| Index: third_party/libphonenumber/cpp/src/base/third_party/dynamic_annotations/dynamic_annotations.h
|
| ===================================================================
|
| --- third_party/libphonenumber/cpp/src/base/third_party/dynamic_annotations/dynamic_annotations.h (revision 0)
|
| +++ third_party/libphonenumber/cpp/src/base/third_party/dynamic_annotations/dynamic_annotations.h (revision 0)
|
| @@ -0,0 +1,590 @@
|
| +/* Copyright (c) 2008-2009, Google Inc.
|
| + * All rights reserved.
|
| + *
|
| + * Redistribution and use in source and binary forms, with or without
|
| + * modification, are permitted provided that the following conditions are
|
| + * met:
|
| + *
|
| + * * Redistributions of source code must retain the above copyright
|
| + * notice, this list of conditions and the following disclaimer.
|
| + * * Neither the name of Google Inc. nor the names of its
|
| + * contributors may be used to endorse or promote products derived from
|
| + * this software without specific prior written permission.
|
| + *
|
| + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
| + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
| + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
| + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
| + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
| + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
| + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
| + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
| + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
| + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
| + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
| + *
|
| + * ---
|
| + * Author: Kostya Serebryany
|
| + */
|
| +
|
| +/* This file defines dynamic annotations for use with dynamic analysis
|
| + tool such as valgrind, PIN, etc.
|
| +
|
| + Dynamic annotation is a source code annotation that affects
|
| + the generated code (that is, the annotation is not a comment).
|
| + Each such annotation is attached to a particular
|
| + instruction and/or to a particular object (address) in the program.
|
| +
|
| + The annotations that should be used by users are macros in all upper-case
|
| + (e.g., ANNOTATE_NEW_MEMORY).
|
| +
|
| + Actual implementation of these macros may differ depending on the
|
| + dynamic analysis tool being used.
|
| +
|
| + See http://code.google.com/p/data-race-test/ for more information.
|
| +
|
| + This file supports the following dynamic analysis tools:
|
| + - None (DYNAMIC_ANNOTATIONS_ENABLED is not defined or zero).
|
| + Macros are defined empty.
|
| + - ThreadSanitizer, Helgrind, DRD (DYNAMIC_ANNOTATIONS_ENABLED is 1).
|
| + Macros are defined as calls to non-inlinable empty functions
|
| + that are intercepted by Valgrind. */
|
| +
|
| +#ifndef __DYNAMIC_ANNOTATIONS_H__
|
| +#define __DYNAMIC_ANNOTATIONS_H__
|
| +
|
| +#ifndef DYNAMIC_ANNOTATIONS_PREFIX
|
| +# define DYNAMIC_ANNOTATIONS_PREFIX
|
| +#endif
|
| +
|
| +#ifndef DYNAMIC_ANNOTATIONS_PROVIDE_RUNNING_ON_VALGRIND
|
| +# define DYNAMIC_ANNOTATIONS_PROVIDE_RUNNING_ON_VALGRIND 1
|
| +#endif
|
| +
|
| +#ifdef DYNAMIC_ANNOTATIONS_WANT_ATTRIBUTE_WEAK
|
| +# ifdef __GNUC__
|
| +# define DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK __attribute__((weak))
|
| +# else
|
| +/* TODO(glider): for Windows support we may want to change this macro in order
|
| + to prepend __declspec(selectany) to the annotations' declarations. */
|
| +# error weak annotations are not supported for your compiler
|
| +# endif
|
| +#else
|
| +# define DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK
|
| +#endif
|
| +
|
| +/* The following preprocessor magic prepends the value of
|
| + DYNAMIC_ANNOTATIONS_PREFIX to annotation function names. */
|
| +#define DYNAMIC_ANNOTATIONS_GLUE0(A, B) A##B
|
| +#define DYNAMIC_ANNOTATIONS_GLUE(A, B) DYNAMIC_ANNOTATIONS_GLUE0(A, B)
|
| +#define DYNAMIC_ANNOTATIONS_NAME(name) \
|
| + DYNAMIC_ANNOTATIONS_GLUE(DYNAMIC_ANNOTATIONS_PREFIX, name)
|
| +
|
| +#ifndef DYNAMIC_ANNOTATIONS_ENABLED
|
| +# define DYNAMIC_ANNOTATIONS_ENABLED 0
|
| +#endif
|
| +
|
| +#if DYNAMIC_ANNOTATIONS_ENABLED != 0
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations useful when implementing condition variables such as CondVar,
|
| + using conditional critical sections (Await/LockWhen) and when constructing
|
| + user-defined synchronization mechanisms.
