Index: src/x64/deoptimizer-x64.cc |
=================================================================== |
--- src/x64/deoptimizer-x64.cc (revision 6418) |
+++ src/x64/deoptimizer-x64.cc (working copy) |
@@ -41,8 +41,68 @@ |
int Deoptimizer::table_entry_size_ = 10; |
void Deoptimizer::DeoptimizeFunction(JSFunction* function) { |
- // UNIMPLEMENTED, for now just return. |
- return; |
+ AssertNoAllocation no_allocation; |
+ |
+ if (!function->IsOptimized()) return; |
+ |
+ // Get the optimized code. |
+ Code* code = function->code(); |
+ |
+ // Invalidate the relocation information, as it will become invalid by the |
+ // code patching below, and is not needed any more. |
+ code->InvalidateRelocation(); |
+ |
+ // For each return after a safepoint insert a absolute call to the |
+ // corresponding deoptimization entry. |
+ unsigned last_pc_offset = 0; |
+ SafepointTable table(function->code()); |
+ for (unsigned i = 0; i < table.length(); i++) { |
+ unsigned pc_offset = table.GetPcOffset(i); |
+ SafepointEntry safepoint_entry = table.GetEntry(i); |
+ int deoptimization_index = safepoint_entry.deoptimization_index(); |
+ int gap_code_size = safepoint_entry.gap_code_size(); |
+#ifdef DEBUG |
+ // Destroy the code which is not supposed to run again. |
+ unsigned instructions = pc_offset - last_pc_offset; |
+ CodePatcher destroyer(code->instruction_start() + last_pc_offset, |
+ instructions); |
+ for (unsigned i = 0; i < instructions; i++) { |
+ destroyer.masm()->int3(); |
+ } |
+#endif |
+ last_pc_offset = pc_offset; |
+ if (deoptimization_index != Safepoint::kNoDeoptimizationIndex) { |
+ CodePatcher patcher( |
+ code->instruction_start() + pc_offset + gap_code_size, |
+ Assembler::kCallInstructionLength); |
+ patcher.masm()->Call(GetDeoptimizationEntry(deoptimization_index, LAZY), |
+ RelocInfo::NONE); |
+ last_pc_offset += gap_code_size + Assembler::kCallInstructionLength; |
+ } |
+ } |
+#ifdef DEBUG |
+ // Destroy the code which is not supposed to run again. |
+ unsigned instructions = code->safepoint_table_start() - last_pc_offset; |
+ CodePatcher destroyer(code->instruction_start() + last_pc_offset, |
+ instructions); |
+ for (unsigned i = 0; i < instructions; i++) { |
+ destroyer.masm()->int3(); |
+ } |
+#endif |
+ |
+ // Add the deoptimizing code to the list. |
+ DeoptimizingCodeListNode* node = new DeoptimizingCodeListNode(code); |
+ node->set_next(deoptimizing_code_list_); |
+ deoptimizing_code_list_ = node; |
+ |
+ // Set the code for the function to non-optimized version. |
+ function->ReplaceCode(function->shared()->code()); |
+ |
+ if (FLAG_trace_deopt) { |
+ PrintF("[forced deoptimization: "); |
+ function->PrintName(); |
+ PrintF(" / %" V8PRIxPTR "]\n", reinterpret_cast<intptr_t>(function)); |
+ } |
} |
@@ -64,20 +124,384 @@ |
void Deoptimizer::DoComputeFrame(TranslationIterator* iterator, |
int frame_index) { |
- UNIMPLEMENTED(); |
+ // Read the ast node id, function, and frame height for this output frame. |
+ Translation::Opcode opcode = |
+ static_cast<Translation::Opcode>(iterator->Next()); |
+ USE(opcode); |
+ ASSERT(Translation::FRAME == opcode); |
+ int node_id = iterator->Next(); |
+ JSFunction* function = JSFunction::cast(ComputeLiteral(iterator->Next())); |
+ unsigned height = iterator->Next(); |
+ unsigned height_in_bytes = height * kPointerSize; |
+ if (FLAG_trace_deopt) { |
+ PrintF(" translating "); |
+ function->PrintName(); |
+ PrintF(" => node=%d, height=%d\n", node_id, height_in_bytes); |
+ } |
+ |
