Index: src/mips/deoptimizer-mips.cc |
diff --git a/src/mips/deoptimizer-mips.cc b/src/mips/deoptimizer-mips.cc |
index 92d7edd836189641bdd1b0012319be0ce7e6651f..bc735df6b7147142c6f45d85b1a14892b723b6c0 100644 |
--- a/src/mips/deoptimizer-mips.cc |
+++ b/src/mips/deoptimizer-mips.cc |
@@ -32,24 +32,112 @@ |
#include "full-codegen.h" |
#include "safepoint-table.h" |
-// Note: this file was taken from the X64 version. ARM has a partially working |
-// lithium implementation, but for now it is not ported to mips. |
- |
namespace v8 { |
namespace internal { |
-const int Deoptimizer::table_entry_size_ = 10; |
+const int Deoptimizer::table_entry_size_ = 32; |
int Deoptimizer::patch_size() { |
- const int kCallInstructionSizeInWords = 3; |
+ const int kCallInstructionSizeInWords = 4; |
return kCallInstructionSizeInWords * Assembler::kInstrSize; |
} |
+void Deoptimizer::EnsureRelocSpaceForLazyDeoptimization(Handle<Code> code) { |
+ // Nothing to do. No new relocation information is written for lazy |
+ // deoptimization on MIPS. |
+} |
+ |
+ |
void Deoptimizer::DeoptimizeFunction(JSFunction* function) { |
- UNIMPLEMENTED(); |
+ HandleScope scope; |
+ AssertNoAllocation no_allocation; |
+ |
+ if (!function->IsOptimized()) return; |
+ |
+ // Get the optimized code. |
+ Code* code = function->code(); |
+ |
+ // Invalidate the relocation information, as it will become invalid by the |
+ // code patching below, and is not needed any more. |
+ code->InvalidateRelocation(); |
+ |
+ // For each return after a safepoint insert an absolute call to the |
+ // corresponding deoptimization entry. |
+ unsigned last_pc_offset = 0; |
+ SafepointTable table(function->code()); |
+ for (unsigned i = 0; i < table.length(); i++) { |
+ unsigned pc_offset = table.GetPcOffset(i); |
+ SafepointEntry safepoint_entry = table.GetEntry(i); |
+ int deoptimization_index = safepoint_entry.deoptimization_index(); |
+ int gap_code_size = safepoint_entry.gap_code_size(); |
+ // Check that we did not shoot past next safepoint. |
+ CHECK(pc_offset >= last_pc_offset); |
+#ifdef DEBUG |
+ // Destroy the code which is not supposed to be run again. |
+ int instructions = (pc_offset - last_pc_offset) / Assembler::kInstrSize; |
+ CodePatcher destroyer(code->instruction_start() + last_pc_offset, |
+ instructions); |
+ for (int x = 0; x < instructions; x++) { |
+ destroyer.masm()->break_(0); |
+ } |
+#endif |
+ last_pc_offset = pc_offset; |
+ if (deoptimization_index != Safepoint::kNoDeoptimizationIndex) { |
+ Address deoptimization_entry = Deoptimizer::GetDeoptimizationEntry( |
+ deoptimization_index, Deoptimizer::LAZY); |
+ last_pc_offset += gap_code_size; |
+ int call_size_in_bytes = MacroAssembler::CallSize(deoptimization_entry, |
+ RelocInfo::NONE); |
+ int call_size_in_words = call_size_in_bytes / Assembler::kInstrSize; |
+ ASSERT(call_size_in_bytes % Assembler::kInstrSize == 0); |
+ ASSERT(call_size_in_bytes <= patch_size()); |
+ CodePatcher patcher(code->instruction_start() + last_pc_offset, |
+ call_size_in_words); |
+ patcher.masm()->Call(deoptimization_entry, RelocInfo::NONE); |
+ last_pc_offset += call_size_in_bytes; |
+ } |
+ } |
+ |
+#ifdef DEBUG |
+ // Destroy the code which is not supposed to be run again. |
+ int instructions = |
+ (code->safepoint_table_offset() - last_pc_offset) / Assembler::kInstrSize; |
+ CodePatcher destroyer(code->instruction_start() + last_pc_offset, |
+ instructions); |
+ for (int x = 0; x < instructions; x++) { |
+ destroyer.masm()->break_(0); |
+ } |
+#endif |
+ |
+ Isolate* isolate = code->GetIsolate(); |
+ |
+ // Add the deoptimizing code to the list. |
+ DeoptimizingCodeListNode* node = new DeoptimizingCodeListNode(code); |
+ DeoptimizerData* data = isolate->deoptimizer_data(); |
