Linux: enable building with a local version of libssl.

net/third_party/nss/ssl/ssl3ecc.c

Index: net/third_party/nss/ssl/ssl3ecc.c
diff --git a/net/third_party/nss/ssl/ssl3ecc.c b/net/third_party/nss/ssl/ssl3ecc.c
new file mode 100644
index 0000000000000000000000000000000000000000..fafecfaf85653179021285d8a6160cc697a67c92
--- /dev/null
+++ b/net/third_party/nss/ssl/ssl3ecc.c
@@ -0,0 +1,1193 @@
+/*
+ * SSL3 Protocol
+ *
+ * ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape security libraries.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1994-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Dr Vipul Gupta <vipul.gupta@sun.com> and
+ *   Douglas Stebila <douglas@stebila.ca>, Sun Microsystems Laboratories
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/* ECC code moved here from ssl3con.c */
+/* $Id: ssl3ecc.c,v 1.22 2008/03/10 00:01:28 wtc%google.com Exp $ */
+
+#include "nss.h"
+#include "cert.h"
+#include "ssl.h"
+#include "cryptohi.h"	/* for DSAU_ stuff */
+#include "keyhi.h"
+#include "secder.h"
+#include "secitem.h"
+
+#include "sslimpl.h"
+#include "sslproto.h"
+#include "sslerr.h"
+#include "prtime.h"
+#include "prinrval.h"
+#include "prerror.h"
+#include "pratom.h"
+#include "prthread.h"
+#include "prinit.h"
+
+#include "pk11func.h"
+#include "secmod.h"
+#include "ec.h"
+#include "blapi.h"
+
+#include <stdio.h>
+
+#ifdef NSS_ENABLE_ECC
+
+#ifndef PK11_SETATTRS
+#define PK11_SETATTRS(x,id,v,l) (x)->type = (id); \
+		(x)->pValue=(v); (x)->ulValueLen = (l);
+#endif
+
+#define SSL_GET_SERVER_PUBLIC_KEY(sock, type) \
+    (ss->serverCerts[type].serverKeyPair ? \
+    ss->serverCerts[type].serverKeyPair->pubKey : NULL)
+
+#define SSL_IS_CURVE_NEGOTIATED(curvemsk, curveName) \
+    ((curveName > ec_noName) && \
+     (curveName < ec_pastLastName) && \
+     ((1UL << curveName) & curvemsk) != 0)
+
+
+
+static SECStatus ssl3_CreateECDHEphemeralKeys(sslSocket *ss, ECName ec_curve);
+
+#define supportedCurve(x) (((x) > ec_noName) && ((x) < ec_pastLastName))
+
+/* Table containing OID tags for elliptic curves named in the
+ * ECC-TLS IETF draft.
+ */
+static const SECOidTag ecName2OIDTag[] = {
+	0,  
+	SEC_OID_SECG_EC_SECT163K1,  /*  1 */
+	SEC_OID_SECG_EC_SECT163R1,  /*  2 */
+	SEC_OID_SECG_EC_SECT163R2,  /*  3 */
+	SEC_OID_SECG_EC_SECT193R1,  /*  4 */
+	SEC_OID_SECG_EC_SECT193R2,  /*  5 */
+	SEC_OID_SECG_EC_SECT233K1,  /*  6 */
+	SEC_OID_SECG_EC_SECT233R1,  /*  7 */
+	SEC_OID_SECG_EC_SECT239K1,  /*  8 */
+	SEC_OID_SECG_EC_SECT283K1,  /*  9 */
+	SEC_OID_SECG_EC_SECT283R1,  /* 10 */
+	SEC_OID_SECG_EC_SECT409K1,  /* 11 */
+	SEC_OID_SECG_EC_SECT409R1,  /* 12 */
+	SEC_OID_SECG_EC_SECT571K1,  /* 13 */
+	SEC_OID_SECG_EC_SECT571R1,  /* 14 */
+	SEC_OID_SECG_EC_SECP160K1,  /* 15 */
+	SEC_OID_SECG_EC_SECP160R1,  /* 16 */
+	SEC_OID_SECG_EC_SECP160R2,  /* 17 */
+	SEC_OID_SECG_EC_SECP192K1,  /* 18 */
+	SEC_OID_SECG_EC_SECP192R1,  /* 19 */
+	SEC_OID_SECG_EC_SECP224K1,  /* 20 */
+	SEC_OID_SECG_EC_SECP224R1,  /* 21 */
+	SEC_OID_SECG_EC_SECP256K1,  /* 22 */
+	SEC_OID_SECG_EC_SECP256R1,  /* 23 */
+	SEC_OID_SECG_EC_SECP384R1,  /* 24 */
+	SEC_OID_SECG_EC_SECP521R1,  /* 25 */
+};
+
+static const PRUint16 curve2bits[] = {
+	  0, /*  ec_noName     = 0,   */
+	163, /*  ec_sect163k1  = 1,   */
+	163, /*  ec_sect163r1  = 2,   */
+	163, /*  ec_sect163r2  = 3,   */
+	193, /*  ec_sect193r1  = 4,   */
+	193, /*  ec_sect193r2  = 5,   */
+	233, /*  ec_sect233k1  = 6,   */
+	233, /*  ec_sect233r1  = 7,   */
+	239, /*  ec_sect239k1  = 8,   */
+	283, /*  ec_sect283k1  = 9,   */
+	283, /*  ec_sect283r1  = 10,  */
+	409, /*  ec_sect409k1  = 11,  */
+	409, /*  ec_sect409r1  = 12,  */
+	571, /*  ec_sect571k1  = 13,  */
+	571, /*  ec_sect571r1  = 14,  */
+	160, /*  ec_secp160k1  = 15,  */
+	160, /*  ec_secp160r1  = 16,  */
+	160, /*  ec_secp160r2  = 17,  */
+	192, /*  ec_secp192k1  = 18,  */
+	192, /*  ec_secp192r1  = 19,  */
+	224, /*  ec_secp224k1  = 20,  */
+	224, /*  ec_secp224r1  = 21,  */
+	256, /*  ec_secp256k1  = 22,  */
+	256, /*  ec_secp256r1  = 23,  */
+	384, /*  ec_secp384r1  = 24,  */
+	521, /*  ec_secp521r1  = 25,  */
+      65535  /*  ec_pastLastName      */
+};
+
+typedef struct Bits2CurveStr {
+    PRUint16    bits;
+    ECName      curve;
+} Bits2Curve;
+
+static const Bits2Curve bits2curve [] = {
+   {	192,     ec_secp192r1    /*  = 19,  fast */  },
+   {	160,     ec_secp160r2    /*  = 17,  fast */  },
+   {	160,     ec_secp160k1    /*  = 15,  */       },
+   {	160,     ec_secp160r1    /*  = 16,  */       },
+   {	163,     ec_sect163k1    /*  = 1,   */       },
+   {	163,     ec_sect163r1    /*  = 2,   */       },
+   {	163,     ec_sect163r2    /*  = 3,   */       },
+   {	192,     ec_secp192k1    /*  = 18,  */       },
+   {	193,     ec_sect193r1    /*  = 4,   */       },