|
| +
|
| + The annotations ANNOTATE_HAPPENS_BEFORE() and ANNOTATE_HAPPENS_AFTER() can
|
| + be used to define happens-before arcs in user-defined synchronization
|
| + mechanisms: the race detector will infer an arc from the former to the
|
| + latter when they share the same argument pointer.
|
| +
|
| + Example 1 (reference counting):
|
| +
|
| + void Unref() {
|
| + ANNOTATE_HAPPENS_BEFORE(&refcount_);
|
| + if (AtomicDecrementByOne(&refcount_) == 0) {
|
| + ANNOTATE_HAPPENS_AFTER(&refcount_);
|
| + delete this;
|
| + }
|
| + }
|
| +
|
| + Example 2 (message queue):
|
| +
|
| + void MyQueue::Put(Type *e) {
|
| + MutexLock lock(&mu_);
|
| + ANNOTATE_HAPPENS_BEFORE(e);
|
| + PutElementIntoMyQueue(e);
|
| + }
|
| +
|
| + Type *MyQueue::Get() {
|
| + MutexLock lock(&mu_);
|
| + Type *e = GetElementFromMyQueue();
|
| + ANNOTATE_HAPPENS_AFTER(e);
|
| + return e;
|
| + }
|
| +
|
| + Note: when possible, please use the existing reference counting and message
|
| + queue implementations instead of inventing new ones. */
|
| +
|
| + /* Report that wait on the condition variable at address "cv" has succeeded
|
| + and the lock at address "lock" is held. */
|
| + #define ANNOTATE_CONDVAR_LOCK_WAIT(cv, lock) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateCondVarWait)(__FILE__, __LINE__, cv, lock)
|
| +
|
| + /* Report that wait on the condition variable at "cv" has succeeded. Variant
|
| + w/o lock. */
|
| + #define ANNOTATE_CONDVAR_WAIT(cv) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateCondVarWait)(__FILE__, __LINE__, cv, NULL)
|
| +
|
| + /* Report that we are about to signal on the condition variable at address
|
| + "cv". */
|
| + #define ANNOTATE_CONDVAR_SIGNAL(cv) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateCondVarSignal)(__FILE__, __LINE__, cv)
|
| +
|
| + /* Report that we are about to signal_all on the condition variable at address
|
| + "cv". */
|
| + #define ANNOTATE_CONDVAR_SIGNAL_ALL(cv) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateCondVarSignalAll)(__FILE__, __LINE__, cv)
|
| +
|
| + /* Annotations for user-defined synchronization mechanisms. */
|
| + #define ANNOTATE_HAPPENS_BEFORE(obj) ANNOTATE_CONDVAR_SIGNAL(obj)
|
| + #define ANNOTATE_HAPPENS_AFTER(obj) ANNOTATE_CONDVAR_WAIT(obj)
|
| +
|
| + /* DEPRECATED. Don't use it. */
|
| + #define ANNOTATE_PUBLISH_MEMORY_RANGE(pointer, size) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotatePublishMemoryRange)(__FILE__, __LINE__, \
|
| + pointer, size)
|
| +
|
| + /* DEPRECATED. Don't use it. */
|
| + #define ANNOTATE_UNPUBLISH_MEMORY_RANGE(pointer, size) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateUnpublishMemoryRange)(__FILE__, __LINE__, \
|
| + pointer, size)
|
| +
|
| + /* DEPRECATED. Don't use it. */
|
| + #define ANNOTATE_SWAP_MEMORY_RANGE(pointer, size) \
|
| + do { \
|
| + ANNOTATE_UNPUBLISH_MEMORY_RANGE(pointer, size); \
|
| + ANNOTATE_PUBLISH_MEMORY_RANGE(pointer, size); \
|
| + } while (0)
|
| +
|
| + /* Instruct the tool to create a happens-before arc between mu->Unlock() and
|
| + mu->Lock(). This annotation may slow down the race detector and hide real
|
| + races. Normally it is used only when it would be difficult to annotate each
|
| + of the mutex's critical sections individually using the annotations above.
