Import SQLite 3.7.6.3.

third_party/sqlite/src/test/e_expr.test

+# 2010 July 16
+#
+# The author disclaims copyright to this source code.  In place of
+# a legal notice, here is a blessing:
+#
+#    May you do good and not evil.
+#    May you find forgiveness for yourself and forgive others.
+#    May you share freely, never taking more than you give.
+#
+#***********************************************************************
+#
+# This file implements tests to verify that the "testable statements" in 
+# the lang_expr.html document are correct.
+#
+
+set testdir [file dirname $argv0]
+source $testdir/tester.tcl
+source $testdir/malloc_common.tcl
+
+
+proc do_expr_test {tn expr type value} {
+  uplevel do_execsql_test $tn [list "SELECT typeof($expr), $expr"] [
+    list [list $type $value]
+  ]
+}
+
+proc do_qexpr_test {tn expr value} {
+  uplevel do_execsql_test $tn [list "SELECT quote($expr)"] [list $value]
+}
+
+# Set up three global variables:
+#
+#   ::opname         An array mapping from SQL operator to an easy to parse
+#                    name. The names are used as part of test case names.
+#
+#   ::opprec         An array mapping from SQL operator to a numeric
+#                    precedence value. Operators that group more tightly
+#                    have lower numeric precedences.
+#
+#   ::oplist         A list of all SQL operators supported by SQLite.
+#
+foreach {op opn} {
+      ||   cat     *   mul       /  div       %     mod       +      add
+      -    sub     <<  lshift    >> rshift    &     bitand    |      bitor
+      <    less    <=  lesseq    >  more      >=    moreeq    =      eq1
+      ==   eq2     <>  ne1       != ne2       IS    is        LIKE   like
+      GLOB glob    AND and       OR or        MATCH match     REGEXP regexp
+      {IS NOT} isnt
+} {
+  set ::opname($op) $opn
+}
+set oplist [list]
+foreach {prec opl} {
+  1   ||
+  2   {* / %}
+  3   {+ -}
+  4   {<< >> & |}
+  5   {< <= > >=}
+  6   {= == != <> IS {IS NOT} LIKE GLOB MATCH REGEXP}
+  7   AND
+  8   OR
+} {
+  foreach op $opl { 
+    set ::opprec($op) $prec 
+    lappend oplist $op
+  }
+}
+
+
+# Hook in definitions of MATCH and REGEX. The following implementations
+# cause MATCH and REGEX to behave similarly to the == operator.
+#
+proc matchfunc {a b} { return [expr {$a==$b}] }
+proc regexfunc {a b} { return [expr {$a==$b}] }
+db func match  -argcount 2 matchfunc
+db func regexp -argcount 2 regexfunc
+
+#-------------------------------------------------------------------------
+# Test cases e_expr-1.* attempt to verify that all binary operators listed
+# in the documentation exist and that the relative precedences of the
+# operators are also as the documentation suggests.
+#
+# EVIDENCE-OF: R-15514-65163 SQLite understands the following binary
+# operators, in order from highest to lowest precedence: || * / % + -
+# << >> & | < <= > >= = == != <> IS IS
+# NOT IN LIKE GLOB MATCH REGEXP AND OR
+#
+# EVIDENCE-OF: R-38759-38789 Operators IS and IS NOT have the same
+# precedence as =.
+#
+
+unset -nocomplain untested
+foreach op1 $oplist {
+  foreach op2 $oplist {
+    set untested($op1,$op2) 1
+    foreach {tn A B C} {
+       1     22   45    66
+       2      0    0     0
+       3      0    0     1
+       4      0    1     0
+       5      0    1     1
+       6      1    0     0
+       7      1    0     1
+       8      1    1     0
+       9      1    1     1
+      10      5    6     1
+      11      1    5     6
+      12      1    5     5
+      13      5    5     1
+
+      14      5    2     1
+      15      1    4     1
+      16     -1    0     1
+      17      0    1    -1
+
+    } {
+      set testname "e_expr-1.$opname($op1).$opname($op2).$tn"
+
+      # If $op2 groups more tightly than $op1, then the result
+      # of executing $sql1 whould be the same as executing $sql3.
+      # If $op1 groups more tightly, or if $op1 and $op2 have 
+      # the same precedence, then executing $sql1 should return
+      # the same value as $sql2.
+      #
+      set sql1 "SELECT $A $op1 $B $op2 $C"
+      set sql2 "SELECT ($A $op1 $B) $op2 $C"
+      set sql3 "SELECT $A $op1 ($B $op2 $C)"
+
+      set a2 [db one $sql2]
+      set a3 [db one $sql3]
+
+      do_execsql_test $testname $sql1 [list [
+        if {$opprec($op2) < $opprec($op1)} {set a3} {set a2}
+      ]]
+      if {$a2 != $a3} { unset -nocomplain untested($op1,$op2) }
+    }
+  }
+}
+
+foreach op {* AND OR + || & |} { unset untested($op,$op) }
+unset untested(+,-)  ;#       Since    (a+b)-c == a+(b-c)
+unset untested(*,<<) ;#       Since    (a*b)<<c == a*(b<<c)
+
+do_test e_expr-1.1 { array names untested } {}
+
+# At one point, test 1.2.2 was failing. Instead of the correct result, it
+# was returning {1 1 0}. This would seem to indicate that LIKE has the
+# same precedence as '<'. Which is incorrect. It has lower precedence.
+#
+do_execsql_test e_expr-1.2.1 { 
+  SELECT 0 < 2 LIKE 1,   (0 < 2) LIKE 1,   0 < (2 LIKE 1)
+} {1 1 0}
+do_execsql_test e_expr-1.2.2 { 
+  SELECT 0 LIKE 0 < 2,   (0 LIKE 0) < 2,   0 LIKE (0 < 2)
+} {0 1 0}
+
+# Showing that LIKE and == have the same precedence
+#
+do_execsql_test e_expr-1.2.3 { 
+  SELECT 2 LIKE 2 == 1,   (2 LIKE 2) == 1,    2 LIKE (2 == 1)
+} {1 1 0}
+do_execsql_test e_expr-1.2.4 { 
+  SELECT 2 == 2 LIKE 1,   (2 == 2) LIKE 1,    2 == (2 LIKE 1)
+} {1 1 0}
+
+# Showing that < groups more tightly than == (< has higher precedence). 
+#
+do_execsql_test e_expr-1.2.5 { 
+  SELECT 0 < 2 == 1,   (0 < 2) == 1,   0 < (2 == 1)
+} {1 1 0}
+do_execsql_test e_expr-1.6 { 
+  SELECT 0 == 0 < 2,   (0 == 0) < 2,   0 == (0 < 2)
+} {0 1 0}
+
+#-------------------------------------------------------------------------
+# Check that the four unary prefix operators mentioned in the 
+# documentation exist.
+#
+# EVIDENCE-OF: R-13958-53419 Supported unary prefix operators are these:
+# - + ~ NOT
+#
+do_execsql_test e_expr-2.1 { SELECT -   10   } {-10}
+do_execsql_test e_expr-2.2 { SELECT +   10   } {10}
+do_execsql_test e_expr-2.3 { SELECT ~   10   } {-11}
+do_execsql_test e_expr-2.4 { SELECT NOT 10   } {0}
+
+#-------------------------------------------------------------------------
+# Tests for the two statements made regarding the unary + operator.
+#
+# EVIDENCE-OF: R-53670-03373 The unary operator + is a no-op.
+#
+# EVIDENCE-OF: R-19480-30968 It can be applied to strings, numbers,
+# blobs or NULL and it always returns a result with the same value as
+# the operand.
+#
+foreach {tn literal type} {
+  1     'helloworld'   text
+  2     45             integer
+  3     45.2           real
+  4     45.0           real
+  5     X'ABCDEF'      blob
+  6     NULL           null
+} {
+  set sql " SELECT quote( + $literal ), typeof( + $literal) "
+  do_execsql_test e_expr-3.$tn $sql [list $literal $type]
+}
+
+#-------------------------------------------------------------------------
+# Check that both = and == are both acceptable as the "equals" operator.
+# Similarly, either != or <> work as the not-equals operator.
+#
+# EVIDENCE-OF: R-03679-60639 Equals can be either = or ==.
+#
+# EVIDENCE-OF: R-30082-38996 The non-equals operator can be either != or
+# <>.
+#
+foreach {tn literal different} {
+  1   'helloworld'  '12345'
+  2   22            23
+  3   'xyz'         X'78797A'
+  4   X'78797A00'   'xyz'
+} {
+  do_execsql_test e_expr-4.$tn "
+    SELECT $literal  = $literal,   $literal == $literal,
+           $literal  = $different, $literal == $different,
+           $literal  = NULL,       $literal == NULL,
+           $literal != $literal,   $literal <> $literal,
+           $literal != $different, $literal <> $different,
+           $literal != NULL,       $literal != NULL
+
+  " {1 1 0 0 {} {} 0 0 1 1 {} {}}
+}
+
+#-------------------------------------------------------------------------
+# Test the || operator.
+#
+# EVIDENCE-OF: R-44409-62641 The || operator is "concatenate" - it joins
+# together the two strings of its operands.
+#
+foreach {tn a b} {
+  1   'helloworld'  '12345'
+  2   22            23
+} {
+  set as [db one "SELECT $a"]
+  set bs [db one "SELECT $b"]
+  
+  do_execsql_test e_expr-5.$tn "SELECT $a || $b" [list "${as}${bs}"]
+}
+
+#-------------------------------------------------------------------------
+# Test the % operator.
+#
+# EVIDENCE-OF: R-08914-63790 The operator % outputs the value of its
+# left operand modulo its right operand.
+#
+do_execsql_test e_expr-6.1 {SELECT  72%5}  {2}
+do_execsql_test e_expr-6.2 {SELECT  72%-5} {2}
+do_execsql_test e_expr-6.3 {SELECT -72%-5} {-2}
+do_execsql_test e_expr-6.4 {SELECT -72%5}  {-2}
+
+#-------------------------------------------------------------------------
+# Test that the results of all binary operators are either numeric or 
+# NULL, except for the || operator, which may evaluate to either a text
+# value or NULL.
+#
+# EVIDENCE-OF: R-20665-17792 The result of any binary operator is either
+# a numeric value or NULL, except for the || concatenation operator
+# which always evaluates to either NULL or a text value.
+#
+set literals {
+  1 'abc'        2 'hexadecimal'       3 ''
+  4 123          5 -123                6 0
+  7 123.4        8 0.0                 9 -123.4
+ 10 X'ABCDEF'   11 X''                12 X'0000'
+ 13     NULL
+}
+foreach op $oplist {
+  foreach {n1 rhs} $literals { 
+  foreach {n2 lhs} $literals {
+
+    set t [db one " SELECT typeof($lhs $op $rhs) "]
+    do_test e_expr-7.$opname($op).$n1.$n2 {
+      expr {
+           ($op=="||" && ($t == "text" || $t == "null"))
+        || ($op!="||" && ($t == "integer" || $t == "real" || $t == "null"))
+      }
+    } 1
+
+  }}
+}
+
+#-------------------------------------------------------------------------
+# Test the IS and IS NOT operators.
+#
+# EVIDENCE-OF: R-24731-45773 The IS and IS NOT operators work like = and
+# != except when one or both of the operands are NULL.
+#
+# EVIDENCE-OF: R-06325-15315 In this case, if both operands are NULL,
+# then the IS operator evaluates to 1 (true) and the IS NOT operator
+# evaluates to 0 (false).
+#
+# EVIDENCE-OF: R-19812-36779 If one operand is NULL and the other is
+# not, then the IS operator evaluates to 0 (false) and the IS NOT
+# operator is 1 (true).
+#
+# EVIDENCE-OF: R-61975-13410 It is not possible for an IS or IS NOT
+# expression to evaluate to NULL.