+ node->set_next(data->deoptimizing_code_list_); |
+ data->deoptimizing_code_list_ = node; |
+ |
+ // We might be in the middle of incremental marking with compaction. |
+ // Tell collector to treat this code object in a special way and |
+ // ignore all slots that might have been recorded on it. |
+ isolate->heap()->mark_compact_collector()->InvalidateCode(code); |
+ |
+ // Set the code for the function to non-optimized version. |
+ function->ReplaceCode(function->shared()->code()); |
+ |
+ if (FLAG_trace_deopt) { |
+ PrintF("[forced deoptimization: "); |
+ function->PrintName(); |
+ PrintF(" / %x]\n", reinterpret_cast<uint32_t>(function)); |
+#ifdef DEBUG |
+ if (FLAG_print_code) { |
+ code->PrintLn(); |
+ } |
+#endif |
+ } |
} |
@@ -57,7 +145,42 @@ void Deoptimizer::PatchStackCheckCodeAt(Code* unoptimized_code, |
Address pc_after, |
Code* check_code, |
Code* replacement_code) { |
- UNIMPLEMENTED(); |
+ const int kInstrSize = Assembler::kInstrSize; |
+ // This structure comes from FullCodeGenerator::EmitStackCheck. |
+ // The call of the stack guard check has the following form: |
+ // sltu at, sp, t0 |
+ // beq at, zero_reg, ok |
+ // lui t9, <stack guard address> upper |
+ // ori t9, <stack guard address> lower |
+ // jalr t9 |
+ // nop |
+ // ----- pc_after points here |
+ |
+ ASSERT(Assembler::IsBeq(Assembler::instr_at(pc_after - 5 * kInstrSize))); |
+ |
+ // Replace the sltu instruction with load-imm 1 to at, so beq is not taken. |
+ CodePatcher patcher(pc_after - 6 * kInstrSize, 1); |
+ patcher.masm()->addiu(at, zero_reg, 1); |
+ |
+ // Replace the stack check address in the load-immediate (lui/ori pair) |
+ // with the entry address of the replacement code. |
+ ASSERT(reinterpret_cast<uint32_t>( |
+ Assembler::target_address_at(pc_after - 4 * kInstrSize)) == |
+ reinterpret_cast<uint32_t>(check_code->entry())); |
+ Assembler::set_target_address_at(pc_after - 4 * kInstrSize, |
+ replacement_code->entry()); |
+ |
+ // We patched the code to the following form: |
+ // addiu at, zero_reg, 1 |
+ // beq at, zero_reg, ok ;; Not changed |
+ // lui t9, <on-stack replacement address> upper |
+ // ori t9, <on-stack replacement address> lower |
+ // jalr t9 ;; Not changed |
+ // nop ;; Not changed |
+ // ----- pc_after points here |
+ |
+ unoptimized_code->GetHeap()->incremental_marking()->RecordCodeTargetPatch( |
+ unoptimized_code, pc_after - 4 * kInstrSize, replacement_code); |
} |
@@ -65,34 +188,618 @@ void Deoptimizer::RevertStackCheckCodeAt(Code* unoptimized_code, |
Address pc_after, |
Code* check_code, |
Code* replacement_code) { |
- UNIMPLEMENTED(); |
+ // Exact opposite of the function above. |
+ const int kInstrSize = Assembler::kInstrSize; |
+ ASSERT(Assembler::IsAddImmediate( |
+ Assembler::instr_at(pc_after - 6 * kInstrSize))); |
+ ASSERT(Assembler::IsBeq(Assembler::instr_at(pc_after - 5 * kInstrSize))); |
+ |
+ // Restore the sltu instruction so beq can be taken again. |
+ CodePatcher patcher(pc_after - 6 * kInstrSize, 1); |
+ patcher.masm()->sltu(at, sp, t0); |
+ |
+ // Replace the on-stack replacement address in the load-immediate (lui/ori |
+ // pair) with the entry address of the normal stack-check code. |
+ ASSERT(reinterpret_cast<uint32_t>( |
+ Assembler::target_address_at(pc_after - 4 * kInstrSize)) == |
+ reinterpret_cast<uint32_t>(replacement_code->entry())); |
+ Assembler::set_target_address_at(pc_after - 4 * kInstrSize, |
+ check_code->entry()); |
+ |
+ check_code->GetHeap()->incremental_marking()->RecordCodeTargetPatch( |
+ unoptimized_code, pc_after - 4 * kInstrSize, check_code); |
+} |
+ |
+ |
+static int LookupBailoutId(DeoptimizationInputData* data, unsigned ast_id) { |
+ ByteArray* translations = data->TranslationByteArray(); |
+ int length = data->DeoptCount(); |
