Make the implementation .cc files go away, instead have the authors give us a...

ipc/ipc_message_macros.h

-// Copyright (c) 2006-2008 The Chromium Authors. All rights reserved.
+// Copyright (c) 2011 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
-// This header is meant to be included in multiple passes, hence no traditional
-// header guard.
+// Defining IPC Messages
 //
-// In your XXX_messages_internal.h file, before defining any messages do:
-//     #define IPC_MESSAGE_START XMsgStart
-// XMstStart value is from the IPCMessageStart enum in ipc_message_utils.h, and
-// needs to be unique for each different file.
-// In your XXX_messages.cc file, after all the includes for param types:
+// Your IPC messages will be defined by macros inside of an XXX_messages.h
+// header file.  Most of the time, the system can automatically generate all
+// of messaging mechanism from these definitions, but sometimes some manual
+// coding is required.  In these cases, you will also have an XXX_messages.cc
+// implemation file as well.
+//
+// The senders of your messages will include your XXX_messages.h file to
+// get the full set of definitions they need to send your messages.
+//
+// Each XXX_messages.h file must be registered with the IPC system.  This
+// requires adding two things:
+//   - An XXXMsgStart value to the IPCMessageStart enum in ipc_message_utils.h
+//   - An inclusion of XXX_messages.h file in a message generator .h file
+//
+// The XXXMsgStart value is an enumeration that ensures uniqueness for
+// each different message file.  Later, you will use this inside your
+// XXX_messages.h file to surrond your message declatation macros:
+//     #define IPC_MESSAGE_START XXXMsgStart
+//       ( ... your macro invocations go here ... )
+//     #undef IPC_MESSAGE_START
+//
+// A message generator .h header file pulls in all other message-declaring
+// headers for a given component.  It is included by a message generator
+// .cc file, which is where all the generated code will wind up.  Typically,
+// you will use an existing generator (e.g. common_message_generator.cc and
+// common_message_generator.h in /chrome/common), but there are circumstances
+// where you may add a new one.
+
+// In the rare cicrucmstances where you can't re-use an existing file,
+// your YYY_message_generator.cc file for a component YYY would contain
+// the following code:
+//     // Get basic type definitions.
 //     #define IPC_MESSAGE_IMPL
-//     #include "X_messages.h"
+//     #include "path/to/YYY_message_generator.h"
+//     // Generate constructors.
+//     #include "ipc/struct_constructor_macros.h"
+//     #include "path/to/YYY_message_generator.h"
+//     // Generate destructors.
+//     #include "ipc/struct_destructor_macros.h"
+//     #include "path/to/YYY_message_generator.h"
+//     namespace IPC {
+//     // Generate param traits write methods.
+//     #include "ipc/ipc_param_traits_write_macros.h"
+//     #include "path/to/YYY_message_generator.h"
+//     // Generate param traits read methods.
+//     #include "ipc/ipc_param_traits_read_macros.h"
+//     #include "path/to/YYY_message_generator.h"
+//     // Generate param traits log methods.
+//     #include "ipc/ipc_param_traits_log_macros.h"
+//     #include "path/to/YYY_message_generator.h"
+//     }  // namespace IPC
 //
+// In cases where manual generation is required, in your XXX_messages.cc
+// file, put the following after all the includes for param types:
+//     #define IPC_MESSAGE_IMPL
+//     #include "XXXX_messages.h"
+//
+// The XXX_messages.h file will be multiply-included by the
+// YYY_message_generator.cc file, so your XXX_messages file must be
+// specially guarded.  There will be two sections of the file, one of
+// which declares types and is singly-evalutead, and another which invokes
+// macros and is multiply-evaluated.  The convention used is as follows:
+//     #ifndef XXX_MESSAGES_H_
+//     #define XXX_MESSAGES_H_
+//        (... the type definition section goes here ...)