+#
+do_execsql_test e_expr-8.1.1  { SELECT NULL IS     NULL } {1}
+do_execsql_test e_expr-8.1.2  { SELECT 'ab' IS     NULL } {0}
+do_execsql_test e_expr-8.1.3  { SELECT NULL IS     'ab' } {0}
+do_execsql_test e_expr-8.1.4  { SELECT 'ab' IS     'ab' } {1}
+do_execsql_test e_expr-8.1.5  { SELECT NULL ==     NULL } {{}}
+do_execsql_test e_expr-8.1.6  { SELECT 'ab' ==     NULL } {{}}
+do_execsql_test e_expr-8.1.7  { SELECT NULL ==     'ab' } {{}}
+do_execsql_test e_expr-8.1.8  { SELECT 'ab' ==     'ab' } {1}
+do_execsql_test e_expr-8.1.9  { SELECT NULL IS NOT NULL } {0}
+do_execsql_test e_expr-8.1.10 { SELECT 'ab' IS NOT NULL } {1}
+do_execsql_test e_expr-8.1.11 { SELECT NULL IS NOT 'ab' } {1}
+do_execsql_test e_expr-8.1.12 { SELECT 'ab' IS NOT 'ab' } {0}
+do_execsql_test e_expr-8.1.13 { SELECT NULL !=     NULL } {{}}
+do_execsql_test e_expr-8.1.14 { SELECT 'ab' !=     NULL } {{}}
+do_execsql_test e_expr-8.1.15 { SELECT NULL !=     'ab' } {{}}
+do_execsql_test e_expr-8.1.16 { SELECT 'ab' !=     'ab' } {0}
+
+foreach {n1 rhs} $literals { 
+  foreach {n2 lhs} $literals {
+    if {$rhs!="NULL" && $lhs!="NULL"} {
+      set eq [execsql "SELECT $lhs = $rhs, $lhs != $rhs"]
+    } else {
+      set eq [list [expr {$lhs=="NULL" && $rhs=="NULL"}] \
+                   [expr {$lhs!="NULL" || $rhs!="NULL"}]
+      ]
+    }
+    set test e_expr-8.2.$n1.$n2
+    do_execsql_test $test.1 "SELECT $lhs IS $rhs, $lhs IS NOT $rhs" $eq
+    do_execsql_test $test.2 "
+      SELECT ($lhs IS $rhs) IS NULL, ($lhs IS NOT $rhs) IS NULL
+    " {0 0}
+  }
+}
+
+#-------------------------------------------------------------------------
+# Run some tests on the COLLATE "unary postfix operator".
+#
+# This collation sequence reverses both arguments before using 
+# [string compare] to compare them. For example, when comparing the
+# strings 'one' and 'four', return the result of:
+#   
+#   string compare eno ruof
+#
+proc reverse_str {zStr} {
+  set out ""
+  foreach c [split $zStr {}] { set out "${c}${out}" }
+  set out
+}
+proc reverse_collate {zLeft zRight} {
+  string compare [reverse_str $zLeft] [reverse_str $zRight]
+}
+db collate reverse reverse_collate
+
+# EVIDENCE-OF: R-59577-33471 The COLLATE operator is a unary postfix
+# operator that assigns a collating sequence to an expression.
+#
+# EVIDENCE-OF: R-23441-22541 The COLLATE operator has a higher
+# precedence (binds more tightly) than any prefix unary operator or any
+# binary operator.
+#
+do_execsql_test e_expr-9.1 { SELECT  'abcd' < 'bbbb'    COLLATE reverse } 0
+do_execsql_test e_expr-9.2 { SELECT ('abcd' < 'bbbb')   COLLATE reverse } 1
+do_execsql_test e_expr-9.3 { SELECT  'abcd' <= 'bbbb'   COLLATE reverse } 0
+do_execsql_test e_expr-9.4 { SELECT ('abcd' <= 'bbbb')  COLLATE reverse } 1
+
+do_execsql_test e_expr-9.5 { SELECT  'abcd' > 'bbbb'    COLLATE reverse } 1
+do_execsql_test e_expr-9.6 { SELECT ('abcd' > 'bbbb')   COLLATE reverse } 0
+do_execsql_test e_expr-9.7 { SELECT  'abcd' >= 'bbbb'   COLLATE reverse } 1
+do_execsql_test e_expr-9.8 { SELECT ('abcd' >= 'bbbb')  COLLATE reverse } 0
+
+do_execsql_test e_expr-9.10 { SELECT  'abcd' =  'ABCD'  COLLATE nocase } 1
+do_execsql_test e_expr-9.11 { SELECT ('abcd' =  'ABCD') COLLATE nocase } 0
+do_execsql_test e_expr-9.12 { SELECT  'abcd' == 'ABCD'  COLLATE nocase } 1
+do_execsql_test e_expr-9.13 { SELECT ('abcd' == 'ABCD') COLLATE nocase } 0
+do_execsql_test e_expr-9.14 { SELECT  'abcd' IS 'ABCD'  COLLATE nocase } 1
+do_execsql_test e_expr-9.15 { SELECT ('abcd' IS 'ABCD') COLLATE nocase } 0
+
+do_execsql_test e_expr-9.16 { SELECT  'abcd' != 'ABCD'      COLLATE nocase } 0
+do_execsql_test e_expr-9.17 { SELECT ('abcd' != 'ABCD')     COLLATE nocase } 1
+do_execsql_test e_expr-9.18 { SELECT  'abcd' <> 'ABCD'      COLLATE nocase } 0
+do_execsql_test e_expr-9.19 { SELECT ('abcd' <> 'ABCD')     COLLATE nocase } 1
+do_execsql_test e_expr-9.20 { SELECT  'abcd' IS NOT 'ABCD'  COLLATE nocase } 0
+do_execsql_test e_expr-9.21 { SELECT ('abcd' IS NOT 'ABCD') COLLATE nocase } 1
+
+do_execsql_test e_expr-9.22 { 
+  SELECT 'bbb' BETWEEN 'AAA' AND 'CCC' COLLATE nocase 
+} 1
+do_execsql_test e_expr-9.23 { 
+  SELECT ('bbb' BETWEEN 'AAA' AND 'CCC') COLLATE nocase 
+} 0
+
+# EVIDENCE-OF: R-58731-25439 The collating sequence set by the COLLATE
+# operator overrides the collating sequence determined by the COLLATE
+# clause in a table column definition.
+#
+do_execsql_test e_expr-9.24 { 
+  CREATE TABLE t24(a COLLATE NOCASE, b);
+  INSERT INTO t24 VALUES('aaa', 1);
+  INSERT INTO t24 VALUES('bbb', 2);
+  INSERT INTO t24 VALUES('ccc', 3);
+} {}
+do_execsql_test e_expr-9.25 { SELECT 'BBB' = a FROM t24 } {0 1 0}
+do_execsql_test e_expr-9.25 { SELECT a = 'BBB' FROM t24 } {0 1 0}
+do_execsql_test e_expr-9.25 { SELECT 'BBB' = a COLLATE binary FROM t24 } {0 0 0}
+do_execsql_test e_expr-9.25 { SELECT a COLLATE binary = 'BBB' FROM t24 } {0 0 0}
+
+#-------------------------------------------------------------------------
+# Test statements related to literal values.
+#
+# EVIDENCE-OF: R-31536-32008 Literal values may be integers, floating
+# point numbers, strings, BLOBs, or NULLs.
+#
+do_execsql_test e_expr-10.1.1 { SELECT typeof(5)       } {integer}
+do_execsql_test e_expr-10.1.2 { SELECT typeof(5.1)     } {real}
+do_execsql_test e_expr-10.1.3 { SELECT typeof('5.1')   } {text}
+do_execsql_test e_expr-10.1.4 { SELECT typeof(X'ABCD') } {blob}
+do_execsql_test e_expr-10.1.5 { SELECT typeof(NULL)    } {null}
+
+# "Scientific notation is supported for point literal values."
+#
+do_execsql_test e_expr-10.2.1 { SELECT typeof(3.4e-02)    } {real}
+do_execsql_test e_expr-10.2.2 { SELECT typeof(3e+5)       } {real}
+do_execsql_test e_expr-10.2.3 { SELECT 3.4e-02            } {0.034}
+do_execsql_test e_expr-10.2.4 { SELECT 3e+4               } {30000.0}
+
+# EVIDENCE-OF: R-35229-17830 A string constant is formed by enclosing
+# the string in single quotes (').
+#
+# EVIDENCE-OF: R-07100-06606 A single quote within the string can be
+# encoded by putting two single quotes in a row - as in Pascal.
+#
+do_execsql_test e_expr-10.3.1 { SELECT 'is not' }         {{is not}}
+do_execsql_test e_expr-10.3.2 { SELECT typeof('is not') } {text}
+do_execsql_test e_expr-10.3.3 { SELECT 'isn''t' }         {isn't}
+do_execsql_test e_expr-10.3.4 { SELECT typeof('isn''t') } {text}
+
+# EVIDENCE-OF: R-09593-03321 BLOB literals are string literals
+# containing hexadecimal data and preceded by a single "x" or "X"
+# character.
+#
+# EVIDENCE-OF: R-39344-59787 For example: X'53514C697465'
+#
+do_execsql_test e_expr-10.4.1 { SELECT typeof(X'0123456789ABCDEF') } blob
+do_execsql_test e_expr-10.4.2 { SELECT typeof(x'0123456789ABCDEF') } blob
+do_execsql_test e_expr-10.4.3 { SELECT typeof(X'0123456789abcdef') } blob
+do_execsql_test e_expr-10.4.4 { SELECT typeof(x'0123456789abcdef') } blob
+do_execsql_test e_expr-10.4.5 { SELECT typeof(X'53514C697465')     } blob
+
+# EVIDENCE-OF: R-23914-51476 A literal value can also be the token
+# "NULL".
+#
+do_execsql_test e_expr-10.5.1 { SELECT NULL         } {{}}
+do_execsql_test e_expr-10.5.2 { SELECT typeof(NULL) } {null}
+
+#-------------------------------------------------------------------------
+# Test statements related to bound parameters
+#
+
+proc parameter_test {tn sql params result} {
+  set stmt [sqlite3_prepare_v2 db $sql -1]
+
+  foreach {number name} $params {
+    set nm [sqlite3_bind_parameter_name $stmt $number]
+    do_test $tn.name.$number [list set {} $nm] $name
+    sqlite3_bind_int $stmt $number [expr -1 * $number]
+  }
+
+  sqlite3_step $stmt
+
+  set res [list]
+  for {set i 0} {$i < [sqlite3_column_count $stmt]} {incr i} {
+    lappend res [sqlite3_column_text $stmt $i]
+  }
+
+  set rc [sqlite3_finalize $stmt]
+  do_test $tn.rc [list set {} $rc] SQLITE_OK
+  do_test $tn.res [list set {} $res] $result
+}
+
+# EVIDENCE-OF: R-33509-39458 A question mark followed by a number NNN
+# holds a spot for the NNN-th parameter. NNN must be between 1 and
+# SQLITE_MAX_VARIABLE_NUMBER.
+#
+set mvn $SQLITE_MAX_VARIABLE_NUMBER
+parameter_test e_expr-11.1 "
+  SELECT ?1, ?123, ?$SQLITE_MAX_VARIABLE_NUMBER, ?123, ?4
+"   "1 ?1  123 ?123 $mvn ?$mvn 4 ?4"   "-1 -123 -$mvn -123 -4"
+
+set errmsg "variable number must be between ?1 and ?$SQLITE_MAX_VARIABLE_NUMBER"
+foreach {tn param_number} [list \
+  2  0                                    \
+  3  [expr $SQLITE_MAX_VARIABLE_NUMBER+1] \
+  4  [expr $SQLITE_MAX_VARIABLE_NUMBER+2] \
+  5  12345678903456789034567890234567890  \
+  6  2147483648                           \
+  7  2147483649                           \
+  8  4294967296                           \
+  9  4294967297                           \
+  10 9223372036854775808                  \
+  11 9223372036854775809                  \
+  12 18446744073709551616                 \
+  13 18446744073709551617                 \
+] {
+  do_catchsql_test e_expr-11.1.$tn "SELECT ?$param_number" [list 1 $errmsg]
+}
+
+# EVIDENCE-OF: R-33670-36097 A question mark that is not followed by a
+# number creates a parameter with a number one greater than the largest
+# parameter number already assigned.