+   {	193,     ec_sect193r2    /*  = 5,   */       },
+   {	224,     ec_secp224r1    /*  = 21,  fast */  },
+   {	224,     ec_secp224k1    /*  = 20,  */       },
+   {	233,     ec_sect233k1    /*  = 6,   */       },
+   {	233,     ec_sect233r1    /*  = 7,   */       },
+   {	239,     ec_sect239k1    /*  = 8,   */       },
+   {	256,     ec_secp256r1    /*  = 23,  fast */  },
+   {	256,     ec_secp256k1    /*  = 22,  */       },
+   {	283,     ec_sect283k1    /*  = 9,   */       },
+   {	283,     ec_sect283r1    /*  = 10,  */       },
+   {	384,     ec_secp384r1    /*  = 24,  fast */  },
+   {	409,     ec_sect409k1    /*  = 11,  */       },
+   {	409,     ec_sect409r1    /*  = 12,  */       },
+   {	521,     ec_secp521r1    /*  = 25,  fast */  },
+   {	571,     ec_sect571k1    /*  = 13,  */       },
+   {	571,     ec_sect571r1    /*  = 14,  */       },
+   {  65535,     ec_noName    }
+};
+
+typedef struct ECDHEKeyPairStr {
+    ssl3KeyPair *  pair;
+    int            error;  /* error code of the call-once function */
+    PRCallOnceType once;
+} ECDHEKeyPair;
+
+/* arrays of ECDHE KeyPairs */
+static ECDHEKeyPair gECDHEKeyPairs[ec_pastLastName];
+
+SECStatus 
+ssl3_ECName2Params(PRArenaPool * arena, ECName curve, SECKEYECParams * params)
+{
+    SECOidData *oidData = NULL;
+
+    if ((curve <= ec_noName) || (curve >= ec_pastLastName) ||
+	((oidData = SECOID_FindOIDByTag(ecName2OIDTag[curve])) == NULL)) {
+        PORT_SetError(SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE);
+	return SECFailure;
+    }
+
+    SECITEM_AllocItem(arena, params, (2 + oidData->oid.len));
+    /* 
+     * params->data needs to contain the ASN encoding of an object ID (OID)
+     * representing the named curve. The actual OID is in 
+     * oidData->oid.data so we simply prepend 0x06 and OID length
+     */
+    params->data[0] = SEC_ASN1_OBJECT_ID;
+    params->data[1] = oidData->oid.len;
+    memcpy(params->data + 2, oidData->oid.data, oidData->oid.len);
+
+    return SECSuccess;
+}
+
+static ECName 
+params2ecName(SECKEYECParams * params)
+{
+    SECItem oid = { siBuffer, NULL, 0};
+    SECOidData *oidData = NULL;
+    ECName i;
+
+    /* 
+     * params->data needs to contain the ASN encoding of an object ID (OID)
+     * representing a named curve. Here, we strip away everything
+     * before the actual OID and use the OID to look up a named curve.
+     */
+    if (params->data[0] != SEC_ASN1_OBJECT_ID) return ec_noName;
+    oid.len = params->len - 2;
+    oid.data = params->data + 2;
+    if ((oidData = SECOID_FindOID(&oid)) == NULL) return ec_noName;
+    for (i = ec_noName + 1; i < ec_pastLastName; i++) {
+	if (ecName2OIDTag[i] == oidData->offset)
+	    return i;
+    }
+
+    return ec_noName;
+}
+
+/* Caller must set hiLevel error code. */
+static SECStatus
+ssl3_ComputeECDHKeyHash(SECItem ec_params, SECItem server_ecpoint,
+			     SSL3Random *client_rand, SSL3Random *server_rand,
+			     SSL3Hashes *hashes, PRBool bypassPKCS11)
+{
+    PRUint8     * hashBuf;
+    PRUint8     * pBuf;
+    SECStatus     rv 		= SECSuccess;
+    unsigned int  bufLen;
+    /*
+     * XXX For now, we only support named curves (the appropriate
+     * checks are made before this method is called) so ec_params
+     * takes up only two bytes. ECPoint needs to fit in 256 bytes
+     * (because the spec says the length must fit in one byte)
+     */
+    PRUint8       buf[2*SSL3_RANDOM_LENGTH + 2 + 1 + 256];
+
+    bufLen = 2*SSL3_RANDOM_LENGTH + ec_params.len + 1 + server_ecpoint.len;
+    if (bufLen <= sizeof buf) {
+    	hashBuf = buf;
+    } else {
+    	hashBuf = PORT_Alloc(bufLen);
+	if (!hashBuf) {
+	    return SECFailure;
+	}
+    }
+
+    memcpy(hashBuf, client_rand, SSL3_RANDOM_LENGTH); 
+    	pBuf = hashBuf + SSL3_RANDOM_LENGTH;
+    memcpy(pBuf, server_rand, SSL3_RANDOM_LENGTH);
+    	pBuf += SSL3_RANDOM_LENGTH;
+    memcpy(pBuf, ec_params.data, ec_params.len);
+    	pBuf += ec_params.len;
+    pBuf[0] = (PRUint8)(server_ecpoint.len);
+    pBuf += 1;
+    memcpy(pBuf, server_ecpoint.data, server_ecpoint.len);
+    	pBuf += server_ecpoint.len;
+    PORT_Assert((unsigned int)(pBuf - hashBuf) == bufLen);
+
+    rv = ssl3_ComputeCommonKeyHash(hashBuf, bufLen, hashes, bypassPKCS11);
+
+    PRINT_BUF(95, (NULL, "ECDHkey hash: ", hashBuf, bufLen));
+    PRINT_BUF(95, (NULL, "ECDHkey hash: MD5 result", hashes->md5, MD5_LENGTH));
+    PRINT_BUF(95, (NULL, "ECDHkey hash: SHA1 result", hashes->sha, SHA1_LENGTH));
+
+    if (hashBuf != buf && hashBuf != NULL)
+    	PORT_Free(hashBuf);
+    return rv;
+}
+
+
+/* Called from ssl3_SendClientKeyExchange(). */
+SECStatus
+ssl3_SendECDHClientKeyExchange(sslSocket * ss, SECKEYPublicKey * svrPubKey)
+{