|
| + This annotation makes sense only for hybrid race detectors. For pure
|
| + happens-before detectors this is a no-op. For more details see
|
| + http://code.google.com/p/data-race-test/wiki/PureHappensBeforeVsHybrid . */
|
| + #define ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX(mu) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateMutexIsUsedAsCondVar)(__FILE__, __LINE__, \
|
| + mu)
|
| +
|
| + /* Opposite to ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX.
|
| + Instruct the tool to NOT create h-b arcs between Unlock and Lock, even in
|
| + pure happens-before mode. For a hybrid mode this is a no-op. */
|
| + #define ANNOTATE_NOT_HAPPENS_BEFORE_MUTEX(mu) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateMutexIsNotPHB)(__FILE__, __LINE__, mu)
|
| +
|
| + /* Deprecated. Use ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX. */
|
| + #define ANNOTATE_MUTEX_IS_USED_AS_CONDVAR(mu) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateMutexIsUsedAsCondVar)(__FILE__, __LINE__, \
|
| + mu)
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations useful when defining memory allocators, or when memory that
|
| + was protected in one way starts to be protected in another. */
|
| +
|
| + /* Report that a new memory at "address" of size "size" has been allocated.
|
| + This might be used when the memory has been retrieved from a free list and
|
| + is about to be reused, or when a the locking discipline for a variable
|
| + changes. */
|
| + #define ANNOTATE_NEW_MEMORY(address, size) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateNewMemory)(__FILE__, __LINE__, address, \
|
| + size)
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations useful when defining FIFO queues that transfer data between
|
| + threads. */
|
| +
|
| + /* Report that the producer-consumer queue (such as ProducerConsumerQueue) at
|
| + address "pcq" has been created. The ANNOTATE_PCQ_* annotations
|
| + should be used only for FIFO queues. For non-FIFO queues use
|
| + ANNOTATE_HAPPENS_BEFORE (for put) and ANNOTATE_HAPPENS_AFTER (for get). */
|
| + #define ANNOTATE_PCQ_CREATE(pcq) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQCreate)(__FILE__, __LINE__, pcq)
|
| +
|
| + /* Report that the queue at address "pcq" is about to be destroyed. */
|
| + #define ANNOTATE_PCQ_DESTROY(pcq) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQDestroy)(__FILE__, __LINE__, pcq)
|
| +
|
| + /* Report that we are about to put an element into a FIFO queue at address
|
| + "pcq". */
|
| + #define ANNOTATE_PCQ_PUT(pcq) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQPut)(__FILE__, __LINE__, pcq)
|
| +
|
| + /* Report that we've just got an element from a FIFO queue at address
|
| + "pcq". */
|
| + #define ANNOTATE_PCQ_GET(pcq) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQGet)(__FILE__, __LINE__, pcq)
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations that suppress errors. It is usually better to express the
|
| + program's synchronization using the other annotations, but these can
|
| + be used when all else fails. */
|
| +
|
| + /* Report that we may have a benign race at "pointer", with size
|
| + "sizeof(*(pointer))". "pointer" must be a non-void* pointer. Insert at the
|
| + point where "pointer" has been allocated, preferably close to the point
|
| + where the race happens. See also ANNOTATE_BENIGN_RACE_STATIC. */
|
| + #define ANNOTATE_BENIGN_RACE(pointer, description) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateBenignRaceSized)(__FILE__, __LINE__, \
|
| + pointer, sizeof(*(pointer)), description)
|
| +
|
| + /* Same as ANNOTATE_BENIGN_RACE(address, description), but applies to
|
| + the memory range [address, address+size). */
|
| + #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateBenignRaceSized)(__FILE__, __LINE__, \
|
| + address, size, description)
|
| +
|
| + /* Request the analysis tool to ignore all reads in the current thread
|
| + until ANNOTATE_IGNORE_READS_END is called.
