Add new testing framework along with a few micro-tests.

util/partial_writes_ec.sh

+#!/bin/sh
+#
+# Copyright (C) 2010 Google Inc.
+# Written by David Hendricks for Google Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+# ec.sh: This will attempt to stress partial write capabilities for EC firmware
+# ROMs. There are two major parts to the test:
+# 1. Write an alternative firmware image to the "fw" region specified in a
+#    layout file.
+# 2. Stress partial writes using a known pattern in an unused region of the
+#    EC firmware ROM with 128KB of space.
+#
+# REQUIRED ENVIRONMENT VARIABLES
+# ------------------------------
+# Due to the way the test framework copies tests to a temporary location, the
+# environment variables must specify absolute paths to files they reference.
+#
+# $ALT_EC_IMAGE -- Required environment variable
+# This script requires an alternative EC firmware. Most ECs actively read code
+# and data from the firmware ROM during run-time. An example of an EC firmware
+# update process for supported ECs:
+# 1. Enter update mode -- Copy relevant code and data to internal RAM
+# 2. Enable programming interface
+# 3. When host is done programming ROM, issue "exit update mode"
+# 4. Re-load code/data from ROM.
+#
+# Step 4 can cause failure if we attempt to test using patterns. Instead, we
+# must provide the EC with usable code. For blackbox testing, this essentially
+# means replacing the current firmware image with a different image which still
+# works.
+#
+# $LAYOUT_FILE -- Another required environment variable
+# A layout file is required for two reasons:
+# 1. We need a way of knowing which regions are safe to leave in a clobbered
+#    state after exiting flash update mode. They will be labeled "unused".
+# 2. We need a way of knowing where the EC firmware resides since some ECs
+#    boot from bottom of ROM and others from top of ROM. This will be the
+#    region labeled "fw"
+#
+# The following example is for a 1MB ROM with 128KB occupied by EC firmware.
+# The EC in this example loads firmware from the lowest address.
+# 0x000000 0x01ffff fw
+# 0x020000 0x0fffff unused
+
+LOGFILE="${0}.log"
+ZERO_4K="00_4k.bin"
+FF_4K="ff_4k.bin"
+FF_4K_TEXT="ff_4k.txt"
+NUM_REGIONS=16
+
+TESTFILE="test.bin"
+
+partial_writes_ec_fail()
+{
+        echo "$1" >> ${LOGFILE}
+        echo "$0: failed" >> ${LOGFILE}
+        exit ${EXIT_FAILURE}
+}
+
+which uuencode > /dev/null
+if [ "$?" != "0" ] ; then
+        partial_writes_ec_fail "uuencode is required to use this script"
+fi
+
+# FIXME: This is a chromium os -ism. Most distros don't strip out "diff".
+which diff > /dev/null
+if [ "$?" != "0" ] ; then
+        partial_writes_ec_fail "diff is required to use this script"
+fi
+
+# FIXME: extra chromium os paranoia
+which printf > /dev/null
+if [ "$?" != "0" ] ; then
+        partial_writes_ec_fail "printf is required to use this script"
+fi
+
+echo "User-provided \$ALT_EC_IMAGE: ${ALT_EC_IMAGE}" >> ${LOGFILE}
+if [ -z "$ALT_EC_IMAGE" ] || [ ! -e "$ALT_EC_IMAGE" ]; then
+        partial_writes_ec_fail "Please provide absolute path to alternate EC firmware image using the ALT_EC_IMAGE environment variable."