+#
+# EVIDENCE-OF: R-42938-07030 If this means the parameter number is
+# greater than SQLITE_MAX_VARIABLE_NUMBER, it is an error.
+#
+parameter_test e_expr-11.2.1 "SELECT ?"          {1 {}}       -1
+parameter_test e_expr-11.2.2 "SELECT ?, ?"       {1 {} 2 {}}  {-1 -2}
+parameter_test e_expr-11.2.3 "SELECT ?5, ?"      {5 ?5 6 {}}  {-5 -6}
+parameter_test e_expr-11.2.4 "SELECT ?, ?5"      {1 {} 5 ?5}  {-1 -5}
+parameter_test e_expr-11.2.5 "SELECT ?, ?456, ?" {
+  1 {} 456 ?456 457 {}
+}  {-1 -456 -457}
+parameter_test e_expr-11.2.5 "SELECT ?, ?456, ?4, ?" {
+  1 {} 456 ?456 4 ?4 457 {}
+}  {-1 -456 -4 -457}
+foreach {tn sql} [list                           \
+  1  "SELECT ?$mvn, ?"                           \
+  2  "SELECT ?[expr $mvn-5], ?, ?, ?, ?, ?, ?"   \
+  3  "SELECT ?[expr $mvn], ?5, ?6, ?"            \
+] {
+  do_catchsql_test e_expr-11.3.$tn $sql [list 1 {too many SQL variables}]
+}
+
+# EVIDENCE-OF: R-11620-22743 A colon followed by an identifier name
+# holds a spot for a named parameter with the name :AAAA.
+#
+# Identifiers in SQLite consist of alphanumeric, '_' and '$' characters,
+# and any UTF characters with codepoints larger than 127 (non-ASCII 
+# characters).
+#
+parameter_test e_expr-11.2.1 {SELECT :AAAA}         {1 :AAAA}       -1
+parameter_test e_expr-11.2.2 {SELECT :123}          {1 :123}        -1
+parameter_test e_expr-11.2.3 {SELECT :__}           {1 :__}         -1
+parameter_test e_expr-11.2.4 {SELECT :_$_}          {1 :_$_}        -1
+parameter_test e_expr-11.2.5 "
+  SELECT :\u0e40\u0e2d\u0e28\u0e02\u0e39\u0e40\u0e2d\u0e25
+" "1 :\u0e40\u0e2d\u0e28\u0e02\u0e39\u0e40\u0e2d\u0e25" -1
+parameter_test e_expr-11.2.6 "SELECT :\u0080" "1 :\u0080" -1
+
+# EVIDENCE-OF: R-49783-61279 An "at" sign works exactly like a colon,
+# except that the name of the parameter created is @AAAA.
+#
+parameter_test e_expr-11.3.1 {SELECT @AAAA}         {1 @AAAA}       -1
+parameter_test e_expr-11.3.2 {SELECT @123}          {1 @123}        -1
+parameter_test e_expr-11.3.3 {SELECT @__}           {1 @__}         -1
+parameter_test e_expr-11.3.4 {SELECT @_$_}          {1 @_$_}        -1
+parameter_test e_expr-11.3.5 "
+  SELECT @\u0e40\u0e2d\u0e28\u0e02\u0e39\u0e40\u0e2d\u0e25
+" "1 @\u0e40\u0e2d\u0e28\u0e02\u0e39\u0e40\u0e2d\u0e25" -1
+parameter_test e_expr-11.3.6 "SELECT @\u0080" "1 @\u0080" -1
+
+# EVIDENCE-OF: R-62610-51329 A dollar-sign followed by an identifier
+# name also holds a spot for a named parameter with the name $AAAA.
+#
+# EVIDENCE-OF: R-55025-21042 The identifier name in this case can
+# include one or more occurrences of "::" and a suffix enclosed in
+# "(...)" containing any text at all.
+#
+# Note: Looks like an identifier cannot consist entirely of "::" 
+# characters or just a suffix. Also, the other named variable characters
+# (: and @) work the same way internally. Why not just document it that way?
+#
+parameter_test e_expr-11.4.1 {SELECT $AAAA}         {1 $AAAA}       -1
+parameter_test e_expr-11.4.2 {SELECT $123}          {1 $123}        -1
+parameter_test e_expr-11.4.3 {SELECT $__}           {1 $__}         -1
+parameter_test e_expr-11.4.4 {SELECT $_$_}          {1 $_$_}        -1
+parameter_test e_expr-11.4.5 "
+  SELECT \$\u0e40\u0e2d\u0e28\u0e02\u0e39\u0e40\u0e2d\u0e25
+" "1 \$\u0e40\u0e2d\u0e28\u0e02\u0e39\u0e40\u0e2d\u0e25" -1
+parameter_test e_expr-11.4.6 "SELECT \$\u0080" "1 \$\u0080" -1
+
+parameter_test e_expr-11.5.1 {SELECT $::::a(++--++)} {1 $::::a(++--++)} -1
+parameter_test e_expr-11.5.2 {SELECT $::a()} {1 $::a()} -1
+parameter_test e_expr-11.5.3 {SELECT $::1(::#$)} {1 $::1(::#$)} -1
+ 
+# EVIDENCE-OF: R-11370-04520 Named parameters are also numbered. The
+# number assigned is one greater than the largest parameter number
+# already assigned.
+#
+# EVIDENCE-OF: R-42620-22184 If this means the parameter would be
+# assigned a number greater than SQLITE_MAX_VARIABLE_NUMBER, it is an
+# error.
+#
+parameter_test e_expr-11.6.1 "SELECT ?, @abc"    {1 {} 2 @abc} {-1 -2}
+parameter_test e_expr-11.6.2 "SELECT ?123, :a1"  {123 ?123 124 :a1} {-123 -124}
+parameter_test e_expr-11.6.3 {SELECT $a, ?8, ?, $b, ?2, $c} {
+  1 $a 8 ?8 9 {} 10 $b 2 ?2 11 $c
+} {-1 -8 -9 -10 -2 -11}
+foreach {tn sql} [list                           \
+  1  "SELECT ?$mvn, \$::a"                       \
+  2  "SELECT ?$mvn, ?4, @a1"                     \
+  3  "SELECT ?[expr $mvn-2], :bag, @123, \$x"    \
+] {
+  do_catchsql_test e_expr-11.7.$tn $sql [list 1 {too many SQL variables}]
+}
+
+# EVIDENCE-OF: R-14068-49671 Parameters that are not assigned values
+# using sqlite3_bind() are treated as NULL.
+#
+do_test e_expr-11.7.1 {
+  set stmt [sqlite3_prepare_v2 db { SELECT ?, :a, @b, $d } -1]
+  sqlite3_step $stmt
+
+  list [sqlite3_column_type $stmt 0] \
+       [sqlite3_column_type $stmt 1] \
+       [sqlite3_column_type $stmt 2] \
+       [sqlite3_column_type $stmt 3] 
+} {NULL NULL NULL NULL}
+do_test e_expr-11.7.1 { sqlite3_finalize $stmt } SQLITE_OK
+
+#-------------------------------------------------------------------------
+# "Test" the syntax diagrams in lang_expr.html.
+#
+# EVIDENCE-OF: R-62067-43884 -- syntax diagram signed-number
+#
+do_execsql_test e_expr-12.1.1 { SELECT 0, +0, -0 } {0 0 0}
+do_execsql_test e_expr-12.1.2 { SELECT 1, +1, -1 } {1 1 -1}
+do_execsql_test e_expr-12.1.3 { SELECT 2, +2, -2 } {2 2 -2}
+do_execsql_test e_expr-12.1.4 { 
+  SELECT 1.4, +1.4, -1.4 
+} {1.4 1.4 -1.4}
+do_execsql_test e_expr-12.1.5 { 
+  SELECT 1.5e+5, +1.5e+5, -1.5e+5 
+} {150000.0 150000.0 -150000.0}
+do_execsql_test e_expr-12.1.6 { 
+  SELECT 0.0001, +0.0001, -0.0001 
+} {0.0001 0.0001 -0.0001}
+
+# EVIDENCE-OF: R-21258-25489 -- syntax diagram literal-value
+#
+set sqlite_current_time 1
+do_execsql_test e_expr-12.2.1 {SELECT 123}               {123}
+do_execsql_test e_expr-12.2.2 {SELECT 123.4e05}          {12340000.0}
+do_execsql_test e_expr-12.2.3 {SELECT 'abcde'}           {abcde}
+do_execsql_test e_expr-12.2.4 {SELECT X'414243'}         {ABC}
+do_execsql_test e_expr-12.2.5 {SELECT NULL}              {{}}
+do_execsql_test e_expr-12.2.6 {SELECT CURRENT_TIME}      {00:00:01}
+do_execsql_test e_expr-12.2.7 {SELECT CURRENT_DATE}      {1970-01-01}
+do_execsql_test e_expr-12.2.8 {SELECT CURRENT_TIMESTAMP} {{1970-01-01 00:00:01}}
+set sqlite_current_time 0
+
+# EVIDENCE-OF: R-57598-59332 -- syntax diagram expr
+#
+file delete -force test.db2
+execsql {
+  ATTACH 'test.db2' AS dbname;
+  CREATE TABLE dbname.tblname(cname);
+}
+
+proc glob {args} {return 1}
+db function glob glob
+db function match glob
+db function regexp glob
+
+foreach {tn expr} {
+  1 123
+  2 123.4e05
+  3 'abcde'
+  4 X'414243'
+  5 NULL
+  6 CURRENT_TIME
+  7 CURRENT_DATE
+  8 CURRENT_TIMESTAMP
+
+  9 ?
