Index: third_party/libphonenumber/cpp/src/base/basictypes.h |
=================================================================== |
--- third_party/libphonenumber/cpp/src/base/basictypes.h (revision 0) |
+++ third_party/libphonenumber/cpp/src/base/basictypes.h (revision 0) |
@@ -0,0 +1,364 @@ |
+// Copyright (c) 2010 The Chromium Authors. All rights reserved. |
+// Use of this source code is governed by a BSD-style license that can be |
+// found in the LICENSE file. |
+ |
+#ifndef BASE_BASICTYPES_H_ |
+#define BASE_BASICTYPES_H_ |
+#pragma once |
+ |
+#include <limits.h> // So we can set the bounds of our types |
+#include <stddef.h> // For size_t |
+#include <string.h> // for memcpy |
+ |
+#include "base/port.h" // Types that only need exist on certain systems |
+ |
+#ifndef COMPILER_MSVC |
+// stdint.h is part of C99 but MSVC doesn't have it. |
+#include <stdint.h> // For intptr_t. |
+#endif |
+ |
+typedef signed char schar; |
+typedef signed char int8; |
+typedef short int16; |
+// TODO: Remove these type guards. These are to avoid conflicts with |
+// obsolete/protypes.h in the Gecko SDK. |
+#ifndef _INT32 |
+#define _INT32 |
+typedef int int32; |
+#endif |
+ |
+// The NSPR system headers define 64-bit as |long| when possible. In order to |
+// not have typedef mismatches, we do the same on LP64. |
+#if __LP64__ |
+typedef long int64; |
+#else |
+typedef long long int64; |
+#endif |
+ |
+// NOTE: unsigned types are DANGEROUS in loops and other arithmetical |
+// places. Use the signed types unless your variable represents a bit |
+// pattern (eg a hash value) or you really need the extra bit. Do NOT |
+// use 'unsigned' to express "this value should always be positive"; |
+// use assertions for this. |
+ |
+typedef unsigned char uint8; |
+typedef unsigned short uint16; |
+// TODO: Remove these type guards. These are to avoid conflicts with |
+// obsolete/protypes.h in the Gecko SDK. |
+#ifndef _UINT32 |
+#define _UINT32 |
+typedef unsigned int uint32; |
+#endif |
+ |
+// See the comment above about NSPR and 64-bit. |
+#if __LP64__ |
+typedef unsigned long uint64; |
+#else |
+typedef unsigned long long uint64; |
+#endif |
+ |
+// A type to represent a Unicode code-point value. As of Unicode 4.0, |
+// such values require up to 21 bits. |
+// (For type-checking on pointers, make this explicitly signed, |
+// and it should always be the signed version of whatever int32 is.) |
+typedef signed int char32; |
+ |
+const uint8 kuint8max = (( uint8) 0xFF); |
+const uint16 kuint16max = ((uint16) 0xFFFF); |
+const uint32 kuint32max = ((uint32) 0xFFFFFFFF); |
+const uint64 kuint64max = ((uint64) GG_LONGLONG(0xFFFFFFFFFFFFFFFF)); |
+const int8 kint8min = (( int8) 0x80); |
+const int8 kint8max = (( int8) 0x7F); |
+const int16 kint16min = (( int16) 0x8000); |
+const int16 kint16max = (( int16) 0x7FFF); |
+const int32 kint32min = (( int32) 0x80000000); |
+const int32 kint32max = (( int32) 0x7FFFFFFF); |
+const int64 kint64min = (( int64) GG_LONGLONG(0x8000000000000000)); |
+const int64 kint64max = (( int64) GG_LONGLONG(0x7FFFFFFFFFFFFFFF)); |
+ |
+// A macro to disallow the copy constructor and operator= functions |
+// This should be used in the private: declarations for a class |
+#define DISALLOW_COPY_AND_ASSIGN(TypeName) \ |
+ TypeName(const TypeName&); \ |
+ void operator=(const TypeName&) |
+ |
+// An older, deprecated, politically incorrect name for the above. |
+// NOTE: The usage of this macro was baned from our code base, but some |
+// third_party libraries are yet using it. |
+// TODO(tfarina): Figure out how to fix the usage of this macro in the |
+// third_party libraries and get rid of it. |
+#define DISALLOW_EVIL_CONSTRUCTORS(TypeName) DISALLOW_COPY_AND_ASSIGN(TypeName) |
+ |
+// A macro to disallow all the implicit constructors, namely the |
+// default constructor, copy constructor and operator= functions. |