|
| + Useful to ignore intentional racey reads, while still checking
|
| + other reads and all writes.
|
| + See also ANNOTATE_UNPROTECTED_READ. */
|
| + #define ANNOTATE_IGNORE_READS_BEGIN() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreReadsBegin)(__FILE__, __LINE__)
|
| +
|
| + /* Stop ignoring reads. */
|
| + #define ANNOTATE_IGNORE_READS_END() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreReadsEnd)(__FILE__, __LINE__)
|
| +
|
| + /* Similar to ANNOTATE_IGNORE_READS_BEGIN, but ignore writes. */
|
| + #define ANNOTATE_IGNORE_WRITES_BEGIN() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreWritesBegin)(__FILE__, __LINE__)
|
| +
|
| + /* Stop ignoring writes. */
|
| + #define ANNOTATE_IGNORE_WRITES_END() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreWritesEnd)(__FILE__, __LINE__)
|
| +
|
| + /* Start ignoring all memory accesses (reads and writes). */
|
| + #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() \
|
| + do {\
|
| + ANNOTATE_IGNORE_READS_BEGIN();\
|
| + ANNOTATE_IGNORE_WRITES_BEGIN();\
|
| + }while(0)\
|
| +
|
| + /* Stop ignoring all memory accesses. */
|
| + #define ANNOTATE_IGNORE_READS_AND_WRITES_END() \
|
| + do {\
|
| + ANNOTATE_IGNORE_WRITES_END();\
|
| + ANNOTATE_IGNORE_READS_END();\
|
| + }while(0)\
|
| +
|
| + /* Similar to ANNOTATE_IGNORE_READS_BEGIN, but ignore synchronization events:
|
| + RWLOCK* and CONDVAR*. */
|
| + #define ANNOTATE_IGNORE_SYNC_BEGIN() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreSyncBegin)(__FILE__, __LINE__)
|
| +
|
| + /* Stop ignoring sync events. */
|
| + #define ANNOTATE_IGNORE_SYNC_END() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreSyncEnd)(__FILE__, __LINE__)
|
| +
|
| +
|
| + /* Enable (enable!=0) or disable (enable==0) race detection for all threads.
|
| + This annotation could be useful if you want to skip expensive race analysis
|
| + during some period of program execution, e.g. during initialization. */
|
| + #define ANNOTATE_ENABLE_RACE_DETECTION(enable) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateEnableRaceDetection)(__FILE__, __LINE__, \
|
| + enable)
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations useful for debugging. */
|
| +
|
| + /* Request to trace every access to "address". */
|
| + #define ANNOTATE_TRACE_MEMORY(address) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateTraceMemory)(__FILE__, __LINE__, address)
|
| +
|
| + /* Report the current thread name to a race detector. */
|
| + #define ANNOTATE_THREAD_NAME(name) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateThreadName)(__FILE__, __LINE__, name)
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations useful when implementing locks. They are not
|
| + normally needed by modules that merely use locks.
|
| + The "lock" argument is a pointer to the lock object. */
|
| +
|
| + /* Report that a lock has been created at address "lock". */
|
| + #define ANNOTATE_RWLOCK_CREATE(lock) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockCreate)(__FILE__, __LINE__, lock)
|
| +
|
| + /* Report that the lock at address "lock" is about to be destroyed. */
|
| + #define ANNOTATE_RWLOCK_DESTROY(lock) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockDestroy)(__FILE__, __LINE__, lock)
|
| +
|
| + /* Report that the lock at address "lock" has been acquired.
|
| + is_w=1 for writer lock, is_w=0 for reader lock. */
|
| + #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockAcquired)(__FILE__, __LINE__, lock, \
|
| + is_w)
|
| +
|
| + /* Report that the lock at address "lock" is about to be released. */
|
| + #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockReleased)(__FILE__, __LINE__, lock, \
|
| + is_w)
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations useful when implementing barriers. They are not
|
| + normally needed by modules that merely use barriers.