+ 10 ?123
+ 11 @hello
+ 12 :world
+ 13 $tcl
+ 14 $tcl(array)
+  
+  15 cname
+  16 tblname.cname
+  17 dbname.tblname.cname
+
+  18 "+ EXPR"
+  19 "- EXPR"
+  20 "NOT EXPR"
+  21 "~ EXPR"
+
+  22 "EXPR1 || EXPR2"
+  23 "EXPR1 * EXPR2"
+  24 "EXPR1 / EXPR2"
+  25 "EXPR1 % EXPR2"
+  26 "EXPR1 + EXPR2"
+  27 "EXPR1 - EXPR2"
+  28 "EXPR1 << EXPR2"
+  29 "EXPR1 >> EXPR2"
+  30 "EXPR1 & EXPR2"
+  31 "EXPR1 | EXPR2"
+  32 "EXPR1 < EXPR2"
+  33 "EXPR1 <= EXPR2"
+  34 "EXPR1 > EXPR2"
+  35 "EXPR1 >= EXPR2"
+  36 "EXPR1 = EXPR2"
+  37 "EXPR1 == EXPR2"
+  38 "EXPR1 != EXPR2"
+  39 "EXPR1 <> EXPR2"
+  40 "EXPR1 IS EXPR2"
+  41 "EXPR1 IS NOT EXPR2"
+  42 "EXPR1 AND EXPR2"
+  43 "EXPR1 OR EXPR2"
+ 
+  44 "count(*)"
+  45 "count(DISTINCT EXPR)"
+  46 "substr(EXPR, 10, 20)"
+  47 "changes()"
+ 
+  48 "( EXPR )"
+ 
+  49 "CAST ( EXPR AS integer )"
+  50 "CAST ( EXPR AS 'abcd' )"
+  51 "CAST ( EXPR AS 'ab$ $cd' )"
+ 
+  52 "EXPR COLLATE nocase"
+  53 "EXPR COLLATE binary"
+ 
+  54 "EXPR1 LIKE EXPR2"
+  55 "EXPR1 LIKE EXPR2 ESCAPE EXPR"
+  56 "EXPR1 GLOB EXPR2"
+  57 "EXPR1 GLOB EXPR2 ESCAPE EXPR"
+  58 "EXPR1 REGEXP EXPR2"
+  59 "EXPR1 REGEXP EXPR2 ESCAPE EXPR"
+  60 "EXPR1 MATCH EXPR2"
+  61 "EXPR1 MATCH EXPR2 ESCAPE EXPR"
+  62 "EXPR1 NOT LIKE EXPR2"
+  63 "EXPR1 NOT LIKE EXPR2 ESCAPE EXPR"
+  64 "EXPR1 NOT GLOB EXPR2"
+  65 "EXPR1 NOT GLOB EXPR2 ESCAPE EXPR"
+  66 "EXPR1 NOT REGEXP EXPR2"
+  67 "EXPR1 NOT REGEXP EXPR2 ESCAPE EXPR"
+  68 "EXPR1 NOT MATCH EXPR2"
+  69 "EXPR1 NOT MATCH EXPR2 ESCAPE EXPR"
+ 
+  70 "EXPR ISNULL"
+  71 "EXPR NOTNULL"
+  72 "EXPR NOT NULL"
+ 
+  73 "EXPR1 IS EXPR2"
+  74 "EXPR1 IS NOT EXPR2"
+
+  75 "EXPR NOT BETWEEN EXPR1 AND EXPR2"
+  76 "EXPR BETWEEN EXPR1 AND EXPR2"
+
+  77 "EXPR NOT IN (SELECT cname FROM tblname)"
+  78 "EXPR NOT IN (1)"
+  79 "EXPR NOT IN (1, 2, 3)"
+  80 "EXPR NOT IN tblname"
+  81 "EXPR NOT IN dbname.tblname"
+  82 "EXPR IN (SELECT cname FROM tblname)"
+  83 "EXPR IN (1)"
+  84 "EXPR IN (1, 2, 3)"
+  85 "EXPR IN tblname"
+  86 "EXPR IN dbname.tblname"
+
+  87 "EXISTS (SELECT cname FROM tblname)"
+  88 "NOT EXISTS (SELECT cname FROM tblname)"
+
+  89 "CASE EXPR WHEN EXPR1 THEN EXPR2 ELSE EXPR END"
+  90 "CASE EXPR WHEN EXPR1 THEN EXPR2 END"
+  91 "CASE EXPR WHEN EXPR1 THEN EXPR2 WHEN EXPR THEN EXPR1 ELSE EXPR2 END"
+  92 "CASE EXPR WHEN EXPR1 THEN EXPR2 WHEN EXPR THEN EXPR1 END"
+  93 "CASE WHEN EXPR1 THEN EXPR2 ELSE EXPR END"
+  94 "CASE WHEN EXPR1 THEN EXPR2 END"
+  95 "CASE WHEN EXPR1 THEN EXPR2 WHEN EXPR THEN EXPR1 ELSE EXPR2 END"
+  96 "CASE WHEN EXPR1 THEN EXPR2 WHEN EXPR THEN EXPR1 END"
+} {
+
+  # If the expression string being parsed contains "EXPR2", then replace
+  # string "EXPR1" and "EXPR2" with arbitrary SQL expressions. If it 
+  # contains "EXPR", then replace EXPR with an arbitrary SQL expression.
+  # 
+  set elist [list $expr]
+  if {[string match *EXPR2* $expr]} {
+    set elist [list]
+    foreach {e1 e2} { cname "34+22" } {
+      lappend elist [string map [list EXPR1 $e1 EXPR2 $e2] $expr]
+    }
+  } 
+  if {[string match *EXPR* $expr]} {
+    set elist2 [list]
+    foreach el $elist {
+      foreach e { cname "34+22" } {
+        lappend elist2 [string map [list EXPR $e] $el]
+      }
+    }
+    set elist $elist2
+  }
+
+  set x 0
+  foreach e $elist {
+    incr x
+    do_test e_expr-12.3.$tn.$x { 
+      set rc [catch { execsql "SELECT $e FROM tblname" } msg]
+    } {0}
+  }
+}
+
+# EVIDENCE-OF: R-49462-56079 -- syntax diagram raise-function
+#
+foreach {tn raiseexpr} {
+  1 "RAISE(IGNORE)"
+  2 "RAISE(ROLLBACK, 'error message')"
+  3 "RAISE(ABORT, 'error message')"
+  4 "RAISE(FAIL, 'error message')"
+} {
+  do_execsql_test e_expr-12.4.$tn "
+    CREATE TRIGGER dbname.tr$tn BEFORE DELETE ON tblname BEGIN
+      SELECT $raiseexpr ;
+    END;
+  " {}
+}
+
+#-------------------------------------------------------------------------
+# Test the statements related to the BETWEEN operator.
+#
+# EVIDENCE-OF: R-40079-54503 The BETWEEN operator is logically
+# equivalent to a pair of comparisons. "x BETWEEN y AND z" is equivalent
+# to "x>=y AND x<=z" except that with BETWEEN, the x expression is
+# only evaluated once.
+#
+db func x x
+proc x {} { incr ::xcount ; return [expr $::x] }
+foreach {tn x expr res nEval} {
+  1  10  "x() >= 5 AND x() <= 15"  1  2
+  2  10  "x() BETWEEN 5 AND 15"    1  1
+
+  3   5  "x() >= 5 AND x() <= 5"   1  2
+  4   5  "x() BETWEEN 5 AND 5"     1  1
+} {
+  do_test e_expr-13.1.$tn {
+    set ::xcount 0
+    set a [execsql "SELECT $expr"]
+    list $::xcount $a
+  } [list $nEval $res]
+}
+
+# EVIDENCE-OF: R-05155-34454 The precedence of the BETWEEN operator is
+# the same as the precedence as operators == and != and LIKE and groups
+# left to right.
+# 
+# Therefore, BETWEEN groups more tightly than operator "AND", but less
+# so than "<".
+#
+do_execsql_test e_expr-13.2.1  { SELECT 1 == 10 BETWEEN 0 AND 2   }  1
+do_execsql_test e_expr-13.2.2  { SELECT (1 == 10) BETWEEN 0 AND 2 }  1
+do_execsql_test e_expr-13.2.3  { SELECT 1 == (10 BETWEEN 0 AND 2) }  0
+do_execsql_test e_expr-13.2.4  { SELECT  6 BETWEEN 4 AND 8 == 1 }    1
+do_execsql_test e_expr-13.2.5  { SELECT (6 BETWEEN 4 AND 8) == 1 }   1
+do_execsql_test e_expr-13.2.6  { SELECT  6 BETWEEN 4 AND (8 == 1) }  0
+
+do_execsql_test e_expr-13.2.7  { SELECT  5 BETWEEN 0 AND 0  != 1 }   1
+do_execsql_test e_expr-13.2.8  { SELECT (5 BETWEEN 0 AND 0) != 1 }   1
+do_execsql_test e_expr-13.2.9  { SELECT  5 BETWEEN 0 AND (0 != 1) }  0
+do_execsql_test e_expr-13.2.10 { SELECT  1 != 0  BETWEEN 0 AND 2  }  1
+do_execsql_test e_expr-13.2.11 { SELECT (1 != 0) BETWEEN 0 AND 2  }  1
+do_execsql_test e_expr-13.2.12 { SELECT  1 != (0 BETWEEN 0 AND 2) }  0
+
+do_execsql_test e_expr-13.2.13 { SELECT 1 LIKE 10 BETWEEN 0 AND 2   }  1
+do_execsql_test e_expr-13.2.14 { SELECT (1 LIKE 10) BETWEEN 0 AND 2 }  1
+do_execsql_test e_expr-13.2.15 { SELECT 1 LIKE (10 BETWEEN 0 AND 2) }  0
+do_execsql_test e_expr-13.2.16 { SELECT  6 BETWEEN 4 AND 8 LIKE 1   }  1
+do_execsql_test e_expr-13.2.17 { SELECT (6 BETWEEN 4 AND 8) LIKE 1  }  1
+do_execsql_test e_expr-13.2.18 { SELECT  6 BETWEEN 4 AND (8 LIKE 1) }  0
+
+do_execsql_test e_expr-13.2.19 { SELECT 0 AND 0 BETWEEN 0 AND 1   } 0
+do_execsql_test e_expr-13.2.20 { SELECT 0 AND (0 BETWEEN 0 AND 1) } 0
+do_execsql_test e_expr-13.2.21 { SELECT (0 AND 0) BETWEEN 0 AND 1 } 1
+do_execsql_test e_expr-13.2.22 { SELECT 0 BETWEEN -1 AND 1 AND 0   } 0
+do_execsql_test e_expr-13.2.23 { SELECT (0 BETWEEN -1 AND 1) AND 0 } 0
+do_execsql_test e_expr-13.2.24 { SELECT 0 BETWEEN -1 AND (1 AND 0) } 1
+
+do_execsql_test e_expr-13.2.25 { SELECT 2 < 3 BETWEEN 0 AND 1   } 1
+do_execsql_test e_expr-13.2.26 { SELECT (2 < 3) BETWEEN 0 AND 1 } 1
+do_execsql_test e_expr-13.2.27 { SELECT 2 < (3 BETWEEN 0 AND 1) } 0
+do_execsql_test e_expr-13.2.28 { SELECT 2 BETWEEN 1 AND 2 < 3    } 0
+do_execsql_test e_expr-13.2.29 { SELECT 2 BETWEEN 1 AND (2 < 3)  } 0
+do_execsql_test e_expr-13.2.30 { SELECT (2 BETWEEN 1 AND 2) < 3  } 1
+
+#-------------------------------------------------------------------------
+# Test the statements related to the LIKE and GLOB operators.
+#
+# EVIDENCE-OF: R-16584-60189 The LIKE operator does a pattern matching
+# comparison.
+#
+# EVIDENCE-OF: R-11295-04657 The operand to the right of the LIKE
+# operator contains the pattern and the left hand operand contains the
+# string to match against the pattern.
+#
+do_execsql_test e_expr-14.1.1 { SELECT 'abc%' LIKE 'abcde' } 0
+do_execsql_test e_expr-14.1.2 { SELECT 'abcde' LIKE 'abc%' } 1
+
+# EVIDENCE-OF: R-55406-38524 A percent symbol ("%") in the LIKE pattern
+# matches any sequence of zero or more characters in the string.
+#
+do_execsql_test e_expr-14.2.1 { SELECT 'abde'    LIKE 'ab%de' } 1
+do_execsql_test e_expr-14.2.2 { SELECT 'abXde'   LIKE 'ab%de' } 1
+do_execsql_test e_expr-14.2.3 { SELECT 'abABCde' LIKE 'ab%de' } 1
+
+# EVIDENCE-OF: R-30433-25443 An underscore ("_") in the LIKE pattern
+# matches any single character in the string.
+#
+do_execsql_test e_expr-14.3.1 { SELECT 'abde'    LIKE 'ab_de' } 0
+do_execsql_test e_expr-14.3.2 { SELECT 'abXde'   LIKE 'ab_de' } 1
+do_execsql_test e_expr-14.3.3 { SELECT 'abABCde' LIKE 'ab_de' } 0
+
+# EVIDENCE-OF: R-59007-20454 Any other character matches itself or its
+# lower/upper case equivalent (i.e. case-insensitive matching).