+ for (int i = 0; i < length; i++) { |
+ if (static_cast<unsigned>(data->AstId(i)->value()) == ast_id) { |
+ TranslationIterator it(translations, data->TranslationIndex(i)->value()); |
+ int value = it.Next(); |
+ ASSERT(Translation::BEGIN == static_cast<Translation::Opcode>(value)); |
+ // Read the number of frames. |
+ value = it.Next(); |
+ if (value == 1) return i; |
+ } |
+ } |
+ UNREACHABLE(); |
+ return -1; |
} |
void Deoptimizer::DoComputeOsrOutputFrame() { |
- UNIMPLEMENTED(); |
+ DeoptimizationInputData* data = DeoptimizationInputData::cast( |
+ optimized_code_->deoptimization_data()); |
+ unsigned ast_id = data->OsrAstId()->value(); |
+ |
+ int bailout_id = LookupBailoutId(data, ast_id); |
+ unsigned translation_index = data->TranslationIndex(bailout_id)->value(); |
+ ByteArray* translations = data->TranslationByteArray(); |
+ |
+ TranslationIterator iterator(translations, translation_index); |
+ Translation::Opcode opcode = |
+ static_cast<Translation::Opcode>(iterator.Next()); |
+ ASSERT(Translation::BEGIN == opcode); |
+ USE(opcode); |
+ int count = iterator.Next(); |
+ ASSERT(count == 1); |
+ USE(count); |
+ |
+ opcode = static_cast<Translation::Opcode>(iterator.Next()); |
+ USE(opcode); |
+ ASSERT(Translation::FRAME == opcode); |
+ unsigned node_id = iterator.Next(); |
+ USE(node_id); |
+ ASSERT(node_id == ast_id); |
+ JSFunction* function = JSFunction::cast(ComputeLiteral(iterator.Next())); |
+ USE(function); |
+ ASSERT(function == function_); |
+ unsigned height = iterator.Next(); |
+ unsigned height_in_bytes = height * kPointerSize; |
+ USE(height_in_bytes); |
+ |
+ unsigned fixed_size = ComputeFixedSize(function_); |
+ unsigned input_frame_size = input_->GetFrameSize(); |
+ ASSERT(fixed_size + height_in_bytes == input_frame_size); |
+ |
+ unsigned stack_slot_size = optimized_code_->stack_slots() * kPointerSize; |
+ unsigned outgoing_height = data->ArgumentsStackHeight(bailout_id)->value(); |
+ unsigned outgoing_size = outgoing_height * kPointerSize; |
+ unsigned output_frame_size = fixed_size + stack_slot_size + outgoing_size; |
+ ASSERT(outgoing_size == 0); // OSR does not happen in the middle of a call. |
+ |
+ if (FLAG_trace_osr) { |
+ PrintF("[on-stack replacement: begin 0x%08" V8PRIxPTR " ", |
+ reinterpret_cast<intptr_t>(function_)); |
+ function_->PrintName(); |
+ PrintF(" => node=%u, frame=%d->%d]\n", |
+ ast_id, |
+ input_frame_size, |
+ output_frame_size); |
+ } |
+ |
+ // There's only one output frame in the OSR case. |
+ output_count_ = 1; |
+ output_ = new FrameDescription*[1]; |
+ output_[0] = new(output_frame_size) FrameDescription( |
+ output_frame_size, function_); |
+#ifdef DEBUG |
+ output_[0]->SetKind(Code::OPTIMIZED_FUNCTION); |
+#endif |
+ |
+ // Clear the incoming parameters in the optimized frame to avoid |
+ // confusing the garbage collector. |
+ unsigned output_offset = output_frame_size - kPointerSize; |
+ int parameter_count = function_->shared()->formal_parameter_count() + 1; |
+ for (int i = 0; i < parameter_count; ++i) { |
+ output_[0]->SetFrameSlot(output_offset, 0); |
+ output_offset -= kPointerSize; |
+ } |
+ |
+ // Translate the incoming parameters. This may overwrite some of the |
+ // incoming argument slots we've just cleared. |
+ int input_offset = input_frame_size - kPointerSize; |
+ bool ok = true; |
+ int limit = input_offset - (parameter_count * kPointerSize); |
+ while (ok && input_offset > limit) { |
+ ok = DoOsrTranslateCommand(&iterator, &input_offset); |
+ } |
+ |
+ // There are no translation commands for the caller's pc and fp, the |
+ // context, and the function. Set them up explicitly. |
+ for (int i = StandardFrameConstants::kCallerPCOffset; |
+ ok && i >= StandardFrameConstants::kMarkerOffset; |
+ i -= kPointerSize) { |
