Chromium: arm: tegra: Add NAND support

board/tegra2/common/nand/tegra2_nand.c

Index: board/tegra2/common/nand/tegra2_nand.c
diff --git a/board/tegra2/common/nand/tegra2_nand.c b/board/tegra2/common/nand/tegra2_nand.c
new file mode 100644
index 0000000000000000000000000000000000000000..dcb5ce86a42ef3ba9530eda56bab0697e86068c7
--- /dev/null
+++ b/board/tegra2/common/nand/tegra2_nand.c
@@ -0,0 +1,441 @@
+/*

[robotboy, 2011/03/21 16:50:12]

And please remove this file as well.

+ * (C) Copyright 2006 Detlev Zundel, dzu@denx.de
+ * (C) Copyright 2006 DENX Software Engineering
+ * (C) Copyright 2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/nvcommon.h>
+#include "../board.h"
+#include "tegra2_nand.h"
+
+#define NAND_PIO_CMD_TIMEOUT_MS	10
+#ifndef CONFIG_NAND_CLK_DIVISOR_DDDDDDDH
+ /* Set clock divisor
+  * 7 bits of D and 1 bit of H
+  * divisor= (DDDDDDD + 1) + (H x 0.5)
+  * clock = original clock / divisor
+  * 6 means /4  */
+ #define CONFIG_NAND_CLK_DIVISOR_DDDDDDDH	6
+#endif
+static int byte_count;
+
+static struct nand_ecclayout nand_soft_eccoob = {
+	.oobfree = {
+		{.offset = 40, .length = 24 }}
+};
+
+/**
+ * tegra2_nand_read_byte - [DEFAULT] read one byte from the chip
+ * @mtd:	MTD device structure
+ *
+ * Default read function for 8bit bus-width
+ */
+static uint8_t tegra2_nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	int dword_read;
+
+	dword_read = readl(chip->IO_ADDR_R + NAND_RESP_0);
+	dword_read = dword_read >> (8 * byte_count);
+	byte_count ++;
+	return (uint8_t) dword_read;
+}
+
+/**
+ * tegra2_nand_write_buf - [DEFAULT] write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ *
+ * Default write function for 8bit bus-width
+ */
+static void tegra2_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+	int len)
+{
+	int i, j, l, l2;
+	struct nand_chip *chip = mtd->priv;
+
+	for (i = 0; i < len/4; i++)
+	{
+		l = ((int *)buf)[i];
+		writel(l, chip->IO_ADDR_W+ NAND_RESP_0);
+		writel(NAND_CMD_GO+ NAND_CMD_PIO+ NAND_CMD_TX+
+			(NAND_CMD_TRANS_SIZE_BYTES4<<NAND_CMD_TRANS_SIZE_SHIFT)
+			+ NAND_CMD_A_VALID+ NAND_CMD_CE0,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+
+		if (!tegra2_nand_waitfor_cmd_completion(mtd))
+			printf("Command timeout during write_buf\n");
+	}
+	if ((len % 4) != 0)
+	{
+		l = 0;
+		for (j=0; j<(len %4); j++)
+		{
+			l2 = (int) buf[i*4+j];
+			l |= (l2<< (8*j));
+		}
+		writel(l, chip->IO_ADDR_W+ NAND_RESP_0);
+		writel(NAND_CMD_GO+ NAND_CMD_PIO+NAND_CMD_TX+
+			(((len % 4)-1)<<NAND_CMD_TRANS_SIZE_SHIFT)+
+			NAND_CMD_A_VALID+ NAND_CMD_CE0,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+		if (!tegra2_nand_waitfor_cmd_completion(mtd))
+			printf("Command timeout during write_buf\n");
+	}
+}
+
+/**
+ * tegra2_nand_read_buf - [DEFAULT] read chip data into buffer
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ *
+ * Default read function for 8bit bus-width
+ */
+static void tegra2_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i, j, l;
+	struct nand_chip *chip = mtd->priv;
+	int *buf_dword;
+
+	buf_dword = (int *) buf;
+	for (i = 0; i < len/4; i++)
+	{
+		writel(NAND_CMD_GO+ NAND_CMD_PIO+ NAND_CMD_RX+
+			(NAND_CMD_TRANS_SIZE_BYTES4<<NAND_CMD_TRANS_SIZE_SHIFT)
+			+ NAND_CMD_A_VALID+ NAND_CMD_CE0,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+		if (!tegra2_nand_waitfor_cmd_completion(mtd))
