Check in tofactory script.

scripts/image_signing/tofactory.sh

+#!/bin/sh
+#
+# Copyright (c) 2010 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+#
+# This script converts a Chrome OS device to a pre-factory-install state:
+#  * Firmware write protect disabled
+#  * H2O BIOS, with RO VPD area copied from the current BIOS
+#  * Original EC firmware
+#  * Blank SSD (no GPT)
+#
+# Minimal usage:
+#   tofactory.sh -b H2OBIOS.bin -e ec_shellball.sh
+
+SCRIPT_BASE="$(dirname "$0")"
+. "$SCRIPT_BASE/common.sh"
+load_shflags || exit 1
+
+# Constants used by DEFINE_*
+VBOOT_BASE='/usr/share/vboot'
+
+# DEFINE_string name default_value description flag
+DEFINE_string bios "" "Path of system firmware (BIOS) binary to write" "b"
+DEFINE_string ec "" "Path of EC shellball to execute" "e"
+DEFINE_string backup_dir "" "Path of directory in whoch to store backups" "k"
+DEFINE_string asset_tag "unspecified_tag" \
+  "Asset tag of device, used to name backups" "a"
+DEFINE_string ssd "/dev/sda" "Path to SSD / target drive" "s"
+DEFINE_boolean wipe_ssd $FLAGS_TRUE "Wipe SSD after firmware updates" ""
+DEFINE_boolean nothing $FLAGS_FALSE \
+  "Print commands but do not modify device" "n"
+
+# Parse command line
+FLAGS "$@" || exit 1
+eval set -- "$FLAGS_ARGV"
+
+# Globals
+# ----------------------------------------------------------------------------
+set -e
+
+# Flashrom commands with device overrides
+FLASHROM_BIOS="flashrom -p internal:bus=spi"
+FLASHROM_EC="flashrom -p internal:bus=lpc"
+
+# A log file to keep the output results of executed command
+EXEC_LOG="$(make_temp_file)"
+
+# Temporary Work directory
+WORK_DIR="$(make_temp_dir)"
+OLD_BIOS="$WORK_DIR/old_bios.bin"
+NEW_BIOS="$WORK_DIR/new_bios.bin"
+
+# Functions
+# ----------------------------------------------------------------------------
+
+# Error message for write protect disable failure, with reminder
+wp_error() {
+  local which_rom=$1
+  shift
+  echo "ERROR: Unable to disable $which_rom write protect: $*" 1>&2
+  echo "Is hardware write protect still enabled?" 1>&2
+  exit 1
+}
+
+# Disable write protect for an EEPROM
+disable_wp() {
+  local which_rom=$1  # EC or BIOS
+  shift
+  local flash_rom="$*"  # Flashrom command to use
+
+  debug_msg "Disabling $which_rom write protect"
+  $NOTHING ${flash_rom} --wp-disable || wp_error "$which_rom" "--wp-disable"
+  $NOTHING ${flash_rom} --wp-range 0 0 || wp_error "$which_rom" "--wp-range"
+
+  # WP status bits should report WP: status: 0x00
+  local wp_status="$(${flash_rom} --wp-status | grep "WP: status:")"
+  if [ "$wp_status" != "WP: status: 0x00" ]; then
+    if [ "$FLAGS_nothing" = $FLAGS_FALSE ]; then
+      wp_error "$which_rom" "$wp_status"
+    fi
+  fi
+}
+
+# Back up current firmware and partition table
+make_backups() {
+  debug_msg "Backing up current firmware to $FLAGS_backup_dir"
+  mkdir -p "$FLAGS_backup_dir"
+  cp "$OLD_BIOS" "$FLAGS_backup_dir/$FLAGS_asset_tag.bios.bin"
+  ${FLASHROM_EC} -r "$FLAGS_backup_dir/$FLAGS_asset_tag.ec.bin"
+
+  # Copy the VPD info from RAM, since we can't extract it as text
+  # from the BIOS binary.  Failure of this is only a warning, since
+  # the information is still in the old BIOS.
+  mosys vpd print all > "$FLAGS_backup_dir/$FLAGS_asset_tag.vpd.txt" ||
+    echo "WARNING: unable to save VPD as text."
+
+  # Copy the first part of the drive, so we can recreate the partition
+  # table.
+  local gpt_backup="$FLAGS_backup_dir/$FLAGS_asset_tag.gpt.bin"
+  debug_msg "Backing up current GPT table."
