Move bundled copy of sqlite one level deeper to better separate it...

third_party/sqlite/test/temptrigger.test

Index: third_party/sqlite/test/temptrigger.test
===================================================================
--- third_party/sqlite/test/temptrigger.test	(revision 56608)
+++ third_party/sqlite/test/temptrigger.test	(working copy)
@@ -1,204 +0,0 @@
-# 2009 February 27
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# $Id: temptrigger.test,v 1.3 2009/04/15 13:07:19 drh Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-ifcapable {!trigger || !shared_cache} { finish_test ; return }
-
-# Test cases:
-#
-#   temptrigger-1.*: Shared cache problem.
-#   temptrigger-2.*: A similar shared cache problem.
-#   temptrigger-3.*: Attached database problem.
-#
-
-#-------------------------------------------------------------------------
-# Test case temptrigger-1.* demonstrates a problem with temp triggers
-# in shared-cache mode. If process 1 connections to a shared-cache and
-# creates a temp trigger, the temp trigger is linked into the shared-cache
-# schema. If process 2 reloads the shared-cache schema from disk, then
-# it does not recreate the temp trigger belonging to process 1. From the
-# point of view of process 1, the temp trigger just disappeared.
-# 
-#   temptrigger-1.1: In shared cache mode, create a table in the main 
-#                    database and add a temp trigger to it.
-#
-#   temptrigger-1.2: Check that the temp trigger is correctly fired. Check
-#                    that the temp trigger is not fired by statements
-#                    executed by a second connection connected to the 
-#                    same shared cache.
-#
-#   temptrigger-1.3: Using the second connection to the shared-cache, cause
-#                    the shared-cache schema to be reloaded.
-#
-#   temptrigger-1.4: Check that the temp trigger is still fired correctly.
-#
-#   temptrigger-1.5: Check that the temp trigger can be dropped without error.
-#
-db close
-set ::enable_shared_cache [sqlite3_enable_shared_cache]
-sqlite3_enable_shared_cache 1
-
-sqlite3 db test.db
-sqlite3 db2 test.db
-
-do_test temptrigger-1.1 {
-  execsql {
-    CREATE TABLE t1(a, b);
-    CREATE TEMP TABLE tt1(a, b);
-    CREATE TEMP TRIGGER tr1 AFTER INSERT ON t1 BEGIN
-      INSERT INTO tt1 VALUES(new.a, new.b);
-    END;
-  }
-} {}
-
-do_test temptrigger-1.2.1 {
-  execsql { INSERT INTO t1 VALUES(1, 2) }
-  execsql { SELECT * FROM t1 }
-} {1 2}
-do_test temptrigger-1.2.2 {
-  execsql { SELECT * FROM tt1 }
-} {1 2}
-do_test temptrigger-1.2.3 {
-  execsql { INSERT INTO t1 VALUES(3, 4) } db2
-  execsql { SELECT * FROM t1 }
-} {1 2 3 4}
-do_test temptrigger-1.2.4 {
-  execsql { SELECT * FROM tt1 }
-} {1 2}
-
-# Cause the shared-cache schema to be reloaded.
-#
-do_test temptrigger-1.3 {
-  execsql { BEGIN; CREATE TABLE t3(a, b); ROLLBACK; } db2
-} {}
-
-do_test temptrigger-1.4 {
-  execsql { INSERT INTO t1 VALUES(5, 6) }
-  execsql { SELECT * FROM tt1 }
-} {1 2 5 6}
-
-do_test temptrigger-1.5 {
-  # Before the bug was fixed, the following 'DROP TRIGGER' hit an 
-  # assert if executed.
-  #execsql { DROP TRIGGER tr1 }
-} {}
-
-catch {db close}
-catch {db2 close}
-
-#-------------------------------------------------------------------------
-# Tests temptrigger-2.* are similar to temptrigger-1.*, except that
-# temptrigger-2.3 simply opens and closes a connection to the shared-cache.
-# It does not do anything special to cause the schema to be reloaded.
-# 
-do_test temptrigger-2.1 {
-  sqlite3 db test.db
-  execsql {
-    DELETE FROM t1;
-    CREATE TEMP TABLE tt1(a, b);
-    CREATE TEMP TRIGGER tr1 AFTER INSERT ON t1 BEGIN
-      INSERT INTO tt1 VALUES(new.a, new.b);
-    END;
-  }
-} {}
-do_test temptrigger-2.2 {
-  execsql {
-    INSERT INTO t1 VALUES(10, 20);
-    SELECT * FROM tt1;
-  }
-} {10 20}
-do_test temptrigger-2.3 {
-  sqlite3 db2 test.db
-  db2 close
-} {}
-do_test temptrigger-2.4 {
-  execsql {
-    INSERT INTO t1 VALUES(30, 40);
-    SELECT * FROM tt1;
-  }
-} {10 20 30 40}
-do_test temptrigger-2.5 {
-  #execsql { DROP TRIGGER tr1 }
-} {}
-
-catch {db close}
-catch {db2 close}
-sqlite3_enable_shared_cache $::enable_shared_cache
-
-#-------------------------------------------------------------------------
-# Test case temptrigger-3.* demonstrates a problem with temp triggers
-# on tables located in attached databases. At one point when SQLite reloaded 
-# the schema of an attached database (because some other connection had 
-# changed the schema cookie) it was not re-creating temp triggers attached 
-# to tables located within the attached database.
-# 
-#   temptrigger-3.1: Attach database 'test2.db' to connection [db]. Add a
-#                    temp trigger to a table in 'test2.db'.
-#
-#   temptrigger-3.2: Check that the temp trigger is correctly fired.
-#
-#   temptrigger-3.3: Update the schema of 'test2.db' using an external
-#                    connection. This forces [db] to reload the 'test2.db'
-#                    schema. Check that the temp trigger is still fired
-#                    correctly.
-#
-#   temptrigger-3.4: Check that the temp trigger can be dropped without error.
-# 
-do_test temptrigger-3.1 {
-  catch { file delete -force test2.db test2.db-journal }
-  catch { file delete -force test.db test.db-journal }
-  sqlite3 db test.db 
-  sqlite3 db2 test2.db 
-  execsql { CREATE TABLE t2(a, b) } db2
-  execsql {
-    ATTACH 'test2.db' AS aux;
-    CREATE TEMP TABLE tt2(a, b);
-    CREATE TEMP TRIGGER tr2 AFTER INSERT ON aux.t2 BEGIN
-      INSERT INTO tt2 VALUES(new.a, new.b);
-    END;
-  }
-} {}
-
-do_test temptrigger-3.2.1 {
-  execsql { 
-    INSERT INTO aux.t2 VALUES(1, 2);
-    SELECT * FROM aux.t2;
-  }
-} {1 2}
-do_test temptrigger-3.2.2 {
-  execsql { SELECT * FROM tt2 }
-} {1 2}
-
-do_test temptrigger-3.3.1 {
-  execsql { CREATE TABLE t3(a, b) } db2
-  execsql { 
-    INSERT INTO aux.t2 VALUES(3, 4);
-    SELECT * FROM aux.t2;
-  }
-} {1 2 3 4}
-do_test temptrigger-3.3.2 {
-  execsql { SELECT * FROM tt2 }
-} {1 2 3 4}
-
-do_test temptrigger-3.4 {
-  # Before the bug was fixed, the following 'DROP TRIGGER' hit an 
-  # assert if executed.
-  #execsql { DROP TRIGGER tr2 }
-} {}
-
-catch { db close }
-catch { db2 close }
-
-finish_test