+ uint32_t input_value = input_->GetFrameSlot(input_offset); |
+ if (FLAG_trace_osr) { |
+ const char* name = "UNKNOWN"; |
+ switch (i) { |
+ case StandardFrameConstants::kCallerPCOffset: |
+ name = "caller's pc"; |
+ break; |
+ case StandardFrameConstants::kCallerFPOffset: |
+ name = "fp"; |
+ break; |
+ case StandardFrameConstants::kContextOffset: |
+ name = "context"; |
+ break; |
+ case StandardFrameConstants::kMarkerOffset: |
+ name = "function"; |
+ break; |
+ } |
+ PrintF(" [sp + %d] <- 0x%08x ; [sp + %d] (fixed part - %s)\n", |
+ output_offset, |
+ input_value, |
+ input_offset, |
+ name); |
+ } |
+ |
+ output_[0]->SetFrameSlot(output_offset, input_->GetFrameSlot(input_offset)); |
+ input_offset -= kPointerSize; |
+ output_offset -= kPointerSize; |
+ } |
+ |
+ // Translate the rest of the frame. |
+ while (ok && input_offset >= 0) { |
+ ok = DoOsrTranslateCommand(&iterator, &input_offset); |
+ } |
+ |
+ // If translation of any command failed, continue using the input frame. |
+ if (!ok) { |
+ delete output_[0]; |
+ output_[0] = input_; |
+ output_[0]->SetPc(reinterpret_cast<uint32_t>(from_)); |
+ } else { |
+ // Setup the frame pointer and the context pointer. |
+ output_[0]->SetRegister(fp.code(), input_->GetRegister(fp.code())); |
+ output_[0]->SetRegister(cp.code(), input_->GetRegister(cp.code())); |
+ |
+ unsigned pc_offset = data->OsrPcOffset()->value(); |
+ uint32_t pc = reinterpret_cast<uint32_t>( |
+ optimized_code_->entry() + pc_offset); |
+ output_[0]->SetPc(pc); |
+ } |
+ Code* continuation = isolate_->builtins()->builtin(Builtins::kNotifyOSR); |
+ output_[0]->SetContinuation( |
+ reinterpret_cast<uint32_t>(continuation->entry())); |
+ |
+ if (FLAG_trace_osr) { |
+ PrintF("[on-stack replacement translation %s: 0x%08" V8PRIxPTR " ", |
+ ok ? "finished" : "aborted", |
+ reinterpret_cast<intptr_t>(function)); |
+ function->PrintName(); |
+ PrintF(" => pc=0x%0x]\n", output_[0]->GetPc()); |
+ } |
} |
+// This code is very similar to ia32/arm code, but relies on register names |
+// (fp, sp) and how the frame is laid out. |
void Deoptimizer::DoComputeFrame(TranslationIterator* iterator, |
int frame_index) { |
- UNIMPLEMENTED(); |
-} |
+ // Read the ast node id, function, and frame height for this output frame. |
+ Translation::Opcode opcode = |
+ static_cast<Translation::Opcode>(iterator->Next()); |
+ USE(opcode); |
+ ASSERT(Translation::FRAME == opcode); |
+ int node_id = iterator->Next(); |
+ JSFunction* function = JSFunction::cast(ComputeLiteral(iterator->Next())); |
+ unsigned height = iterator->Next(); |
+ unsigned height_in_bytes = height * kPointerSize; |
+ if (FLAG_trace_deopt) { |
+ PrintF(" translating "); |
+ function->PrintName(); |
+ PrintF(" => node=%d, height=%d\n", node_id, height_in_bytes); |
+ } |
+ |
+ // The 'fixed' part of the frame consists of the incoming parameters and |
+ // the part described by JavaScriptFrameConstants. |
+ unsigned fixed_frame_size = ComputeFixedSize(function); |
+ unsigned input_frame_size = input_->GetFrameSize(); |
+ unsigned output_frame_size = height_in_bytes + fixed_frame_size; |
+ |
+ // Allocate and store the output frame description. |
+ FrameDescription* output_frame = |
+ new(output_frame_size) FrameDescription(output_frame_size, function); |
+#ifdef DEBUG |
+ output_frame->SetKind(Code::FUNCTION); |
+#endif |
+ |
+ bool is_bottommost = (0 == frame_index); |
+ bool is_topmost = (output_count_ - 1 == frame_index); |
+ ASSERT(frame_index >= 0 && frame_index < output_count_); |
+ ASSERT(output_[frame_index] == NULL); |
+ output_[frame_index] = output_frame; |
+ |
+ // The top address for the bottommost output frame can be computed from |
+ // the input frame pointer and the output frame's height. For all |