+    PK11SymKey *	pms 		= NULL;
+    SECStatus           rv    		= SECFailure;
+    PRBool              isTLS;
+    CK_MECHANISM_TYPE	target;
+    SECKEYPublicKey	*pubKey = NULL;		/* Ephemeral ECDH key */
+    SECKEYPrivateKey	*privKey = NULL;	/* Ephemeral ECDH key */
+
+    PORT_Assert( ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss) );
+    PORT_Assert( ss->opt.noLocks || ssl_HaveXmitBufLock(ss));
+
+    isTLS = (PRBool)(ss->ssl3.pwSpec->version > SSL_LIBRARY_VERSION_3_0);
+
+    /* Generate ephemeral EC keypair */
+    if (svrPubKey->keyType != ecKey) {
+	PORT_SetError(SEC_ERROR_BAD_KEY);
+	goto loser;
+    }
+    /* XXX SHOULD CALL ssl3_CreateECDHEphemeralKeys here, instead! */
+    privKey = SECKEY_CreateECPrivateKey(&svrPubKey->u.ec.DEREncodedParams, 
+	                                &pubKey, NULL);
+    if (!privKey || !pubKey) {
+	    ssl_MapLowLevelError(SEC_ERROR_KEYGEN_FAIL);
+	    rv = SECFailure;
+	    goto loser;
+    }
+    PRINT_BUF(50, (ss, "ECDH public value:",
+					pubKey->u.ec.publicValue.data,
+					pubKey->u.ec.publicValue.len));
+
+    if (isTLS) target = CKM_TLS_MASTER_KEY_DERIVE_DH;
+    else target = CKM_SSL3_MASTER_KEY_DERIVE_DH;
+
+    /*  Determine the PMS */
+    pms = PK11_PubDeriveWithKDF(privKey, svrPubKey, PR_FALSE, NULL, NULL,
+			    CKM_ECDH1_DERIVE, target, CKA_DERIVE, 0,
+			    CKD_NULL, NULL, NULL);
+
+    if (pms == NULL) {
+	SSL3AlertDescription desc  = illegal_parameter;
+	(void)SSL3_SendAlert(ss, alert_fatal, desc);
+	ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE);
+	goto loser;
+    }
+
+    SECKEY_DestroyPrivateKey(privKey);
+    privKey = NULL;
+
+    rv = ssl3_InitPendingCipherSpec(ss,  pms);
+    PK11_FreeSymKey(pms); pms = NULL;
+
+    if (rv != SECSuccess) {
+	ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE);
+	goto loser;
+    }
+
+    rv = ssl3_AppendHandshakeHeader(ss, client_key_exchange, 
+					pubKey->u.ec.publicValue.len + 1);
+    if (rv != SECSuccess) {
+        goto loser;	/* err set by ssl3_AppendHandshake* */
+    }
+
+    rv = ssl3_AppendHandshakeVariable(ss, 
+					pubKey->u.ec.publicValue.data,
+					pubKey->u.ec.publicValue.len, 1);
+    SECKEY_DestroyPublicKey(pubKey);
+    pubKey = NULL;
+
+    if (rv != SECSuccess) {
+        goto loser;	/* err set by ssl3_AppendHandshake* */
+    }
+
+    rv = SECSuccess;
+
+loser:
+    if(pms) PK11_FreeSymKey(pms);
+    if(privKey) SECKEY_DestroyPrivateKey(privKey);
+    if(pubKey) SECKEY_DestroyPublicKey(pubKey);
+    return rv;
+}
+
+
+/*
+** Called from ssl3_HandleClientKeyExchange()
+*/
+SECStatus
+ssl3_HandleECDHClientKeyExchange(sslSocket *ss, SSL3Opaque *b,
+				     PRUint32 length,
+                                     SECKEYPublicKey *srvrPubKey,
+                                     SECKEYPrivateKey *srvrPrivKey)
+{
+    PK11SymKey *      pms;
+    SECStatus         rv;
+    SECKEYPublicKey   clntPubKey;
+    CK_MECHANISM_TYPE	target;
+    PRBool isTLS;
+
+    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );
+    PORT_Assert( ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss) );
+
+    clntPubKey.keyType = ecKey;
+    clntPubKey.u.ec.DEREncodedParams.len = 
+	srvrPubKey->u.ec.DEREncodedParams.len;
+    clntPubKey.u.ec.DEREncodedParams.data = 
+	srvrPubKey->u.ec.DEREncodedParams.data;
+
+    rv = ssl3_ConsumeHandshakeVariable(ss, &clntPubKey.u.ec.publicValue, 
+	                               1, &b, &length);
+    if (rv != SECSuccess) {
+	SEND_ALERT
+	return SECFailure;	/* XXX Who sets the error code?? */
+    }
+
+    isTLS = (PRBool)(ss->ssl3.prSpec->version > SSL_LIBRARY_VERSION_3_0);
+
+    if (isTLS) target = CKM_TLS_MASTER_KEY_DERIVE_DH;
+    else target = CKM_SSL3_MASTER_KEY_DERIVE_DH;
+
+    /*  Determine the PMS */
+    pms = PK11_PubDeriveWithKDF(srvrPrivKey, &clntPubKey, PR_FALSE, NULL, NULL,
+			    CKM_ECDH1_DERIVE, target, CKA_DERIVE, 0,
+			    CKD_NULL, NULL, NULL);
+
+    if (pms == NULL) {
+	/* last gasp.  */
+	ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE);
+	return SECFailure;
+    }
+
+    rv = ssl3_InitPendingCipherSpec(ss,  pms);
+    PK11_FreeSymKey(pms);
+    if (rv != SECSuccess) {
+	SEND_ALERT
+	return SECFailure; /* error code set by ssl3_InitPendingCipherSpec */
+    }
+    return SECSuccess;
+}
+
+ECName
+ssl3_GetCurveWithECKeyStrength(PRUint32 curvemsk, int requiredECCbits)
+{
+    int    i;
+    
+    for ( i = 0; bits2curve[i].curve != ec_noName; i++) {
+	if (bits2curve[i].bits < requiredECCbits)
+	    continue;
+    	if (SSL_IS_CURVE_NEGOTIATED(curvemsk, bits2curve[i].curve)) {
+	    return bits2curve[i].curve;
+	}
+    }
+    PORT_SetError(SSL_ERROR_NO_CYPHER_OVERLAP);
+    return ec_noName;
+}
+
+/* find the "weakest link".  Get strength of signature key and of sym key.