+ // The 'fixed' part of the frame consists of the incoming parameters and |
+ // the part described by JavaScriptFrameConstants. |
+ unsigned fixed_frame_size = ComputeFixedSize(function); |
+ unsigned input_frame_size = input_->GetFrameSize(); |
+ unsigned output_frame_size = height_in_bytes + fixed_frame_size; |
+ |
+ // Allocate and store the output frame description. |
+ FrameDescription* output_frame = |
+ new(output_frame_size) FrameDescription(output_frame_size, function); |
+ |
+ bool is_bottommost = (0 == frame_index); |
+ bool is_topmost = (output_count_ - 1 == frame_index); |
+ ASSERT(frame_index >= 0 && frame_index < output_count_); |
+ ASSERT(output_[frame_index] == NULL); |
+ output_[frame_index] = output_frame; |
+ |
+ // The top address for the bottommost output frame can be computed from |
+ // the input frame pointer and the output frame's height. For all |
+ // subsequent output frames, it can be computed from the previous one's |
+ // top address and the current frame's size. |
+ intptr_t top_address; |
+ if (is_bottommost) { |
+ // 2 = context and function in the frame. |
+ top_address = |
+ input_->GetRegister(rbp.code()) - (2 * kPointerSize) - height_in_bytes; |
+ } else { |
+ top_address = output_[frame_index - 1]->GetTop() - output_frame_size; |
+ } |
+ output_frame->SetTop(top_address); |
+ |
+ // Compute the incoming parameter translation. |
+ int parameter_count = function->shared()->formal_parameter_count() + 1; |
+ unsigned output_offset = output_frame_size; |
+ unsigned input_offset = input_frame_size; |
+ for (int i = 0; i < parameter_count; ++i) { |
+ output_offset -= kPointerSize; |
+ DoTranslateCommand(iterator, frame_index, output_offset); |
+ } |
+ input_offset -= (parameter_count * kPointerSize); |
+ |
+ // There are no translation commands for the caller's pc and fp, the |
+ // context, and the function. Synthesize their values and set them up |
+ // explicitly. |
+ // |
+ // The caller's pc for the bottommost output frame is the same as in the |
+ // input frame. For all subsequent output frames, it can be read from the |
+ // previous one. This frame's pc can be computed from the non-optimized |
+ // function code and AST id of the bailout. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ intptr_t value; |
+ if (is_bottommost) { |
+ value = input_->GetFrameSlot(input_offset); |
+ } else { |
+ value = output_[frame_index - 1]->GetPc(); |
+ } |
+ output_frame->SetFrameSlot(output_offset, value); |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08" V8PRIxPTR ": [top + %d] <- 0x%08" |
+ V8PRIxPTR " ; caller's pc\n", |
+ top_address + output_offset, output_offset, value); |
+ } |
+ |
+ // The caller's frame pointer for the bottommost output frame is the same |
+ // as in the input frame. For all subsequent output frames, it can be |
+ // read from the previous one. Also compute and set this frame's frame |
+ // pointer. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ if (is_bottommost) { |
+ value = input_->GetFrameSlot(input_offset); |
+ } else { |
+ value = output_[frame_index - 1]->GetFp(); |
+ } |
+ output_frame->SetFrameSlot(output_offset, value); |
+ intptr_t fp_value = top_address + output_offset; |
+ ASSERT(!is_bottommost || input_->GetRegister(rbp.code()) == fp_value); |
+ output_frame->SetFp(fp_value); |
+ if (is_topmost) output_frame->SetRegister(rbp.code(), fp_value); |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08" V8PRIxPTR ": [top + %d] <- 0x%08" |