+//     #endif  // XXX_MESSAGES_H_
+//     #define IPC_MESSAGE_START XXXMsgStart
+//        (... the message macro invocations go here ...)
+//     #undef IPC_MESSAGE_START
+//
+// Note that there is no #pragma once; doing so would mark the whole file
+// as being singly-included.  Since your XXX_messages.h file is only
+// partially-guarded, care must be taken to ensure that it is only included
+// by other .cc files (and the YYY_message_generator.h file).  Including an
+// XXX_messages.h file in some other .h file may result in duplicate
+// declarations and a compilation failure.
+//
+// Inside the type definition section, you include all of the headers
+// required to define the types later used in your message macro invocations.
+// Sometimes is it convenient to provide an incomplete class type declaration
+// to avoid pulling in a long chain of headers.  This is acceptable when
+// your XXX_messages.h header is being included by the message sending code,
+// but not when the YYY_message_generator.c is building the messages. In
+// these cases, follow a convention like:
+//      class some_class;        // One incomplete class declaration
+//      class_some_other_class;  // Another incomplete class declaration
+//      #ifdef IPC_MESSAGE_IMPL
+//      #inlcude "path/to/some_class.h"        // Full class declaration
+//      #inlcude "path/to/some_other_class.h"  // Full class declaration
+//      #endif  // IPC_MESSAGE_IMPL
+//
+// Inside the message macro invocation secton, use macros for three things:
+//   - New struct definitions for IPC
+//   - Registering existing struct and enum definitions with IPC
+//   - Defining the messages themselves
+//
+// New structs are defined with IPC_STRUCT_BEGIN(), IPC_STRUCT_MEMBER(),
+// IPC_STRUCT_END() family of macros.  These cause the XXX_messages.h
+// to proclaim equivalent struct declarations for use by callers, as well
+// as later registering the type with the message generation.  Note that
+// IPC_STRUCT_MEMBER() is only permitted inside matching calls to
+// IPC_STRUCT_BEGIN() / IPC_STRUCT_END().
+//
+// Externally-defined structs are registered with IPC_STRUCT_TRAITS_BEGIN(),
+// IPC_STRUCT_TRAITS_MEMBER(), and IPC_STRUCT_TRAITS_END() macros. These
+// cause registration of the types with message generation only.  Note that
+// IPC_STRUCT_TRAITS_MEMBER() is only permitted inside matching calls
+// to IPC_STRUCT_TRAITS_BEGIN() / IPC_STRUCT_TRAITS_END().
+//
+// Enum types are registered with a single IPC_ENUM_TRAITS() macro.  There
+// is no need to enumerate each value to the IPC mechanism.
+//
+// Once the types have been declared / registered, message definitions follow.
 // "Sync" messages are just synchronous calls, the Send() call doesn't return
 // until a reply comes back.  Input parameters are first (const TYPE&), and
 // To declare a sync message, use the IPC_SYNC_ macros.  The numbers at the
 // end show how many input/output parameters there are (i.e. 1_2 is 1 in, 2
 // out). The caller does a Send([route id, ], in1, &out1, &out2).
 // The receiver's handler function will be
 //     void OnSyncMessageName(const type1& in1, type2* out1, type3* out2)
 //
-//
 // A caller can also send a synchronous message, while the receiver can respond
 // at a later time.  This is transparent from the sender's side.  The receiver
 // needs to use a different handler that takes in a IPC::Message* as the output
 // type, stash the message, and when it has the data it can Send the message.
 //
 // Use the IPC_MESSAGE_HANDLER_DELAY_REPLY macro instead of IPC_MESSAGE_HANDLER
 //     IPC_MESSAGE_HANDLER_DELAY_REPLY(ViewHostMsg_SyncMessageName,
 //                                     OnSyncMessageName)
 //
 // The handler function will look like:
 //     void OnSyncMessageName(const type1& in1, IPC::Message* reply_msg);
 //
 // Receiver stashes the IPC::Message* pointer, and when it's ready, it does:
 //     ViewHostMsg_SyncMessageName::WriteReplyParams(reply_msg, out1, out2);
 //     Send(reply_msg);
 