+ * choose curve for the weakest of those two.
+ */
+ECName
+ssl3_GetCurveNameForServerSocket(sslSocket *ss)
+{
+    SECKEYPublicKey * svrPublicKey = NULL;
+    ECName ec_curve = ec_noName;
+    int    signatureKeyStrength = 521;
+    int    requiredECCbits = ss->sec.secretKeyBits * 2;
+
+    if (ss->ssl3.hs.kea_def->kea == kea_ecdhe_ecdsa) {
+	svrPublicKey = SSL_GET_SERVER_PUBLIC_KEY(ss, kt_ecdh);
+	if (svrPublicKey)
+	    ec_curve = params2ecName(&svrPublicKey->u.ec.DEREncodedParams);
+	if (!SSL_IS_CURVE_NEGOTIATED(ss->ssl3.hs.negotiatedECCurves, ec_curve)) {
+	    PORT_SetError(SSL_ERROR_NO_CYPHER_OVERLAP);
+	    return ec_noName;
+	}
+	signatureKeyStrength = curve2bits[ ec_curve ];
+    } else {
+        /* RSA is our signing cert */
+        int serverKeyStrengthInBits;
+ 
+        svrPublicKey = SSL_GET_SERVER_PUBLIC_KEY(ss, kt_rsa);
+        if (!svrPublicKey) {
+            PORT_SetError(SSL_ERROR_NO_CYPHER_OVERLAP);
+            return ec_noName;
+        }
+ 
+        /* currently strength in bytes */
+        serverKeyStrengthInBits = svrPublicKey->u.rsa.modulus.len;
+        if (svrPublicKey->u.rsa.modulus.data[0] == 0) {
+            serverKeyStrengthInBits--;
+        }
+        /* convert to strength in bits */
+        serverKeyStrengthInBits *= BPB;
+ 
+        signatureKeyStrength =
+	    SSL_RSASTRENGTH_TO_ECSTRENGTH(serverKeyStrengthInBits);
+    }
+    if ( requiredECCbits > signatureKeyStrength ) 
+         requiredECCbits = signatureKeyStrength;
+
+    return ssl3_GetCurveWithECKeyStrength(ss->ssl3.hs.negotiatedECCurves,
+					  requiredECCbits);
+}
+
+/* function to clear out the lists */
+static SECStatus 
+ssl3_ShutdownECDHECurves(void *appData, void *nssData)
+{
+    int i;
+    ECDHEKeyPair *keyPair = &gECDHEKeyPairs[0];
+
+    for (i=0; i < ec_pastLastName; i++, keyPair++) {
+	if (keyPair->pair) {
+	    ssl3_FreeKeyPair(keyPair->pair);
+	}
+    }
+    memset(gECDHEKeyPairs, 0, sizeof gECDHEKeyPairs);
+    return SECSuccess;
+}
+
+static PRStatus
+ssl3_ECRegister(void)
+{
+    SECStatus rv;
+    rv = NSS_RegisterShutdown(ssl3_ShutdownECDHECurves, gECDHEKeyPairs);
+    if (rv != SECSuccess) {
+	gECDHEKeyPairs[ec_noName].error = PORT_GetError();
+    }
+    return (PRStatus)rv;
+}
+
+/* CallOnce function, called once for each named curve. */
+static PRStatus 
+ssl3_CreateECDHEphemeralKeyPair(void * arg)
+{
+    SECKEYPrivateKey *    privKey  = NULL;
+    SECKEYPublicKey *     pubKey   = NULL;
+    ssl3KeyPair *	  keyPair  = NULL;
+    ECName                ec_curve = (ECName)arg;
+    SECKEYECParams        ecParams = { siBuffer, NULL, 0 };
+
+    PORT_Assert(gECDHEKeyPairs[ec_curve].pair == NULL);
+
+    /* ok, no one has generated a global key for this curve yet, do so */
+    if (ssl3_ECName2Params(NULL, ec_curve, &ecParams) != SECSuccess) {
+	gECDHEKeyPairs[ec_curve].error = PORT_GetError();
+	return PR_FAILURE;
+    }
+
+    privKey = SECKEY_CreateECPrivateKey(&ecParams, &pubKey, NULL);    
+    SECITEM_FreeItem(&ecParams, PR_FALSE);
+
+    if (!privKey || !pubKey || !(keyPair = ssl3_NewKeyPair(privKey, pubKey))) {
+	if (privKey) {
+	    SECKEY_DestroyPrivateKey(privKey);
+	}
+	if (pubKey) {
+	    SECKEY_DestroyPublicKey(pubKey);
+	}
+	ssl_MapLowLevelError(SEC_ERROR_KEYGEN_FAIL);
+	gECDHEKeyPairs[ec_curve].error = PORT_GetError();
+	return PR_FAILURE;
+    }
+
+    gECDHEKeyPairs[ec_curve].pair = keyPair;
+    return PR_SUCCESS;
+}
+
+/*
+ * Creates the ephemeral public and private ECDH keys used by
+ * server in ECDHE_RSA and ECDHE_ECDSA handshakes.