+ V8PRIxPTR " ; caller's fp\n", |
+ fp_value, output_offset, value); |
+ } |
+ |
+ // The context can be gotten from the function so long as we don't |
+ // optimize functions that need local contexts. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ value = reinterpret_cast<intptr_t>(function->context()); |
+ // The context for the bottommost output frame should also agree with the |
+ // input frame. |
+ ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value); |
+ output_frame->SetFrameSlot(output_offset, value); |
+ if (is_topmost) output_frame->SetRegister(rsi.code(), value); |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08" V8PRIxPTR ": [top + %d] <- 0x%08" |
+ V8PRIxPTR "; context\n", |
+ top_address + output_offset, output_offset, value); |
+ } |
+ |
+ // The function was mentioned explicitly in the BEGIN_FRAME. |
+ output_offset -= kPointerSize; |
+ input_offset -= kPointerSize; |
+ value = reinterpret_cast<intptr_t>(function); |
+ // The function for the bottommost output frame should also agree with the |
+ // input frame. |
+ ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value); |
+ output_frame->SetFrameSlot(output_offset, value); |
+ if (FLAG_trace_deopt) { |
+ PrintF(" 0x%08" V8PRIxPTR ": [top + %d] <- 0x%08" |
+ V8PRIxPTR "; function\n", |
+ top_address + output_offset, output_offset, value); |
+ } |
+ |
+ // Translate the rest of the frame. |
+ for (unsigned i = 0; i < height; ++i) { |
+ output_offset -= kPointerSize; |
+ DoTranslateCommand(iterator, frame_index, output_offset); |
+ } |
+ ASSERT(0 == output_offset); |
+ |
+ // Compute this frame's PC, state, and continuation. |
+ Code* non_optimized_code = function->shared()->code(); |
+ FixedArray* raw_data = non_optimized_code->deoptimization_data(); |
+ DeoptimizationOutputData* data = DeoptimizationOutputData::cast(raw_data); |
+ Address start = non_optimized_code->instruction_start(); |
+ unsigned pc_and_state = GetOutputInfo(data, node_id, function->shared()); |
+ unsigned pc_offset = FullCodeGenerator::PcField::decode(pc_and_state); |
+ intptr_t pc_value = reinterpret_cast<intptr_t>(start + pc_offset); |
+ output_frame->SetPc(pc_value); |
+ |
+ FullCodeGenerator::State state = |
+ FullCodeGenerator::StateField::decode(pc_and_state); |
+ output_frame->SetState(Smi::FromInt(state)); |
+ |
+ // Set the continuation for the topmost frame. |
+ if (is_topmost) { |
+ Code* continuation = (bailout_type_ == EAGER) |
+ ? Builtins::builtin(Builtins::NotifyDeoptimized) |
+ : Builtins::builtin(Builtins::NotifyLazyDeoptimized); |
+ output_frame->SetContinuation( |
+ reinterpret_cast<intptr_t>(continuation->entry())); |
+ } |
+ |
+ if (output_count_ - 1 == frame_index) iterator->Done(); |
} |
+#define __ masm()-> |
+ |
void Deoptimizer::EntryGenerator::Generate() { |
- // UNIMPLEMENTED, for now just return. |
- return; |
+ GeneratePrologue(); |
+ CpuFeatures::Scope scope(SSE2); |
+ |
+ // Save all general purpose registers before messing with them. |
+ const int kNumberOfRegisters = Register::kNumRegisters; |
+ |
+ const int kDoubleRegsSize = kDoubleSize * |
+ XMMRegister::kNumAllocatableRegisters; |
+ __ subq(rsp, Immediate(kDoubleRegsSize)); |
+ |
+ for (int i = 0; i < XMMRegister::kNumAllocatableRegisters; ++i) { |
+ XMMRegister xmm_reg = XMMRegister::FromAllocationIndex(i); |
+ int offset = i * kDoubleSize; |
+ __ movsd(Operand(rsp, offset), xmm_reg); |
+ } |
+ |
+ // We push all registers onto the stack, even though we do not need |
