Add four main boot methods to developer build

include/configs/chromeos/tegra2/developer.h

Index: include/configs/chromeos/tegra2/developer.h
diff --git a/include/configs/chromeos/tegra2/developer.h b/include/configs/chromeos/tegra2/developer.h
index 21f6b8457a892cb61d1e2be6357549ceba75d035..435e9c31d1e4dc25dc04b69ae9435e3e274b51cd 100644
--- a/include/configs/chromeos/tegra2/developer.h
+++ b/include/configs/chromeos/tegra2/developer.h
@@ -24,4 +24,72 @@
 #define CONFIG_SYS_MEMTEST_START       0x0000
 #define CONFIG_SYS_MEMTEST_END         0x1000
 
+
+/*
+ * Developer-friendly booting options:
+ *
+ * dhcp_boot: get IP address from DHCP, then boot with NFS root.
+ * keynfs_boot: get kernel from USB stick ext2 partition 1, then NFS root.
+ * usb_boot: boot from a USB image made with image_to_usb.sh.
+ * mmc_boot: boot from an image installed in eMMC,
+ *
+ * regen_all sets up the bootargs, so must be run after any change to
+ * environment variables.
+ *
+ * The network adapter must be available before starting an dhcp_boot. You
+ * may need to use 'usb start' first if you are using a USB ethernet adapter.
+ * The same applies for usb_boot.
+ */
+
+#define CONFIG_EXTRA_ENV_SETTINGS_ARCH \
+	"console=ttyS0,115200n8\0"\
+	"cros_bootfile=/boot/vmlinux.uimg\0"\
+	"user=user\0"\
+	"board=arm\0"\
+	"serial#=1\0"\
+	"tftppath=/tftpboot/uImage\0"\
+	"tftpserverip=10.0.0.1\0"\
+	"nfsserverip=10.0.0.1\0"\
+	"mmcdev=0\0"\
+	"regen_all="\
+		"setenv common_bootargs console=${console} "\
+		"${platform_extras} noinitrd; "\
+		"setenv bootargs ${common_bootargs} ${extra_bootargs} "\
+		"${bootdev_bootargs}\0"\
+	"regen_net_bootargs=setenv bootdev_bootargs "\
+			"dev=/dev/nfs4 rw nfsroot=${nfsserverip}:${rootpath} "\
+			"ip=dhcp; "\
+		"run regen_all\0"\
+	\
+	"dhcp_setup=setenv tftppath "\
+			"/tftpboot/uImage-${user}-${board}-${serial#}; "\
+		"setenv rootpath " CONFIG_ROOTPATH "; "\
+		"setenv autoload n; "\
+		"run regen_net_bootargs\0"\
+	"dhcp_boot=run dhcp_setup; "\
+		"bootp; tftpboot ${loadaddr} ${tftpserverip}:${tftppath}; "\
+		"bootm ${loadaddr}\0"\
+	\
+	"keynfs_setup="\
+		"setenv rootpath " CONFIG_ROOTPATH "; "\
+		"run regen_net_bootargs\0" \
+	"keynfs_boot=run keynfs_setup; "\
+		"ext2load usb 0:1 ${loadaddr} uImage; "\
+		"bootm ${loadaddr}\0" \
+	\
+	"usb_setup=setenv bootdev_bootargs "\
+		"root=/dev/sda3; "\
+		"run regen_all\0"\
+	"usb_boot=run usb_setup; "\
+		"ext2load usb 0:3 ${loadaddr} ${cros_bootfile}; "\
+		"bootm ${loadaddr}\0" \
+	\
+	"mmc_setup=mmc init ${mmcdev}; setenv bootdev_bootargs "\
+		"root=/dev/mmcblk0p5; "\
+		"run regen_all\0"\
+	"mmc_boot=run mmc_setup; "\
+		"ext2load mmc ${mmcdev}:3 ${loadaddr} ${cros_bootfile}; "\
+		"bootm ${loadaddr}\0"
+
+
 #endif //__configs_chromeos_tegra2_developer_h__