+// |
+// This should be used in the private: declarations for a class |
+// that wants to prevent anyone from instantiating it. This is |
+// especially useful for classes containing only static methods. |
+#define DISALLOW_IMPLICIT_CONSTRUCTORS(TypeName) \ |
+ TypeName(); \ |
+ DISALLOW_COPY_AND_ASSIGN(TypeName) |
+ |
+// The arraysize(arr) macro returns the # of elements in an array arr. |
+// The expression is a compile-time constant, and therefore can be |
+// used in defining new arrays, for example. If you use arraysize on |
+// a pointer by mistake, you will get a compile-time error. |
+// |
+// One caveat is that arraysize() doesn't accept any array of an |
+// anonymous type or a type defined inside a function. In these rare |
+// cases, you have to use the unsafe ARRAYSIZE_UNSAFE() macro below. This is |
+// due to a limitation in C++'s template system. The limitation might |
+// eventually be removed, but it hasn't happened yet. |
+ |
+// This template function declaration is used in defining arraysize. |
+// Note that the function doesn't need an implementation, as we only |
+// use its type. |
+template <typename T, size_t N> |
+char (&ArraySizeHelper(T (&array)[N]))[N]; |
+ |
+// That gcc wants both of these prototypes seems mysterious. VC, for |
+// its part, can't decide which to use (another mystery). Matching of |
+// template overloads: the final frontier. |
+#ifndef _MSC_VER |
+template <typename T, size_t N> |
+char (&ArraySizeHelper(const T (&array)[N]))[N]; |
+#endif |
+ |
+#define arraysize(array) (sizeof(ArraySizeHelper(array))) |
+ |
+// ARRAYSIZE_UNSAFE performs essentially the same calculation as arraysize, |
+// but can be used on anonymous types or types defined inside |
+// functions. It's less safe than arraysize as it accepts some |
+// (although not all) pointers. Therefore, you should use arraysize |
+// whenever possible. |
+// |
+// The expression ARRAYSIZE_UNSAFE(a) is a compile-time constant of type |
+// size_t. |
+// |
+// ARRAYSIZE_UNSAFE catches a few type errors. If you see a compiler error |
+// |
+// "warning: division by zero in ..." |
+// |
+// when using ARRAYSIZE_UNSAFE, you are (wrongfully) giving it a pointer. |
+// You should only use ARRAYSIZE_UNSAFE on statically allocated arrays. |
+// |
+// The following comments are on the implementation details, and can |
+// be ignored by the users. |
+// |
+// ARRAYSIZE_UNSAFE(arr) works by inspecting sizeof(arr) (the # of bytes in |
+// the array) and sizeof(*(arr)) (the # of bytes in one array |
+// element). If the former is divisible by the latter, perhaps arr is |
+// indeed an array, in which case the division result is the # of |
+// elements in the array. Otherwise, arr cannot possibly be an array, |
+// and we generate a compiler error to prevent the code from |
+// compiling. |
+// |
+// Since the size of bool is implementation-defined, we need to cast |
+// !(sizeof(a) & sizeof(*(a))) to size_t in order to ensure the final |
+// result has type size_t. |
+// |
+// This macro is not perfect as it wrongfully accepts certain |
+// pointers, namely where the pointer size is divisible by the pointee |
+// size. Since all our code has to go through a 32-bit compiler, |
+// where a pointer is 4 bytes, this means all pointers to a type whose |
+// size is 3 or greater than 4 will be (righteously) rejected. |
+ |
+#define ARRAYSIZE_UNSAFE(a) \ |
+ ((sizeof(a) / sizeof(*(a))) / \ |
+ static_cast<size_t>(!(sizeof(a) % sizeof(*(a))))) |
+ |
+ |
+// Use implicit_cast as a safe version of static_cast or const_cast |
+// for upcasting in the type hierarchy (i.e. casting a pointer to Foo |
+// to a pointer to SuperclassOfFoo or casting a pointer to Foo to |
+// a const pointer to Foo). |
+// When you use implicit_cast, the compiler checks that the cast is safe. |
+// Such explicit implicit_casts are necessary in surprisingly many |