+ * For now, the elliptic curve is chosen to be the same
+ * strength as the signing certificate (ECC or RSA).
+ * We need an API to specify the curve. This won't be a real
+ * issue until we further develop server-side support for ECC
+ * cipher suites.
+ */
+static SECStatus
+ssl3_CreateECDHEphemeralKeys(sslSocket *ss, ECName ec_curve)
+{
+    ssl3KeyPair *	  keyPair        = NULL;
+
+    /* if there's no global key for this curve, make one. */
+    if (gECDHEKeyPairs[ec_curve].pair == NULL) {
+	PRStatus status;
+
+	status = PR_CallOnce(&gECDHEKeyPairs[ec_noName].once, ssl3_ECRegister);
+        if (status != PR_SUCCESS) {
+	    PORT_SetError(gECDHEKeyPairs[ec_noName].error);
+	    return SECFailure;
+    	}
+	status = PR_CallOnceWithArg(&gECDHEKeyPairs[ec_curve].once,
+	                            ssl3_CreateECDHEphemeralKeyPair,
+				    (void *)ec_curve);
+        if (status != PR_SUCCESS) {
+	    PORT_SetError(gECDHEKeyPairs[ec_curve].error);
+	    return SECFailure;
+    	}
+    }
+
+    keyPair = gECDHEKeyPairs[ec_curve].pair;
+    PORT_Assert(keyPair != NULL);
+    if (!keyPair) 
+    	return SECFailure;
+    ss->ephemeralECDHKeyPair = ssl3_GetKeyPairRef(keyPair);
+
+    return SECSuccess;
+}
+
+SECStatus
+ssl3_HandleECDHServerKeyExchange(sslSocket *ss, SSL3Opaque *b, PRUint32 length)
+{
+    PRArenaPool *    arena     = NULL;
+    SECKEYPublicKey *peerKey   = NULL;
+    PRBool           isTLS;
+    SECStatus        rv;
+    int              errCode   = SSL_ERROR_RX_MALFORMED_SERVER_KEY_EXCH;
+    SSL3AlertDescription desc  = illegal_parameter;
+    SSL3Hashes       hashes;
+    SECItem          signature = {siBuffer, NULL, 0};
+
+    SECItem          ec_params = {siBuffer, NULL, 0};
+    SECItem          ec_point  = {siBuffer, NULL, 0};
+    unsigned char    paramBuf[3]; /* only for curve_type == named_curve */
+
+    isTLS = (PRBool)(ss->ssl3.prSpec->version > SSL_LIBRARY_VERSION_3_0);
+
+    /* XXX This works only for named curves, revisit this when
+     * we support generic curves.
+     */
+    ec_params.len  = sizeof paramBuf;
+    ec_params.data = paramBuf;
+    rv = ssl3_ConsumeHandshake(ss, ec_params.data, ec_params.len, &b, &length);
+    if (rv != SECSuccess) {
+	goto loser;		/* malformed. */
+    }
+
+    /* Fail if the curve is not a named curve */
+    if ((ec_params.data[0] != ec_type_named) || 
+	(ec_params.data[1] != 0) ||
+	!supportedCurve(ec_params.data[2])) {
+	    errCode = SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE;
+	    desc = handshake_failure;
+	    goto alert_loser;
+    }
+
+    rv = ssl3_ConsumeHandshakeVariable(ss, &ec_point, 1, &b, &length);
+    if (rv != SECSuccess) {
+	goto loser;		/* malformed. */
+    }
+    /* Fail if the ec point uses compressed representation */
+    if (ec_point.data[0] != EC_POINT_FORM_UNCOMPRESSED) {
+	    errCode = SEC_ERROR_UNSUPPORTED_EC_POINT_FORM;
+	    desc = handshake_failure;
+	    goto alert_loser;
+    }
+
+    rv = ssl3_ConsumeHandshakeVariable(ss, &signature, 2, &b, &length);
+    if (rv != SECSuccess) {
+	goto loser;		/* malformed. */
+    }
+
+    if (length != 0) {
+	if (isTLS)
+	    desc = decode_error;
+	goto alert_loser;		/* malformed. */
+    }
+
+    PRINT_BUF(60, (NULL, "Server EC params", ec_params.data, 
+	ec_params.len));
+    PRINT_BUF(60, (NULL, "Server EC point", ec_point.data, ec_point.len));
+
+    /* failures after this point are not malformed handshakes. */
+    /* TLS: send decrypt_error if signature failed. */
+    desc = isTLS ? decrypt_error : handshake_failure;
+
+    /*
+     *  check to make sure the hash is signed by right guy
+     */
+    rv = ssl3_ComputeECDHKeyHash(ec_params, ec_point,
+				      &ss->ssl3.hs.client_random,
+				      &ss->ssl3.hs.server_random, 
+				      &hashes, ss->opt.bypassPKCS11);
+
+    if (rv != SECSuccess) {
+	errCode =
+	    ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE);
+	goto alert_loser;
+    }
+    rv = ssl3_VerifySignedHashes(&hashes, ss->sec.peerCert, &signature,
+				isTLS, ss->pkcs11PinArg);
+    if (rv != SECSuccess)  {
+	errCode =
+	    ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE);
+	goto alert_loser;
+    }
+
+    arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
+    if (arena == NULL) {
+	goto no_memory;
+    }
+
+    ss->sec.peerKey = peerKey = PORT_ArenaZNew(arena, SECKEYPublicKey);
+    if (peerKey == NULL) {
+	goto no_memory;
+    }
+
+    peerKey->arena                 = arena;
+    peerKey->keyType               = ecKey;
+
+    /* set up EC parameters in peerKey */
+    if (ssl3_ECName2Params(arena, ec_params.data[2], 
+	    &peerKey->u.ec.DEREncodedParams) != SECSuccess) {
+	/* we should never get here since we already 
+	 * checked that we are dealing with a supported curve
+	 */
+	errCode = SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE;
+	goto alert_loser;
+    }
+
+    /* copy publicValue in peerKey */
+    if (SECITEM_CopyItem(arena, &peerKey->u.ec.publicValue,  &ec_point))
+    {
+	PORT_FreeArena(arena, PR_FALSE);
+	goto no_memory;
+    }
+    peerKey->pkcs11Slot         = NULL;
+    peerKey->pkcs11ID           = CK_INVALID_HANDLE;
+
+    ss->sec.peerKey = peerKey;
+    ss->ssl3.hs.ws = wait_cert_request;
+
+    return SECSuccess;
+
+alert_loser:
+    (void)SSL3_SendAlert(ss, alert_fatal, desc);
+loser:
+    PORT_SetError( errCode );
+    return SECFailure;
+
+no_memory:	/* no-memory error has already been set. */
+    ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE);
+    return SECFailure;
+}
+
+SECStatus
+ssl3_SendECDHServerKeyExchange(sslSocket *ss)
+{
+const ssl3KEADef *     kea_def     = ss->ssl3.hs.kea_def;
+    SECStatus          rv          = SECFailure;
+    int                length;
+    PRBool             isTLS;
+    SECItem            signed_hash = {siBuffer, NULL, 0};