+#ifndef IPC_IPC_MESSAGE_MACROS_H_
+#define IPC_IPC_MESSAGE_MACROS_H_
+// Can use #pragma once all XXX_messages.h files clean up IPC_MESSAGE_START
+
 #include "ipc/ipc_message_utils.h"
-
-// In case a file includes several X_messages.h files, we don't want to get
-// errors because each X_messages_internal.h file will define this.
-#undef IPC_MESSAGE_START
+#include "ipc/ipc_param_traits_macros.h"
 
 #if defined(IPC_MESSAGE_IMPL)
 #include "ipc/ipc_message_impl_macros.h"
 #elif defined(IPC_MESSAGE_MACROS_LOG_ENABLED)
 
 #ifndef IPC_LOG_TABLE_CREATED
 #define IPC_LOG_TABLE_CREATED
 
 #include "base/hash_tables.h"
 
 typedef void (*LogFunction)(std::string* name,
                             const IPC::Message* msg,
                             std::string* params);
 
 typedef base::hash_map<uint32, LogFunction > LogFunctionMap;
 LogFunctionMap g_log_function_mapping;
 
-#endif
+#endif  // IPC_LOG_TABLE_CREATED
 
 
 #define IPC_MESSAGE_LOG(msg_class) \
   class LoggerRegisterHelper##msg_class { \
    public: \
     LoggerRegisterHelper##msg_class() { \
       g_log_function_mapping[msg_class::ID] = msg_class::Log; \
     } \
   }; \
   LoggerRegisterHelper##msg_class g_LoggerRegisterHelper##msg_class;
@@ skipping 199 matching lines @@
 
 #define IPC_SYNC_MESSAGE_ROUTED5_2_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out) \
   IPC_MESSAGE_LOG(msg_class)
 
 #define IPC_SYNC_MESSAGE_ROUTED5_3_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type3_out) \
   IPC_MESSAGE_LOG(msg_class)
 
 #define IPC_SYNC_MESSAGE_ROUTED5_4_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type3_out, type4_out) \
   IPC_MESSAGE_LOG(msg_class)
 
-#else
+#else  // defined(IPC_MESSAGE_MACROS_LOG_ENABLED)
 
 #define IPC_MESSAGE_CONTROL0_EXTRA(msg_class)
 #define IPC_MESSAGE_CONTROL1_EXTRA(msg_class, type1)
 #define IPC_MESSAGE_CONTROL2_EXTRA(msg_class, type1, type2)
 #define IPC_MESSAGE_CONTROL3_EXTRA(msg_class, type1, type2, type3)
 #define IPC_MESSAGE_CONTROL4_EXTRA(msg_class, type1, type2, type3, type4)
 #define IPC_MESSAGE_CONTROL5_EXTRA(msg_class, type1, type2, type3, type4, type5)
 #define IPC_MESSAGE_ROUTED0_EXTRA(msg_class)
 #define IPC_MESSAGE_ROUTED1_EXTRA(msg_class, type1)
 #define IPC_MESSAGE_ROUTED2_EXTRA(msg_class, type1, type2)
@@ skipping 51 matching lines @@
 #define IPC_SYNC_MESSAGE_ROUTED4_1_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out)
 #define IPC_SYNC_MESSAGE_ROUTED4_2_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out)
 #define IPC_SYNC_MESSAGE_ROUTED4_3_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out)
 #define IPC_SYNC_MESSAGE_ROUTED4_4_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out, type4_out)
 #define IPC_SYNC_MESSAGE_ROUTED5_0_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in)
 #define IPC_SYNC_MESSAGE_ROUTED5_1_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out)
 #define IPC_SYNC_MESSAGE_ROUTED5_2_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out)
 #define IPC_SYNC_MESSAGE_ROUTED5_3_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type3_out)
 #define IPC_SYNC_MESSAGE_ROUTED5_4_EXTRA(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type4_out)
 
-#endif
+#endif  // defined(IPC_MESSAGE_MACROS_LOG_ENABLED)
+
+// Macros for defining structs.  May be subsequently redefined.
+#define IPC_STRUCT_BEGIN(struct_name) \
+  struct struct_name; \
+  IPC_STRUCT_TRAITS_BEGIN(struct_name) \
+  IPC_STRUCT_TRAITS_END() \
+  struct struct_name : IPC::NoParams { \
+    struct_name(); \
+    ~struct_name();
+#define IPC_STRUCT_MEMBER(type, name) type name;
+#define IPC_STRUCT_END() };
 
 // Note: we currently use __LINE__ to give unique IDs to messages within a file.
 // They're globally unique since each file defines its own IPC_MESSAGE_START.
 // Ideally, we wouldn't use line numbers, but instead use the __COUNTER__ macro,
 // but it needs gcc 4.3 and xcode doesn't use it yet.  When that happens, switch
 // to it.
 
 #define IPC_MESSAGE_CONTROL0(msg_class) \
   class msg_class : public IPC::Message { \
    public: \
@@ skipping 870 matching lines @@
   } \
 }
 
 #define IPC_END_MESSAGE_MAP_EX() \
   } \
 }
 
 // This corresponds to an enum value from IPCMessageStart.
 #define IPC_MESSAGE_CLASS(message) \
   message.type() >> 16
+
+#endif  // IPC_IPC_MESSAGE_MACROS_H_
+
+// Clean up IPC_MESSAGE_START in this unguarded section until all
+// XXX_message.h files do so themselves.

[jam, 2011/02/09 23:06:15]

wouldn't it be better to just do it only in this file, and hence not depend on
each file remembering to do it?

+#undef IPC_MESSAGE_START
+