+ // subsequent output frames, it can be computed from the previous one's |
+ // top address and the current frame's size. |
+ uint32_t top_address; |
+ if (is_bottommost) { |
+ // 2 = context and function in the frame. |
+ top_address = |
+ input_->GetRegister(fp.code()) - (2 * kPointerSize) - height_in_bytes; |
+ } else { |
+ top_address = output_[frame_index - 1]->GetTop() - output_frame_size; |
+ } |
+ output_frame->SetTop(top_address); |
+ |
+ // Compute the incoming parameter translation. |
+ int parameter_count = function->shared()->formal_parameter_count() + 1; |
+ unsigned output_offset = output_frame_size; |
+ unsigned input_offset = input_frame_size; |
+ for (int i = 0; i < parameter_count; ++i) { |
+ output_offset -= kPointerSize; |
+ DoTranslateCommand(iterator, frame_index, output_offset); |
+ } |
+ input_offset -= (parameter_count * kPointerSize); |
+ // There are no translation commands for the caller's pc and fp, the |
+ // context, and the function. Synthesize their values and set them up |
+ // explicitly. |
+ // |
+ // The caller's pc for the bottommost output frame is the same as in the |
+ // input frame. For all subsequent output frames, it can be read from the |
+ // previous one. This frame's pc can be computed from the non-optimized |
+ // function code and AST id of the bailout. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ intptr_t value; |
+ if (is_bottommost) { |
+ value = input_->GetFrameSlot(input_offset); |
+ } else { |
+ value = output_[frame_index - 1]->GetPc(); |
+ } |
+ output_frame->SetFrameSlot(output_offset, value); |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08x: [top + %d] <- 0x%08x ; caller's pc\n", |
+ top_address + output_offset, output_offset, value); |
+ } |
+ |
+ // The caller's frame pointer for the bottommost output frame is the same |
+ // as in the input frame. For all subsequent output frames, it can be |
+ // read from the previous one. Also compute and set this frame's frame |
+ // pointer. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ if (is_bottommost) { |
+ value = input_->GetFrameSlot(input_offset); |
+ } else { |
+ value = output_[frame_index - 1]->GetFp(); |
+ } |
+ output_frame->SetFrameSlot(output_offset, value); |
+ intptr_t fp_value = top_address + output_offset; |
+ ASSERT(!is_bottommost || input_->GetRegister(fp.code()) == fp_value); |
+ output_frame->SetFp(fp_value); |
+ if (is_topmost) { |
+ output_frame->SetRegister(fp.code(), fp_value); |
+ } |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08x: [top + %d] <- 0x%08x ; caller's fp\n", |
+ fp_value, output_offset, value); |
+ } |
+ |
+ // For the bottommost output frame the context can be gotten from the input |
+ // frame. For all subsequent output frames it can be gotten from the function |
+ // so long as we don't inline functions that need local contexts. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ if (is_bottommost) { |
+ value = input_->GetFrameSlot(input_offset); |
+ } else { |
+ value = reinterpret_cast<intptr_t>(function->context()); |
+ } |
+ output_frame->SetFrameSlot(output_offset, value); |
+ if (is_topmost) { |
+ output_frame->SetRegister(cp.code(), value); |
+ } |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08x: [top + %d] <- 0x%08x ; context\n", |
+ top_address + output_offset, output_offset, value); |
+ } |
+ |
+ // The function was mentioned explicitly in the BEGIN_FRAME. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ value = reinterpret_cast<uint32_t>(function); |
+ // The function for the bottommost output frame should also agree with the |
+ // input frame. |
+ ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value); |
+ output_frame->SetFrameSlot(output_offset, value); |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08x: [top + %d] <- 0x%08x ; function\n", |