+    SSL3Hashes         hashes;
+
+    SECKEYPublicKey *  ecdhePub;
+    SECItem            ec_params = {siBuffer, NULL, 0};
+    unsigned char      paramBuf[3];
+    ECName             curve;
+    SSL3KEAType        certIndex;
+
+
+    /* Generate ephemeral ECDH key pair and send the public key */
+    curve = ssl3_GetCurveNameForServerSocket(ss);
+    if (curve == ec_noName) {
+    	goto loser;
+    }
+    rv = ssl3_CreateECDHEphemeralKeys(ss, curve);
+    if (rv != SECSuccess) {
+	goto loser; 	/* err set by AppendHandshake. */
+    }	    
+    ecdhePub = ss->ephemeralECDHKeyPair->pubKey;
+    PORT_Assert(ecdhePub != NULL);
+    if (!ecdhePub) {
+	PORT_SetError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE);
+	return SECFailure;
+    }	
+    
+    ec_params.len  = sizeof paramBuf;
+    ec_params.data = paramBuf;
+    curve = params2ecName(&ecdhePub->u.ec.DEREncodedParams);
+    if (curve != ec_noName) {
+	ec_params.data[0] = ec_type_named;
+	ec_params.data[1] = 0x00;
+	ec_params.data[2] = curve;
+    } else {
+	PORT_SetError(SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE);
+	goto loser;
+    }		
+
+    rv = ssl3_ComputeECDHKeyHash(ec_params, ecdhePub->u.ec.publicValue,
+				      &ss->ssl3.hs.client_random,
+				      &ss->ssl3.hs.server_random,
+				      &hashes, ss->opt.bypassPKCS11);
+    if (rv != SECSuccess) {
+	ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE);
+	goto loser;
+    }
+
+    isTLS = (PRBool)(ss->ssl3.pwSpec->version > SSL_LIBRARY_VERSION_3_0);
+
+    /* XXX SSLKEAType isn't really a good choice for 
+     * indexing certificates but that's all we have
+     * for now.
+     */
+    if (kea_def->kea == kea_ecdhe_rsa)
+	certIndex = kt_rsa;
+    else /* kea_def->kea == kea_ecdhe_ecdsa */
+	certIndex = kt_ecdh;
+
+    rv = ssl3_SignHashes(&hashes, ss->serverCerts[certIndex].SERVERKEY, 
+			 &signed_hash, isTLS);
+    if (rv != SECSuccess) {
+	goto loser;		/* ssl3_SignHashes has set err. */
+    }
+    if (signed_hash.data == NULL) {
+	/* how can this happen and rv == SECSuccess ?? */
+	PORT_SetError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE);
+	goto loser;
+    }
+
+    length = ec_params.len + 
+	     1 + ecdhePub->u.ec.publicValue.len + 
+	     2 + signed_hash.len;
+
+    rv = ssl3_AppendHandshakeHeader(ss, server_key_exchange, length);
+    if (rv != SECSuccess) {
+	goto loser; 	/* err set by AppendHandshake. */
+    }
+
+    rv = ssl3_AppendHandshake(ss, ec_params.data, ec_params.len);
+    if (rv != SECSuccess) {
+	goto loser; 	/* err set by AppendHandshake. */
+    }
+
+    rv = ssl3_AppendHandshakeVariable(ss, ecdhePub->u.ec.publicValue.data,
+				      ecdhePub->u.ec.publicValue.len, 1);
+    if (rv != SECSuccess) {
+	goto loser; 	/* err set by AppendHandshake. */
+    }
+
+    rv = ssl3_AppendHandshakeVariable(ss, signed_hash.data,
+				      signed_hash.len, 2);
+    if (rv != SECSuccess) {
+	goto loser; 	/* err set by AppendHandshake. */
+    }
+
+    PORT_Free(signed_hash.data);
+    return SECSuccess;
+
+loser:
+    if (signed_hash.data != NULL) 
+    	PORT_Free(signed_hash.data);
+    return SECFailure;
+}
+
+/* Lists of ECC cipher suites for searching and disabling. */
+
+static const ssl3CipherSuite ecdh_suites[] = {
+    TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_NULL_SHA,
+    TLS_ECDH_ECDSA_WITH_RC4_128_SHA,
+    TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDH_RSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDH_RSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDH_RSA_WITH_NULL_SHA,
+    TLS_ECDH_RSA_WITH_RC4_128_SHA,
+    0 /* end of list marker */
+};
+
+static const ssl3CipherSuite ecdh_ecdsa_suites[] = {
+    TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_NULL_SHA,
+    TLS_ECDH_ECDSA_WITH_RC4_128_SHA,
+    0 /* end of list marker */
+};
+
+static const ssl3CipherSuite ecdh_rsa_suites[] = {
+    TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDH_RSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDH_RSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDH_RSA_WITH_NULL_SHA,
+    TLS_ECDH_RSA_WITH_RC4_128_SHA,
+    0 /* end of list marker */
+};
+
+static const ssl3CipherSuite ecdhe_ecdsa_suites[] = {
+    TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDHE_ECDSA_WITH_NULL_SHA,
+    TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,
+    0 /* end of list marker */
+};
+
+static const ssl3CipherSuite ecdhe_rsa_suites[] = {
+    TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDHE_RSA_WITH_NULL_SHA,
+    TLS_ECDHE_RSA_WITH_RC4_128_SHA,
+    0 /* end of list marker */
+};
+
+/* List of all ECC cipher suites */
+static const ssl3CipherSuite ecSuites[] = {
+    TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDHE_ECDSA_WITH_NULL_SHA,
+    TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,
+    TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDHE_RSA_WITH_NULL_SHA,
+    TLS_ECDHE_RSA_WITH_RC4_128_SHA,
+    TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDH_ECDSA_WITH_NULL_SHA,
+    TLS_ECDH_ECDSA_WITH_RC4_128_SHA,
+    TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA,
+    TLS_ECDH_RSA_WITH_AES_128_CBC_SHA,
+    TLS_ECDH_RSA_WITH_AES_256_CBC_SHA,
+    TLS_ECDH_RSA_WITH_NULL_SHA,
+    TLS_ECDH_RSA_WITH_RC4_128_SHA,
+    0 /* end of list marker */
+};
+
+/* On this socket, Disable the ECC cipher suites in the argument's list */
+SECStatus
+ssl3_DisableECCSuites(sslSocket * ss, const ssl3CipherSuite * suite)
+{
+    if (!suite)
+    	suite = ecSuites;
+    for (; *suite; ++suite) {
+	SECStatus rv      = ssl3_CipherPrefSet(ss, *suite, PR_FALSE);
+
+	PORT_Assert(rv == SECSuccess); /* else is coding error */
+    }
+    return SECSuccess;
+}
+
+/* Look at the server certs configured on this socket, and disable any
+ * ECC cipher suites that are not supported by those certs.
