Adds libjpeg-turbo to deps...

third_party/libjpeg_turbo/jddctmgr.c

+/*
+ * jddctmgr.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the inverse-DCT management logic.
+ * This code selects a particular IDCT implementation to be used,
+ * and it performs related housekeeping chores.  No code in this file
+ * is executed per IDCT step, only during output pass setup.
+ *
+ * Note that the IDCT routines are responsible for performing coefficient
+ * dequantization as well as the IDCT proper.  This module sets up the
+ * dequantization multiplier table needed by the IDCT routine.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"               /* Private declarations for DCT subsystem */
+#include "jsimddct.h"
+
+
+/*
+ * The decompressor input side (jdinput.c) saves away the appropriate
+ * quantization table for each component at the start of the first scan
+ * involving that component.  (This is necessary in order to correctly
+ * decode files that reuse Q-table slots.)
+ * When we are ready to make an output pass, the saved Q-table is converted
+ * to a multiplier table that will actually be used by the IDCT routine.
+ * The multiplier table contents are IDCT-method-dependent.  To support
+ * application changes in IDCT method between scans, we can remake the
+ * multiplier tables if necessary.
+ * In buffered-image mode, the first output pass may occur before any data
+ * has been seen for some components, and thus before their Q-tables have
+ * been saved away.  To handle this case, multiplier tables are preset
+ * to zeroes; the result of the IDCT will be a neutral gray level.
+ */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_inverse_dct pub;  /* public fields */
+
+  /* This array contains the IDCT method code that each multiplier table
+   * is currently set up for, or -1 if it's not yet set up.
+   * The actual multiplier tables are pointed to by dct_table in the
+   * per-component comp_info structures.
+   */
+  int cur_method[MAX_COMPONENTS];
+} my_idct_controller;
+
+typedef my_idct_controller * my_idct_ptr;
+
+
+/* Allocated multiplier tables: big enough for any supported variant */
+
+typedef union {
+  ISLOW_MULT_TYPE islow_array[DCTSIZE2];
+#ifdef DCT_IFAST_SUPPORTED
+  IFAST_MULT_TYPE ifast_array[DCTSIZE2];
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  FLOAT_MULT_TYPE float_array[DCTSIZE2];
+#endif
+} multiplier_table;
+
+
+/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
+ */
+#ifdef DCT_ISLOW_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef IDCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#endif
+#endif
+
+
+/*
+ * Prepare for an output pass.
+ * Here we select the proper IDCT routine for each component and build
+ * a matching multiplier table.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
+  int ci, i;
+  jpeg_component_info *compptr;
+  int method = 0;
+  inverse_DCT_method_ptr method_ptr = NULL;
+  JQUANT_TBL * qtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Select the proper IDCT routine for this component's scaling */
+    switch (compptr->DCT_scaled_size) {
+#ifdef IDCT_SCALING_SUPPORTED
+    case 1:
+      method_ptr = jpeg_idct_1x1;
+      method = JDCT_ISLOW;      /* jidctred uses islow-style table */
+      break;
+    case 2:
+      if (jsimd_can_idct_2x2())
+        method_ptr = jsimd_idct_2x2;
+      else
+        method_ptr = jpeg_idct_2x2;
+      method = JDCT_ISLOW;      /* jidctred uses islow-style table */
+      break;
+    case 4:
+      if (jsimd_can_idct_4x4())
+        method_ptr = jsimd_idct_4x4;
+      else
+        method_ptr = jpeg_idct_4x4;
+      method = JDCT_ISLOW;      /* jidctred uses islow-style table */
+      break;
+#endif
+    case DCTSIZE:
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+        if (jsimd_can_idct_islow())
+          method_ptr = jsimd_idct_islow;
+        else
+          method_ptr = jpeg_idct_islow;
+        method = JDCT_ISLOW;
+        break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+        if (jsimd_can_idct_ifast())
+          method_ptr = jsimd_idct_ifast;
+        else
+          method_ptr = jpeg_idct_ifast;
+        method = JDCT_IFAST;
+        break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+        if (jsimd_can_idct_float())
+          method_ptr = jsimd_idct_float;
+        else
+          method_ptr = jpeg_idct_float;
+        method = JDCT_FLOAT;
+        break;
+#endif
+      default:
+        ERREXIT(cinfo, JERR_NOT_COMPILED);
+        break;
+      }
+      break;
+    default:
+      ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size);
+      break;
+    }
+    idct->pub.inverse_DCT[ci] = method_ptr;
+    /* Create multiplier table from quant table.
+     * However, we can skip this if the component is uninteresting
+     * or if we already built the table.  Also, if no quant table
+     * has yet been saved for the component, we leave the
+     * multiplier table all-zero; we'll be reading zeroes from the
+     * coefficient controller's buffer anyway.
+     */
+    if (! compptr->component_needed || idct->cur_method[ci] == method)
+      continue;
+    qtbl = compptr->quant_table;
+    if (qtbl == NULL)           /* happens if no data yet for component */
+      continue;
+    idct->cur_method[ci] = method;
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
+    case JDCT_ISLOW:
+      {
+        /* For LL&M IDCT method, multipliers are equal to raw quantization
+         * coefficients, but are stored as ints to ensure access efficiency.
+         */
+        ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
+        for (i = 0; i < DCTSIZE2; i++) {
+          ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
+        }
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+        /* For AA&N IDCT method, multipliers are equal to quantization
+         * coefficients scaled by scalefactor[row]*scalefactor[col], where
+         *   scalefactor[0] = 1
+         *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+         * For integer operation, the multiplier table is to be scaled by
+         * IFAST_SCALE_BITS.
+         */
+        IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
+#define CONST_BITS 14
+        static const INT16 aanscales[DCTSIZE2] = {
+          /* precomputed values scaled up by 14 bits */
+          16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+          22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+          21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+          19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+          16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+          12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+           8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+           4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+        };
+        SHIFT_TEMPS
+
+        for (i = 0; i < DCTSIZE2; i++) {
+          ifmtbl[i] = (IFAST_MULT_TYPE)
+            DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+                                  (INT32) aanscales[i]),
+                    CONST_BITS-IFAST_SCALE_BITS);
+        }
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+        /* For float AA&N IDCT method, multipliers are equal to quantization
+         * coefficients scaled by scalefactor[row]*scalefactor[col], where
+         *   scalefactor[0] = 1
+         *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+         */
+        FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
+        int row, col;
+        static const double aanscalefactor[DCTSIZE] = {
+          1.0, 1.387039845, 1.306562965, 1.175875602,
+          1.0, 0.785694958, 0.541196100, 0.275899379
+        };
+
+        i = 0;
+        for (row = 0; row < DCTSIZE; row++) {
+          for (col = 0; col < DCTSIZE; col++) {
+            fmtbl[i] = (FLOAT_MULT_TYPE)
+              ((double) qtbl->quantval[i] *
+               aanscalefactor[row] * aanscalefactor[col]);
+            i++;
+          }
+        }
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Initialize IDCT manager.
+ */
+
+GLOBAL(void)
+jinit_inverse_dct (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct;
+  int ci;
+  jpeg_component_info *compptr;
+
+  idct = (my_idct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                SIZEOF(my_idct_controller));
+  cinfo->idct = (struct jpeg_inverse_dct *) idct;
+  idct->pub.start_pass = start_pass;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate and pre-zero a multiplier table for each component */
+    compptr->dct_table =
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                  SIZEOF(multiplier_table));
+    MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
+    /* Mark multiplier table not yet set up for any method */
+    idct->cur_method[ci] = -1;
+  }
+}