+#
+do_execsql_test e_expr-14.4.1 { SELECT 'abc' LIKE 'aBc' } 1
+do_execsql_test e_expr-14.4.2 { SELECT 'aBc' LIKE 'aBc' } 1
+do_execsql_test e_expr-14.4.3 { SELECT 'ac'  LIKE 'aBc' } 0
+
+# EVIDENCE-OF: R-23648-58527 SQLite only understands upper/lower case
+# for ASCII characters by default.
+#
+# EVIDENCE-OF: R-04532-11527 The LIKE operator is case sensitive by
+# default for unicode characters that are beyond the ASCII range.
+#
+# EVIDENCE-OF: R-44381-11669 the expression
+# 'a'&nbsp;LIKE&nbsp;'A' is TRUE but
+# '&aelig;'&nbsp;LIKE&nbsp;'&AElig;' is FALSE.
+#
+#   The restriction to ASCII characters does not apply if the ICU
+#   library is compiled in. When ICU is enabled SQLite does not act
+#   as it does "by default".
+#
+do_execsql_test e_expr-14.5.1 { SELECT 'A' LIKE 'a'         } 1
+ifcapable !icu {
+  do_execsql_test e_expr-14.5.2 "SELECT '\u00c6' LIKE '\u00e6'" 0
+}
+
+# EVIDENCE-OF: R-56683-13731 If the optional ESCAPE clause is present,
+# then the expression following the ESCAPE keyword must evaluate to a
+# string consisting of a single character.
+#
+do_catchsql_test e_expr-14.6.1 { 
+  SELECT 'A' LIKE 'a' ESCAPE '12' 
+} {1 {ESCAPE expression must be a single character}}
+do_catchsql_test e_expr-14.6.2 { 
+  SELECT 'A' LIKE 'a' ESCAPE '' 
+} {1 {ESCAPE expression must be a single character}}
+do_catchsql_test e_expr-14.6.3 { SELECT 'A' LIKE 'a' ESCAPE 'x' }    {0 1}
+do_catchsql_test e_expr-14.6.4 "SELECT 'A' LIKE 'a' ESCAPE '\u00e6'" {0 1}
+
+# EVIDENCE-OF: R-02045-23762 This character may be used in the LIKE
+# pattern to include literal percent or underscore characters.
+#
+# EVIDENCE-OF: R-13345-31830 The escape character followed by a percent
+# symbol (%), underscore (_), or a second instance of the escape
+# character itself matches a literal percent symbol, underscore, or a
+# single escape character, respectively.
+#
+do_execsql_test e_expr-14.7.1  { SELECT 'abc%'  LIKE 'abcX%' ESCAPE 'X' } 1
+do_execsql_test e_expr-14.7.2  { SELECT 'abc5'  LIKE 'abcX%' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.3  { SELECT 'abc'   LIKE 'abcX%' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.4  { SELECT 'abcX%' LIKE 'abcX%' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.5  { SELECT 'abc%%' LIKE 'abcX%' ESCAPE 'X' } 0
+
+do_execsql_test e_expr-14.7.6  { SELECT 'abc_'  LIKE 'abcX_' ESCAPE 'X' } 1
+do_execsql_test e_expr-14.7.7  { SELECT 'abc5'  LIKE 'abcX_' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.8  { SELECT 'abc'   LIKE 'abcX_' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.9  { SELECT 'abcX_' LIKE 'abcX_' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.10 { SELECT 'abc__' LIKE 'abcX_' ESCAPE 'X' } 0
+
+do_execsql_test e_expr-14.7.11 { SELECT 'abcX'  LIKE 'abcXX' ESCAPE 'X' } 1
+do_execsql_test e_expr-14.7.12 { SELECT 'abc5'  LIKE 'abcXX' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.13 { SELECT 'abc'   LIKE 'abcXX' ESCAPE 'X' } 0
+do_execsql_test e_expr-14.7.14 { SELECT 'abcXX' LIKE 'abcXX' ESCAPE 'X' } 0
+
+# EVIDENCE-OF: R-51359-17496 The infix LIKE operator is implemented by
+# calling the application-defined SQL functions like(Y,X) or like(Y,X,Z).
+#
+proc likefunc {args} {
+  eval lappend ::likeargs $args
+  return 1
+}
+db func like -argcount 2 likefunc
+db func like -argcount 3 likefunc
+set ::likeargs [list]
+do_execsql_test e_expr-15.1.1 { SELECT 'abc' LIKE 'def' } 1
+do_test         e_expr-15.1.2 { set likeargs } {def abc}
+set ::likeargs [list]
+do_execsql_test e_expr-15.1.3 { SELECT 'abc' LIKE 'def' ESCAPE 'X' } 1
+do_test         e_expr-15.1.4 { set likeargs } {def abc X}
+db close
+sqlite3 db test.db
+
+# EVIDENCE-OF: R-22868-25880 The LIKE operator can be made case
+# sensitive using the case_sensitive_like pragma.
+#
+do_execsql_test e_expr-16.1.1 { SELECT 'abcxyz' LIKE 'ABC%' } 1
+do_execsql_test e_expr-16.1.2 { PRAGMA case_sensitive_like = 1 } {}
+do_execsql_test e_expr-16.1.3 { SELECT 'abcxyz' LIKE 'ABC%' } 0
+do_execsql_test e_expr-16.1.4 { SELECT 'ABCxyz' LIKE 'ABC%' } 1
+do_execsql_test e_expr-16.1.5 { PRAGMA case_sensitive_like = 0 } {}
+do_execsql_test e_expr-16.1.6 { SELECT 'abcxyz' LIKE 'ABC%' } 1
+do_execsql_test e_expr-16.1.7 { SELECT 'ABCxyz' LIKE 'ABC%' } 1
+
+# EVIDENCE-OF: R-52087-12043 The GLOB operator is similar to LIKE but
+# uses the Unix file globbing syntax for its wildcards.
+#
+# EVIDENCE-OF: R-09813-17279 Also, GLOB is case sensitive, unlike LIKE.
+#
+do_execsql_test e_expr-17.1.1 { SELECT 'abcxyz' GLOB 'abc%' } 0
+do_execsql_test e_expr-17.1.2 { SELECT 'abcxyz' GLOB 'abc*' } 1
+do_execsql_test e_expr-17.1.3 { SELECT 'abcxyz' GLOB 'abc___' } 0
+do_execsql_test e_expr-17.1.4 { SELECT 'abcxyz' GLOB 'abc???' } 1
+
+do_execsql_test e_expr-17.1.5 { SELECT 'abcxyz' GLOB 'abc*' } 1
+do_execsql_test e_expr-17.1.6 { SELECT 'ABCxyz' GLOB 'abc*' } 0
+do_execsql_test e_expr-17.1.7 { SELECT 'abcxyz' GLOB 'ABC*' } 0
+
+# EVIDENCE-OF: R-39616-20555 Both GLOB and LIKE may be preceded by the
+# NOT keyword to invert the sense of the test.
+#
+do_execsql_test e_expr-17.2.1 { SELECT 'abcxyz' NOT GLOB 'ABC*' } 1
+do_execsql_test e_expr-17.2.2 { SELECT 'abcxyz' NOT GLOB 'abc*' } 0
+do_execsql_test e_expr-17.2.3 { SELECT 'abcxyz' NOT LIKE 'ABC%' } 0
+do_execsql_test e_expr-17.2.4 { SELECT 'abcxyz' NOT LIKE 'abc%' } 0
+do_execsql_test e_expr-17.2.5 { SELECT 'abdxyz' NOT LIKE 'abc%' } 1
+
+db nullvalue null
+do_execsql_test e_expr-17.2.6 { SELECT 'abcxyz' NOT GLOB NULL } null
+do_execsql_test e_expr-17.2.7 { SELECT 'abcxyz' NOT LIKE NULL } null
+do_execsql_test e_expr-17.2.8 { SELECT NULL NOT GLOB 'abc*' } null
+do_execsql_test e_expr-17.2.9 { SELECT NULL NOT LIKE 'ABC%' } null
+db nullvalue {}
+
+# EVIDENCE-OF: R-39414-35489 The infix GLOB operator is implemented by
+# calling the function glob(Y,X) and can be modified by overriding that
+# function.
+proc globfunc {args} {
+  eval lappend ::globargs $args
+  return 1
+}
+db func glob -argcount 2 globfunc
+set ::globargs [list]
+do_execsql_test e_expr-17.3.1 { SELECT 'abc' GLOB 'def' } 1
+do_test         e_expr-17.3.2 { set globargs } {def abc}
+set ::globargs [list]
+do_execsql_test e_expr-17.3.3 { SELECT 'X' NOT GLOB 'Y' } 0
+do_test         e_expr-17.3.4 { set globargs } {Y X}
+sqlite3 db test.db
+
+# EVIDENCE-OF: R-41650-20872 No regexp() user function is defined by
+# default and so use of the REGEXP operator will normally result in an
+# error message.
+#
+#   There is a regexp function if ICU is enabled though.
+#
+ifcapable !icu {
+  do_catchsql_test e_expr-18.1.1 { 
+    SELECT regexp('abc', 'def') 
+  } {1 {no such function: regexp}}
+  do_catchsql_test e_expr-18.1.2 { 
+    SELECT 'abc' REGEXP 'def'
+  } {1 {no such function: REGEXP}}
+}
+
+# EVIDENCE-OF: R-33693-50180 The REGEXP operator is a special syntax for
+# the regexp() user function.
+#
+# EVIDENCE-OF: R-57289-13578 If a application-defined SQL function named
+# "regexp" is added at run-time, that function will be called in order
+# to implement the REGEXP operator.
+#
+proc regexpfunc {args} {
+  eval lappend ::regexpargs $args
+  return 1
+}
+db func regexp -argcount 2 regexpfunc
+set ::regexpargs [list]
+do_execsql_test e_expr-18.2.1 { SELECT 'abc' REGEXP 'def' } 1
+do_test         e_expr-18.2.2 { set regexpargs } {def abc}
+set ::regexpargs [list]
+do_execsql_test e_expr-18.2.3 { SELECT 'X' NOT REGEXP 'Y' } 0
+do_test         e_expr-18.2.4 { set regexpargs } {Y X}
+sqlite3 db test.db
+
+# EVIDENCE-OF: R-42037-37826 The default match() function implementation
+# raises an exception and is not really useful for anything.
+#
+do_catchsql_test e_expr-19.1.1 { 
+  SELECT 'abc' MATCH 'def' 
+} {1 {unable to use function MATCH in the requested context}}
+do_catchsql_test e_expr-19.1.2 { 
+  SELECT match('abc', 'def')
+} {1 {unable to use function MATCH in the requested context}}
+
+# EVIDENCE-OF: R-37916-47407 The MATCH operator is a special syntax for
+# the match() application-defined function.
+#
+# EVIDENCE-OF: R-06021-09373 But extensions can override the match()
+# function with more helpful logic.
+#
+proc matchfunc {args} {
+  eval lappend ::matchargs $args
+  return 1
+}
+db func match -argcount 2 matchfunc
+set ::matchargs [list]
+do_execsql_test e_expr-19.2.1 { SELECT 'abc' MATCH 'def' } 1
+do_test         e_expr-19.2.2 { set matchargs } {def abc}
+set ::matchargs [list]
+do_execsql_test e_expr-19.2.3 { SELECT 'X' NOT MATCH 'Y' } 0
+do_test         e_expr-19.2.4 { set matchargs } {Y X}
+sqlite3 db test.db
+
+#-------------------------------------------------------------------------
+# Test cases for the testable statements related to the CASE expression.
+#
+# EVIDENCE-OF: R-15199-61389 There are two basic forms of the CASE
+# expression: those with a base expression and those without.
