Pull in gmock through DEPS

testing/gmock/scripts/generator/cpp/tokenize.py

Index: testing/gmock/scripts/generator/cpp/tokenize.py
diff --git a/testing/gmock/scripts/generator/cpp/tokenize.py b/testing/gmock/scripts/generator/cpp/tokenize.py
deleted file mode 100755
index 28c334529980b540797034f90a1031001a6c0bcd..0000000000000000000000000000000000000000
--- a/testing/gmock/scripts/generator/cpp/tokenize.py
+++ /dev/null
@@ -1,287 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2007 Neal Norwitz
-# Portions Copyright 2007 Google Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Tokenize C++ source code."""
-
-__author__ = 'nnorwitz@google.com (Neal Norwitz)'
-
-
-try:
-    # Python 3.x
-    import builtins
-except ImportError:
-    # Python 2.x
-    import __builtin__ as builtins
-
-
-import sys
-
-from cpp import utils
-
-
-if not hasattr(builtins, 'set'):
-    # Nominal support for Python 2.3.
-    from sets import Set as set
-
-
-# Add $ as a valid identifier char since so much code uses it.
-_letters = 'abcdefghijklmnopqrstuvwxyz'
-VALID_IDENTIFIER_CHARS = set(_letters + _letters.upper() + '_0123456789$')
-HEX_DIGITS = set('0123456789abcdefABCDEF')
-INT_OR_FLOAT_DIGITS = set('01234567890eE-+')
-
-
-# C++0x string preffixes.
-_STR_PREFIXES = set(('R', 'u8', 'u8R', 'u', 'uR', 'U', 'UR', 'L', 'LR'))
-
-
-# Token types.
-UNKNOWN = 'UNKNOWN'
-SYNTAX = 'SYNTAX'
-CONSTANT = 'CONSTANT'
-NAME = 'NAME'
-PREPROCESSOR = 'PREPROCESSOR'
-
-# Where the token originated from.  This can be used for backtracking.
-# It is always set to WHENCE_STREAM in this code.
-WHENCE_STREAM, WHENCE_QUEUE = range(2)
-
-
-class Token(object):
-    """Data container to represent a C++ token.
-
-    Tokens can be identifiers, syntax char(s), constants, or
-    pre-processor directives.
-
-    start contains the index of the first char of the token in the source
-    end contains the index of the last char of the token in the source
-    """
-
-    def __init__(self, token_type, name, start, end):
-        self.token_type = token_type
-        self.name = name
-        self.start = start
-        self.end = end
-        self.whence = WHENCE_STREAM
-
-    def __str__(self):
-        if not utils.DEBUG:
-            return 'Token(%r)' % self.name
-        return 'Token(%r, %s, %s)' % (self.name, self.start, self.end)
-
-    __repr__ = __str__
-
-
-def _GetString(source, start, i):
-    i = source.find('"', i+1)
-    while source[i-1] == '\\':
-        # Count the trailing backslashes.
-        backslash_count = 1
-        j = i - 2
-        while source[j] == '\\':
-            backslash_count += 1
-            j -= 1
-        # When trailing backslashes are even, they escape each other.
-        if (backslash_count % 2) == 0:
-            break
-        i = source.find('"', i+1)
-    return i + 1
-
-
-def _GetChar(source, start, i):
-    # NOTE(nnorwitz): may not be quite correct, should be good enough.
-    i = source.find("'", i+1)
-    while source[i-1] == '\\':
-        # Need to special case '\\'.
-        if (i - 2) > start and source[i-2] == '\\':
-            break
-        i = source.find("'", i+1)
-    # Try to handle unterminated single quotes (in a #if 0 block).
-    if i < 0:
-        i = start
-    return i + 1
-
-
-def GetTokens(source):
-    """Returns a sequence of Tokens.
-
-    Args:
-      source: string of C++ source code.
-
-    Yields:
-      Token that represents the next token in the source.
-    """
-    # Cache various valid character sets for speed.
-    valid_identifier_chars = VALID_IDENTIFIER_CHARS
-    hex_digits = HEX_DIGITS
-    int_or_float_digits = INT_OR_FLOAT_DIGITS
-    int_or_float_digits2 = int_or_float_digits | set('.')
-
-    # Only ignore errors while in a #if 0 block.
-    ignore_errors = False
-    count_ifs = 0
-
-    i = 0
-    end = len(source)
-    while i < end:
-        # Skip whitespace.
-        while i < end and source[i].isspace():
-            i += 1
-        if i >= end:
-            return
-
-        token_type = UNKNOWN
-        start = i
-        c = source[i]
-        if c.isalpha() or c == '_':              # Find a string token.
-            token_type = NAME
-            while source[i] in valid_identifier_chars:
-                i += 1
-            # String and character constants can look like a name if
-            # they are something like L"".