+			printf("Command timeout during read_buf\n");
+		l = readl(chip->IO_ADDR_R+ NAND_RESP_0);
+		buf_dword[i] = l;
+	}
+	if ((len % 4) != 0)
+	{
+		writel(NAND_CMD_GO+ NAND_CMD_PIO+NAND_CMD_RX+
+			(((len % 4)-1)<<NAND_CMD_TRANS_SIZE_SHIFT)+
+			NAND_CMD_A_VALID+ NAND_CMD_CE0,
+			chip->IO_ADDR_W + NAND_COMMAND_0);
+		if (!tegra2_nand_waitfor_cmd_completion(mtd))
+			printf("Command timeout during read_buf\n");
+		l = readl(chip->IO_ADDR_R+ NAND_RESP_0);
+		for (j=0; j<(len %4); j++)
+		{
+			buf[i*4+j] = (char) (l>>(8*j));
+		}
+	}
+}
+
+/*
+ * = 1 - Command completed
+ *   0 - Timeout
+ */
+static int tegra2_nand_waitfor_cmd_completion(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	int	i;
+
+	for (i=0; i< NAND_PIO_CMD_TIMEOUT_MS * 1000; i++)
+	{
+		if (!(readl(this->IO_ADDR_R + NAND_CMD_REG1_0) & NAND_CMD_GO))
+		{
+			if (readl(this->IO_ADDR_R + NAND_STATUS_0) &
+				NAND_STATUS_RBSY0)
+				break;
+		}
+		udelay(1);
+	}
+	if (i== NAND_PIO_CMD_TIMEOUT_MS * 1000)
+		return 0;
+	return 1;
+}
+
+/*
+ * = 1 - ready
+ *   0 - not ready
+ */
+static int tegra2_nand_dev_ready(struct mtd_info *mtd)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int	RegVal;
+
+	RegVal= readl(chip->IO_ADDR_R + NAND_STATUS_0);
+	if (RegVal & NAND_STATUS_RBSY0)
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ *	hardware specific access to control-lines
+ */
+static void tegra2_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+	unsigned int ctrl)
+{
+}
+
+/**
+ * tegra2_nand_command - [DEFAULT] Send command to NAND device
+ * @mtd:	MTD device structure
+ * @command:	the command to be sent
+ * @column:	the column address for this command, -1 if none
+ * @page_addr:	the page address for this command, -1 if none
+ */
+static void tegra2_nand_command(struct mtd_info *mtd, unsigned int command,
+			 int column, int page_addr)
+{
+	register struct nand_chip *chip = mtd->priv;
+
+	/*
+	 * Write out the command to the device.
+	 */
+	if (mtd->writesize < 2048) {
+		/* Only command NAND_CMD_RESET or NAND_CMD_READID will come
+		 * here before mtd->writesize is initialized, we don't have
+		 * any action here because page size of NAND HY27UF084G2B
+		 * is 2048 bytes and mtd->writesize will be 2048 after
+		 * initialized. */
+	}
+	else
+	{
+		/* Emulate NAND_CMD_READOOB */
+		if (command == NAND_CMD_READOOB)
+		{
+			column += mtd->writesize;
+			command = NAND_CMD_READ0;
+		}
+
+		if (column != -1 || page_addr != -1)
+		{
+			/* Serially input address */
+			if (column != -1)
+			{
+				/* Adjust columns for 16 bit buswidth */
+				if (chip->options & NAND_BUSWIDTH_16)
+					column >>= 1;
+			}
+		}
+	}
+
+	/*
+	 * program and erase have their own busy handlers
+	 * status and sequential in needs no delay
+	 */
+	switch (command) {
+	case NAND_CMD_READID:
+		writel(NAND_CMD_READID, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_GO+ NAND_CMD_CLE+ NAND_CMD_ALE+ NAND_CMD_PIO+
+			NAND_CMD_RX+
+			(NAND_CMD_TRANS_SIZE_BYTES4<<NAND_CMD_TRANS_SIZE_SHIFT)
+			+ NAND_CMD_CE0,
+			chip->IO_ADDR_W + NAND_COMMAND_0);
+		byte_count = 0;
+		break;
+	case NAND_CMD_READ0:
+		writel(NAND_CMD_READ0, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_READSTART, chip->IO_ADDR_W + NAND_CMD_REG2_0);
+		writel((page_addr <<16)+ (column & 0xFFFF),