+// situations where C++ demands an exact type match instead of an |
+// argument type convertable to a target type. |
+// |
+// The From type can be inferred, so the preferred syntax for using |
+// implicit_cast is the same as for static_cast etc.: |
+// |
+// implicit_cast<ToType>(expr) |
+// |
+// implicit_cast would have been part of the C++ standard library, |
+// but the proposal was submitted too late. It will probably make |
+// its way into the language in the future. |
+template<typename To, typename From> |
+inline To implicit_cast(From const &f) { |
+ return f; |
+} |
+ |
+// The COMPILE_ASSERT macro can be used to verify that a compile time |
+// expression is true. For example, you could use it to verify the |
+// size of a static array: |
+// |
+// COMPILE_ASSERT(ARRAYSIZE_UNSAFE(content_type_names) == CONTENT_NUM_TYPES, |
+// content_type_names_incorrect_size); |
+// |
+// or to make sure a struct is smaller than a certain size: |
+// |
+// COMPILE_ASSERT(sizeof(foo) < 128, foo_too_large); |
+// |
+// The second argument to the macro is the name of the variable. If |
+// the expression is false, most compilers will issue a warning/error |
+// containing the name of the variable. |
+ |
+template <bool> |
+struct CompileAssert { |
+}; |
+ |
+#undef COMPILE_ASSERT |
+#define COMPILE_ASSERT(expr, msg) \ |
+ typedef CompileAssert<(bool(expr))> msg[bool(expr) ? 1 : -1] |
+ |
+// Implementation details of COMPILE_ASSERT: |
+// |
+// - COMPILE_ASSERT works by defining an array type that has -1 |
+// elements (and thus is invalid) when the expression is false. |
+// |
+// - The simpler definition |
+// |
+// #define COMPILE_ASSERT(expr, msg) typedef char msg[(expr) ? 1 : -1] |
+// |
+// does not work, as gcc supports variable-length arrays whose sizes |
+// are determined at run-time (this is gcc's extension and not part |
+// of the C++ standard). As a result, gcc fails to reject the |
+// following code with the simple definition: |
+// |
+// int foo; |
+// COMPILE_ASSERT(foo, msg); // not supposed to compile as foo is |
+// // not a compile-time constant. |
+// |
+// - By using the type CompileAssert<(bool(expr))>, we ensures that |
+// expr is a compile-time constant. (Template arguments must be |
+// determined at compile-time.) |
+// |
+// - The outter parentheses in CompileAssert<(bool(expr))> are necessary |
+// to work around a bug in gcc 3.4.4 and 4.0.1. If we had written |
+// |
+// CompileAssert<bool(expr)> |
+// |
+// instead, these compilers will refuse to compile |
+// |
+// COMPILE_ASSERT(5 > 0, some_message); |
+// |
+// (They seem to think the ">" in "5 > 0" marks the end of the |
+// template argument list.) |
+// |
+// - The array size is (bool(expr) ? 1 : -1), instead of simply |
+// |
+// ((expr) ? 1 : -1). |
+// |
+// This is to avoid running into a bug in MS VC 7.1, which |
+// causes ((0.0) ? 1 : -1) to incorrectly evaluate to 1. |
+ |
+ |
+// MetatagId refers to metatag-id that we assign to |
+// each metatag <name, value> pair.. |
+typedef uint32 MetatagId; |
+ |
+// Argument type used in interfaces that can optionally take ownership |
+// of a passed in argument. If TAKE_OWNERSHIP is passed, the called |
+// object takes ownership of the argument. Otherwise it does not. |
+enum Ownership { |
+ DO_NOT_TAKE_OWNERSHIP, |
+ TAKE_OWNERSHIP |
+}; |
+ |
+// bit_cast<Dest,Source> is a template function that implements the |
+// equivalent of "*reinterpret_cast<Dest*>(&source)". We need this in |
+// very low-level functions like the protobuf library and fast math |
+// support. |
+// |
+// float f = 3.14159265358979; |
+// int i = bit_cast<int32>(f); |
+// // i = 0x40490fdb |
+// |
+// The classical address-casting method is: |
+// |
+// // WRONG |
+// float f = 3.14159265358979; // WRONG |
+// int i = * reinterpret_cast<int*>(&f); // WRONG |
+// |
+// The address-casting method actually produces undefined behavior |
