Allow signing EC certs and creating EC origin-bound certs.

crypto/third_party/nss/secsign.cc

Index: crypto/third_party/nss/secsign.cc
diff --git a/crypto/third_party/nss/secsign.cc b/crypto/third_party/nss/secsign.cc
new file mode 100644
index 0000000000000000000000000000000000000000..7b65de1716c5fa7a83e62d86d0c804b1251271ce
--- /dev/null
+++ b/crypto/third_party/nss/secsign.cc
@@ -0,0 +1,131 @@
+/*
+ * Signature stuff.
+ *
+ * ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape security libraries.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1994-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "crypto/third_party/nss/chromium-nss.h"
+
+#include <vector>
+
+#include <cryptohi.h>
+#include <pk11pub.h>
+#include <sechash.h>
+
+#include "base/basictypes.h"
+#include "base/logging.h"
+#include "build/build_config.h"
+
+SECStatus DerSignData(PLArenaPool *arena,
+                      SECItem *result,
+                      SECItem *input,
+                      SECKEYPrivateKey *key,
+                      SECOidTag algo_id) {
+#if defined(OS_WIN) || defined(OS_MACOSX)
+  return SEC_DerSignData(arena, result, input->data, input->len, key, algo_id);
+#else
+  if (key->keyType != ecKey)

[wtc, 2011/11/15 03:10:57]

Add curly braces around the return statement because it is
two lines.

[mattm, 2011/11/15 05:42:31]

Done.

+    return SEC_DerSignData(arena, result, input->data, input->len, key,
+                           algo_id);
+
+  // NSS has a private function sec_DecodeSigAlg it uses to figure out the
+  // correct hash from the algorithm id.
+  HASH_HashType hash_type;
+  switch (algo_id) {
+    case SEC_OID_ANSIX962_ECDSA_SHA1_SIGNATURE:
+      hash_type = HASH_AlgSHA1;
+      break;
+#ifdef SHA224_LENGTH
+    case SEC_OID_ANSIX962_ECDSA_SHA224_SIGNATURE:
+      hash_type = HASH_AlgSHA224;
+      break;
+#endif
+    case SEC_OID_ANSIX962_ECDSA_SHA256_SIGNATURE:
+      hash_type = HASH_AlgSHA256;
+      break;
+    case SEC_OID_ANSIX962_ECDSA_SHA384_SIGNATURE:
+      hash_type = HASH_AlgSHA384;
+      break;
+    case SEC_OID_ANSIX962_ECDSA_SHA512_SIGNATURE:
+      hash_type = HASH_AlgSHA512;
+      break;
+    default:
+      return SECFailure;

[wtc, 2011/11/15 03:10:57]

Please call PORT_SetError() before returning SECFailure.
Please find an appropriate error code from
http://www.mozilla.org/projects/security/pki/nss/ref/ssl/sslerr.html

I think you can use SEC_ERROR_INVALID_ALGORITHM

[mattm, 2011/11/15 05:42:31]

Done.

+  }
+
+  // Hash the input.
+  std::vector<uint8> hash_data(HASH_ResultLen(hash_type));
+  SECStatus rv = HASH_HashBuf(
+      hash_type, hash_data.data(), input->data, input->len);
+  if (rv != SECSuccess)
+    return rv;
+  SECItem hash = {siBuffer, hash_data.data(), hash_data.size()};
+
+  // Compute signature of hash.
+  int signature_len = PK11_SignatureLen(key);
+  std::vector<uint8> signature_data(signature_len);
+  SECItem sig = {siBuffer, signature_data.data(), signature_len};
+  rv = PK11_Sign(key, &sig, &hash);

[wtc, 2011/11/15 03:10:57]

I suggest we use this code for all signature algorithms
(not just ECDSA) and on all platforms (including Windows).
Can you do this?

[mattm, 2011/11/15 05:42:31]

Hm, I could, but I think handling them all would make things a bit messier.   
The switch for the algo_id would get bigger, and there are differences in how
the signature is encoded between RSA and DSA keys.  Well, it wouldn't be too
horrible but I'm not sure it's  worthwhile.
Updated to use on all platforms.  Let me know if you still want me to do the
other part.

[wtc, 2011/11/15 06:15:01]

Not doing the other part (use PK11_Sign for all algorithms)
is fine.

This means we don't need to patch secsign.c in our copy of
NSS, right?

[mattm, 2011/11/16 01:41:13]

right.  Should I revert that?

+  if (rv != SECSuccess)
+    return rv;
+
+  CERTSignedData sd;
+  PORT_Memset(&sd, 0, sizeof(sd));
+  // Fill in tbsCertificate.
+  sd.data.data = (unsigned char*) input->data;
+  sd.data.len = input->len;
+
+  // Fill in signatureAlgorithm.
+  rv = SECOID_SetAlgorithmID(arena, &sd.signatureAlgorithm, algo_id, 0);
+  if (rv != SECSuccess)
+    return rv;
+
+  // Fill in signatureValue.
+  rv = DSAU_EncodeDerSigWithLen(&sd.signature, &sig, sig.len);
+  if (rv != SECSuccess)
+    return rv;
+  sd.signature.len <<=  3;  // Convert to bit string.
+
+  // DER encode the signed data object.
+  void* encode_result = SEC_ASN1EncodeItem(
+      arena, result, &sd, SEC_ASN1_GET(CERT_SignedDataTemplate));
+
+  PORT_Free(sd.signature.data);
+
+  return encode_result ? SECSuccess : SECFailure;
+#endif
+}