+			chip->IO_ADDR_W+ NAND_ADDR_REG1_0);
+		writel(page_addr >>16, chip->IO_ADDR_W + NAND_ADDR_REG2_0);
+		writel(NAND_CMD_GO+ NAND_CMD_CLE+ NAND_CMD_ALE+ NAND_CMD_PIO+
+			NAND_CMD_SEC_CMD+ NAND_CMD_CE0+ NAND_CMD_ALE_BYTES5,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+		byte_count = 0;
+		break;
+	case NAND_CMD_SEQIN:
+		writel(NAND_CMD_SEQIN, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_PAGEPROG, chip->IO_ADDR_W + NAND_CMD_REG2_0);
+		writel((page_addr <<16)+ (column & 0xFFFF),
+			chip->IO_ADDR_W+ NAND_ADDR_REG1_0);
+		writel(page_addr >>16, chip->IO_ADDR_W + NAND_ADDR_REG2_0);
+		writel(NAND_CMD_GO+ NAND_CMD_CLE+ NAND_CMD_ALE+ NAND_CMD_PIO+
+			NAND_CMD_SEC_CMD+ NAND_CMD_AFT_DAT+ NAND_CMD_CE0+
+			NAND_CMD_ALE_BYTES5,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+		break;
+	case NAND_CMD_PAGEPROG:
+		writel(NAND_CMD_PAGEPROG, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_GO+NAND_CMD_CLE+NAND_CMD_CE0,
+			chip->IO_ADDR_W + NAND_COMMAND_0);
+		break;
+	case NAND_CMD_ERASE1:
+		writel(NAND_CMD_ERASE1, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_ERASE2, chip->IO_ADDR_W + NAND_CMD_REG2_0);
+		writel(page_addr, chip->IO_ADDR_W + NAND_ADDR_REG1_0);
+		writel(NAND_CMD_GO+ NAND_CMD_CLE+ NAND_CMD_ALE+
+			NAND_CMD_SEC_CMD+ NAND_CMD_CE0+ NAND_CMD_ALE_BYTES3,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+		break;
+	case NAND_CMD_RNDOUT:
+		writel(NAND_CMD_RNDOUT, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_RNDOUTSTART, chip->IO_ADDR_W + NAND_CMD_REG2_0);
+		writel((column & 0xFFFF), chip->IO_ADDR_W + NAND_ADDR_REG1_0);
+		writel(NAND_CMD_GO+ NAND_CMD_CLE+ NAND_CMD_ALE+ NAND_CMD_PIO+
+			NAND_CMD_SEC_CMD+ NAND_CMD_CE0+ NAND_CMD_ALE_BYTES2,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+		break;
+	case NAND_CMD_ERASE2:
+		return;
+	case NAND_CMD_STATUS:
+		writel(NAND_CMD_STATUS, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_GO+ NAND_CMD_CLE+ NAND_CMD_PIO+ NAND_CMD_RX+
+			(NAND_CMD_TRANS_SIZE_BYTES1<<NAND_CMD_TRANS_SIZE_SHIFT)
+			+NAND_CMD_CE0,
+			chip->IO_ADDR_W+ NAND_COMMAND_0);
+		byte_count = 0;
+		break;
+
+	case NAND_CMD_RESET:
+		writel(NAND_CMD_RESET, chip->IO_ADDR_W + NAND_CMD_REG1_0);
+		writel(NAND_CMD_GO+NAND_CMD_CLE+NAND_CMD_CE0,
+			chip->IO_ADDR_W + NAND_COMMAND_0);
+		break;
+	default:
+		/*
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		 */
+		if (!chip->dev_ready)
+		{
+			udelay(chip->chip_delay);
+			return;
+		}
+	}
+	if (!tegra2_nand_waitfor_cmd_completion(mtd))
+		printf("Command 0x%02X timeout\n", command);
+}
+
+/*
+ * Board-specific NAND initialization. The following members of the
+ * argument are board-specific (per include/linux/mtd/nand.h):
+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
+ * - cmd_ctrl: hardwarespecific function for accesing control-lines
+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
+ *   only be provided if a hardware ECC is available
+ * - eccm.ode: mode of ecc, see defines
+ * - chip_delay: chip dependent delay for transfering data from array to
+ *   read regs (tR)
+ * - options: various chip options. They can partly be set to inform
+ *   nand_scan about special functionality. See the defines for further
+ *   explanation
+ * Members with a "?" were not set in the merged testing-NAND branch,
+ * so they are not set here either.
