CHECK(-1 == bytes_read);
-  }
-  return bytes_read;
-}
-
-// Open and read a valid existing file.
-void test_nacl_file_basic_read(ThreadInfo* info) {
-  char buffer[256];
-  test_nacl_file_read_into_buffer(info, sizeof(buffer), buffer);
-}
-
-// Do some basic lseek tests on a valid file.
-void test_nacl_file_basic_lseek() {
-  char buffer[256];
-  // Some of these seeks are relative, and may depend on results of previous
-  // seeks.
-  int fd = open("ppapi_geturl_success.html", O_RDONLY);
-  CHECK(fd >= 0);
-  off_t start = lseek(fd, 0, SEEK_SET);
-  CHECK(0 == start);
-  off_t end = lseek(fd, 0, SEEK_END);
-  CHECK(end > 0);
-  off_t start2 = lseek(fd, -end, SEEK_CUR);
-  CHECK(0 == start2);
-  off_t end2 = lseek(fd, end, SEEK_CUR);
-  CHECK(end2 == end);
-  off_t end3 = lseek(fd, end, SEEK_SET);
-  CHECK(end3 == end);
-  off_t pos1 = lseek(fd, -2, SEEK_CUR);
-  off_t pos2 = lseek(fd, 0, SEEK_CUR);
-  CHECK(pos1 == pos2);
-  lseek(fd, 1, SEEK_CUR);
-  off_t end4 = lseek(fd, 1, SEEK_CUR);
-  CHECK(end4 == end);
-  off_t beyond = lseek(fd, 100, SEEK_END);
-  CHECK((end + 100) == beyond);
-  off_t invalid_offset = lseek(fd, -2, SEEK_SET);
-  CHECK(-1 == invalid_offset);
-  CHECK(EINVAL == errno);
-  off_t beyond2 = lseek(fd, 0, SEEK_CUR);
-  CHECK(beyond2 == beyond);
-  off_t badfd = lseek(1234567, 0, SEEK_SET);
-  CHECK(-1 == badfd);
-  CHECK(EBADF == errno);
-  // Seek back to start and try same read test again.
-  CHECK(lseek(fd, 0, SEEK_SET) == 0);
-  int bytes_read = read(fd, buffer, sizeof(buffer));
-  CHECK(215 == bytes_read);
-  CHECK(strstr(buffer, "TEST PASSED") == buffer);
-  off_t off = lseek(fd, 0, SEEK_END);
-  CHECK(215 == off);
-  close(fd);
-}
-
-// Briefly test the fopen() and friends interface built on top of lower-
-// level open() and friends.
-void test_nacl_file_fopen() {
-  FILE* f = fopen("ppapi_geturl_success.html", "r");
-  CHECK(NULL != f);
-  char buffer[256];
-  char* pbuffer = fgets(buffer, sizeof(buffer), f);
-  CHECK(pbuffer == buffer);
-  fclose(f);
-  int compare = strcmp(buffer, "TEST PASSED\n");
-  CHECK(0 == compare);
-}
-
-// Do a blizzard of small, random file operations.  Randomly seek
-// and read a byte many times, comparing the read result against the
-// whole buffer that was read earlier.  Do this against a random number of
-// simultaniously temporarily open files.
