| OLD | NEW |
|---|
| (Empty) |
| 1 # Copy this file to address_pools.cfg and edit it. | |
| 2 # | |
| 3 # This file specifies several MAC-IP ranges for each host in the network that | |
| 4 # may run KVM tests. A MAC address must not be used twice, so these ranges | |
| 5 # must not overlap. The VMs running on each host will only use MAC addresses | |
| 6 # from the pool of that host. | |
| 7 # If you wish to use a static MAC-IP mapping, where each MAC address range is | |
| 8 # mapped to a known corresponding IP address range, specify the bases of the IP | |
| 9 # address ranges in this file. | |
| 10 # If you specify a MAC address range without a corresponding IP address range, | |
| 11 # the IP addresses for that range will be determined at runtime by listening | |
| 12 # to DHCP traffic using tcpdump. | |
| 13 # If you wish to determine IP addresses using tcpdump in any case, regardless | |
| 14 # of any # IP addresses specified in this file, uncomment the following line: | |
| 15 #always_use_tcpdump = yes | |
| 16 # You may also specify this parameter for specific hosts by adding it in the | |
| 17 # appropriate sections below. | |
| 18 | |
| 19 variants: | |
| 20 # Rename host1 to an actual (short) hostname in the network that will be run
ning the Autotest client | |
| 21 - @host1: | |
| 22 # Add/remove ranges here | |
| 23 address_ranges = r1 r2 | |
| 24 | |
| 25 # Modify the following parameters to reflect the DHCP server's configura
tion | |
| 26 address_range_base_mac_r1 = 52:54:00:12:35:56 | |
| 27 #address_range_base_ip_r1 = 10.0.2.20 | |
| 28 address_range_size_r1 = 16 | |
| 29 | |
| 30 # Modify the following parameters to reflect the DHCP server's configura
tion | |
| 31 address_range_base_mac_r2 = 52:54:00:12:35:80 | |
| 32 #address_range_base_ip_r2 = 10.0.2.40 | |
| 33 address_range_size_r2 = 16 | |
| 34 | |
| 35 # Rename host2 to an actual (short) hostname in the network that will be run
ning the Autotest client | |
| 36 - @host2: | |
| 37 # Add/remove ranges here | |
| 38 address_ranges = r1 r2 | |
| 39 | |
| 40 # Modify the following parameters to reflect the DHCP server's configura
tion | |
| 41 address_range_base_mac_r1 = 52:54:00:12:36:56 | |
| 42 #address_range_base_ip_r1 = 10.0.3.20 | |
| 43 address_range_size_r1 = 16 | |
| 44 | |
| 45 # Modify the following parameters to reflect the DHCP server's configura
tion | |
| 46 address_range_base_mac_r2 = 52:54:00:12:36:80 | |
| 47 #address_range_base_ip_r2 = 10.0.3.40 | |
| 48 address_range_size_r2 = 16 | |
| 49 | |
| 50 # Add additional hosts here... | |
| 51 | |
| 52 # This will be used for hosts that do not appear on the list | |
| 53 - @default_host: | |
| 54 # Add/remove ranges here | |
| 55 address_ranges = r1 r2 | |
| 56 | |
| 57 # Modify the following parameters to reflect the DHCP server's configura
tion | |
| 58 address_range_base_mac_r1 = 52:54:00:12:34:56 | |
| 59 #address_range_base_ip_r1 = 10.0.1.20 | |
| 60 address_range_size_r1 = 16 | |
| 61 | |
| 62 # Modify the following parameters to reflect the DHCP server's configura
tion | |
| 63 address_range_base_mac_r2 = 52:54:00:12:34:80 | |
| 64 #address_range_base_ip_r2 = 10.0.1.40 | |
| 65 address_range_size_r2 = 16 | |
| OLD | NEW |
|---|
Chromium Code Reviews
Issue 4823005:
Merge remote branch 'cros/upstream' into tempbranch (Closed)
Base URL: http://git.chromium.org/git/autotest.git@master