Index: client/tests/kvm/address_pools.cfg.sample |
diff --git a/client/tests/kvm/address_pools.cfg.sample b/client/tests/kvm/address_pools.cfg.sample |
deleted file mode 100644 |
index b5967ceabfd94c5c82f9183c76784c795d3b3db9..0000000000000000000000000000000000000000 |
--- a/client/tests/kvm/address_pools.cfg.sample |
+++ /dev/null |
@@ -1,65 +0,0 @@ |
-# Copy this file to address_pools.cfg and edit it. |
-# |
-# This file specifies several MAC-IP ranges for each host in the network that |
-# may run KVM tests. A MAC address must not be used twice, so these ranges |
-# must not overlap. The VMs running on each host will only use MAC addresses |
-# from the pool of that host. |
-# If you wish to use a static MAC-IP mapping, where each MAC address range is |
-# mapped to a known corresponding IP address range, specify the bases of the IP |
-# address ranges in this file. |
-# If you specify a MAC address range without a corresponding IP address range, |
-# the IP addresses for that range will be determined at runtime by listening |
-# to DHCP traffic using tcpdump. |
-# If you wish to determine IP addresses using tcpdump in any case, regardless |
-# of any # IP addresses specified in this file, uncomment the following line: |
-#always_use_tcpdump = yes |
-# You may also specify this parameter for specific hosts by adding it in the |
-# appropriate sections below. |
- |
-variants: |
- # Rename host1 to an actual (short) hostname in the network that will be running the Autotest client |
- - @host1: |
- # Add/remove ranges here |
- address_ranges = r1 r2 |
- |
- # Modify the following parameters to reflect the DHCP server's configuration |
- address_range_base_mac_r1 = 52:54:00:12:35:56 |
- #address_range_base_ip_r1 = 10.0.2.20 |
- address_range_size_r1 = 16 |
- |
- # Modify the following parameters to reflect the DHCP server's configuration |
- address_range_base_mac_r2 = 52:54:00:12:35:80 |
- #address_range_base_ip_r2 = 10.0.2.40 |
- address_range_size_r2 = 16 |
- |
- # Rename host2 to an actual (short) hostname in the network that will be running the Autotest client |
- - @host2: |
- # Add/remove ranges here |
- address_ranges = r1 r2 |
- |
- # Modify the following parameters to reflect the DHCP server's configuration |
- address_range_base_mac_r1 = 52:54:00:12:36:56 |
- #address_range_base_ip_r1 = 10.0.3.20 |
- address_range_size_r1 = 16 |
- |
- # Modify the following parameters to reflect the DHCP server's configuration |
- address_range_base_mac_r2 = 52:54:00:12:36:80 |
- #address_range_base_ip_r2 = 10.0.3.40 |
- address_range_size_r2 = 16 |
- |
- # Add additional hosts here... |
- |
- # This will be used for hosts that do not appear on the list |
- - @default_host: |
- # Add/remove ranges here |
- address_ranges = r1 r2 |
- |
- # Modify the following parameters to reflect the DHCP server's configuration |
- address_range_base_mac_r1 = 52:54:00:12:34:56 |
- #address_range_base_ip_r1 = 10.0.1.20 |
- address_range_size_r1 = 16 |
- |
- # Modify the following parameters to reflect the DHCP server's configuration |
- address_range_base_mac_r2 = 52:54:00:12:34:80 |
- #address_range_base_ip_r2 = 10.0.1.40 |
- address_range_size_r2 = 16 |