+fi
+
+echo "User-provided \$LAYOUT_FILE: ${LAYOUT_FILE}" >> ${LOGFILE}
+if [ -z "$LAYOUT_FILE" ] || [ ! -e "$LAYOUT_FILE" ]; then
+        partial_writes_ec_fail "Please provide absolute path to layout file using the LAYOUT_FILE environment variable"
+fi
+
+#
+# Part 1: Write an alternate firmware image to the "fw" region in EC flash
+#
+
+./flashrom ${FLASHROM_PARAM} -l ${LAYOUT_FILE} -i fw -w "${ALT_EC_IMAGE}" 2> /dev/null
+if [ $? -ne 0 ]; then
+        partial_writes_ec_fail "Failed to write alternate EC firmware" >> ${LOGFILE}
+else
+        echo "Wrote alternate EC firmware image successfully" >> ${LOGFILE}
+fi
+
+# Restore original firmware region
+./flashrom ${FLASHROM_PARAM} -l ${LAYOUT_FILE} -i fw -w "${BACKUP}" 2> /dev/null
+if [ $? -ne 0 ]; then
+        partial_writes_ec_fail "Failed to restore original EC firmware" >> ${LOGFILE}
+else
+        echo "Restored original firmware image successfully" >> ${LOGFILE}
+fi
+
+#
+# Part 2: Write a pattern to an "unused" region in EC flash
+#
+
+ranges=$(awk '{ if ( $2 == "unused" ) print $1 }' "${LAYOUT_FILE}")
+range_found=0
+for range in $ranges; do
+        start=$(echo $range | awk -F":" '{ print $1 }')
+        end=$(echo $range | awk -F":" '{ print $2 }')
+        len=$((${end} - ${start}))
+
+        echo "Testing if range is usable: ${start}:${end}, len=${len}" >> ${LOGFILE}
+        if [ ${len} -lt $(($((${NUM_REGIONS} - 1)) * 4096)) ]; then
+                continue
+        else
+                range_found=1
+                break
+        fi
+done
+
+if [ $range_found -ne 1 ]; then
+        partial_writes_ec_fail "No suitable unused range found"
+else
+        echo "Found usable range: ${start}:${end}, len=${len}"
+fi
+
+# Make 4k worth of 0xff bytes
+echo "begin 640 $FF_4K" > "$FF_4K_TEXT"
+i=0
+while [ $i -le 90 ]; do
+        echo "M____________________________________________________________" >> "$FF_4K_TEXT"
+        i=$((${i} + 1))
+done
+echo "!_P``" >> "$FF_4K_TEXT"
+echo "\`" >> "$FF_4K_TEXT"
+echo "end" >> "$FF_4K_TEXT"
+uudecode -o "$FF_4K" "$FF_4K_TEXT"
+rm -f "$FF_4K_TEXT"
+
+# Make 4k worth of 0x00 bytes
+dd if=/dev/zero of="$ZERO_4K" bs=1 count=4096 2> /dev/null
+echo "ffh pattern written in ${FF_4K}"
+echo "00h pattern written in ${ZERO_4K}"
+
+# Actual tests are performed below.
+#
+
+# Make a layout - 4K regions on 4K boundaries. This will test basic
+# functionality of erasing and writing specific blocks.