+  dd if="$FLAGS_ssd" of="$gpt_backup" bs=512 count=34
+
+  # Add a script to restore the BIOS and GPT
+  local restore_script="$FLAGS_backup_dir/$FLAGS_asset_tag.restore.sh"
+  cat >"$restore_script" <<EOF
+#!/bin/sh
+echo "Restoring BIOS"
+${FLASHROM_BIOS} -w "$FLAGS_asset_tag.bios.bin"
+echo "Restoring EC"
+${FLASHROM_EC} -w "$FLAGS_asset_tag.ec.bin"
+echo "Restoring GPT"
+dd of="$FLAGS_ssd" if="$FLAGS_asset_tag.gpt.bin" conv=notrunc
+EOF
+  echo "To restore original BIOS and SSD:"
+  echo "  cd $FLAGS_backup_dir && sh $FLAGS_asset_tag.restore.sh"
+}
+
+# Main
+# ----------------------------------------------------------------------------
+
+main() {
+  # Make sure the files we were passed exist
+  [ -n "$FLAGS_bios" ] || err_die "Please specify a BIOS file (-b bios.bin)"
+  [ -n "$FLAGS_ec" ] || err_die "Please specify an EC updater (-e updater.sh)"
+  ensure_files_exist "$FLAGS_bios" "$FLAGS_ec" || exit 1
+
+  # If --nothing was specified, keep flashrom from writing
+  if [ "$FLAGS_nothing" = $FLAGS_TRUE ]; then
+    NOTHING="echo Not executing: "
+  fi
+
+  # Stop update engine before calling flashrom.  Multiple copies of flashrom
+  # interfere with each other.
+  debug_msg "Stopping update engine"
+  initctl stop update-engine
+
+  # Read the current firmware
+  debug_msg "Reading BIOS from EEPROM"
+  ${FLASHROM_BIOS} -r "$OLD_BIOS"
+
+  # Copy current info to the backup dir, if specified
+  if [ -n "$FLAGS_backup_dir" ]; then
+    make_backups
+  fi
+
+  # Find the RO VPD area in the current firmware
+  local t="$(mosys -k eeprom map "$OLD_BIOS" | grep 'RO VPD')"
+  local vpd_offset="$(echo $t | sed 's/.*area_offset="\([^"]*\)" .*/\1/' )"
+  local vpd_size="$(echo $t | sed 's/.*area_size="\([^"]*\)" .*/\1/' )"
+  debug_msg "Found VPD at offset $vpd_offset size $vpd_size"
+  # Convert offset and size to decimal, since dd doesn't grok hex
+  vpd_offset="$(printf "%d" $vpd_offset)"
+  vpd_size="$(printf "%d" $vpd_size)"
+  debug_msg "In decimal, VPD is at offset $vpd_offset size $vpd_size"
+
+  # Copy the RO VPD from the old firmware to the new firmware
+  debug_msg "Copying VPD from old firmware to new firmware"
+  cp "$FLAGS_bios" "$NEW_BIOS"
+  dd bs=1 seek=$vpd_offset skip=$vpd_offset count=$vpd_size conv=notrunc \
+    if="$OLD_BIOS" of="$NEW_BIOS" || err_die "Unable to copy RO VPD"
+
+  # Disable write protect
+  disable_wp "EC" ${FLASHROM_EC}
+  disable_wp "BIOS" ${FLASHROM_BIOS}
+
+  # Write new firmware
+  debug_msg "Writing EC"
+  # TODO: if EC file ends in .bin, use flashrom to write it directly?
+  $NOTHING sh "$FLAGS_ec" --factory || err_die "Unable to write EC"
+  debug_msg "Writing BIOS"
+  $NOTHING ${FLASHROM_BIOS} -w "$NEW_BIOS" || err_die "Unable to write BIOS"
+
+  # Wipe SSD
+  if [ "$FLAGS_wipe_ssd" = $FLAGS_TRUE ]; then
+    debug_msg "Wiping SSD"
+    $NOTHING cgpt create -z "$FLAGS_ssd" || err_die "Unable to wipe SSD"
+  fi
+
+  # Leave the update engine stopped.  We've mucked with the firmware
+  # and SSD contents, so we shouldn't be attempting an autoupdate this
+  # boot anyway.
+}
+
+main