+ */
+void
+ssl3_FilterECCipherSuitesByServerCerts(sslSocket * ss)
+{
+    CERTCertificate * svrCert;
+
+    svrCert = ss->serverCerts[kt_rsa].serverCert;
+    if (!svrCert) {
+	ssl3_DisableECCSuites(ss, ecdhe_rsa_suites);
+    }
+
+    svrCert = ss->serverCerts[kt_ecdh].serverCert;
+    if (!svrCert) {
+	ssl3_DisableECCSuites(ss, ecdh_suites);
+	ssl3_DisableECCSuites(ss, ecdhe_ecdsa_suites);
+    } else {
+	SECOidTag sigTag = SECOID_GetAlgorithmTag(&svrCert->signature);
+
+	switch (sigTag) {
+	case SEC_OID_PKCS1_RSA_ENCRYPTION:
+	case SEC_OID_PKCS1_MD2_WITH_RSA_ENCRYPTION:
+	case SEC_OID_PKCS1_MD4_WITH_RSA_ENCRYPTION:
+	case SEC_OID_PKCS1_MD5_WITH_RSA_ENCRYPTION:
+	case SEC_OID_PKCS1_SHA1_WITH_RSA_ENCRYPTION:
+	case SEC_OID_PKCS1_SHA256_WITH_RSA_ENCRYPTION:
+	case SEC_OID_PKCS1_SHA384_WITH_RSA_ENCRYPTION:
+	case SEC_OID_PKCS1_SHA512_WITH_RSA_ENCRYPTION:
+	    ssl3_DisableECCSuites(ss, ecdh_ecdsa_suites);
+	    break;
+	case SEC_OID_ANSIX962_ECDSA_SHA1_SIGNATURE:
+	case SEC_OID_ANSIX962_ECDSA_SHA224_SIGNATURE:
+	case SEC_OID_ANSIX962_ECDSA_SHA256_SIGNATURE:
+	case SEC_OID_ANSIX962_ECDSA_SHA384_SIGNATURE:
+	case SEC_OID_ANSIX962_ECDSA_SHA512_SIGNATURE:
+	case SEC_OID_ANSIX962_ECDSA_SIGNATURE_RECOMMENDED_DIGEST:
+	case SEC_OID_ANSIX962_ECDSA_SIGNATURE_SPECIFIED_DIGEST:
+	    ssl3_DisableECCSuites(ss, ecdh_rsa_suites);
+	    break;
+	default:
+	    ssl3_DisableECCSuites(ss, ecdh_suites);
+	    break;
+	}
+    }
+}
+
+/* Ask: is ANY ECC cipher suite enabled on this socket? */
+/* Order(N^2).  Yuk.  Also, this ignores export policy. */
+PRBool
+ssl3_IsECCEnabled(sslSocket * ss)
+{
+    const ssl3CipherSuite * suite;
+
+    for (suite = ecSuites; *suite; ++suite) {
+	PRBool    enabled = PR_FALSE;
+	SECStatus rv      = ssl3_CipherPrefGet(ss, *suite, &enabled);
+
+	PORT_Assert(rv == SECSuccess); /* else is coding error */
+	if (rv == SECSuccess && enabled)
+	    return PR_TRUE;
+    }
+    return PR_FALSE;
+}
+
+#define BE(n) 0, n
+
+#ifndef NSS_ECC_MORE_THAN_SUITE_B
+/* Prefabricated TLS client hello extension, Elliptic Curves List,
+ * offers only 3 curves, the Suite B curves, 23-25 
+ */
+static const PRUint8 EClist[12] = {
+    BE(10),         /* Extension type */
+    BE( 8),         /* octets that follow ( 3 pairs + 1 length pair) */
+    BE( 6),         /* octets that follow ( 3 pairs) */
+    BE(23), BE(24), BE(25)
+};
+#else
+/* Prefabricated TLS client hello extension, Elliptic Curves List,
+ * offers curves 1-25.
+ */
+static const PRUint8 EClist[56] = {
+    BE(10),         /* Extension type */
+    BE(52),         /* octets that follow (25 pairs + 1 length pair) */
+    BE(50),         /* octets that follow (25 pairs) */
+            BE( 1), BE( 2), BE( 3), BE( 4), BE( 5), BE( 6), BE( 7), 
+    BE( 8), BE( 9), BE(10), BE(11), BE(12), BE(13), BE(14), BE(15), 
+    BE(16), BE(17), BE(18), BE(19), BE(20), BE(21), BE(22), BE(23), 
+    BE(24), BE(25)
+};
+#endif
+
+static const PRUint8 ECPtFmt[6] = {
+    BE(11),         /* Extension type */
+    BE( 2),         /* octets that follow */
+             1,     /* octets that follow */
+                 0  /* uncompressed type only */
+};
+
+/* Send our "canned" (precompiled) Supported Elliptic Curves extension,
+ * which says that we support all TLS-defined named curves.