+#
+do_execsql_test e_expr-20.1 {
+  SELECT CASE WHEN 1 THEN 'true' WHEN 0 THEN 'false' ELSE 'else' END;
+} {true}
+do_execsql_test e_expr-20.2 {
+  SELECT CASE 0 WHEN 1 THEN 'true' WHEN 0 THEN 'false' ELSE 'else' END;
+} {false}
+
+proc var {nm} {
+  lappend ::varlist $nm
+  return [set "::$nm"]
+}
+db func var var
+
+# EVIDENCE-OF: R-30638-59954 In a CASE without a base expression, each
+# WHEN expression is evaluated and the result treated as a boolean,
+# starting with the leftmost and continuing to the right.
+#
+foreach {a b c} {0 0 0} break
+set varlist [list]
+do_execsql_test e_expr-21.1.1 {
+  SELECT CASE WHEN var('a') THEN 'A' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('c') THEN 'C' END
+} {{}}
+do_test e_expr-21.1.2 { set varlist } {a b c}
+set varlist [list]
+do_execsql_test e_expr-21.1.3 {
+  SELECT CASE WHEN var('c') THEN 'C' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('a') THEN 'A' 
+              ELSE 'no result'
+  END
+} {{no result}}
+do_test e_expr-21.1.4 { set varlist } {c b a}
+
+# EVIDENCE-OF: R-39009-25596 The result of the CASE expression is the
+# evaluation of the THEN expression that corresponds to the first WHEN
+# expression that evaluates to true.
+#
+foreach {a b c} {0 1 0} break
+do_execsql_test e_expr-21.2.1 {
+  SELECT CASE WHEN var('a') THEN 'A' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('c') THEN 'C' 
+              ELSE 'no result'
+  END
+} {B}
+foreach {a b c} {0 1 1} break
+do_execsql_test e_expr-21.2.2 {
+  SELECT CASE WHEN var('a') THEN 'A' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('c') THEN 'C'
+              ELSE 'no result'
+  END
+} {B}
+foreach {a b c} {0 0 1} break
+do_execsql_test e_expr-21.2.3 {
+  SELECT CASE WHEN var('a') THEN 'A' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('c') THEN 'C'
+              ELSE 'no result'
+  END
+} {C}
+
+# EVIDENCE-OF: R-24227-04807 Or, if none of the WHEN expressions
+# evaluate to true, the result of evaluating the ELSE expression, if
+# any.
+#
+foreach {a b c} {0 0 0} break
+do_execsql_test e_expr-21.3.1 {
+  SELECT CASE WHEN var('a') THEN 'A' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('c') THEN 'C'
+              ELSE 'no result'
+  END
+} {{no result}}
+
+# EVIDENCE-OF: R-14168-07579 If there is no ELSE expression and none of
+# the WHEN expressions are true, then the overall result is NULL.
+#
+db nullvalue null
+do_execsql_test e_expr-21.3.2 {
+  SELECT CASE WHEN var('a') THEN 'A' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('c') THEN 'C'
+  END
+} {null}
+db nullvalue {}
+
+# EVIDENCE-OF: R-13943-13592 A NULL result is considered untrue when
+# evaluating WHEN terms.
+#
+do_execsql_test e_expr-21.4.1 {
+  SELECT CASE WHEN NULL THEN 'A' WHEN 1 THEN 'B' END
+} {B}
+do_execsql_test e_expr-21.4.2 {
+  SELECT CASE WHEN 0 THEN 'A' WHEN NULL THEN 'B' ELSE 'C' END
+} {C}
+
+# EVIDENCE-OF: R-38620-19499 In a CASE with a base expression, the base
+# expression is evaluated just once and the result is compared against
+# the evaluation of each WHEN expression from left to right.
+#
+# Note: This test case tests the "evaluated just once" part of the above
+# statement. Tests associated with the next two statements test that the
+# comparisons take place.
+#
+foreach {a b c} [list [expr 3] [expr 4] [expr 5]] break
+set ::varlist [list]
+do_execsql_test e_expr-22.1.1 {
+  SELECT CASE var('a') WHEN 1 THEN 'A' WHEN 2 THEN 'B' WHEN 3 THEN 'C' END
+} {C}
+do_test e_expr-22.1.2 { set ::varlist } {a}
+
+# EVIDENCE-OF: R-07667-49537 The result of the CASE expression is the
+# evaluation of the THEN expression that corresponds to the first WHEN
+# expression for which the comparison is true.
+#
+do_execsql_test e_expr-22.2.1 {
+  SELECT CASE 23 WHEN 1 THEN 'A' WHEN 23 THEN 'B' WHEN 23 THEN 'C' END
+} {B}
+do_execsql_test e_expr-22.2.2 {
+  SELECT CASE 1 WHEN 1 THEN 'A' WHEN 23 THEN 'B' WHEN 23 THEN 'C' END
+} {A}
+
+# EVIDENCE-OF: R-47543-32145 Or, if none of the WHEN expressions
+# evaluate to a value equal to the base expression, the result of
+# evaluating the ELSE expression, if any.
+#
+do_execsql_test e_expr-22.3.1 {
+  SELECT CASE 24 WHEN 1 THEN 'A' WHEN 23 THEN 'B' WHEN 23 THEN 'C' ELSE 'D' END
+} {D}
+
+# EVIDENCE-OF: R-54721-48557 If there is no ELSE expression and none of
+# the WHEN expressions produce a result equal to the base expression,
+# the overall result is NULL.
+#
+do_execsql_test e_expr-22.4.1 {
+  SELECT CASE 24 WHEN 1 THEN 'A' WHEN 23 THEN 'B' WHEN 23 THEN 'C' END
+} {{}}
+db nullvalue null
+do_execsql_test e_expr-22.4.2 {
+  SELECT CASE 24 WHEN 1 THEN 'A' WHEN 23 THEN 'B' WHEN 23 THEN 'C' END
+} {null}
+db nullvalue {}
+
+# EVIDENCE-OF: R-11479-62774 When comparing a base expression against a
+# WHEN expression, the same collating sequence, affinity, and
+# NULL-handling rules apply as if the base expression and WHEN
+# expression are respectively the left- and right-hand operands of an =
+# operator.
+#
+proc rev {str} {
+  set ret ""
+  set chars [split $str]
+  for {set i [expr [llength $chars]-1]} {$i>=0} {incr i -1} {
+    append ret [lindex $chars $i]
+  }
+  set ret
+}
+proc reverse {lhs rhs} {
+  string compare [rev $lhs] [ref $rhs]
+}
+db collate reverse reverse
+do_execsql_test e_expr-23.1.1 {
+  CREATE TABLE t1(
+    a TEXT     COLLATE NOCASE,
+    b          COLLATE REVERSE,
+    c INTEGER,
+    d BLOB
+  );
+  INSERT INTO t1 VALUES('abc', 'cba', 55, 34.5);
+} {}
+do_execsql_test e_expr-23.1.2 {
+  SELECT CASE a WHEN 'xyz' THEN 'A' WHEN 'AbC' THEN 'B' END FROM t1
+} {B}
+do_execsql_test e_expr-23.1.3 {
+  SELECT CASE 'AbC' WHEN 'abc' THEN 'A' WHEN a THEN 'B' END FROM t1
+} {B}
+do_execsql_test e_expr-23.1.4 {
+  SELECT CASE a WHEN b THEN 'A' ELSE 'B' END FROM t1
+} {B}
+do_execsql_test e_expr-23.1.5 {
+  SELECT CASE b WHEN a THEN 'A' ELSE 'B' END FROM t1
+} {A}
+do_execsql_test e_expr-23.1.6 {
+  SELECT CASE 55 WHEN '55' THEN 'A' ELSE 'B' END
+} {B}
+do_execsql_test e_expr-23.1.7 {
+  SELECT CASE c WHEN '55' THEN 'A' ELSE 'B' END FROM t1
+} {A}
+do_execsql_test e_expr-23.1.8 {
+  SELECT CASE '34.5' WHEN d THEN 'A' ELSE 'B' END FROM t1
+} {B}
+do_execsql_test e_expr-23.1.9 {
+  SELECT CASE NULL WHEN NULL THEN 'A' ELSE 'B' END
+} {B}
+
+# EVIDENCE-OF: R-37304-39405 If the base expression is NULL then the
+# result of the CASE is always the result of evaluating the ELSE
+# expression if it exists, or NULL if it does not.
+#
+do_execsql_test e_expr-24.1.1 {
+  SELECT CASE NULL WHEN 'abc' THEN 'A' WHEN 'def' THEN 'B' END;
+} {{}}
+do_execsql_test e_expr-24.1.2 {
+  SELECT CASE NULL WHEN 'abc' THEN 'A' WHEN 'def' THEN 'B' ELSE 'C' END;
+} {C}
+
+# EVIDENCE-OF: R-56280-17369 Both forms of the CASE expression use lazy,
+# or short-circuit, evaluation.
+#
+set varlist [list]
+foreach {a b c} {0 1 0} break
+do_execsql_test e_expr-25.1.1 {
+  SELECT CASE WHEN var('a') THEN 'A' 
+              WHEN var('b') THEN 'B' 
+              WHEN var('c') THEN 'C' 
+  END
+} {B}
+do_test e_expr-25.1.2 { set ::varlist } {a b}
+set varlist [list]
+do_execsql_test e_expr-25.1.3 {
+  SELECT CASE '0' WHEN var('a') THEN 'A' 
+                  WHEN var('b') THEN 'B' 
+                  WHEN var('c') THEN 'C' 
+  END
+} {A}
+do_test e_expr-25.1.4 { set ::varlist } {a}
+
+# EVIDENCE-OF: R-34773-62253 The only difference between the following
+# two CASE expressions is that the x expression is evaluated exactly
+# once in the first example but might be evaluated multiple times in the
+# second: CASE x WHEN w1 THEN r1 WHEN w2 THEN r2 ELSE r3 END CASE WHEN
+# x=w1 THEN r1 WHEN x=w2 THEN r2 ELSE r3 END
+#
+proc ceval {x} {
+  incr ::evalcount
+  return $x
+}
+db func ceval ceval
+set ::evalcount 0
+
+do_execsql_test e_expr-26.1.1 {
+  CREATE TABLE t2(x, w1, r1, w2, r2, r3);
+  INSERT INTO t2 VALUES(1, 1, 'R1', 2, 'R2', 'R3');
+  INSERT INTO t2 VALUES(2, 1, 'R1', 2, 'R2', 'R3');
+  INSERT INTO t2 VALUES(3, 1, 'R1', 2, 'R2', 'R3');
+} {}
+do_execsql_test e_expr-26.1.2 {
+  SELECT CASE x WHEN w1 THEN r1 WHEN w2 THEN r2 ELSE r3 END FROM t2
+} {R1 R2 R3}
+do_execsql_test e_expr-26.1.3 {
+  SELECT CASE WHEN x=w1 THEN r1 WHEN x=w2 THEN r2 ELSE r3 END FROM t2
+} {R1 R2 R3}
+
+do_execsql_test e_expr-26.1.4 {
+  SELECT CASE ceval(x) WHEN w1 THEN r1 WHEN w2 THEN r2 ELSE r3 END FROM t2
+} {R1 R2 R3}
+do_test e_expr-26.1.5 { set ::evalcount } {3}
+set ::evalcount 0
+do_execsql_test e_expr-26.1.6 {
+  SELECT CASE 
+    WHEN ceval(x)=w1 THEN r1 
+    WHEN ceval(x)=w2 THEN r2 
+    ELSE r3 END 
+  FROM t2
+} {R1 R2 R3}
+do_test e_expr-26.1.6 { set ::evalcount } {5}
+
+
+#-------------------------------------------------------------------------
+# Test statements related to CAST expressions.
+#
+# EVIDENCE-OF: R-65079-31758 Application of a CAST expression is
+# different to application of a column affinity, as with a CAST
+# expression the storage class conversion is forced even if it is lossy
+# and irrreversible.