|
| + The "barrier" argument is a pointer to the barrier object. */
|
| +
|
| + /* Report that the "barrier" has been initialized with initial "count".
|
| + If 'reinitialization_allowed' is true, initialization is allowed to happen
|
| + multiple times w/o calling barrier_destroy() */
|
| + #define ANNOTATE_BARRIER_INIT(barrier, count, reinitialization_allowed) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierInit)(__FILE__, __LINE__, barrier, \
|
| + count, reinitialization_allowed)
|
| +
|
| + /* Report that we are about to enter barrier_wait("barrier"). */
|
| + #define ANNOTATE_BARRIER_WAIT_BEFORE(barrier) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierWaitBefore)(__FILE__, __LINE__, \
|
| + barrier)
|
| +
|
| + /* Report that we just exited barrier_wait("barrier"). */
|
| + #define ANNOTATE_BARRIER_WAIT_AFTER(barrier) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierWaitAfter)(__FILE__, __LINE__, \
|
| + barrier)
|
| +
|
| + /* Report that the "barrier" has been destroyed. */
|
| + #define ANNOTATE_BARRIER_DESTROY(barrier) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierDestroy)(__FILE__, __LINE__, \
|
| + barrier)
|
| +
|
| + /* -------------------------------------------------------------
|
| + Annotations useful for testing race detectors. */
|
| +
|
| + /* Report that we expect a race on the variable at "address".
|
| + Use only in unit tests for a race detector. */
|
| + #define ANNOTATE_EXPECT_RACE(address, description) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateExpectRace)(__FILE__, __LINE__, address, \
|
| + description)
|
| +
|
| + #define ANNOTATE_FLUSH_EXPECTED_RACES() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateFlushExpectedRaces)(__FILE__, __LINE__)
|
| +
|
| + /* A no-op. Insert where you like to test the interceptors. */
|
| + #define ANNOTATE_NO_OP(arg) \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateNoOp)(__FILE__, __LINE__, arg)
|
| +
|
| + /* Force the race detector to flush its state. The actual effect depends on
|
| + * the implementation of the detector. */
|
| + #define ANNOTATE_FLUSH_STATE() \
|
| + DYNAMIC_ANNOTATIONS_NAME(AnnotateFlushState)(__FILE__, __LINE__)
|
| +
|
| +
|
| +#else /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */
|
| +
|
| + #define ANNOTATE_RWLOCK_CREATE(lock) /* empty */
|
| + #define ANNOTATE_RWLOCK_DESTROY(lock) /* empty */
|
| + #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) /* empty */
|
| + #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) /* empty */
|
| + #define ANNOTATE_BARRIER_INIT(barrier, count, reinitialization_allowed) /* */
|
| + #define ANNOTATE_BARRIER_WAIT_BEFORE(barrier) /* empty */
|
| + #define ANNOTATE_BARRIER_WAIT_AFTER(barrier) /* empty */
|
| + #define ANNOTATE_BARRIER_DESTROY(barrier) /* empty */
|
| + #define ANNOTATE_CONDVAR_LOCK_WAIT(cv, lock) /* empty */
|
| + #define ANNOTATE_CONDVAR_WAIT(cv) /* empty */
|
| + #define ANNOTATE_CONDVAR_SIGNAL(cv) /* empty */
|
| + #define ANNOTATE_CONDVAR_SIGNAL_ALL(cv) /* empty */
|
| + #define ANNOTATE_HAPPENS_BEFORE(obj) /* empty */
|
| + #define ANNOTATE_HAPPENS_AFTER(obj) /* empty */
|
| + #define ANNOTATE_PUBLISH_MEMORY_RANGE(address, size) /* empty */
|
| + #define ANNOTATE_UNPUBLISH_MEMORY_RANGE(address, size) /* empty */
|
| + #define ANNOTATE_SWAP_MEMORY_RANGE(address, size) /* empty */
|
| + #define ANNOTATE_PCQ_CREATE(pcq) /* empty */
|
| + #define ANNOTATE_PCQ_DESTROY(pcq) /* empty */
|
| + #define ANNOTATE_PCQ_PUT(pcq) /* empty */
|
| + #define ANNOTATE_PCQ_GET(pcq) /* empty */
|
| + #define ANNOTATE_NEW_MEMORY(address, size) /* empty */
|
| + #define ANNOTATE_EXPECT_RACE(address, description) /* empty */
|
| + #define ANNOTATE_FLUSH_EXPECTED_RACES(address, description) /* empty */
|
| + #define ANNOTATE_BENIGN_RACE(address, description) /* empty */
|
| + #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) /* empty */
|
| + #define ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX(mu) /* empty */
|
| + #define ANNOTATE_MUTEX_IS_USED_AS_CONDVAR(mu) /* empty */
|
| + #define ANNOTATE_TRACE_MEMORY(arg) /* empty */
|
| + #define ANNOTATE_THREAD_NAME(name) /* empty */
|
| + #define ANNOTATE_IGNORE_READS_BEGIN() /* empty */
|
| + #define ANNOTATE_IGNORE_READS_END() /* empty */
|
| + #define ANNOTATE_IGNORE_WRITES_BEGIN() /* empty */
|
| + #define ANNOTATE_IGNORE_WRITES_END() /* empty */
|
| + #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() /* empty */
|
| + #define ANNOTATE_IGNORE_READS_AND_WRITES_END() /* empty */
|
| + #define ANNOTATE_IGNORE_SYNC_BEGIN() /* empty */
|
| + #define ANNOTATE_IGNORE_SYNC_END() /* empty */
|
| + #define ANNOTATE_ENABLE_RACE_DETECTION(enable) /* empty */
|
| + #define ANNOTATE_NO_OP(arg) /* empty */
|
| + #define ANNOTATE_FLUSH_STATE() /* empty */
|
| +
|
