Remove buildbot code that has been added to chromite.

bin/cbuildbot_config.py

Index: bin/cbuildbot_config.py
diff --git a/bin/cbuildbot_config.py b/bin/cbuildbot_config.py
deleted file mode 100644
index 23eabe222fd50b65c47a867cc1fe73488fa19ca3..0000000000000000000000000000000000000000
--- a/bin/cbuildbot_config.py
+++ /dev/null
@@ -1,217 +0,0 @@
-# Copyright (c) 2010 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-
-"""Dictionary of configuration types for cbuildbot.
-
-Each dictionary entry is in turn a dictionary of config_param->value.
-
-config_param's:
-board -- The board of the image to build.
-
-master -- This bot pushes changes to the overlays.
-important -- Master bot uses important bots to determine overall status.
-             i.e. if master bot succeeds and other important slaves succeed
-             then the master will uprev packages.  This should align
-             with info vs. closer except for the master.and options.tests
-hostname -- Needed for 'important' slaves.  The hostname of the bot.  Should
-            match hostname in slaves.cfg in buildbot checkout.
-
-uprev -- Uprevs the local ebuilds to build new changes since last stable.
-         build.  If master then also pushes these changes on success.
-rev_overlays -- Select what overlays to look at for revving. This can be
-                'public', 'private' or 'both'.
-push_overlays -- Select what overlays to push at. This should be a subset of
-                 rev_overlays for the particular builder.  Must be None if
-                 not a master.  There should only be one master bot pushing
-                 changes to each overlay per branch.
-
-unittests -- Runs unittests for packages.
-vm_tests -- Runs the smoke suite and au test harness in a qemu-based VM
-            using KVM.
-
-usepkg -- Use binary packages to bootstrap, when possible. (emerge --usepkg)
-chroot_replace -- wipe and replace chroot, but not source.
-
-archive_build -- Do we run archive_build.sh
-test_mod -- Create a test mod image for archival.
-factory_install_mod -- Create a factory install image for archival.
-factory_test_mod -- Create a factory test image for archival.
-"""
-
-# TODO(dgarrett) Make test_mod, factory_install_mod, factory_test_mod options
-# go away when these options work for arm.
-
-default = {
-  # 'board' No default value
-
-  'master' : False,
-  'important' : False,
-  # 'hostname' No default value
-
-  'uprev' : False,
-  'rev_overlays': 'public',
-  'push_overlays': None,
-
-  'unittests' : True,
-  'vm_tests' : True,
-
-  'usepkg' : True,
-  'chroot_replace' : False,
-
-  'archive_build' : False,
-  'test_mod' : True,
-  'factory_install_mod' : True,
-  'factory_test_mod' : True,
-}
-
-arm = {
-  # VM/tests are broken on arm.
-  'unittests' : False,
-  'vm_tests' : False,
-
-  # These images don't work for arm.
-  'factory_install_mod' : False,
-  'factory_test_mod' : False,
-}
-
-full = {
-  # Full builds are test build to show that we can build from scratch,
-  # so use settings to build from scratch, and archive the results.
-  'usepkg' : False,
-  'chroot_replace' : True,
-
-  'archive_build' : True
-}
-
-
-config = {}
-
-config['x86-generic-pre-flight-queue'] = default.copy()
-config['x86-generic-pre-flight-queue'].update({
-  'board' : 'x86-generic',
-  'master' : True,
-  'hostname' : 'chromeosbuild2',
-
-  'uprev' : True,
-  'rev_overlays': 'public',
-  'push_overlays': 'public',
-})
-
-config['x86-generic-chrome-pre-flight-queue'] = default.copy()
-config['x86-generic-chrome-pre-flight-queue'].update({
-  'board' : 'x86-generic',
-  'master' : True,
-
-  'uprev' : False,
-  'rev_overlays': 'public',
-  'push_overlays': 'public',
-})
-
-
-config['x86-mario-pre-flight-queue'] = default.copy()
-config['x86-mario-pre-flight-queue'].update({
-  'board' : 'x86-mario',
-  'master' : True,
-
-  'uprev' : True,
-  'rev_overlays': 'both',
-  'push_overlays': 'private',
-})
-
-config['x86-mario-pre-flight-branch'] = default.copy()
-config['x86-mario-pre-flight-branch'].update({
-  'board' : 'x86-mario',
-  'master' : True,
-
-  'uprev' : True,
-  'rev_overlays': 'both',
-  'push_overlays': 'both',
-})
-
-config['x86-agz-bin'] = default.copy()
-config['x86-agz-bin'].update({
-  'board' : 'x86-agz',
-
-  'uprev' : True,
-  'rev_overlays': 'both',
-  'push_overlays': None,
-})
-
-config['x86-dogfood-bin'] = default.copy()
-config['x86-dogfood-bin'].update({
-  'board' : 'x86-dogfood',
-
-  'uprev' : True,
-  'rev_overlays': 'both',
-  'push_overlays': None,
-})
-
-config['x86-pineview-bin'] = default.copy()
-config['x86-pineview-bin'].update({
-  'board' : 'x86-pineview',
-
-  'uprev' : True,
-  'rev_overlays': 'public',
-  'push_overlays': None,
-})
-
-config['arm-tegra2-bin'] = default.copy()
-config['arm-tegra2-bin'].update(arm)
-config['arm-tegra2-bin'].update({
-  'board' : 'tegra2_dev-board',
-
-  'uprev' : True,
-  'rev_overlays': 'public',
-  'push_overlays': None,
-})
-
-config['arm-generic-bin'] = default.copy()
-config['arm-generic-bin'].update(arm)
-config['arm-generic-bin'].update({
-  'board' : 'arm-generic',
-
-  'uprev' : True,
-  'rev_overlays': 'public',
-  'push_overlays': None,
-})
-
-config['arm-generic-full'] = default.copy()
-config['arm-generic-full'].update(arm)
-config['arm-generic-full'].update(full)
-config['arm-generic-full'].update({
-  'board' : 'arm-generic',
-})
-
-config['arm-tegra2-full'] = default.copy()
-config['arm-tegra2-full'].update(arm)
-config['arm-tegra2-full'].update(full)
-config['arm-tegra2-full'].update({
-  'board' : 'tegra2_dev-board',
-})
-
-config['arm-tegra2-seaboard-full'] = default.copy()
-config['arm-tegra2-seaboard-full'].update(arm)
-config['arm-tegra2-seaboard-full'].update(full)
-config['arm-tegra2-seaboard-full'].update({
-  'board' : 'tegra2_seaboard',
-})
-
-config['x86-generic-full'] = default.copy()
-config['x86-generic-full'].update(full)
-config['x86-generic-full'].update({
-  'board' : 'x86-generic',
-})
-
-config['x86-pineview-full'] = default.copy()
-config['x86-pineview-full'].update(full)
-config['x86-pineview-full'].update({
-  'board' : 'x86-pineview',
-})
-
-# TODO(dgarrett) delete when buildbot updated to use new names
-config['x86_agz_bin'] = config['x86-agz-bin']
-config['x86_dogfood_bin'] = config['x86-dogfood-bin']
-config['x86_pineview_bin'] = config['x86-pineview-bin']
-config['arm_tegra2_bin'] = config['arm-tegra2-bin']
-config['arm_generic_bin'] = config['arm-generic-bin']