+#
+do_execsql_test e_expr-27.1.1 {
+  CREATE TABLE t3(a TEXT, b REAL, c INTEGER);
+  INSERT INTO t3 VALUES(X'555655', '1.23abc', 4.5);
+  SELECT typeof(a), a, typeof(b), b, typeof(c), c FROM t3;
+} {blob UVU text 1.23abc real 4.5}
+do_execsql_test e_expr-27.1.2 {
+  SELECT 
+    typeof(CAST(X'555655' as TEXT)), CAST(X'555655' as TEXT),
+    typeof(CAST('1.23abc' as REAL)), CAST('1.23abc' as REAL),
+    typeof(CAST(4.5 as INTEGER)), CAST(4.5 as INTEGER)
+} {text UVU real 1.23 integer 4}
+
+# EVIDENCE-OF: R-27225-65050 If the value of <expr> is NULL, then
+# the result of the CAST expression is also NULL.
+#
+do_expr_test e_expr-27.2.1 { CAST(NULL AS integer) } null {}
+do_expr_test e_expr-27.2.2 { CAST(NULL AS text) }    null {}
+do_expr_test e_expr-27.2.3 { CAST(NULL AS blob) }    null {}
+do_expr_test e_expr-27.2.4 { CAST(NULL AS number) }  null {}
+
+# EVIDENCE-OF: R-31076-23575 Casting a value to a <type-name> with
+# no affinity causes the value to be converted into a BLOB.
+#
+do_expr_test e_expr-27.3.1 { CAST('abc' AS blob)       } blob abc
+do_expr_test e_expr-27.3.2 { CAST('def' AS shobblob_x) } blob def
+do_expr_test e_expr-27.3.3 { CAST('ghi' AS abbLOb10)   } blob ghi
+
+# EVIDENCE-OF: R-22956-37754 Casting to a BLOB consists of first casting
+# the value to TEXT in the encoding of the database connection, then
+# interpreting the resulting byte sequence as a BLOB instead of as TEXT.
+#
+do_qexpr_test e_expr-27.4.1 { CAST('ghi' AS blob) } X'676869'
+do_qexpr_test e_expr-27.4.2 { CAST(456 AS blob) }   X'343536'
+do_qexpr_test e_expr-27.4.3 { CAST(1.78 AS blob) }  X'312E3738'
+rename db db2
+sqlite3 db :memory:
+ifcapable {utf16} {
+db eval { PRAGMA encoding = 'utf-16le' }
+do_qexpr_test e_expr-27.4.4 { CAST('ghi' AS blob) } X'670068006900'
+do_qexpr_test e_expr-27.4.5 { CAST(456 AS blob) }   X'340035003600'
+do_qexpr_test e_expr-27.4.6 { CAST(1.78 AS blob) }  X'31002E0037003800'
+}
+db close
+sqlite3 db :memory:
+db eval { PRAGMA encoding = 'utf-16be' }
+ifcapable {utf16} {
+do_qexpr_test e_expr-27.4.7 { CAST('ghi' AS blob) } X'006700680069'
+do_qexpr_test e_expr-27.4.8 { CAST(456 AS blob) }   X'003400350036'
+do_qexpr_test e_expr-27.4.9 { CAST(1.78 AS blob) }  X'0031002E00370038'
+}
+db close
+rename db2 db
+
+# EVIDENCE-OF: R-04207-37981 To cast a BLOB value to TEXT, the sequence
+# of bytes that make up the BLOB is interpreted as text encoded using
+# the database encoding.
+#
+do_expr_test e_expr-28.1.1 { CAST (X'676869' AS text) } text ghi
+do_expr_test e_expr-28.1.2 { CAST (X'670068006900' AS text) } text g
+rename db db2
+sqlite3 db :memory:
+db eval { PRAGMA encoding = 'utf-16le' }
+ifcapable {utf16} {
+do_expr_test e_expr-28.1.3 { CAST (X'676869' AS text) == 'ghi' } integer 0
+do_expr_test e_expr-28.1.4 { CAST (X'670068006900' AS text) } text ghi
+}
+db close
+rename db2 db
+
+# EVIDENCE-OF: R-22235-47006 Casting an INTEGER or REAL value into TEXT
+# renders the value as if via sqlite3_snprintf() except that the
+# resulting TEXT uses the encoding of the database connection.
+#
+do_expr_test e_expr-28.2.1 { CAST (1 AS text)   }     text 1
+do_expr_test e_expr-28.2.2 { CAST (45 AS text)  }     text 45
+do_expr_test e_expr-28.2.3 { CAST (-45 AS text) }     text -45
+do_expr_test e_expr-28.2.4 { CAST (8.8 AS text)    }  text 8.8
+do_expr_test e_expr-28.2.5 { CAST (2.3e+5 AS text) }  text 230000.0
+do_expr_test e_expr-28.2.6 { CAST (-2.3e-5 AS text) } text -2.3e-05
+do_expr_test e_expr-28.2.7 { CAST (0.0 AS text) }     text 0.0
+do_expr_test e_expr-28.2.7 { CAST (0 AS text) }       text 0
+
+# EVIDENCE-OF: R-26346-36443 When casting a BLOB value to a REAL, the
+# value is first converted to TEXT.
+#
+do_expr_test e_expr-29.1.1 { CAST (X'312E3233' AS REAL) } real 1.23
+do_expr_test e_expr-29.1.2 { CAST (X'3233302E30' AS REAL) } real 230.0
+do_expr_test e_expr-29.1.3 { CAST (X'2D392E3837' AS REAL) } real -9.87
+do_expr_test e_expr-29.1.4 { CAST (X'302E30303031' AS REAL) } real 0.0001
+rename db db2
+sqlite3 db :memory:
+ifcapable {utf16} {
+db eval { PRAGMA encoding = 'utf-16le' }
+do_expr_test e_expr-29.1.5 { 
+    CAST (X'31002E0032003300' AS REAL) } real 1.23
+do_expr_test e_expr-29.1.6 { 
+    CAST (X'3200330030002E003000' AS REAL) } real 230.0
+do_expr_test e_expr-29.1.7 { 
+    CAST (X'2D0039002E0038003700' AS REAL) } real -9.87
+do_expr_test e_expr-29.1.8 { 
+    CAST (X'30002E003000300030003100' AS REAL) } real 0.0001
+}
+db close
+rename db2 db
+
+# EVIDENCE-OF: R-54898-34554 When casting a TEXT value to REAL, the
+# longest possible prefix of the value that can be interpreted as a real
+# number is extracted from the TEXT value and the remainder ignored.
+#
+do_expr_test e_expr-29.2.1 { CAST('1.23abcd' AS REAL) } real 1.23
+do_expr_test e_expr-29.2.2 { CAST('1.45.23abcd' AS REAL) } real 1.45
+do_expr_test e_expr-29.2.3 { CAST('-2.12e-01ABC' AS REAL) } real -0.212
+do_expr_test e_expr-29.2.4 { CAST('1 2 3 4' AS REAL) } real 1.0
+
+# EVIDENCE-OF: R-11321-47427 Any leading spaces in the TEXT value are
+# ignored when converging from TEXT to REAL.
+#
+do_expr_test e_expr-29.3.1 { CAST(' 1.23abcd' AS REAL) } real 1.23
+do_expr_test e_expr-29.3.2 { CAST('    1.45.23abcd' AS REAL) } real 1.45
+do_expr_test e_expr-29.3.3 { CAST('   -2.12e-01ABC' AS REAL) } real -0.212
+do_expr_test e_expr-29.3.4 { CAST(' 1 2 3 4' AS REAL) } real 1.0
+
+# EVIDENCE-OF: R-22662-28218 If there is no prefix that can be
+# interpreted as a real number, the result of the conversion is 0.0.
+#
+do_expr_test e_expr-29.4.1 { CAST('' AS REAL) } real 0.0
+do_expr_test e_expr-29.4.2 { CAST('not a number' AS REAL) } real 0.0
+do_expr_test e_expr-29.4.3 { CAST('XXI' AS REAL) } real 0.0
+
+# EVIDENCE-OF: R-21829-14563 When casting a BLOB value to INTEGER, the
+# value is first converted to TEXT.
+#
+do_expr_test e_expr-30.1.1 { CAST(X'313233' AS INTEGER) } integer 123
+do_expr_test e_expr-30.1.2 { CAST(X'2D363738' AS INTEGER) } integer -678
+do_expr_test e_expr-30.1.3 { 
+  CAST(X'31303030303030' AS INTEGER) 
+} integer 1000000
+do_expr_test e_expr-30.1.4 { 
+  CAST(X'2D31313235383939393036383432363234' AS INTEGER) 
+} integer -1125899906842624
+
+rename db db2
+sqlite3 db :memory:
+ifcapable {utf16} {
+execsql { PRAGMA encoding = 'utf-16be' }
+do_expr_test e_expr-30.1.5 { CAST(X'003100320033' AS INTEGER) } integer 123
+do_expr_test e_expr-30.1.6 { CAST(X'002D003600370038' AS INTEGER) } integer -678
+do_expr_test e_expr-30.1.7 { 
+  CAST(X'0031003000300030003000300030' AS INTEGER) 
+} integer 1000000
+do_expr_test e_expr-30.1.8 { 
+  CAST(X'002D0031003100320035003800390039003900300036003800340032003600320034' AS INTEGER) 
+} integer -1125899906842624
+}
+db close
+rename db2 db
+
+# EVIDENCE-OF: R-47612-45842 When casting a TEXT value to INTEGER, the
+# longest possible prefix of the value that can be interpreted as an
+# integer number is extracted from the TEXT value and the remainder
+# ignored.
+#
+do_expr_test e_expr-30.2.1 { CAST('123abcd' AS INT) } integer 123
+do_expr_test e_expr-30.2.2 { CAST('14523abcd' AS INT) } integer 14523
+do_expr_test e_expr-30.2.3 { CAST('-2.12e-01ABC' AS INT) } integer -2
+do_expr_test e_expr-30.2.4 { CAST('1 2 3 4' AS INT) } integer 1
+
+# EVIDENCE-OF: R-34400-33772 Any leading spaces in the TEXT value when
+# converting from TEXT to INTEGER are ignored.
+#
+do_expr_test e_expr-30.3.1 { CAST('   123abcd' AS INT) } integer 123
+do_expr_test e_expr-30.3.2 { CAST('  14523abcd' AS INT) } integer 14523
+do_expr_test e_expr-30.3.3 { CAST(' -2.12e-01ABC' AS INT) } integer -2
+do_expr_test e_expr-30.3.4 { CAST('     1 2 3 4' AS INT) } integer 1
+
+# EVIDENCE-OF: R-43164-44276 If there is no prefix that can be
+# interpreted as an integer number, the result of the conversion is 0.
+#
+do_expr_test e_expr-30.4.1 { CAST('' AS INTEGER) } integer 0
+do_expr_test e_expr-30.4.2 { CAST('not a number' AS INTEGER) } integer 0
+do_expr_test e_expr-30.4.3 { CAST('XXI' AS INTEGER) } integer 0
+
+# EVIDENCE-OF: R-00741-38776 A cast of a REAL value into an INTEGER will
+# truncate the fractional part of the REAL.
+#
+do_expr_test e_expr-31.1.1 { CAST(3.14159 AS INTEGER) } integer 3
+do_expr_test e_expr-31.1.2 { CAST(1.99999 AS INTEGER) } integer 1
+do_expr_test e_expr-31.1.3 { CAST(-1.99999 AS INTEGER) } integer -1
+do_expr_test e_expr-31.1.4 { CAST(-0.99999 AS INTEGER) } integer 0
+
+# EVIDENCE-OF: R-06126-36021 If an REAL is too large to be represented
+# as an INTEGER then the result of the cast is the largest negative
+# integer: -9223372036854775808.