| +#endif /* DYNAMIC_ANNOTATIONS_ENABLED */
|
| +
|
| +/* Use the macros above rather than using these functions directly. */
|
| +#ifdef __cplusplus
|
| +extern "C" {
|
| +#endif
|
| +
|
| +
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockCreate)(
|
| + const char *file, int line,
|
| + const volatile void *lock) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockDestroy)(
|
| + const char *file, int line,
|
| + const volatile void *lock) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockAcquired)(
|
| + const char *file, int line,
|
| + const volatile void *lock, long is_w) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateRWLockReleased)(
|
| + const char *file, int line,
|
| + const volatile void *lock, long is_w) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierInit)(
|
| + const char *file, int line, const volatile void *barrier, long count,
|
| + long reinitialization_allowed) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierWaitBefore)(
|
| + const char *file, int line,
|
| + const volatile void *barrier) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierWaitAfter)(
|
| + const char *file, int line,
|
| + const volatile void *barrier) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateBarrierDestroy)(
|
| + const char *file, int line,
|
| + const volatile void *barrier) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateCondVarWait)(
|
| + const char *file, int line, const volatile void *cv,
|
| + const volatile void *lock) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateCondVarSignal)(
|
| + const char *file, int line,
|
| + const volatile void *cv) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateCondVarSignalAll)(
|
| + const char *file, int line,
|
| + const volatile void *cv) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotatePublishMemoryRange)(
|
| + const char *file, int line,
|
| + const volatile void *address, long size) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateUnpublishMemoryRange)(
|
| + const char *file, int line,
|
| + const volatile void *address, long size) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQCreate)(
|
| + const char *file, int line,
|
| + const volatile void *pcq) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQDestroy)(
|
| + const char *file, int line,
|
| + const volatile void *pcq) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQPut)(
|
| + const char *file, int line,
|
| + const volatile void *pcq) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotatePCQGet)(
|
| + const char *file, int line,
|
| + const volatile void *pcq) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateNewMemory)(
|
| + const char *file, int line,
|
| + const volatile void *mem, long size) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateExpectRace)(
|
| + const char *file, int line, const volatile void *mem,
|
| + const char *description) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateFlushExpectedRaces)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateBenignRace)(
|
| + const char *file, int line, const volatile void *mem,
|
| + const char *description) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateBenignRaceSized)(
|
| + const char *file, int line, const volatile void *mem, long size,
|
| + const char *description) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateMutexIsUsedAsCondVar)(
|
| + const char *file, int line,
|
| + const volatile void *mu) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateMutexIsNotPHB)(
|
| + const char *file, int line,
|
| + const volatile void *mu) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateTraceMemory)(
|
| + const char *file, int line,
|
| + const volatile void *arg) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateThreadName)(
|
| + const char *file, int line,
|
| + const char *name) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreReadsBegin)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreReadsEnd)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreWritesBegin)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreWritesEnd)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreSyncBegin)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateIgnoreSyncEnd)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateEnableRaceDetection)(
|
| + const char *file, int line, int enable) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateNoOp)(
|
| + const char *file, int line,
|
| + const volatile void *arg) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +void DYNAMIC_ANNOTATIONS_NAME(AnnotateFlushState)(
|
| + const char *file, int line) DYNAMIC_ANNOTATIONS_ATTRIBUTE_WEAK;
|
| +
|
| +#if DYNAMIC_ANNOTATIONS_PROVIDE_RUNNING_ON_VALGRIND == 1
|
| +/* Return non-zero value if running under valgrind.
