Remove ChromeOS specific configs from the U-Boot repository.

include/configs/chromeos/tegra2/developer.h

Index: include/configs/chromeos/tegra2/developer.h
diff --git a/include/configs/chromeos/tegra2/developer.h b/include/configs/chromeos/tegra2/developer.h
deleted file mode 100644
index becb47a5df29bee66a83315a08c68f0937b30e3d..0000000000000000000000000000000000000000
--- a/include/configs/chromeos/tegra2/developer.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#ifndef __configs_chromeos_tegra2_developer_h__
-#define __configs_chromeos_tegra2_developer_h__
-
-#include <configs/chromeos/developer.h>
-#include <configs/chromeos/tegra2/common.h>
-
-#include <configs/chromeos/tegra2/parts/nand.h>
-#include <configs/chromeos/tegra2/parts/usb.h>
-
-/*
- * We expect all Tegra2 machines to have SPI flash as defined by the
- * firmware_layout.h config file. The environment will go there.
- */
-#define CONFIG_ENV_IS_IN_SPI_FLASH 1
-
-#define CONFIG_ENV_SECT_SIZE    CONFIG_LENGTH_ENV
-#define CONFIG_ENV_OFFSET       CONFIG_OFFSET_ENV
-
-/* Override the environment size, since we only need a small area */
-#undef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE         CONFIG_LENGTH_ENV
-
-#define CONFIG_SYS_MEMTEST_START       0x0000
-#define CONFIG_SYS_MEMTEST_END         0x1000
-
-/*
- * Developer-friendly booting options:
- *
- * dhcp_boot: get IP address from DHCP, then boot with NFS root.
- * keynfs_boot: get kernel from USB stick ext2 partition 1, then NFS root.
- * usb_boot: boot from a USB image made with image_to_usb.sh.
- * mmc_boot: boot from an image installed in eMMC,
- *
- * regen_all sets up the bootargs, so must be run after any change to
- * environment variables.
- *
- * The network adapter must be available before starting an dhcp_boot. You
- * may need to use 'usb start' first if you are using a USB ethernet adapter.
- * The same applies for usb_boot.
- */
-
-#define CONFIG_EXTRA_ENV_SETTINGS_ARCH \
-	"console=ttyS0,115200n8\0"\
-	"cros_bootfile=/boot/vmlinux.uimg\0"\
-	"user=user\0"\
-	"board=arm\0"\
-	"serial#=1\0"\
-	"tftppath=/tftpboot/uImage\0"\
-	"tftpserverip=10.0.0.1\0"\
-	"nfsserverip=10.0.0.1\0"\
-	"mmcdev=0\0"\
-	"regen_all="\
-		"setenv common_bootargs console=${console} "\
-		"${platform_extras} noinitrd; "\
-		"setenv bootargs ${common_bootargs} ${extra_bootargs} "\
-		"${bootdev_bootargs}\0"\
-	"regen_net_bootargs=setenv bootdev_bootargs "\
-			"dev=/dev/nfs4 rw nfsroot=${nfsserverip}:${rootpath} "\
-			"ip=dhcp; "\
-		"run regen_all\0"\
-	\
-	"dhcp_setup=setenv tftppath "\
-			"/tftpboot/uImage-${user}-${board}-${serial#}; "\
-		"setenv rootpath " CONFIG_ROOTPATH "; "\
-		"setenv autoload n; "\
-		"run regen_net_bootargs\0"\
-	"dhcp_boot=run dhcp_setup; "\
-		"bootp; tftpboot ${loadaddr} ${tftpserverip}:${tftppath}; "\
-		"bootm ${loadaddr}\0"\
-	\
-	"keynfs_setup="\
-		"setenv rootpath " CONFIG_ROOTPATH "; "\
-		"run regen_net_bootargs\0" \
-	"keynfs_boot=run keynfs_setup; "\
-		"ext2load usb 0:1 ${loadaddr} uImage; "\
-		"bootm ${loadaddr}\0" \
-	\
-	"usb_setup=setenv bootdev_bootargs "\
-		"root=/dev/sda3 rootwait; "\
-		"run regen_all\0"\
-	"usb_boot=run usb_setup; "\
-		"ext2load usb 0:3 ${loadaddr} ${cros_bootfile}; "\
-		"bootm ${loadaddr}\0" \
-	\
-	"mmc_setup=mmc init ${mmcdev}; setenv bootdev_bootargs "\
-		"root=/dev/mmcblk0p3 rootwait; "\
-		"run regen_all\0"\
-	"mmc_boot=run mmc_setup; "\
-		"ext2load mmc ${mmcdev}:3 ${loadaddr} ${cros_bootfile}; "\
-		"bootm ${loadaddr}\0"
-
-/*
- * Our developer-friendly boot process tries a number of things in sequence
- * until it finds a kernel. Network booting is tried first if we have Ethernet.
- */
-#define CONFIG_BOOTCOMMAND \
-  "usb start; "\
-  "if test ${ethact} != \"\"; then "\
-    "run dhcp_boot ; " \
-  "fi ; " \
-  "run keynfs_boot ; " \
-  "run usb_boot ; " \
-  "run mmc_boot"
-
-#endif //__configs_chromeos_tegra2_developer_h__