+ top_address + output_offset, output_offset, value); |
+ } |
+ |
+ // Translate the rest of the frame. |
+ for (unsigned i = 0; i < height; ++i) { |
+ output_offset -= kPointerSize; |
+ DoTranslateCommand(iterator, frame_index, output_offset); |
+ } |
+ ASSERT(0 == output_offset); |
+ |
+ // Compute this frame's PC, state, and continuation. |
+ Code* non_optimized_code = function->shared()->code(); |
+ FixedArray* raw_data = non_optimized_code->deoptimization_data(); |
+ DeoptimizationOutputData* data = DeoptimizationOutputData::cast(raw_data); |
+ Address start = non_optimized_code->instruction_start(); |
+ unsigned pc_and_state = GetOutputInfo(data, node_id, function->shared()); |
+ unsigned pc_offset = FullCodeGenerator::PcField::decode(pc_and_state); |
+ uint32_t pc_value = reinterpret_cast<uint32_t>(start + pc_offset); |
+ output_frame->SetPc(pc_value); |
+ |
+ FullCodeGenerator::State state = |
+ FullCodeGenerator::StateField::decode(pc_and_state); |
+ output_frame->SetState(Smi::FromInt(state)); |
+ |
+ |
+ // Set the continuation for the topmost frame. |
+ if (is_topmost && bailout_type_ != DEBUGGER) { |
+ Builtins* builtins = isolate_->builtins(); |
+ Code* continuation = (bailout_type_ == EAGER) |
+ ? builtins->builtin(Builtins::kNotifyDeoptimized) |
+ : builtins->builtin(Builtins::kNotifyLazyDeoptimized); |
+ output_frame->SetContinuation( |
+ reinterpret_cast<uint32_t>(continuation->entry())); |
+ } |
+} |
void Deoptimizer::FillInputFrame(Address tos, JavaScriptFrame* frame) { |
- UNIMPLEMENTED(); |
+ // Set the register values. The values are not important as there are no |
+ // callee saved registers in JavaScript frames, so all registers are |
+ // spilled. Registers fp and sp are set to the correct values though. |
+ |
+ for (int i = 0; i < Register::kNumRegisters; i++) { |
+ input_->SetRegister(i, i * 4); |
+ } |
+ input_->SetRegister(sp.code(), reinterpret_cast<intptr_t>(frame->sp())); |
+ input_->SetRegister(fp.code(), reinterpret_cast<intptr_t>(frame->fp())); |
+ for (int i = 0; i < DoubleRegister::kNumAllocatableRegisters; i++) { |
+ input_->SetDoubleRegister(i, 0.0); |
+ } |
+ |
+ // Fill the frame content from the actual data on the frame. |
+ for (unsigned i = 0; i < input_->GetFrameSize(); i += kPointerSize) { |
+ input_->SetFrameSlot(i, Memory::uint32_at(tos + i)); |
+ } |
} |
+#define __ masm()-> |
+ |
+ |
+// This code tries to be close to ia32 code so that any changes can be |
+// easily ported. |
void Deoptimizer::EntryGenerator::Generate() { |
- UNIMPLEMENTED(); |
+ GeneratePrologue(); |
+ |
+ Isolate* isolate = masm()->isolate(); |
+ |
+ CpuFeatures::Scope scope(FPU); |
+ // Unlike on ARM we don't save all the registers, just the useful ones. |
+ // For the rest, there are gaps on the stack, so the offsets remain the same. |
+ const int kNumberOfRegisters = Register::kNumRegisters; |
+ |
+ RegList restored_regs = kJSCallerSaved | kCalleeSaved; |
+ RegList saved_regs = restored_regs | sp.bit() | ra.bit(); |
+ |
+ const int kDoubleRegsSize = |
+ kDoubleSize * FPURegister::kNumAllocatableRegisters; |
+ |
+ // Save all FPU registers before messing with them. |
+ __ Subu(sp, sp, Operand(kDoubleRegsSize)); |
+ for (int i = 0; i < FPURegister::kNumAllocatableRegisters; ++i) { |
+ FPURegister fpu_reg = FPURegister::FromAllocationIndex(i); |
+ int offset = i * kDoubleSize; |
+ __ sdc1(fpu_reg, MemOperand(sp, offset)); |
+ } |
+ |
+ // Push saved_regs (needed to populate FrameDescription::registers_). |
+ // Leave gaps for other registers. |
+ __ Subu(sp, sp, kNumberOfRegisters * kPointerSize); |
+ for (int16_t i = kNumberOfRegisters - 1; i >= 0; i--) { |
+ if ((saved_regs & (1 << i)) != 0) { |