+ // to restore all later. |
+ for (int i = 0; i < kNumberOfRegisters; i++) { |
+ Register r = Register::toRegister(i); |
+ __ push(r); |
+ } |
+ |
+ const int kSavedRegistersAreaSize = kNumberOfRegisters * kPointerSize + |
+ kDoubleRegsSize; |
+ |
+ // When calling new_deoptimizer_function we need to pass the last argument |
+ // on the stack on windows and in r8 on linux. The remaining arguments are |
+ // all passed in registers (different ones on linux and windows though). |
+ |
+#ifdef _WIN64 |
+ Register arg4 = r9; |
+ Register arg3 = r8; |
+ Register arg2 = rdx; |
+ Register arg1 = rcx; |
+#else |
+ Register arg4 = rcx; |
+ Register arg3 = rdx; |
+ Register arg2 = rsi; |
+ Register arg1 = rdi; |
+#endif |
+ |
+ // We use this to keep the value of the fifth argument temporarily. |
+ // Unfortunately we can't store it directly in r8 (used for passing |
+ // this on linux), since it is another parameter passing register on windows. |
+ Register arg5 = r11; |
+ |
+ // Get the bailout id from the stack. |
+ __ movq(arg3, Operand(rsp, kSavedRegistersAreaSize)); |
+ |
+ // Get the address of the location in the code object if possible |
+ // and compute the fp-to-sp delta in register arg5. |
+ if (type() == EAGER) { |
+ __ Set(arg4, 0); |
+ __ lea(arg5, Operand(rsp, kSavedRegistersAreaSize + 1 * kPointerSize)); |
+ } else { |
+ __ movq(arg4, Operand(rsp, kSavedRegistersAreaSize + 1 * kPointerSize)); |
+ __ lea(arg5, Operand(rsp, kSavedRegistersAreaSize + 2 * kPointerSize)); |
+ } |
+ |
+ __ subq(arg5, rbp); |
+ __ neg(arg5); |
+ |
+ // Allocate a new deoptimizer object. |
+ __ PrepareCallCFunction(5); |
+ __ movq(rax, Operand(rbp, JavaScriptFrameConstants::kFunctionOffset)); |
+ __ movq(arg1, rax); |
+ __ movq(arg2, Immediate(type())); |
+ // Args 3 and 4 are already in the right registers. |
+ |
+ // On windows put the argument on the stack (PrepareCallCFunction have |
+ // created space for this). On linux pass the argument in r8. |
+#ifdef _WIN64 |
+ __ movq(Operand(rsp, 0 * kPointerSize), arg5); |
+#else |
+ __ movq(r8, arg5); |
+#endif |
+ |
+ __ CallCFunction(ExternalReference::new_deoptimizer_function(), 5); |
+ // Preserve deoptimizer object in register rax and get the input |
+ // frame descriptor pointer. |
+ __ movq(rbx, Operand(rax, Deoptimizer::input_offset())); |
+ |
+ // Fill in the input registers. |
+ for (int i = kNumberOfRegisters -1; i >= 0; i--) { |
+ int offset = (i * kPointerSize) + FrameDescription::registers_offset(); |
+ __ pop(Operand(rbx, offset)); |
+ // __ movq(rcx, Operand(rsp, (kNumberOfRegisters - 1 - i) * kPointerSize)); |
+ // __ movq(Operand(rbx, offset), rcx); |
+ } |
+ |
+ // Fill in the double input registers. |
+ int double_regs_offset = FrameDescription::double_registers_offset(); |
+ for (int i = 0; i < XMMRegister::kNumAllocatableRegisters; i++) { |
+ int dst_offset = i * kDoubleSize + double_regs_offset; |
+ __ pop(Operand(rbx, dst_offset)); |
+ } |
+ |
+ // Remove the bailout id and the general purpose registers from the stack. |
+ if (type() == EAGER) { |
+ __ addq(rsp, Immediate(kPointerSize)); |
+ } else { |
+ __ addq(rsp, Immediate(2 * kPointerSize)); |
+ } |
+ |
+ // Compute a pointer to the unwinding limit in register ecx; that is |
+ // the first stack slot not part of the input frame. |
+ __ movq(rcx, Operand(rbx, FrameDescription::frame_size_offset())); |
+ __ addq(rcx, rsp); |
+ |
+ // Unwind the stack down to - but not including - the unwinding |