-            if (source[i] == "'" and (i - start) == 1 and
-                source[start:i] in 'uUL'):
-                # u, U, and L are valid C++0x character preffixes.
-                token_type = CONSTANT
-                i = _GetChar(source, start, i)
-            elif source[i] == "'" and source[start:i] in _STR_PREFIXES:
-                token_type = CONSTANT
-                i = _GetString(source, start, i)
-        elif c == '/' and source[i+1] == '/':    # Find // comments.
-            i = source.find('\n', i)
-            if i == -1:  # Handle EOF.
-                i = end
-            continue
-        elif c == '/' and source[i+1] == '*':    # Find /* comments. */
-            i = source.find('*/', i) + 2
-            continue
-        elif c in ':+-<>&|*=':                   # : or :: (plus other chars).
-            token_type = SYNTAX
-            i += 1
-            new_ch = source[i]
-            if new_ch == c:
-                i += 1
-            elif c == '-' and new_ch == '>':
-                i += 1
-            elif new_ch == '=':
-                i += 1
-        elif c in '()[]{}~!?^%;/.,':             # Handle single char tokens.
-            token_type = SYNTAX
-            i += 1
-            if c == '.' and source[i].isdigit():
-                token_type = CONSTANT
-                i += 1
-                while source[i] in int_or_float_digits:
-                    i += 1
-                # Handle float suffixes.
-                for suffix in ('l', 'f'):
-                    if suffix == source[i:i+1].lower():
-                        i += 1
-                        break
-        elif c.isdigit():                        # Find integer.
-            token_type = CONSTANT
-            if c == '0' and source[i+1] in 'xX':
-                # Handle hex digits.
-                i += 2
-                while source[i] in hex_digits:
-                    i += 1
-            else:
-                while source[i] in int_or_float_digits2:
-                    i += 1
-            # Handle integer (and float) suffixes.
-            for suffix in ('ull', 'll', 'ul', 'l', 'f', 'u'):
-                size = len(suffix)
-                if suffix == source[i:i+size].lower():
-                    i += size
-                    break
-        elif c == '"':                           # Find string.
-            token_type = CONSTANT
-            i = _GetString(source, start, i)
-        elif c == "'":                           # Find char.
-            token_type = CONSTANT
-            i = _GetChar(source, start, i)
-        elif c == '#':                           # Find pre-processor command.
-            token_type = PREPROCESSOR
-            got_if = source[i:i+3] == '#if' and source[i+3:i+4].isspace()
-            if got_if:
-                count_ifs += 1
-            elif source[i:i+6] == '#endif':
-                count_ifs -= 1
-                if count_ifs == 0:
-                    ignore_errors = False
-
-            # TODO(nnorwitz): handle preprocessor statements (\ continuations).
-            while 1:
-                i1 = source.find('\n', i)
-                i2 = source.find('//', i)
-                i3 = source.find('/*', i)
-                i4 = source.find('"', i)
-                # NOTE(nnorwitz): doesn't handle comments in #define macros.
-                # Get the first important symbol (newline, comment, EOF/end).
-                i = min([x for x in (i1, i2, i3, i4, end) if x != -1])
-
-                # Handle #include "dir//foo.h" properly.
-                if source[i] == '"':
-                    i = source.find('"', i+1) + 1
-                    assert i > 0
-                    continue
-                # Keep going if end of the line and the line ends with \.
-                if not (i == i1 and source[i-1] == '\\'):
-                    if got_if:
-                        condition = source[start+4:i].lstrip()
-                        if (condition.startswith('0') or
-                            condition.startswith('(0)')):
-                            ignore_errors = True
-                    break
-                i += 1
-        elif c == '\\':                          # Handle \ in code.
-            # This is different from the pre-processor \ handling.
-            i += 1
-            continue
-        elif ignore_errors:
-            # The tokenizer seems to be in pretty good shape.  This
-            # raise is conditionally disabled so that bogus code
-            # in an #if 0 block can be handled.  Since we will ignore
-            # it anyways, this is probably fine.  So disable the
-            # exception and  return the bogus char.
-            i += 1
-        else:
-            sys.stderr.write('Got invalid token in %s @ %d token:%s: %r\n' %
-                             ('?', i, c, source[i-10:i+10]))
-            raise RuntimeError('unexpected token')
-
-        if i <= 0:
-            print('Invalid index, exiting now.')
-            return
-        yield Token(token_type, source[start:i], start, i)
-
-
-if __name__ == '__main__':
-    def main(argv):
-        """Driver mostly for testing purposes."""
-        for filename in argv[1:]:
-            source = utils.ReadFile(filename)
-            if source is None:
-                continue
-
-            for token in GetTokens(source):
-                print('%-12s: %s' % (token.token_type, token.name))
-                # print('\r%6.2f%%' % (100.0 * index / token.end),)
-            sys.stdout.write('\n')
-
-
-    main(sys.argv)