+#
+do_expr_test e_expr-31.2.1 { CAST(2e+50 AS INT) } integer -9223372036854775808
+do_expr_test e_expr-31.2.2 { CAST(-2e+50 AS INT) } integer -9223372036854775808
+do_expr_test e_expr-31.2.3 { 
+  CAST(-9223372036854775809.0 AS INT)
+} integer -9223372036854775808
+do_expr_test e_expr-31.2.4 { 
+  CAST(9223372036854775809.0 AS INT)
+} integer -9223372036854775808
+
+
+# EVIDENCE-OF: R-09295-61337 Casting a TEXT or BLOB value into NUMERIC
+# first does a forced conversion into REAL but then further converts the
+# result into INTEGER if and only if the conversion from REAL to INTEGER
+# is lossless and reversible.
+#
+do_expr_test e_expr-32.1.1 { CAST('45'   AS NUMERIC)  } integer 45
+do_expr_test e_expr-32.1.2 { CAST('45.0' AS NUMERIC)  } integer 45
+do_expr_test e_expr-32.1.3 { CAST('45.2' AS NUMERIC)  } real 45.2
+do_expr_test e_expr-32.1.4 { CAST('11abc' AS NUMERIC) } integer 11
+do_expr_test e_expr-32.1.5 { CAST('11.1abc' AS NUMERIC) } real 11.1
+
+# EVIDENCE-OF: R-30347-18702 Casting a REAL or INTEGER value to NUMERIC
+# is a no-op, even if a real value could be losslessly converted to an
+# integer.
+#
+do_expr_test e_expr-32.2.1 { CAST(13.0 AS NUMERIC) } real 13.0
+do_expr_test e_expr-32.2.2 { CAST(13.5 AS NUMERIC) } real 13.5
+
+do_expr_test e_expr-32.2.3 { 
+  CAST(-9223372036854775808 AS NUMERIC)
+} integer -9223372036854775808
+do_expr_test e_expr-32.2.4 { 
+  CAST(9223372036854775807 AS NUMERIC)
+} integer 9223372036854775807
+
+# EVIDENCE-OF: R-64550-29191 Note that the result from casting any
+# non-BLOB value into a BLOB and the result from casting any BLOB value
+# into a non-BLOB value may be different depending on whether the
+# database encoding is UTF-8, UTF-16be, or UTF-16le.
+#
+ifcapable {utf16} {
+sqlite3 db1 :memory: ; db1 eval { PRAGMA encoding = 'utf-8' }
+sqlite3 db2 :memory: ; db2 eval { PRAGMA encoding = 'utf-16le' }
+sqlite3 db3 :memory: ; db3 eval { PRAGMA encoding = 'utf-16be' }
+foreach {tn castexpr differs} {
+  1 { CAST(123 AS BLOB)    } 1
+  2 { CAST('' AS BLOB)     } 0
+  3 { CAST('abcd' AS BLOB) } 1
+
+  4 { CAST(X'abcd' AS TEXT) } 1
+  5 { CAST(X'' AS TEXT)     } 0
+} {
+  set r1 [db1 eval "SELECT typeof($castexpr), quote($castexpr)"]
+  set r2 [db2 eval "SELECT typeof($castexpr), quote($castexpr)"]
+  set r3 [db3 eval "SELECT typeof($castexpr), quote($castexpr)"]
+
+  if {$differs} {
+    set res [expr {$r1!=$r2 && $r2!=$r3}]
+  } else {
+    set res [expr {$r1==$r2 && $r2==$r3}]
+  }
+
+  do_test e_expr-33.1.$tn {set res} 1
+}
+db1 close
+db2 close
+db3 close
+}
+
+#-------------------------------------------------------------------------
+# Test statements related to the EXISTS and NOT EXISTS operators.
+#
+catch { db close }
+file delete -force test.db
+sqlite3 db test.db
+
+do_execsql_test e_expr-34.1 {
+  CREATE TABLE t1(a, b);
+  INSERT INTO t1 VALUES(1, 2);
+  INSERT INTO t1 VALUES(NULL, 2);
+  INSERT INTO t1 VALUES(1, NULL);
+  INSERT INTO t1 VALUES(NULL, NULL);
+} {}
+
+# EVIDENCE-OF: R-25588-27181 The EXISTS operator always evaluates to one
+# of the integer values 0 and 1.
+#
+# This statement is not tested by itself. Instead, all e_expr-34.* tests 
+# following this point explicitly test that specific invocations of EXISTS
+# return either integer 0 or integer 1.
+#
+
+# EVIDENCE-OF: R-58553-63740 If executing the SELECT statement specified
+# as the right-hand operand of the EXISTS operator would return one or
+# more rows, then the EXISTS operator evaluates to 1.
+#
+foreach {tn expr} {
+    1 { EXISTS ( SELECT a FROM t1 ) }
+    2 { EXISTS ( SELECT b FROM t1 ) }
+    3 { EXISTS ( SELECT 24 ) }
+    4 { EXISTS ( SELECT NULL ) }
+    5 { EXISTS ( SELECT a FROM t1 WHERE a IS NULL ) }
+} {
+  do_expr_test e_expr-34.2.$tn $expr integer 1
+}
+
+# EVIDENCE-OF: R-19673-40972 If executing the SELECT would return no
+# rows at all, then the EXISTS operator evaluates to 0.
+#
+foreach {tn expr} {
+    1 { EXISTS ( SELECT a FROM t1 WHERE 0) }
+    2 { EXISTS ( SELECT b FROM t1 WHERE a = 5) }
+    3 { EXISTS ( SELECT 24 WHERE 0) }
+    4 { EXISTS ( SELECT NULL WHERE 1=2) }
+} {
+  do_expr_test e_expr-34.3.$tn $expr integer 0
+}
+
+# EVIDENCE-OF: R-35109-49139 The number of columns in each row returned
+# by the SELECT statement (if any) and the specific values returned have
+# no effect on the results of the EXISTS operator.
+#
+foreach {tn expr res} {
+    1 { EXISTS ( SELECT * FROM t1 ) }                          1
+    2 { EXISTS ( SELECT *, *, * FROM t1 ) }                    1
+    3 { EXISTS ( SELECT 24, 25 ) }                             1
+    4 { EXISTS ( SELECT NULL, NULL, NULL ) }                   1
+    5 { EXISTS ( SELECT a,b,a||b FROM t1 WHERE a IS NULL ) }   1
+
+    6 { EXISTS ( SELECT a, a FROM t1 WHERE 0) }                0
+    7 { EXISTS ( SELECT b, b, a FROM t1 WHERE a = 5) }         0
+    8 { EXISTS ( SELECT 24, 46, 89 WHERE 0) }                  0
+    9 { EXISTS ( SELECT NULL, NULL WHERE 1=2) }                0
+} {
+  do_expr_test e_expr-34.4.$tn $expr integer $res
+}
+
+# EVIDENCE-OF: R-10645-12439 In particular, rows containing NULL values
+# are not handled any differently from rows without NULL values.
+#
+foreach {tn e1 e2} {
+  1 { EXISTS (SELECT 'not null') }    { EXISTS (SELECT NULL) }
+  2 { EXISTS (SELECT NULL FROM t1) }  { EXISTS (SELECT 'bread' FROM t1) }
+} {
+  set res [db one "SELECT $e1"]
+  do_expr_test e_expr-34.5.${tn}a $e1 integer $res
+  do_expr_test e_expr-34.5.${tn}b $e2 integer $res
+}
+
+#-------------------------------------------------------------------------
+# Test statements related to scalar sub-queries.
+#
+
+catch { db close }
+file delete -force test.db
+sqlite3 db test.db
+do_test e_expr-35.0 {
+  execsql {
+    CREATE TABLE t2(a, b);
+    INSERT INTO t2 VALUES('one', 'two');
+    INSERT INTO t2 VALUES('three', NULL);
+    INSERT INTO t2 VALUES(4, 5.0);
+  }
+} {}
+
+# EVIDENCE-OF: R-00980-39256 A SELECT statement enclosed in parentheses
+# may appear as a scalar quantity.
+#
+# EVIDENCE-OF: R-56294-03966 All types of SELECT statement, including
+# aggregate and compound SELECT queries (queries with keywords like
+# UNION or EXCEPT) are allowed as scalar subqueries.
+#
+do_expr_test e_expr-35.1.1 { (SELECT 35)   } integer 35
+do_expr_test e_expr-35.1.2 { (SELECT NULL) } null {}
+
+do_expr_test e_expr-35.1.3 { (SELECT count(*) FROM t2) } integer 3
+do_expr_test e_expr-35.1.4 { (SELECT 4 FROM t2) } integer 4
+
+do_expr_test e_expr-35.1.5 { 
+  (SELECT b FROM t2 UNION SELECT a+1 FROM t2)
+} null {}
+do_expr_test e_expr-35.1.6 { 
+  (SELECT a FROM t2 UNION SELECT COALESCE(b, 55) FROM t2 ORDER BY 1)
+} integer 4
+
+# EVIDENCE-OF: R-46899-53765 A SELECT used as a scalar quantity must
+# return a result set with a single column.
+#
+# The following block tests that errors are returned in a bunch of cases
+# where a subquery returns more than one column.
+#
+set M {only a single result allowed for a SELECT that is part of an expression}
+foreach {tn sql} {
+  1     { SELECT (SELECT * FROM t2 UNION SELECT a+1, b+1 FROM t2) }
+  2     { SELECT (SELECT * FROM t2 UNION SELECT a+1, b+1 FROM t2 ORDER BY 1) }
+  3     { SELECT (SELECT 1, 2) }
+  4     { SELECT (SELECT NULL, NULL, NULL) }
+  5     { SELECT (SELECT * FROM t2) }
+  6     { SELECT (SELECT * FROM (SELECT 1, 2, 3)) }
+} {
+  do_catchsql_test e_expr-35.2.$tn $sql [list 1 $M]
+}
+
+# EVIDENCE-OF: R-35764-28041 The result of the expression is the value
+# of the only column in the first row returned by the SELECT statement.
+#
+# EVIDENCE-OF: R-41898-06686 If the SELECT yields more than one result
+# row, all rows after the first are ignored.
+#
+do_execsql_test e_expr-36.3.1 {
+  CREATE TABLE t4(x, y);
+  INSERT INTO t4 VALUES(1, 'one');
+  INSERT INTO t4 VALUES(2, 'two');
+  INSERT INTO t4 VALUES(3, 'three');
+} {}
+
+foreach {tn expr restype resval} {
+    2  { ( SELECT x FROM t4 ORDER BY x )      }        integer 1
+    3  { ( SELECT x FROM t4 ORDER BY y )      }        integer 1
+    4  { ( SELECT x FROM t4 ORDER BY x DESC ) }        integer 3
+    5  { ( SELECT x FROM t4 ORDER BY y DESC ) }        integer 2
+    6  { ( SELECT y FROM t4 ORDER BY y DESC ) }        text    two
+
+    7  { ( SELECT sum(x) FROM t4 )           }         integer 6
+    8  { ( SELECT group_concat(y,'') FROM t4 ) }       text    onetwothree
+    9  { ( SELECT max(x) FROM t4 WHERE y LIKE '___') } integer 2 
+
+} {
+  do_expr_test e_expr-36.3.$tn $expr $restype $resval
+}
+
+# EVIDENCE-OF: R-25492-41572 If the SELECT yields no rows, then the
+# value of the expression is NULL.
+#
+foreach {tn expr} {
+    1  { ( SELECT x FROM t4 WHERE x>3 ORDER BY x )      }
+    2  { ( SELECT x FROM t4 WHERE y<'one' ORDER BY y )  }
+} {
+  do_expr_test e_expr-36.4.$tn $expr null {}
+}
+
+
+finish_test
+