-void test_nacl_file_many_times(ThreadInfo* info) {
-  int bytes_read;
-  char buffer[256];
-  bytes_read = test_nacl_file_read_into_buffer(info, sizeof(buffer), buffer);
-  const int kNumOuterLoop = 20;
-  const int kNumMaxFilesOpen = 10;
-  const int kNumRandomReads = 500;
-  for (int i = 0; i < kNumOuterLoop; ++i) {
-    int file[kNumMaxFilesOpen];
-    int num_open = rand_r(&info->rseed) % (kNumMaxFilesOpen - 1) + 1;
-    CHECK(0 < num_open);
-    CHECK(kNumMaxFilesOpen > num_open);
-    for (int j = 0; j < num_open; ++j) {
-      file[j] = open("ppapi_geturl_success.html", O_RDONLY);
-      CHECK(-1 != file[j]);
-    }
-    int num_reads = rand_r(&info->rseed) % kNumRandomReads;
-    for (int k = 0; k < num_reads; ++k) {
-      char a_byte;
-      const int which_file = rand_r(&info->rseed) % num_open;
-      const int which_byte = rand_r(&info->rseed) % bytes_read;
-      int r = lseek(file[which_file], which_byte, SEEK_SET);
-      CHECK(which_byte == r);
-      size_t num_read = read(file[which_file], &a_byte, sizeof(a_byte));
-      CHECK(1 == num_read);
-      CHECK(a_byte == buffer[which_byte]);
-    }
-    for (int j = 0; j < num_open; ++j) {
-      close(file[j]);
-    }
-  }
-}
-
-// Test nacl_file library functions that override standard POSIX file I/O
-// functions and are intended to have the same behavior.
-void* test_nacl_file_thread(void* user_data) {
-  ThreadInfo* info = reinterpret_cast<ThreadInfo*>(user_data);
-  test_nacl_file_basic_read(info);
-  test_nacl_file_basic_lseek();
-  test_nacl_file_basic_read(info);
-  // Cross origin url should fail on open.
-  int fd = open("http://www.google.com/robots.txt", O_RDONLY);
-  CHECK(-1 == fd);
-  // Invalid url should fail on open.
-  fd = open("doesnotexist.html", O_RDONLY);
-  CHECK(-1 == fd);
-#if defined(__native_client__)
-  // Open for write should fail in NaCl.
-  int no_fd = open("ppapi_geturl_success.html", O_CREAT);
-  CHECK(-1 == no_fd);
-  CHECK(EACCES == errno);
-#endif
-  test_nacl_file_fopen();
-  test_nacl_file_many_times(info);
-  return NULL;
-}
-
-// Main entry point to test nacl_file library. It is assumed that before calling
-// this function, LoadUrl() has been invoked for each file to be tested, and
-// that the completion callback has been reached.
-void test_nacl_file() {
-  const char *nacl_enable_ppapi_dev = getenv("NACL_ENABLE_PPAPI_DEV");
-  int enabled = 0;
-  // Skip test if NACL_ENABLE_PPAPI_DEV is unset or set to 0.
-  if (NULL != nacl_enable_ppapi_dev)
-    enabled = strtol(nacl_enable_ppapi_dev, (char **) 0, 0);
-  if (enabled == 0) {
-    DebugPrintf("Skipping NaCl File test, NACL_ENABLE_PPAPI_DEV not set.\n");
-    return;
-  }
-  const int kNumThreads = 8;
-  pthread_t thread[kNumThreads];
-  ThreadInfo info;
-  unsigned int rseed = 123456;
-  info.threaded = false;
-  info.rseed = rand_r(&rseed);
-  // Run the test once from the main thread, as the only thread.
-  test_nacl_file_thread(&info);
-  info.threaded = true;
-  // The following test creates threads to test basic file I/O.
-  // This way we can also ensure that the abstraction is not broken if one
-  // tries to open/manipulate/close the same NaClFile more then once.
-  for (int i = 0; i < kNumThreads; ++i) {
-    info.rseed = rand_r(&rseed);
-    int p = pthread_create(&thread[i], NULL, test_nacl_file_thread, &info);
-    CHECK(0 == p);
-  }
-  // Run the test from the main thread again, this time competing with
-  // the other threads.
-  info.rseed = rand_r(&rseed);
-  test_nacl_file_thread(&info);
-  // Give the threads a chance to start racing before joining them.
-  usleep(100000);
-  for (int i = 0; i < kNumThreads; ++i) {
-    pthread_join(thread[i], NULL);
-  }
-}