+ */
+PRInt32
+ssl3_SendSupportedCurvesXtn(
+			sslSocket * ss,
+			PRBool      append,
+			PRUint32    maxBytes)
+{
+    if (!ss || !ssl3_IsECCEnabled(ss))
+    	return 0;
+    if (append && maxBytes >= (sizeof EClist)) {
+	SECStatus rv = ssl3_AppendHandshake(ss, EClist, (sizeof EClist));
+	if (rv != SECSuccess)
+	    return -1;
+	if (!ss->sec.isServer) {
+	    TLSExtensionData *xtnData = &ss->xtnData;
+	    xtnData->advertised[xtnData->numAdvertised++] =
+		elliptic_curves_xtn;
+	}
+    }
+    return (sizeof EClist);
+}
+
+/* Send our "canned" (precompiled) Supported Point Formats extension,
+ * which says that we only support uncompressed points.
+ */
+PRInt32
+ssl3_SendSupportedPointFormatsXtn(
+			sslSocket * ss,
+			PRBool      append,
+			PRUint32    maxBytes)
+{
+    if (!ss || !ssl3_IsECCEnabled(ss))
+    	return 0;
+    if (append && maxBytes >= (sizeof ECPtFmt)) {
+	SECStatus rv = ssl3_AppendHandshake(ss, ECPtFmt, (sizeof ECPtFmt));
+	if (rv != SECSuccess)
+	    return -1;
+	if (!ss->sec.isServer) {
+	    TLSExtensionData *xtnData = &ss->xtnData;
+	    xtnData->advertised[xtnData->numAdvertised++] =
+		ec_point_formats_xtn;
+	}
+    }
+    return (sizeof ECPtFmt);
+}
+
+/* Just make sure that the remote client supports uncompressed points,
+ * Since that is all we support.  Disable ECC cipher suites if it doesn't.
+ */
+SECStatus
+ssl3_HandleSupportedPointFormatsXtn(sslSocket *ss, PRUint16 ex_type,
+                                    SECItem *data)
+{
+    int i;
+
+    if (data->len < 2 || data->len > 255 || !data->data ||
+        data->len != (unsigned int)data->data[0] + 1) {
+    	/* malformed */
+	goto loser;
+    }
+    for (i = data->len; --i > 0; ) {
+    	if (data->data[i] == 0) {
+	    /* indicate that we should send a reply */
+	    SECStatus rv;
+	    rv = ssl3_RegisterServerHelloExtensionSender(ss, ex_type,
+			      &ssl3_SendSupportedPointFormatsXtn);
+	    return rv;
+	}
+    }
+loser:
+    /* evil client doesn't support uncompressed */
+    ssl3_DisableECCSuites(ss, ecSuites);
+    return SECFailure;
+}
+
+
+#define SSL3_GET_SERVER_PUBLICKEY(sock, type) \
+    (ss->serverCerts[type].serverKeyPair ? \
+    ss->serverCerts[type].serverKeyPair->pubKey : NULL)
+
+/* Extract the TLS curve name for the public key in our EC server cert. */
+ECName ssl3_GetSvrCertCurveName(sslSocket *ss) 
+{
+    SECKEYPublicKey       *srvPublicKey; 
+    ECName		  ec_curve       = ec_noName;
+
+    srvPublicKey = SSL3_GET_SERVER_PUBLICKEY(ss, kt_ecdh);
+    if (srvPublicKey) {
+	ec_curve = params2ecName(&srvPublicKey->u.ec.DEREncodedParams);
+    }
+    return ec_curve;
+}
+
+/* Ensure that the curve in our server cert is one of the ones suppored
+ * by the remote client, and disable all ECC cipher suites if not.
+ */
+SECStatus
+ssl3_HandleSupportedCurvesXtn(sslSocket *ss, PRUint16 ex_type, SECItem *data)
+{
+    PRInt32  list_len;
+    PRUint32 peerCurves   = 0;
+    PRUint32 mutualCurves = 0;
+    PRUint16 svrCertCurveName;
+
+    if (!data->data || data->len < 4 || data->len > 65535)
+    	goto loser;
+    /* get the length of elliptic_curve_list */
+    list_len = ssl3_ConsumeHandshakeNumber(ss, 2, &data->data, &data->len);
+    if (list_len < 0 || data->len != list_len || (data->len % 2) != 0) {
+    	/* malformed */
+	goto loser;
+    }
+    /* build bit vector of peer's supported curve names */
+    while (data->len) {
+	PRInt32  curve_name = 
+		 ssl3_ConsumeHandshakeNumber(ss, 2, &data->data, &data->len);
+	if (curve_name > ec_noName && curve_name < ec_pastLastName) {
+	    peerCurves |= (1U << curve_name);
+	}
+    }
+    /* What curves do we support in common? */
+    mutualCurves = ss->ssl3.hs.negotiatedECCurves &= peerCurves;
+    if (!mutualCurves) { /* no mutually supported EC Curves */
+    	goto loser;
+    }
+
+    /* if our ECC cert doesn't use one of these supported curves, 
+     * disable ECC cipher suites that require an ECC cert. 
+     */
+    svrCertCurveName = ssl3_GetSvrCertCurveName(ss);
+    if (svrCertCurveName != ec_noName &&
+        (mutualCurves & (1U << svrCertCurveName)) != 0) {
+	return SECSuccess;
+    }
+    /* Our EC cert doesn't contain a mutually supported curve.
+     * Disable all ECC cipher suites that require an EC cert 
+     */
+    ssl3_DisableECCSuites(ss, ecdh_ecdsa_suites);
+    ssl3_DisableECCSuites(ss, ecdhe_ecdsa_suites);
+    return SECFailure;
+
+loser:
+    /* no common curve supported */
+    ssl3_DisableECCSuites(ss, ecSuites);
+    return SECFailure;
+}
+
+#endif /* NSS_ENABLE_ECC */