+ // limit and copy the contents of the activation frame to the input |
+ // frame description. |
+ __ lea(rdx, Operand(rbx, FrameDescription::frame_content_offset())); |
+ Label pop_loop; |
+ __ bind(&pop_loop); |
+ __ pop(Operand(rdx, 0)); |
+ __ addq(rdx, Immediate(sizeof(intptr_t))); |
+ __ cmpq(rcx, rsp); |
+ __ j(not_equal, &pop_loop); |
+ |
+ // Compute the output frame in the deoptimizer. |
+ __ push(rax); |
+ __ PrepareCallCFunction(1); |
+ __ movq(arg1, rax); |
+ __ CallCFunction(ExternalReference::compute_output_frames_function(), 1); |
+ __ pop(rax); |
+ |
+ // Replace the current frame with the output frames. |
+ Label outer_push_loop, inner_push_loop; |
+ // Outer loop state: rax = current FrameDescription**, rdx = one past the |
+ // last FrameDescription**. |
+ __ movl(rdx, Operand(rax, Deoptimizer::output_count_offset())); |
+ __ movq(rax, Operand(rax, Deoptimizer::output_offset())); |
+ __ lea(rdx, Operand(rax, rdx, times_8, 0)); |
+ __ bind(&outer_push_loop); |
+ // Inner loop state: rbx = current FrameDescription*, rcx = loop index. |
+ __ movq(rbx, Operand(rax, 0)); |
+ __ movq(rcx, Operand(rbx, FrameDescription::frame_size_offset())); |
+ __ bind(&inner_push_loop); |
+ __ subq(rcx, Immediate(sizeof(intptr_t))); |
+ __ push(Operand(rbx, rcx, times_1, FrameDescription::frame_content_offset())); |
+ __ testq(rcx, rcx); |
+ __ j(not_zero, &inner_push_loop); |
+ __ addq(rax, Immediate(kPointerSize)); |
+ __ cmpq(rax, rdx); |
+ __ j(below, &outer_push_loop); |
+ |
+ // In case of OSR, we have to restore the XMM registers. |
+ if (type() == OSR) { |
+ for (int i = 0; i < XMMRegister::kNumAllocatableRegisters; ++i) { |
+ XMMRegister xmm_reg = XMMRegister::FromAllocationIndex(i); |
+ int src_offset = i * kDoubleSize + double_regs_offset; |
+ __ movsd(xmm_reg, Operand(rbx, src_offset)); |
+ } |
+ } |
+ |
+ // Push state, pc, and continuation from the last output frame. |
+ if (type() != OSR) { |
+ __ push(Operand(rbx, FrameDescription::state_offset())); |
+ } |
+ __ push(Operand(rbx, FrameDescription::pc_offset())); |
+ __ push(Operand(rbx, FrameDescription::continuation_offset())); |
+ |
+ // Push the registers from the last output frame. |
+ for (int i = 0; i < kNumberOfRegisters; i++) { |
+ int offset = (i * kPointerSize) + FrameDescription::registers_offset(); |
+ __ push(Operand(rbx, offset)); |
+ } |
+ |
+ // Restore the registers from the stack. |
+ for (int i = kNumberOfRegisters - 1; i >= 0 ; i--) { |
+ Register r = Register::toRegister(i); |
+ // Do not restore rsp, simply pop the value into the next register |
+ // and overwrite this afterwards. |
+ if (r.is(rsp)) { |
+ ASSERT(i > 0); |
+ r = Register::toRegister(i - 1); |
+ } |
+ __ pop(r); |
+ } |
+ |
+ // Set up the roots register. |
+ ExternalReference roots_address = ExternalReference::roots_address(); |
+ __ movq(r13, roots_address); |
+ |
+ __ movq(kSmiConstantRegister, |
+ reinterpret_cast<uint64_t>(Smi::FromInt(kSmiConstantRegisterValue)), |
+ RelocInfo::NONE); |
+ |
+ // Return to the continuation point. |
+ __ ret(0); |
} |
void Deoptimizer::TableEntryGenerator::GeneratePrologue() { |
- UNIMPLEMENTED(); |
+ // Create a sequence of deoptimization entries. |
+ Label done; |
+ for (int i = 0; i < count(); i++) { |
+ int start = masm()->pc_offset(); |
+ USE(start); |
+ __ push_imm32(i); |
+ __ jmp(&done); |
+ ASSERT(masm()->pc_offset() - start == table_entry_size_); |
+ } |
+ __ bind(&done); |
} |
+#undef __ |
+ |
+ |
} } // namespace v8::internal |
#endif // V8_TARGET_ARCH_X64 |