+ __ sw(ToRegister(i), MemOperand(sp, kPointerSize * i)); |
+ } |
+ } |
+ |
+ const int kSavedRegistersAreaSize = |
+ (kNumberOfRegisters * kPointerSize) + kDoubleRegsSize; |
+ |
+ // Get the bailout id from the stack. |
+ __ lw(a2, MemOperand(sp, kSavedRegistersAreaSize)); |
+ |
+ // Get the address of the location in the code object if possible (a3) (return |
+ // address for lazy deoptimization) and compute the fp-to-sp delta in |
+ // register t0. |
+ if (type() == EAGER) { |
+ __ mov(a3, zero_reg); |
+ // Correct one word for bailout id. |
+ __ Addu(t0, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
+ } else if (type() == OSR) { |
+ __ mov(a3, ra); |
+ // Correct one word for bailout id. |
+ __ Addu(t0, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
+ } else { |
+ __ mov(a3, ra); |
+ // Correct two words for bailout id and return address. |
+ __ Addu(t0, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize))); |
+ } |
+ |
+ __ Subu(t0, fp, t0); |
+ |
+ // Allocate a new deoptimizer object. |
+ // Pass four arguments in a0 to a3 and fifth & sixth arguments on stack. |
+ __ PrepareCallCFunction(6, t1); |
+ __ lw(a0, MemOperand(fp, JavaScriptFrameConstants::kFunctionOffset)); |
+ __ li(a1, Operand(type())); // bailout type, |
+ // a2: bailout id already loaded. |
+ // a3: code address or 0 already loaded. |
+ __ sw(t0, CFunctionArgumentOperand(5)); // Fp-to-sp delta. |
+ __ li(t1, Operand(ExternalReference::isolate_address())); |
+ __ sw(t1, CFunctionArgumentOperand(6)); // Isolate. |
+ // Call Deoptimizer::New(). |
+ { |
+ AllowExternalCallThatCantCauseGC scope(masm()); |
+ __ CallCFunction(ExternalReference::new_deoptimizer_function(isolate), 6); |
+ } |
+ |
+ // Preserve "deoptimizer" object in register v0 and get the input |
+ // frame descriptor pointer to a1 (deoptimizer->input_); |
+ // Move deopt-obj to a0 for call to Deoptimizer::ComputeOutputFrames() below. |
+ __ mov(a0, v0); |
+ __ lw(a1, MemOperand(v0, Deoptimizer::input_offset())); |
+ |
+ // Copy core registers into FrameDescription::registers_[kNumRegisters]. |
+ ASSERT(Register::kNumRegisters == kNumberOfRegisters); |
+ for (int i = 0; i < kNumberOfRegisters; i++) { |
+ int offset = (i * kPointerSize) + FrameDescription::registers_offset(); |
+ if ((saved_regs & (1 << i)) != 0) { |
+ __ lw(a2, MemOperand(sp, i * kPointerSize)); |
+ __ sw(a2, MemOperand(a1, offset)); |
+ } else if (FLAG_debug_code) { |
+ __ li(a2, kDebugZapValue); |
+ __ sw(a2, MemOperand(a1, offset)); |
+ } |
+ } |
+ |
+ // Copy FPU registers to |
+ // double_registers_[DoubleRegister::kNumAllocatableRegisters] |
+ int double_regs_offset = FrameDescription::double_registers_offset(); |
+ for (int i = 0; i < FPURegister::kNumAllocatableRegisters; ++i) { |
+ int dst_offset = i * kDoubleSize + double_regs_offset; |
+ int src_offset = i * kDoubleSize + kNumberOfRegisters * kPointerSize; |
+ __ ldc1(f0, MemOperand(sp, src_offset)); |
+ __ sdc1(f0, MemOperand(a1, dst_offset)); |
+ } |
+ |
+ // Remove the bailout id, eventually return address, and the saved registers |
+ // from the stack. |
+ if (type() == EAGER || type() == OSR) { |
+ __ Addu(sp, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
+ } else { |
+ __ Addu(sp, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize))); |
+ } |
+ |
+ // Compute a pointer to the unwinding limit in register a2; that is |
+ // the first stack slot not part of the input frame. |
+ __ lw(a2, MemOperand(a1, FrameDescription::frame_size_offset())); |
+ __ Addu(a2, a2, sp); |
+ |
+ // Unwind the stack down to - but not including - the unwinding |
+ // limit and copy the contents of the activation frame to the input |
+ // frame description. |
+ __ Addu(a3, a1, Operand(FrameDescription::frame_content_offset())); |