+// according to ISO C++ specification section 3.10 -15 -. Roughly, this |
+// section says: if an object in memory has one type, and a program |
+// accesses it with a different type, then the result is undefined |
+// behavior for most values of "different type". |
+// |
+// This is true for any cast syntax, either *(int*)&f or |
+// *reinterpret_cast<int*>(&f). And it is particularly true for |
+// conversions betweeen integral lvalues and floating-point lvalues. |
+// |
+// The purpose of 3.10 -15- is to allow optimizing compilers to assume |
+// that expressions with different types refer to different memory. gcc |
+// 4.0.1 has an optimizer that takes advantage of this. So a |
+// non-conforming program quietly produces wildly incorrect output. |
+// |
+// The problem is not the use of reinterpret_cast. The problem is type |
+// punning: holding an object in memory of one type and reading its bits |
+// back using a different type. |
+// |
+// The C++ standard is more subtle and complex than this, but that |
+// is the basic idea. |
+// |
+// Anyways ... |
+// |
+// bit_cast<> calls memcpy() which is blessed by the standard, |
+// especially by the example in section 3.9 . Also, of course, |
+// bit_cast<> wraps up the nasty logic in one place. |
+// |
+// Fortunately memcpy() is very fast. In optimized mode, with a |
+// constant size, gcc 2.95.3, gcc 4.0.1, and msvc 7.1 produce inline |
+// code with the minimal amount of data movement. On a 32-bit system, |
+// memcpy(d,s,4) compiles to one load and one store, and memcpy(d,s,8) |
+// compiles to two loads and two stores. |
+// |
+// I tested this code with gcc 2.95.3, gcc 4.0.1, icc 8.1, and msvc 7.1. |
+// |
+// WARNING: if Dest or Source is a non-POD type, the result of the memcpy |
+// is likely to surprise you. |
+ |
+template <class Dest, class Source> |
+inline Dest bit_cast(const Source& source) { |
+ // Compile time assertion: sizeof(Dest) == sizeof(Source) |
+ // A compile error here means your Dest and Source have different sizes. |
+ typedef char VerifySizesAreEqual [sizeof(Dest) == sizeof(Source) ? 1 : -1]; |
+ |
+ Dest dest; |
+ memcpy(&dest, &source, sizeof(dest)); |
+ return dest; |
+} |
+ |
+// Used to explicitly mark the return value of a function as unused. If you are |
+// really sure you don't want to do anything with the return value of a function |
+// that has been marked WARN_UNUSED_RESULT, wrap it with this. Example: |
+// |
+// scoped_ptr<MyType> my_var = ...; |
+// if (TakeOwnership(my_var.get()) == SUCCESS) |
+// ignore_result(my_var.release()); |
+// |
+template<typename T> |
+inline void ignore_result(const T& ignored) { |
+} |
+ |
+// The following enum should be used only as a constructor argument to indicate |
+// that the variable has static storage class, and that the constructor should |
+// do nothing to its state. It indicates to the reader that it is legal to |
+// declare a static instance of the class, provided the constructor is given |
+// the base::LINKER_INITIALIZED argument. Normally, it is unsafe to declare a |
+// static variable that has a constructor or a destructor because invocation |
+// order is undefined. However, IF the type can be initialized by filling with |
+// zeroes (which the loader does for static variables), AND the destructor also |
+// does nothing to the storage, AND there are no virtual methods, then a |
+// constructor declared as |
+// explicit MyClass(base::LinkerInitialized x) {} |
+// and invoked as |
+// static MyClass my_variable_name(base::LINKER_INITIALIZED); |
+namespace base { |
+enum LinkerInitialized { LINKER_INITIALIZED }; |
+} // base |
+ |
+#endif // BASE_BASICTYPES_H_ |
Property changes on: third_party\libphonenumber\cpp\src\base\basictypes.h |
___________________________________________________________________ |
Added: svn:eol-style |
+ LF |