+for i in `seq 0 $((${NUM_REGIONS} - 1))` ; do
+        offset_00=$((${i} * 8192))
+        offset_ff=$((${i} * 8192 + 4096))
+        echo "\
+`printf 0x%x $((${start} + ${offset_00}))`:`printf 0x%x $((${start} + ${offset_00} + 0xfff))` 00_${i}
+`printf 0x%x $((${start} + ${offset_ff}))`:`printf 0x%x $((${start} + ${offset_ff} + 0xfff))` ff_${i}
+        " >> layout_ec_4k_aligned.txt
+done
+
+cp "${BACKUP}" "$TESTFILE"
+i=0
+while [ $i -lt $NUM_REGIONS ] ; do
+        tmpstr="aligned region ${i} test: "
+        offset=$((${start} + $((${i} * 8192))))
+        dd if=${ZERO_4K} of=${TESTFILE} bs=1 conv=notrunc seek=${offset} 2> /dev/null
+        dd if=${FF_4K} of=${TESTFILE} bs=1 conv=notrunc seek=$((${offset} + 4096)) 2> /dev/null
+
+        ./flashrom ${FLASHROM_PARAM} -l layout_ec_4k_aligned.txt -i 00_${i} -i ff_${i} -w "$TESTFILE" 2> /dev/null
+        if [ "$?" != "0" ] ; then
+                partial_writes_ec_fail "${tmpstr}failed to flash"
+        fi
+
+        # download the entire ROM image and use diff to compare to ensure
+        # flashrom logic does not violate user-specified regions
+        flashrom ${FLASHROM_PARAM} -r difftest.bin 2> /dev/null
+        diff -q difftest.bin "$TESTFILE"
+        if [ "$?" != "0" ] ; then
+                partial_writes_ec_fail "${tmpstr}failed diff test"
+        fi
+        rm -f difftest.bin
+
+        i=$((${i} + 1))
+        echo "${tmpstr}passed" >> ${LOGFILE}
+done
+
+# Make a layout - 4K regions on 4.5K boundaries. This will help find problems
+# with logic that only operates on part of a block. For example, if a user
+# wishes to re-write a fraction of a block, then:
+# 1. The whole block must be erased.
+# 2. The old content must be restored at unspecified offsets.
+# 3. The new content must be written at specified offsets.
+#
+# Note: The last chunk of 0xff bytes is too long, so special logic was added to
+# below to avoid overrunning a 128KB test region.
+#
+for i in `seq 0 $((${NUM_REGIONS} - 1))` ; do
+        offset_00=$((${i} * 8192 + 2048))
+        offset_ff=$((${i} * 8192 + 4096 + 2048))
+        echo "\
+`printf 0x%06x $((${start} + ${offset_00}))`:`printf 0x%06x $((${start} + ${offset_00} + 0xfff))` 00_${i}
+`printf 0x%06x $((${start} + ${offset_ff}))`:`printf 0x%06x $((${start} + ${offset_ff} + 0xfff))` ff_${i}
+        " >> layout_ec_unaligned.txt
+done
+
+# reset the test file and ROM to the original state
+flashrom ${FLASHROM_PARAM} -w "${BACKUP}" > /dev/null
+cp "$BACKUP" "$TESTFILE"
+
+i=0
+while [ $i -lt $NUM_REGIONS ] ; do
+        tmpstr="unaligned region ${i} test: "
+        offset=$(($((${i} * 8192)) + 2048))
+
+        # Protect against too long write
+        writelen=4096
+        if [ $((${offset} + 4096 + 4096)) -ge 131072 ]; then
+                writelen=$((131072 - $((${offset} + 4096))))
+                if [ ${writelen} -lt 0 ]; then
+                        writelen=0
+                fi
+        fi
+
+        dd if=${ZERO_4K} of=${TESTFILE} bs=1 conv=notrunc seek=$((${start} + ${offset})) 2> /dev/null
+        dd if=${FF_4K} of=${TESTFILE} bs=1 conv=notrunc seek=$((${start} + ${offset} + 4096)) count=writelen 2> /dev/null
+
+        ./flashrom ${FLASHROM_PARAM} -l layout_ec_unaligned.txt -i 00_${i} -i ff_${i} -w "$TESTFILE" 2> /dev/null
+        if [ "$?" != "0" ] ; then
+                partial_writes_ec_fail "${tmpstr}failed to flash region"
+        fi
+
+        # download the entire ROM image and use diff to compare to ensure
+        # flashrom logic does not violate user-specified regions
+        flashrom ${FLASHROM_PARAM} -r difftest.bin 2> /dev/null
+        diff -q difftest.bin "$TESTFILE"
+        if [ "$?" != "0" ] ; then
+                partial_writes_ec_fail "${tmpstr}failed diff test"
+        fi
+        rm -f difftest.bin
+
+        i=$((${i} + 1))
+        echo "${tmpstr}passed" >> ${LOGFILE}
+done
+
+return "$EXIT_SUCCESS"