ARM: Merging constants in simulator and assembler header files and other clea...

src/arm/assembler-arm.h

Index: src/arm/assembler-arm.h
===================================================================
--- src/arm/assembler-arm.h	(revision 6474)
+++ src/arm/assembler-arm.h	(working copy)
@@ -41,6 +41,7 @@
 #define V8_ARM_ASSEMBLER_ARM_H_
 #include <stdio.h>
 #include "assembler.h"
+#include "constants-arm.h"
 #include "serialize.h"
 
 namespace v8 {
@@ -300,19 +301,7 @@
 const DwVfpRegister d14 = { 14 };
 const DwVfpRegister d15 = { 15 };
 
-// VFP FPSCR constants.
-static const uint32_t kVFPNConditionFlagBit = 1 << 31;
-static const uint32_t kVFPZConditionFlagBit = 1 << 30;
-static const uint32_t kVFPCConditionFlagBit = 1 << 29;
-static const uint32_t kVFPVConditionFlagBit = 1 << 28;
 
-static const uint32_t kVFPFlushToZeroMask = 1 << 24;
-
-static const uint32_t kVFPRoundingModeMask = 3 << 22;
-static const uint32_t kVFPRoundToMinusInfinityBits = 2 << 22;
-
-static const uint32_t kVFPExceptionMask = 0xf;
-
 // Coprocessor register
 struct CRegister {
   bool is_valid() const { return 0 <= code_ && code_ < 16; }
@@ -372,150 +361,7 @@
 };
 