|
| +
|
| + If "valgrind.h" is included into dynamic_annotations.c,
|
| + the regular valgrind mechanism will be used.
|
| + See http://valgrind.org/docs/manual/manual-core-adv.html about
|
| + RUNNING_ON_VALGRIND and other valgrind "client requests".
|
| + The file "valgrind.h" may be obtained by doing
|
| + svn co svn://svn.valgrind.org/valgrind/trunk/include
|
| +
|
| + If for some reason you can't use "valgrind.h" or want to fake valgrind,
|
| + there are two ways to make this function return non-zero:
|
| + - Use environment variable: export RUNNING_ON_VALGRIND=1
|
| + - Make your tool intercept the function RunningOnValgrind() and
|
| + change its return value.
|
| + */
|
| +int RunningOnValgrind(void);
|
| +#endif /* DYNAMIC_ANNOTATIONS_PROVIDE_RUNNING_ON_VALGRIND == 1 */
|
| +
|
| +#ifdef __cplusplus
|
| +}
|
| +#endif
|
| +
|
| +#if DYNAMIC_ANNOTATIONS_ENABLED != 0 && defined(__cplusplus)
|
| +
|
| + /* ANNOTATE_UNPROTECTED_READ is the preferred way to annotate racey reads.
|
| +
|
| + Instead of doing
|
| + ANNOTATE_IGNORE_READS_BEGIN();
|
| + ... = x;
|
| + ANNOTATE_IGNORE_READS_END();
|
| + one can use
|
| + ... = ANNOTATE_UNPROTECTED_READ(x); */
|
| + template <class T>
|
| + inline T ANNOTATE_UNPROTECTED_READ(const volatile T &x) {
|
| + ANNOTATE_IGNORE_READS_BEGIN();
|
| + T res = x;
|
| + ANNOTATE_IGNORE_READS_END();
|
| + return res;
|
| + }
|
| + /* Apply ANNOTATE_BENIGN_RACE_SIZED to a static variable. */
|
| + #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description) \
|
| + namespace { \
|
| + class static_var ## _annotator { \
|
| + public: \
|
| + static_var ## _annotator() { \
|
| + ANNOTATE_BENIGN_RACE_SIZED(&static_var, \
|
| + sizeof(static_var), \
|
| + # static_var ": " description); \
|
| + } \
|
| + }; \
|
| + static static_var ## _annotator the ## static_var ## _annotator;\
|
| + }
|
| +#else /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */
|
| +
|
| + #define ANNOTATE_UNPROTECTED_READ(x) (x)
|
| + #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description) /* empty */
|
| +
|
| +#endif /* DYNAMIC_ANNOTATIONS_ENABLED */
|
| +
|
| +#endif /* __DYNAMIC_ANNOTATIONS_H__ */
|
|
|
| Property changes on: third_party\libphonenumber\cpp\src\base\third_party\dynamic_annotations\dynamic_annotations.h
|
| ___________________________________________________________________
|
| Added: svn:eol-style
|
| + LF
|
|
|
|
|