+ Label pop_loop; |
+ __ bind(&pop_loop); |
+ __ pop(t0); |
+ __ sw(t0, MemOperand(a3, 0)); |
+ __ Branch(USE_DELAY_SLOT, &pop_loop, ne, a2, Operand(sp)); |
+ __ addiu(a3, a3, sizeof(uint32_t)); // In delay slot. |
+ |
+ // Compute the output frame in the deoptimizer. |
+ __ push(a0); // Preserve deoptimizer object across call. |
+ // a0: deoptimizer object; a1: scratch. |
+ __ PrepareCallCFunction(1, a1); |
+ // Call Deoptimizer::ComputeOutputFrames(). |
+ { |
+ AllowExternalCallThatCantCauseGC scope(masm()); |
+ __ CallCFunction( |
+ ExternalReference::compute_output_frames_function(isolate), 1); |
+ } |
+ __ pop(a0); // Restore deoptimizer object (class Deoptimizer). |
+ |
+ // Replace the current (input) frame with the output frames. |
+ Label outer_push_loop, inner_push_loop; |
+ // Outer loop state: a0 = current "FrameDescription** output_", |
+ // a1 = one past the last FrameDescription**. |
+ __ lw(a1, MemOperand(a0, Deoptimizer::output_count_offset())); |
+ __ lw(a0, MemOperand(a0, Deoptimizer::output_offset())); // a0 is output_. |
+ __ sll(a1, a1, kPointerSizeLog2); // Count to offset. |
+ __ addu(a1, a0, a1); // a1 = one past the last FrameDescription**. |
+ __ bind(&outer_push_loop); |
+ // Inner loop state: a2 = current FrameDescription*, a3 = loop index. |
+ __ lw(a2, MemOperand(a0, 0)); // output_[ix] |
+ __ lw(a3, MemOperand(a2, FrameDescription::frame_size_offset())); |
+ __ bind(&inner_push_loop); |
+ __ Subu(a3, a3, Operand(sizeof(uint32_t))); |
+ __ Addu(t2, a2, Operand(a3)); |
+ __ lw(t3, MemOperand(t2, FrameDescription::frame_content_offset())); |
+ __ push(t3); |
+ __ Branch(&inner_push_loop, ne, a3, Operand(zero_reg)); |
+ |
+ __ Addu(a0, a0, Operand(kPointerSize)); |
+ __ Branch(&outer_push_loop, lt, a0, Operand(a1)); |
+ |
+ |
+ // Push state, pc, and continuation from the last output frame. |
+ if (type() != OSR) { |
+ __ lw(t2, MemOperand(a2, FrameDescription::state_offset())); |
+ __ push(t2); |
+ } |
+ |
+ __ lw(t2, MemOperand(a2, FrameDescription::pc_offset())); |
+ __ push(t2); |
+ __ lw(t2, MemOperand(a2, FrameDescription::continuation_offset())); |
+ __ push(t2); |
+ |
+ |
+ // Technically restoring 'at' should work unless zero_reg is also restored |
+ // but it's safer to check for this. |
+ ASSERT(!(at.bit() & restored_regs)); |
+ // Restore the registers from the last output frame. |
+ __ mov(at, a2); |
+ for (int i = kNumberOfRegisters - 1; i >= 0; i--) { |
+ int offset = (i * kPointerSize) + FrameDescription::registers_offset(); |
+ if ((restored_regs & (1 << i)) != 0) { |
+ __ lw(ToRegister(i), MemOperand(at, offset)); |
+ } |
+ } |
+ |
+ // Set up the roots register. |
+ ExternalReference roots_array_start = |
+ ExternalReference::roots_array_start(isolate); |
+ __ li(roots, Operand(roots_array_start)); |
+ |
+ __ pop(at); // Get continuation, leave pc on stack. |
+ __ pop(ra); |
+ __ Jump(at); |
+ __ stop("Unreachable."); |
} |
void Deoptimizer::TableEntryGenerator::GeneratePrologue() { |
- UNIMPLEMENTED(); |
+ Assembler::BlockTrampolinePoolScope block_trampoline_pool(masm()); |
+ |
+ // Create a sequence of deoptimization entries. Note that any |
+ // registers may be still live. |
+ |
+ Label done; |
+ for (int i = 0; i < count(); i++) { |
+ int start = masm()->pc_offset(); |
+ USE(start); |
+ if (type() != EAGER) { |
+ // Emulate ia32 like call by pushing return address to stack. |
+ __ push(ra); |
+ } |
+ __ li(at, Operand(i)); |
+ __ push(at); |
+ __ Branch(&done); |
+ |
+ // Pad the rest of the code. |
+ while (table_entry_size_ > (masm()->pc_offset() - start)) { |
+ __ nop(); |
+ } |
+ |
+ ASSERT_EQ(table_entry_size_, masm()->pc_offset() - start); |
+ } |
+ __ bind(&done); |
} |
+#undef __ |
+ |
} } // namespace v8::internal |