 
-// Condition field in instructions.
-enum Condition {
-  // any value < 0 is considered no_condition
-  no_condition  = -1,
-
-  eq =  0 << 28,  // Z set            equal.
-  ne =  1 << 28,  // Z clear          not equal.
-  nz =  1 << 28,  // Z clear          not zero.
-  cs =  2 << 28,  // C set            carry set.
-  hs =  2 << 28,  // C set            unsigned higher or same.
-  cc =  3 << 28,  // C clear          carry clear.
-  lo =  3 << 28,  // C clear          unsigned lower.
-  mi =  4 << 28,  // N set            negative.
-  pl =  5 << 28,  // N clear          positive or zero.
-  vs =  6 << 28,  // V set            overflow.
-  vc =  7 << 28,  // V clear          no overflow.
-  hi =  8 << 28,  // C set, Z clear   unsigned higher.
-  ls =  9 << 28,  // C clear or Z set unsigned lower or same.
-  ge = 10 << 28,  // N == V           greater or equal.
-  lt = 11 << 28,  // N != V           less than.
-  gt = 12 << 28,  // Z clear, N == V  greater than.
-  le = 13 << 28,  // Z set or N != V  less then or equal
-  al = 14 << 28   //                  always.
-};
-
-
-// Returns the equivalent of !cc.
-inline Condition NegateCondition(Condition cc) {
-  ASSERT(cc != al);
-  return static_cast<Condition>(cc ^ ne);
-}
-
-
-// Corresponds to transposing the operands of a comparison.
-inline Condition ReverseCondition(Condition cc) {
-  switch (cc) {
-    case lo:
-      return hi;
-    case hi:
-      return lo;
-    case hs:
-      return ls;
-    case ls:
-      return hs;
-    case lt:
-      return gt;
-    case gt:
-      return lt;
-    case ge:
-      return le;
-    case le:
-      return ge;
-    default:
-      return cc;
-  };
-}
-
-
-// Branch hints are not used on the ARM.  They are defined so that they can
-// appear in shared function signatures, but will be ignored in ARM
-// implementations.
-enum Hint { no_hint };
-
-// Hints are not used on the arm.  Negating is trivial.
-inline Hint NegateHint(Hint ignored) { return no_hint; }
-
-
 // -----------------------------------------------------------------------------
-// Addressing modes and instruction variants
-
-// Shifter operand shift operation
-enum ShiftOp {
-  LSL = 0 << 5,
-  LSR = 1 << 5,
-  ASR = 2 << 5,
-  ROR = 3 << 5,
-  RRX = -1
-};
-
-
-// Condition code updating mode
-enum SBit {
-  SetCC   = 1 << 20,  // set condition code
-  LeaveCC = 0 << 20   // leave condition code unchanged
-};
-
-
-// Status register selection
-enum SRegister {
-  CPSR = 0 << 22,
-  SPSR = 1 << 22
-};
-
-
-// Status register fields
-enum SRegisterField {
-  CPSR_c = CPSR | 1 << 16,
-  CPSR_x = CPSR | 1 << 17,
-  CPSR_s = CPSR | 1 << 18,
-  CPSR_f = CPSR | 1 << 19,
-  SPSR_c = SPSR | 1 << 16,
-  SPSR_x = SPSR | 1 << 17,
-  SPSR_s = SPSR | 1 << 18,
-  SPSR_f = SPSR | 1 << 19
-};
-
-// Status register field mask (or'ed SRegisterField enum values)
-typedef uint32_t SRegisterFieldMask;
-
-
-// Memory operand addressing mode
-enum AddrMode {
-  // bit encoding P U W
-  Offset       = (8|4|0) << 21,  // offset (without writeback to base)
-  PreIndex     = (8|4|1) << 21,  // pre-indexed addressing with writeback
-  PostIndex    = (0|4|0) << 21,  // post-indexed addressing with writeback
-  NegOffset    = (8|0|0) << 21,  // negative offset (without writeback to base)
-  NegPreIndex  = (8|0|1) << 21,  // negative pre-indexed with writeback
-  NegPostIndex = (0|0|0) << 21   // negative post-indexed with writeback
-};
-
-
-// Load/store multiple addressing mode
-enum BlockAddrMode {
-  // bit encoding P U W
-  da           = (0|0|0) << 21,  // decrement after
-  ia           = (0|4|0) << 21,  // increment after
-  db           = (8|0|0) << 21,  // decrement before
-  ib           = (8|4|0) << 21,  // increment before
-  da_w         = (0|0|1) << 21,  // decrement after with writeback to base
-  ia_w         = (0|4|1) << 21,  // increment after with writeback to base
-  db_w         = (8|0|1) << 21,  // decrement before with writeback to base
-  ib_w         = (8|4|1) << 21   // increment before with writeback to base
-};
-
-
-// Coprocessor load/store operand size
-enum LFlag {
-  Long  = 1 << 22,  // long load/store coprocessor
-  Short = 0 << 22   // short load/store coprocessor
-};
-
-
-// -----------------------------------------------------------------------------
 // Machine instruction Operands
 
 // Class Operand represents a shifter operand in data processing instructions
@@ -658,9 +504,6 @@
 };
 
 
-typedef int32_t Instr;
-
-
 extern const Instr kMovLrPc;
 extern const Instr kLdrPCMask;
 extern const Instr kLdrPCPattern;
@@ -680,15 +523,11 @@
 extern const Instr kCmpCmnMask;
 extern const Instr kCmpCmnPattern;
 extern const Instr kCmpCmnFlip;
-
-extern const Instr kALUMask;
-extern const Instr kAddPattern;
-extern const Instr kSubPattern;
-extern const Instr kAndPattern;
-extern const Instr kBicPattern;
 extern const Instr kAddSubFlip;
 extern const Instr kAndBicFlip;
 
+
+
 class Assembler : public Malloced {
  public:
   // Create an assembler. Instructions and relocation information are emitted
@@ -1001,7 +840,6 @@
   void stm(BlockAddrMode am, Register base, RegList src, Condition cond = al);
 
   // Exception-generating instructions and debugging support
-  static const int kDefaultStopCode = -1;
   void stop(const char* msg,
             Condition cond = al,
             int32_t code = kDefaultStopCode);