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+	int	RegVal;
+
+	/* Assert RESET to NAND controller */
+	RegVal = readl(NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_RST_DEVICES_L_0);
+	RegVal |= (1 <<
+		CLK_RST_CONTROLLER_RST_DEVICES_L_0_SWR_NDFLASH_RST_SHIFT);
+	writel(RegVal, NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_RST_DEVICES_L_0);
+
+	/* enable clock to NAND controller */
+	RegVal = readl(NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_CLK_OUT_ENB_L_0);
+	RegVal |= (1 <<
+		CLK_RST_CONTROLLER_CLK_OUT_ENB_L_0_CLK_ENB_NDFLASH_SHIFT);
+	writel(RegVal, NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_CLK_OUT_ENB_L_0);
+
+	RegVal = readl(NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0);
+	RegVal &=
+	~CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0_NDFLASH_CLK_DIVISOR_MASK;
+	RegVal |= CONFIG_NAND_CLK_DIVISOR_DDDDDDDH;
+	writel(RegVal, NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0);
+	udelay(1);
+
+	/* Set clock source as PLLP_OUT0 */
+	RegVal = readl(NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0);
+	RegVal &= ~(
+	CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0_NDFLASH_CLK_SRC_MASK <<
+	CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0_NDFLASH_CLK_SRC_SHIFT);
+	RegVal |=
+	CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0_NDFLASH_CLK_SRC_PLLP_OUT0;
+	writel(RegVal, NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_CLK_SOURCE_NDFLASH_0);
+	udelay(2);
+
+	/* Deassert RESET to NAND controller */
+	RegVal = readl(NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_RST_DEVICES_L_0);
+	RegVal &= ~(1 <<
+	CLK_RST_CONTROLLER_RST_DEVICES_L_0_SWR_NDFLASH_RST_SHIFT);
+	writel(RegVal, NV_ADDRESS_MAP_CLK_RST_BASE +
+		CLK_RST_CONTROLLER_RST_DEVICES_L_0);
+
+	/* pinmux ATC_SEL uses NAND */
+	RegVal = readl(NV_ADDRESS_MAP_APB_MISC_BASE +
+		APB_MISC_PP_PIN_MUX_CTL_A_0);
+	RegVal &= ~(APB_MISC_PP_PIN_MUX_CTL_A_0_ATC_SEL_DEFAULT_MASK
+		<< APB_MISC_PP_PIN_MUX_CTL_A_0_ATC_SEL_SHIFT);
+	RegVal |= (APB_MISC_PP_PIN_MUX_CTL_A_0_ATC_SEL_NAND
+		<< APB_MISC_PP_PIN_MUX_CTL_A_0_ATC_SEL_SHIFT);
+	writel(RegVal, NV_ADDRESS_MAP_APB_MISC_BASE +
+		APB_MISC_PP_PIN_MUX_CTL_A_0);
+
+	RegVal = NAND_CONFIG_BUS_WIDTH_8BIT + NAND_CONFIG_PAGE_SIZE_2048;
+	writel(RegVal, NAND_BASE + NAND_CONFIG_0);
+
+	/* Frequence output of PLLP_OUT0 is set by BOOTROM to 216MHz
+	 * to CLK_RST_CONTROLLER_PLLP_BASE_0,
+	 * 216MHz / divisor 4 = 54MHZ
+	 * 1 clock = 18.5 ns */
+	/* Set timing for NAND device, defined in tegra2_nand.h.
+	 * If not defined, then use timing that was set by BOOTROM. */
+#ifdef CONFIG_TEGRA2_NAND_TIMING
+	writel(CONFIG_TEGRA2_NAND_TIMING, NAND_BASE + NAND_TIMING_0);
+#endif
+#ifdef CONFIG_TEGRA2_NAND_TIMING2
+	writel(CONFIG_TEGRA2_NAND_TIMING2, NAND_BASE + NAND_TIMING2_0);
+#endif
+#if (LINUX_MACH_TYPE == MACH_TYPE_SEABOARD)
+	/* GPIO port H bit 3, H.03, GMI_AD11->MFG_MODE_R, */
+	tg2_gpio_direction_output(7, 3, 1);
+#endif
+#if (LINUX_MACH_TYPE == MACH_TYPE_HARMONY)
+	/* GPIO port C bit 7, C.07, GMI_WP->NAND_WP */
+	tg2_gpio_direction_output(2, 7, 1);
+#endif
+	nand->cmd_ctrl = tegra2_nand_hwcontrol;
+	nand->dev_ready  = tegra2_nand_dev_ready;
+	nand->ecc.mode = NAND_ECC_NONE;
+	nand->ecc.layout = &nand_soft_eccoob;
+	nand->options = LP_OPTIONS;
+	nand->cmdfunc = tegra2_nand_command;
+	nand->read_byte = tegra2_nand_read_byte;
+	nand->read_buf = tegra2_nand_read_buf;
+	nand->write_buf = tegra2_nand_write_buf;
+	return 0;
+}